120K2/140K2

Motor Graders

Engine 120K2 140K2

Engine Model Cat® C7 ACERT™ Cat C7 ACERT
Base Power (1st gear) – Net 108 kW 145 hp 128 kW 171 hp
Weights – Typically Equipped
Gross Vehicle Weight 13 843 kg 30,519 lb 17 510 kg 38,603 lb
Gross Vehicle Weight – Maximum
Gross Vehicle Weight 17 000 kg 37,478 lb 22 870 kg 50,420 lb
Moldboard
Blade Width 3.7 m 12 ft 3.7 m 12 ft
Cat K Series 2 Features

Cat C7 Engine
Optimum power and fuel efficiency, combined with
Power Management and Electronic Throttle Control,
assure maximum productivity. Cat K Series 2
Motor Graders are certified to Bharat Stage III and
China Stage II emissions standards.

Power Train
The Power Shift transmission features direct drive
and electronic control for smooth, powerful shifts
at any speed.

Balanced Hydraulics
Proportional hydraulic flow gives operators
outstanding “feel” and predictable movements.

Machine Safety
Cat machines are designed with features to
help protect the operator and others around
the job site.

Serviceability
Grouped service points make daily maintenance
easier and faster, while enhanced diagnostics
and monitoring help reduce downtime.

Cat K Series™ 2 Motor Graders are the machines

you can count on when you need to get work done.
Cat motor graders help you make the most of your
investment by delivering maximum productivity and
Contents durability. The Cat C7 engine, direct-drive power shift
Power Train ..........................................................3
transmission and load sensing hydraulics work together
Cat C7 Engine .......................................................3
to ensure the power and precision you need to work in
demanding conditions. And Cat motor graders are backed
Hydraulics ............................................................4

by the world-class Cat dealer network to keep you up

Structures/Drawbar-Circle-Moldboard ..........5
and running.
Work Tools and Attachments ............................6

Operator Station ..................................................7

Integrated Technologies ....................................8

Safety ....................................................................9

Complete Customer Support ...........................10

Sustainability .....................................................10

Serviceability .....................................................11

120K2 Motor Grader Specifications ...............12

140K2 Motor Grader Specifications ...............15

K Series 2 Specifications .................................16

K Series 2 Standard Equipment ......................17

K Series 2 Optional Equipment .......................18

Notes ...................................................................19

2
 Power Train

Reliable performance

Smooth Shifting Transmission

• Full Electronic Clutch Pressure Control ensures
smooth shifting and directional changes.
• Shift Torque Management helps to smooth gear
changes without the use of the inching pedal, helping
the operator to remain focused on the task at hand.
• Load Compensation ensures consistent shift quality
regardless of blade or machine load.
• Optional Autoshift automatically shifts the transmission
at optimal points for easier operation.

Oil Disc Brakes – Completely Sealed, Adjustment Free

Oil-bathed, air actuated and spring-released, located at each
tandem wheel to eliminate power train braking loads and to
reduce service time. The large brake surface area provides
dependable braking capability and extended life before rebuild.

Front Axle with Cat Live Spindle Design

Cat sealed spindle keeps the bearings free from contaminants
and lubricated in a lightweight oil to reduce owning and
operating costs. A larger tapered roller bearing is outboard
where the load is greater, extending bearing life.

Cat C7 Engine
Maximum power and efficiency
Power Management
The Cat C7 engine with ACERT Technology uses
electronic control, precision fuel delivery and refined
air management to provide outstanding performance
and lower emissions.
The Electronic Throttle Control provides easier, more precise
and consistent throttle operation. Engine Over-Speed
Protection prevents downshifting until an acceptable safe
travel speed has been established.
The 140K2 offers standard Variable Horse Power (VHP)
to provide more power in the higher gears.

3
Hydraulics
Balanced hydraulics deliver consistent, precise and responsive control

Balanced Flow, Independent Oil Supply

Hydraulic flow is proportioned to ensure all implements
operate simultaneously. Independent oil supply prevents
cross-contamination and provides proper oil cooling,
which means less heat build-up and extended component life.

Implement Control Valves

Provide outstanding operator “feel” and predictable system
response for unmatched implement control. To help maintain
exact blade settings, lock valves are built into all control
valves. Line relief valves are also incorporated into selected
control valves to protect the cylinders from over pressurization.

Load-Sensing Hydraulics
A load sensing variable displacement pump and advanced
hydraulic valves provide superior implement control and
better machine performance. Continuously matching
hydraulic flow and pressure to power demands creates
less heat and reduces power consumption.

Consistent and Predictable Movement

The hydraulic system valves are specifically designed for each
hydraulic function on the motor grader. They compensate
for differences in flow requirements, based on cylinder size
and the difference in surface volume between the rod end
(blue) and barrel end (red) of the cylinder. The result is
predictable, consistent hydraulic speeds whether extending
or retracting the cylinder.

4
Structures/Drawbar-Circle-Moldboard

Designed for strength and durability

Frame Structure – Provides Consistency and Strength

Front frame is a continuous top and bottom plate construction. Flanged box section design
removes welds from high stress areas, improving reliability and durability. The rear frame structure
has two box section channels with fully welded differential case for a solid working platform.
An integrated bumper ties the rear frame together into a cohesive unit to handle high stress loads.

Drawbar, Circle and Moldboard

The K Series 2 drawbar is designed for high strength and optimum durability for any application.
The circle stands up to high stress loads. Raised wear surfaces prevent circle teeth wear against the
drawbar. The 64 uniformly spaced circle teeth are flame cut and heat induction hardened to resist wear,
and the circle is secured to the drawbar by four (120K2) or six (140K2) support shoes for maximum support.
The moldboard provides optimal curvature and large throat clearance that helps move all soil types
quickly and efficiently. These features deliver excellent load distribution and minimal material buildup
in the circle area while allowing large blade loads to roll freely.

Blade Lift Accumulators

This optional feature uses accumulators to help absorb impact loads to the moldboard by allowing
vertical blade travel. Blade lift accumulators reduce unnecessary wear and help to avoid unintended
machine movement for increased operator safety.

5
 Work Tools and Attachments
Allows expansion of machine versatility, utilization, and performance

Moldboard Options
Standard moldboard length is 3.7 m (12 ft), with an optional
4.3 m (14 ft) (140K2 only) moldboard available from the
factory. Moldboard extensions are available to increase
moldboard surface area and extend reach capability.

Ground Engaging Tools

A wide variety of cutting edges and end bits are available,
all designed for maximum service life and productivity.

Rear Ripper/Scarifier
1 The optional ripper/scarifier is made to penetrate tough
material fast and rip thoroughly for easier material movement
with the moldboard. The ripper includes three shanks with
the ability to add two more if needed. Nine scarifier shanks
can also be added for additional versatility (140K2 only).

Front Mounted Groups

A front mounted push plate/counterweight or front blade
can be ordered.

Mid-Mount Scarifier
Positioned between the front axle and the circle to break up
tough material that the blade can then move, all in a single
2 pass. The V-type scarifier can accommodate up to 11 teeth.

Snow Removal Work Tools

Includes snow wings, angle blades, and V-plows.
Multiple mounting options are available, increasing
machine versatility. (Availability may differ by region.)

1) 120K2 ripper 2) 140K2 ripper

6
Operator Station
Caterpillar sets the standard for comfort, convenience and visibility

Designed for Productivity

K Series 2 cabs are designed to keep operators comfortable, relaxed and productive. Features like low
effort pedals and controls, adjustable implement controls and adjustable steering wheel angle help make
work easier on the operator. A clear view to the moldboard heel and tandem tires enhance productivity
and safe operation. Rocker switches and transmission shifter are backlit for night time operation.

In-dash Instrument Cluster

The instrument panel, with easy-to read, high-visibility gauges and warning lamps, places vital machine
information and diagnostic capability in easy view of the operator. The dash includes an engine coolant
temperature gauge, an articulation gauge, voltage gauge and fuel level gauge. Service brake air pressure
gauges are also standard. Speedometer and tachometer are optional. All major systems are monitored
by warning lights.

Additional Cab Features

Additional cab features include storage area, an adjustable control console and coat hook.

Optional offerings include power port, air conditioner/heater, suspension seat, defroster fan, sun shade,

backup lights, Product Link™ ready, and AccuGrade™ System ready.

NOTE: Some attachments are not available in all regions.

7
Integrated Technologies

Solutions to make work easier and more efficient

Cat AccuGrade
AccuGrade uses positioning and guidance technologies,
machine sensors, and automatic blade control to help operators
get to grade faster, easier and more efficiently. Digital design
plans, real-time cut/fill data, and in-cab guidance give operators
detailed information to work more confidently and achieve
greater accuracy, in fewer passes, using less material.
Operators can stay on grade and improve productivity and
accuracy by nearly 50 percent over conventional methods.
Grade stakes and checkers are minimized, making the work
site safe, efficient, and cost effective. AccuGrade technologies
include Cross Slope, Sonic, Laser, GPS, and/or Universal
Total Station (UTS).

AccuGrade Attachment Ready Option (ARO)

K Series 2 machines can be equipped with the AccuGrade ARO.

It can be ordered as a factory or dealer installed option.

The attachment option includes built-in mounting points

and internal wiring, making installation of the AccuGrade

grade control system faster and easier.

Cat Product Link*

Product Link helps take the guesswork out of equipment
management with remote monitoring capabilities for your
machine or your entire fleet. Track asset location, hours,
fuel usage, diagnostic codes, idle time and more through
the secure VisionLink® user interface. Knowing where your
equipment is, what it’s doing and how it’s performing enables
you or your Cat dealer to manage your fleet in real-time so
you can maximize efficiency, improve productivity, and lower
operating costs.

*Product Link licensing not available in all areas.

Please consult your Cat dealer for availability.

8
Safety
Designed with safety in mind

ROPS/FOPS Cab Offers Low Sound and Vibration Levels

The operator sound pressure level for the cab offered by Caterpillar, when properly installed, maintained
and tested with the doors closed, meets or exceeds requirements set forth in ISO 6394:2008. The quiet
environment helps improve operator working conditions.

Brake Systems and Machine Protection

Brakes located at each tandem wheel offer the largest total brake surface area in the industry, delivering
dependable stopping power and longer brake life. Standard circle drive slip clutch protects the drawbar,
circle and moldboard from shock loads when the blade encounters an immovable object. Blade lift
accumulators help absorb impact loads to the moldboard by allowing vertical blade travel.

Electrical Disconnect Switch and Engine Shutoff Switch

Disconnect switch provides ground-level lockout of the electrical system to prevent inadvertent machine
starts. Engine shutoff allows anyone nearby to shut the machine down in case of an emergency.

Additional Safety Features

Laminated glass on the front windows and lockable doors to reduce theft and vandalism are available
with the optional cab. Brake lights, conveniently located grab rails, back up lights and alarm also help
ensure a safe work environment.

9
Complete Customer Support

When uptime counts

Renowned Cat Dealer Support

From helping you choose the right machine to financing
and ongoing support, your Cat dealer provides the best
in sales and service.
Manage your costs with preventive maintenance programs
like S•O•SSM fluids analysis, coolant sampling and
guaranteed maintenance contracts.
Stay productive with best-in-class parts availability.
Your Cat dealer can help you boost your profits with
operator training.
And when it’s time for component replacement, your Cat dealer
can help you save even more. Genuine Cat Remanufactured
parts carry the same warranty and reliability as new
products at savings of 40 to 70 percent for power train
and hydraulic components.

Sustainability
Thinking generations ahead
• Meets Bharat Stage III and China Stage II emission
standards.
• Integrated machine systems and technologies improve
productivity for greater accuracy, lower fuel use and
reduced machine wear.
• Replaceable wear parts save maintenance time
and cost, and extend major component life.
• Ecology drains help make draining fluids more
convenient and help prevent spills.
• Major components are built to be rebuilt, eliminating
waste and saving customers money.
• A variety of safety features help safeguard operators
and others on the job site.

10
Serviceability
Convenient service points make routine maintenance quick and easy

Grouped Service Points on the left side to help ensure proper maintenance
Easy access to service areas speeds up maintenance and ensures that routine service is performed
on time. Ecology drains shorten service times and help prevent spills. Radiator cleanout access gives
the operator the ability to clear away debris and other materials that build up around the radiator.

Extended Service Intervals Reduce Downtime, Operating Cost

• 500 hour engine oil changes • 4,000 hour hydraulic oil changes • 12,000 hour engine coolant changes

Diagnostics and Machine Monitoring

The dash cluster panel provides enhanced machine information and diagnostic capability, which allows
faster servicing of the transmission and engine.

O-Ring Face Seals

O-Ring face seals create a reliable connection and are used in all hydraulic circuits to minimize the
possibility of oil leaks.

Separate Wiring Harnesses

Modular harness design provides simple disconnects for major machine repairs or rebuilds which
reduces machine downtime.

Cat Electronic Technician

Cat Electronic Technician is a two-way communication tool that gives service technicians easy access
to stored diagnostic data, reducing machine downtime and lowering operating costs.

11
120K2 Motor Grader Specifications

Engine Power Train Hydraulic System

Engine Model* Cat C7 ACERT Forward/Reverse 8 forward/6 reverse Circuit Type Load Sensing, Closed
Base Power 108 kW 145 hp Gears Center, PPPC
(1st gear) – Net Transmission Direct drive, Pump Type Variable Piston
Gross Power – 116 kW 155 hp Powershift Pump Output 159.1 L/ 42 gal/
ISO 14396 Brakes Standard Pump min min
Power – All Gears Service Air actuated, Optional High 210.5 L/ 55.6 gal/
1-8 Net 108 kW 145 hp multiple oil-disc Output Pump min min
1-8 Net (metric) 147 hp Service, 18 606 cm2 2,884 in2 Maximum System 25 500 kPa 3,699 psi
surface area Pressure
1-8 Gross 118 kW 158 hp
Parking Air actuated, Standby Pressure 3600 kPa 522.1 psi
1-8 Gross (metric) 160 hp
multiple oil-disc Reservoir Tank 24.5 L 6.5 gal
Displacement 7.2 L 442 in3
Secondary Dual Circuit Capacity
Bore 110 mm 4.33 in
• Brakes meet the following standards: • Pump output measured at 2,150 rpm
Stroke 127 mm 5.0 in SAE J/ISO 3450 JAN 98.
Torque Rise 50% Moldboard
Maximum 774 N·m 571 ft-lb Operating Specifications
Torque Net Blade Width 3.7 m 12 ft
Top Speed Moldboard
Speed @ rated power 2,000 rpm
forward 47.5 km/h 29.5 mph height 610 mm 24 in
Number of cylinders 6
reverse 37.5 km/h 23.3 mph thickness 22 mm 0.9 in
Derating altitude 2286 m 7,500 ft
Turning Radius, 7.3 m 23 ft 11 in Arc Radius 413 mm 16.3 in
Fan Speed Maximum 1,575 rpm
outside front tires
High Ambient 50° C 122° F Throat Clearance 58 mm 2.3 in
Steering Range – 47.5 Degrees
Capability Cutting Edge
left/right
* K Series 2 Motor Graders are certified width 152 mm 6 in
Articulation Angle – 20 Degrees
to Bharat Stage III and China Stage II left/right thickness 16 mm 0.6 in
emissions standards. End Bit
Forward
• Net power is tested per ISO 9249,
1st 4.1 km/h 2.5 mph width 152 mm 6 in
SAE J1349, and EEC 80/1269 standards
in effect at the time of manufacture. 2nd 5.5 km/h 3.4 mph thickness 16 mm 0.6 in
• Net power advertised is the power available 3rd 8.0 km/h 5.0 mph Blade Pull
at rated speed of 2,000 rpm, measured at base GVW 8112 kg 17,884 lb
4th 11.1 km/h 6.9 mph
the flywheel when engine is equipped with
5th 17.5 km/h 10.8 mph maximum GVW 10 623 kg 23,420 lb
fan, air cleaner, muffler and alternator.
• Maximum torque measured at 1,000 rpm. 6th 23.7 km/h 14.8 mph Down Pressure
7th 32.7 km/h 20.3 mph base GVW 5594 kg 12,332 lb
8th 47.5 km/h 29.5 mph maximum GVW 9317 kg 20,540 lb
Reverse • Blade Pull calculated at 0.9 traction
1st 3.2 km/h 2.0 mph coefficient, which is equal to ideal no-slip
conditions, and Gross Vehicle Weight (GVW).
2nd 6.0 km/h 3.7 mph
3rd 8.7 km/h 5.4 mph
4th 13.8 km/h 8.6 mph
5th 25.8 km/h 16.0 mph
6th 37.5 km/h 23.3 mph
• Maximum travel speeds calculated at high
idle on standard machine configuration
with 14.00-24 12PR (G-2) tires.

12
 120K2 Motor Grader Specifications

Blade Range Frame Weights

Circle Centershift Circle Gross Vehicle Weight – Base

right 656 mm 25.8 in diameter 1530 mm 60.2 in total 12 133 kg 26,749 lb
left 658 mm 25.8 in blade beam 30 mm 1.2 in front axle 3120 kg 6,878 lb
Moldboard Sideshift thickness rear axle 9013 kg 19,871 lb
right 663 mm 26 in Drawbar Gross Vehicle Weight – Typically Equipped
left 512 mm 20.2 in height 127 mm 5 in total 13 843 kg 30,519 lb
Maximum Blade 90 Degrees width 76.2 mm 3 in front axle 3970 kg 8,751 lb
Position Angle Front axle rear axle 9873 kg 21,768 lb
Blade Tip Range height to center 615 mm 24.2 in Gross Vehicle Weight – Maximum
forward 40 Degrees wheel lean, 18 Degrees total 17 000 kg 37,478 lb
backward 5 Degrees left/right
front axle 5197 kg 11,456 lb
Maximum shoulder reach outside of tires total oscillation 32 Degrees
rear axle 11 803 kg 26,022 lb
per side
right 1928 mm 75.9 in • Base weight calculated on standard machine
Front-top/bottom plate
left 1764 mm 69.4 in configuration with 13.00-24 12PR (G-2) tires,
width 280 mm 11 in full fuel tank, coolant, lubricants and operator.
Maximum lift 410 mm 16.1 in
above ground thickness 22 mm 0.9 in • Typical operating weight calculated on
Maximum depth 775 mm 30.5 in Front-side plates standard machine configuration with Cab
of cut width 236 mm 9.3 in High Profile ROPS, 14.00-24 12PR (G-2)
tires, mid mount scarifier, full fuel tank,
thickness 10 mm 0.4 in coolant, lubricants and operator.
Ripper
Front-linear weights • Maximum Vehicle Weight includes all
Ripping depth – 262 mm 10.3 in minimum 134 kg/m 90 lb/ft compatible attachments with Cab High Profile
maximum maximum 172 kg/m 115 lb/ft ROPS, 14.00-24 12PR (G-2) tires, full fuel
tank, coolant, lubricants and operator.
Ripper shank 5 Front-section modulus
holders, quantity Standards

minimum 1619 cm3 99 in3

Ripper shank holder 533 mm 21 in
maximum 3681 cm3 225 in3
spacing ROPS/FOPS ISO 3471:1994/
ISO 3449:2005
Penetration force 4083 kg 9,001 lb Tandems

Pryout force 2108 kg 4,648 lb Steering ISO 5010:2007

Height 438 mm 17.24 in Brakes ISO 3450:1996
Machine length 1058 mm 41.7 in
increase, beam raised Width 172 mm 6.77 in Sound ISO 6394:2008
Sidewall thickness ISO 6396:2008
Scarifier inner 1 mm 1 in • These standards are met when the machine
outer 16 mm 0.63 in is equipped with a cab.
Mid, V-Type:
• The static operator sound pressure level
Working width 1184 mm 46.6 in Drive chain pitch 44.5 mm 1.75 in
is 79 dB(A) when “ISO 6394:2008” is used
Scarifying depth, 229 mm 9 in Wheel axle spacing 1510 mm 59.45 in to measure the value for an enclosed cab.
maximum Tandem oscillation The measurement was conducted with the
Scarifier shank 11 front up 15 Degrees cab doors and the cab windows closed.
holders quantity The cab was properly installed and
front down 25 Degrees
maintained.
Scarifier shank 116 mm 4.6 in
holder spacing Service Refill
• The mid-mount scarifier is positioned Fuel Capacity 305 L 80.6 gal
under the drawbar between the moldboard
and front axle. Cooling system 40 L 10.6 gal
Engine Oil 18 L 4.8 gal
Transmission/ 48 L 12.7 gal
Differential/
Final Drives
Tandem housing 49 L 12.9 gal
(each)
Front wheel spindle 0.5 L 0.1 gal
bearing housing
Circle drive housing 7L 1.9 gal

13
140K2 Motor Grader Specifications

Engine Power Train Hydraulic System

Engine Model* Cat C7 ACERT Forward/Reverse 8 forward/6 reverse Circuit Type Load Sensing, Closed
Base Power 128 kW 171 hp Gears Center, Proportional
(1st gear) – Net Transmission Direct drive, Priority Pressure
Power shift Compensating System
Gross Power – 153 kW 205 hp
ISO 14396 Brakes Pump Type Variable Piston
VHP Range – Net 128­ 171­ Service Air actuated, multiple Pump Output 159.1 L/ 42 gal/
143 kW 191 hp oil-disc Standard Pump min min
VHP – gears Service, surface 23 948 cm2 3,712 in2 Optional High 210.5 L/ 55.6 gal/
area Output Pump min min
1-2 Net 128 kW 171 hp
Parking Air actuated, multiple Maximum System 25 500 kPa 3,698.5 psi
3 Net 135 kW 181 hp
oil-disc Pressure
4-8 Net 143 kW 191 hp
Secondary Dual circuit Standby Pressure 3600 kPa 522.1 psi
1-2 Gross 140 kW 188 hp
• Brakes meet the following standards: Reservoir Tank 55 L 14.5 gal
3 Gross 147 kW 198 hp Capacity
SAE J/ISO 3450 JAN 98.
4-8 Gross 155 kW 208 hp • Pump output measured @ 2,150 rpm.
Displacement 7.2 L 442 in3 Operating Specifications
Bore 110 mm 4.33 in Moldboard
Top Speed
Stroke 127 mm 5.0 in
forward 47.3 km/h 29.4 mph Blade Width 3.7 m 12 ft
Torque Rise 46%
reverse 37.4 km/h 23.2 mph Moldboard
Maximum 996 N·m 735 lb ft
Turning Radius, 7.5 m 24 ft 9 in height 610 mm 24 in
Torque Net
outside front tires thickness 22 mm 0.9 in
Speed @ rated power 2,000 rpm
Steering Range – 47.5 Degrees Arc Radius 413 mm 16.3 in
Number of cylinders 6
left/right Throat Clearance 120 mm 4.7 in
Derating altitude 3048 m 10,000 ft
Articulation Angle – 20 Degrees Cutting Edge
Fan Speed Maximum 1,925 rpm left/right
width 152 mm 6 in
High Ambient 50° C 122° F Forward
Capability thickness 16 mm 0.6 in
1st 4.1 km/h 2.5 mph
End Bit
* K Series 2 Motor Graders are certified 2nd 5.5 km/h 3.4 mph
to Bharat Stage III and China Stage II width 152 mm 6 in
3rd 8.0 km/h 5.0 mph
emissions standards. thickness 16 mm 0.6 in
• Net power is tested per ISO 9249, 4th 11.0 km/h 6.9 mph
Blade Pull
SAE J1349, and EEC 80/1269 standards 5th 17.4 km/h 10.8 mph
base GVW 9108 kg 20,080 lb
in effect at the time of manufacture. 6th 23.6 km/h 14.7 mph
• Net power advertised is the power available maximum GVW 13 379 kg 29,496 lb
7th 32.5 km/h 20.2 mph
at rated speed of 2,000 rpm, measured at Down Pressure
the flywheel when engine is equipped with 8th 47.3 km/h 29.4 mph
base GVW 7278 kg 16,044 lb
fan, air cleaner, muffler and alternator. Reverse
maximum GVW 13 963 kg 30,784 lb
• Maximum torque measured at 1,000 rpm 1st 3.2 km/h 2.0 mph
in gears 4-8. • Blade Pull calculated at 0.9 traction
2nd 6.0 km/h 3.7 mph coefficient, which is equal to ideal no-slip
3rd 8.7 km/h 5.4 mph conditions, and Gross Vehicle Weight (GVW).
4th 13.7 km/h 8.5 mph
5th 25.7 km/h 16.0 mph
6th 37.4 km/h 23.2 mph
• Maximum travel speeds calculated at high
idle on standard machine configuration
with 17.50-25 12PR (G-2) tires.

14
 140K2 Motor Grader Specifications

Blade Range Frame Weights

Circle Centershift Circle Gross Vehicle Weight – Base

right 728 mm 28.7 in diameter 1530 mm 60.2 in total 14 292 kg 31,508 lb
left 752 mm 29.6 in blade beam 35 mm 1.4 in front axle 4172 kg 9,197 lb
Moldboard Sideshift thickness rear axle 10 120 kg 22,311 lb
right 663 mm 26.1 in Drawbar Gross Vehicle Weight – Typically Equipped
left 512 mm 20.2 in height 127 mm 5 in total 17 510 kg 38,603 lb
Maximum Blade 90 Degrees width 76.2 mm 3 in front axle 5053 kg 11,140 lb
Position Angle Front axle rear axle 12 457 kg 27,463 lb
Blade Tip Range height to center 628 mm 24.7 in Gross Vehicle Weight – Maximum
forward 40 Degrees
wheel lean, 18 Degrees
total 22 870 kg 50,420 lb
backward 5 Degrees
left/right

front axle 8005 kg 17,647 lb

Maximum shoulder reach outside of tires total oscillation 32 Degrees

rear axle 14 866 kg 32,773 lb

right 1978 mm 77.9 in Front-top/bottom plate
• Base weight calculated on standard machine
left 1896 mm 74.6 in width 305 mm 12 in configuration with 14.00-24 12PR (G-2) tires,
Maximum lift 480 mm 18.9 in thickness 25 mm 1 in full fuel tank, coolant, lubricants and operator.
above ground Front-side plates • Typical operating weight calculated on
Maximum depth 735 mm 28.9 in width 242 mm 9.5 in standard machine configuration with Cab
of cut High Profile ROPS, rear ripper, push block,
thickness 12 mm 0.5 in 14.00-24 12PR (G-2) tires, full fuel tank,
Front-linear weights coolant, lubricants and operator.
Ripper
• Maximum Vehicle Weight includes all
minimum 165 kg/m 112 lb/ft
Ripping depth – 462 mm 18.2 in maximum 213 kg/m 144 lb/ft compatible attachments with Cab High Profile
maximum ROPS, 17.50-25 12PR (G-2) tires, full fuel
Front-section modulus tank, coolant, lubricants and operator.
Ripper shank 5
minimum 2083 cm3 127 in3
holders, quantity
maximum 4785 cm3 291 in3 Standards

Ripper shank holder 533 mm 21 in

spacing ROPS/FOPS ISO 3471:1994/
Tandems

Penetration force 8694 kg 19,166 lb ISO 3449:2005

Pryout force 11 673 kg 25,735 lb Height 506 mm 19.9 in Steering ISO 5010:2007
Machine length 970 mm 38.2 in Width 201 mm 7.9 in Brakes ISO 3450:1996
increase, beam raised Sidewall thickness Sound ISO 6394:2008
Scarifier shank 9 inner 16 mm 0.6 in ISO 6396:2008
holder quantity outer 18 mm 0.7 in • These standards are met when the machine
Drive chain pitch 51 mm 2 in is equipped with a cab.
Scarifier • The static operator sound pressure level
Wheel axle spacing 1522 mm 59.9 in
is 79 dB(A) when “ISO 6394:2008” is used
Mid, V-Type Tandem oscillation to measure the value for an enclosed cab.
Working width 1184 mm 46.6 in front up 15 Degrees The measurement was conducted with the
Scarifying depth, 229 mm 9 in front down 25 Degrees cab doors and the cab windows closed.
maximum The cab was properly installed and
Scarifier shank 11 Service Refill maintained.
holders quantity
Fuel Capacity 305 L 80.6 gal
Scarifier shank 116 mm 4.6 in
holder spacing Cooling system 40 L 10.6 gal
Rear Engine Oil 18 L 4.8 gal
Working width 2300 mm 90.6 in Transmission/ 60 L 15.9 gal
Differential/
Scarifying depth, 266 mm 10.5 in
Final Drives
maximum
Tandem housing 64 L 16.9 gal
Scarifier shank 9
(each)
holders quantity
Front wheel spindle 0.5 L 0.1 gal
Scarifier shank 267 mm 10.5 in
bearing housing
holder spacing
Circle drive housing 7L 1.9 gal
• The mid-mount scarifier is positioned
under the drawbar between the moldboard
and front axle.
15
K Series 2 Specifications

Dimensions

All dimensions are approximate.

1 9
10

2
8

11 3 4

12 5

13 6

120K2 140K2

  mm in mm in

1 Height – ROPS Cab 3326 131.0 3354 132.0

Height – Non-ROPS Cab 3321 130.7 3348 131.8
Height – ROPS Canopy 3326 131.0 3354 132.0
2 Ground Clearance – Center Front Axle 602 23.7 626 24.6
3 Length – Between Tandem Axles 1510 59.4 1523 60.0
4 Length – Front Axle to Moldboard 2598 102.3 2598 102.3
5 Length – Front Axle to Mid Tandem 5870 231.1 6086 239.6
6 Length – Front Tire to Rear of Machine 8265 325.4 8504 334.8
7 Length – Counterweight to Ripper 9769 384.6 10 013 394.2
8 Ground Clearance, Trans. Case 341 13.4 362 14.3
9 Height – Top of Cylinders 2885 113.6 3049 120.0
10 Height to Exhaust Stack 2865 112.8 2895 114.0
11 Width – Tire Center Lines 2056 80.9 2065 81.3
12 Width – Outside Rear Tires 2439 96.0 2452 96.6
13 Width – Outside Front Tires 2449 96.4 2481 97.7

16
 K Series 2 Standard Equipment

Standard Equipment

Standard equipment may vary. Consult your Cat dealer for details.

ELECTRICAL
POWER TRAIN OTHER STANDARD EQUIPMENT

Alternator, 115 Ampere

Air cleaner, dry type radial seal with Bumper, rear

Backup alarm, reversing lights

service indicator and automatic CD ROM Parts Book

Batteries, maintenance free 750 CCA

dust ejector Circle drive slip clutch

Electrical system, 24 volt

Air to air after cooler (ATAAC) Cutting edges, 152 mm × 16 mm

Horn, electric
Blower fan (6 in × 5/8 in) curved DH-2 steel

Lights, stop and tail

Brakes, oil disc, four-wheel air actuated Doors, Engine compartment

Motor, starting
Differential with lock/unlock Drawbar, 4 shoe (120K2) or 6 shoe (140K2)

Product Link Ready

Engine, Cat C7 with ACERT Technology, replaceable nylon composite wear strips

Working lights
diesel with automatic engine derate and Endbits, 16 mm (5/8 in) DH-2 steel

idle control. Certified to Bharat Stage III Frame, articulated with safety lock

and China Stage II emissions standards. Fuel tank, 305 L (80.6 gal)

OPERATOR ENVIRONMENT

Fuel water separator Ground level engine shutdown

Accelerator

Muffler, under hood Link bar, 7 position

Control console, adjustable

Parking brake, multi-disc, sealed and 120K2 Moldboard, 3658 mm × 610 mm

Gauge cluster (includes voltmeter,

oil cooled × 22 mm (12 ft × 24 in × 7/8 in) blade with

articulation, engine coolant temperature,

air brake pressure and fuel level)

Prescreener hydraulic sideshift and mechanical tip

Guard rails, operator station

Priming pump, fuel, resiliently mounted 140K2 Moldboard, 3658 mm × 610 mm

Hydraulic controls, load sensing (right/left

Sediment drain, fuel tank × 22 mm (12 ft × 24 in × 7/8 in) blade with

blade lift, circle drive, centershift, sideshift,

Tandem drive hydraulic sideshift and tip

front wheel lean and articulation)

Transmission, 8 speed forward and 6 speed S·O·S ports, engine, hydraulic,

Indicator lights (includes high beam,

reverse, power shift, direct drive with transmission and cooling

LH and RH turn, low engine oil pressure,

electronic shift control and overspeed Toolbox with padlock

throttle lock, check engine, transmission

protection Vandalism protection – including cap

filter bypass and check, centershift pin,

VHP (Variable Horse Power) (140K2 only) locks for hydraulic tank, radiator access

brake air pressure, parking brake engaged,

cover, fuel tank, engine and transmission

auto shift)
oil check/fill and lockable battery boxes.

Key start/stop switch

Meter, hour
ANTIFREEZE

Power steering, hydraulic

Extended Life Coolant to –35° C (–30° F)

Seat, vinyl-covered static

Seat belt

Steering wheel, tilt, adjustable

Storage area, cooler/lunch box

Throttle, electronic control

17
K Series 2 Optional Equipment

Optional Equipment

Optional equipment may vary. Consult your Cat dealer for details.

kg lb kg lb kg lb
GUARDS RIPPER/SCARIFIER HYDRAULICS
Guard, transmission 98 216 (140K2 only) Pump, hydraulic, 2 4
Ripper/Scarifier, 0 0 high capacity
OPERATOR rear mounted* (210 L/min 55.7 gal/min)
ENVIRONMENT Scarifier, mid mounted, 845 1,862 Hydraulic
Air conditioner with 91 201 V-type arrangements with one
heater or more additional
Heater, cab 14 31 LIGHTS (140K2 only) hydraulic valves are
Bar mounted, low, 13 29 available for rear
directional and ripper, mid-mount
CAB/CANOPY scarifier, dozer, snow
Cab, ROPS* 0 0 headlights
plow and snow wing.
Cab, Non-ROPS* –182 –401 Cab and bar mounted, 22 49
high, directional,
Canopy, ROPS* –118 –260 BLADES,
headlights and
Seat, vinyl adjustable 14 31 work lights MOLDBOARDS
Seat, cloth, contour 11 24 Moldboard, Deluxe
Fan, defroster, 2 4 POWER TRAIN (120K2 only)
front window Blade, 3658 mm × 220 485
Autoshift 2 4
Fan, defroster, 2 4 610 mm × 22 mm
rear window (12' × 24" × 7/8") with
OTHER hydraulic side shift and
Sun shade, rear 3 7
ATTACHMENTS tip and 5/8" end bits
Wiper/washer, rear 7 15
Product Link 5 10 cutting edge 203 mm
Wipers, intermittent 1 2
Snow Wing Mounting, 91 201 × 19 mm (8" × 3/4")
front
frame-ready Moldboard
Mirrors, dual inside 1 2
AccuGrade ARO 10 22 (140K2 only)
Mirrors, outside 8 18
Dryer, air 13 29 Blade, 4267 mm × 93 205
mounted
Push plate, – 907 – 2,000 610 mm × 22 mm
Power port, 12V 2 4
counterweight* (14' × 24" × 7/8")
accessory
Accumulator, blade lift 77 170 Blade, front 1180 2,601
Radio ready 5 11
Battery, extreme duty 14 31 Cutting edge, 203 mm 50 110
entertainment
(1400 CCA) × 19 mm (8" × 3/4").
Tachometer/ 1 2
Ether, starting aid 1 2 For use with 14' blade
Speedometer
Heater, engine coolant, 1 2 Endbits, overlay, 11 24
* Weights represent changes to 220V reversible pair for
Typically Equipped machine weights. use with 203 mm (8")
cutting edges

18
Notes

19

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com AEHQ7002 (04-2013)
India
© 2013 Caterpillar Inc.
All rights reserved

Materials and specifications are subject to change without notice. Featured machines in photos may include additional
equipment. See your Cat dealer for available options.

CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well
as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

VisionLink is a trademark of Trimble Navigation Limited, registered in the United States and in other countries.