HL15 Module-1 Radio Optimization Guideline, KPI Overview
HL15 Module-1 Radio Optimization Guideline, KPI Overview
Intra-Frequency Handover
Mobility Inter-Frequency Handover
Inter-RAT Handover (LTE to WCDMA/GSM)
Radio Bearers
Traffic
Downlink/ Uplink Traffic Volume
Accessibility KPI
Unit/Ran
Category Formula Associated Counters Object Note
Name ge
Cell /
RRCS_SR = RRC Setup Success Rate =(L.RRC.ConnReq.Succ /
Accessibility RRC Setup Success Rate Radio Percenta None
(RRCConnectionSuccess/RRC L.RRC.ConnReq.Att) × 100%
KPIs Network ge (%)
ConnectionAttempt) × 100%
RRC Setup Success Rate (Service)
=((L.RRC.ConnReq.Succ.Emc +
L.RRC.ConnReq.Succ.HighPri +
L.RRC.ConnReq.Succ.Mt +
L.RRC.ConnReq.Succ.MoData +
RRCS_SRservice = Cell /
L.RRC.ConnReq.Succ.DelayTol +
Accessibility RRC Setup Success Rate (RRCConnectionSuccessservic Radio Percenta None
L.RRC.ConnReq.Succ.MoVoiceCall) /
KPIs (Service) e/RRCConnectionAttemptservi Network ge (%)
(L.RRC.ConnReq.Att.Emc +
ce) × 100%
L.RRC.ConnReq.Att.HighPri + L.RRC.ConnReq.Att.Mt
+ L.RRC.ConnReq.Att.MoData +
L.RRC.ConnReq.Att.DelayTol +
L.RRC.ConnReq.Att.MoVoiceCall)) × 100%
RRCS_SRsignaling =
RRC Setup Success Rate (Signaling) Cell /
RRC Setup Success Rate (RRCConnectionSuccesssignal
Accessibility =(L.RRC.ConnReq.Succ.MoSig / Radio Percenta None
(signaling) ing/RRCConnectionAttemptsig
KPIs L.RRC.ConnReq.Att.MoSig) × 100% Network ge (%)
naling) × 100%
S1SIGS_SR =
S1SIG Connection Setup Success Rate Cell /
S1SIG Connection Setup (S1SIGConnectionEstablishSu
Accessibility =(L.S1Sig.ConnEst.Succ / L.S1Sig.ConnEst.Att) × Radio Percenta None
Success Rate ccess/S1SIGConnectionEstabli
KPIs 100% Network ge (%)
shAttempt) × 100%
Accessibility KPI
Unit/Ran
Category Formula Associated Counters Object Note
Name ge
VoIPERABS_SR = Cell /
E-RAB Setup Success Rate E-RAB Setup Success Rate (VoIP) =(L.E-
Accessibility (VoIPERABSetupSucces/VoIP Radio Percenta None
(VoIP) RAB.SuccEst.QCI.1 /( L.E-RAB.AttEst.QCI.1 - L.E-
KPIs ERABSetupAttempt) × 100% Network ge (%)
RAB.FailEst.X2AP.VoIP)) × 100%
ERABS_SR = Cell /
Accessibility E-RAB Setup Success Rate (ERABSetupSuccess/ERABSet E-RAB Setup Success Rate =(L.E-RAB.SuccEst /(L.E- Radio Percenta None
KPIs upAttempt) × 100% RAB.AttEst - L.E-RAB.FailEst.X2AP))× 100% Network ge (%)
Cell /
MPD = MPD =(L.E-RAB.SessionTime.HighPrecision / L.E-
Retainability Radio None
Minutes Per Service Drop TimeOfTranmission/ERABAbn RAB.AbnormRel ) × 100/1000/60 min
KPIs Network
ormalRelease
MPD (VoIP) =(L.E- Cell /
MPD (VoIP)=
Retainability RAB.SessionTime.HighPrecision.QCI1 / L.E- Radio None
Minutes Per Drop (VoIP) TimeOfTranmission/ERABAbn min
KPIs RAB.AbnormRel.QCI.1)× 100/1000/60 Network
ormalRelease
Service Drop Rate Cell /
Service_CDR =
Retainability (eMTC)=(L.UECNTX.eMTC.AbnormRel / Radio Percenta None
Service Drop Rate (eMTC) (UECNTXAbnormalRelease/U
KPIs (L.UECNTX.eMTC.NormRel + Network ge (%)
ECNTXRelease) × 100%
L.UECNTX.eMTC.AbnormRel )) × 100%
Cell /
Service_CDR = Service Drop Rate (NSA DC) =L.NsaDc.E-
Retainability Service Drop Rate (NSA Radio
(ERABAbnormalRelease/ERA RAB.AbnormRel/(L.NsaDc.E-
KPIs DC) Network
BRelease) × 100% RAB.AbnormRel+L.NsaDc.E-RAB.NormRel) × 100%
Mobility KPI
Unit/Ran
Category Formula Associated Counters Object Note
Name ge
Intra-Frequency Handover Out Success Rate
IntraFreqHOOut_SR = Cell /
=((L.HHO.IntraeNB.IntraFreq.ExecSuccOut +
Intra-frequency Handover Out (IntraFreqHOOutSuccess/IntraFre Radio Percentag None
Mobility KPIs L.HHO.IntereNB.IntraFreq.ExecSuccOut) /
Success Rate qHOOutAttempt) × 100% Network e (%)
(L.HHO.IntraeNB.IntraFreq.ExecAttOut +
L.HHO.IntereNB.IntraFreq.ExecAttOut)) × 100%
Intra-Frequency Handover Out Success Rate (VoIP)
IntraFreqHOOut_SR(VoIP) = =((L.HHO.IntraeNB.IntraFreq.ExecSuccOut.VoIP + Cell /
Intra-frequency Handover Out (IntraFreqHOOutSuccess_VoIP/Int L.HHO.IntereNB.IntraFreq.ExecSuccOut.VoIP) / Radio Percentag None
Mobility KPIs
Success Rate (VoIP) raFreqHOOutAttempt_VoIP) × (L.HHO.IntraeNB.IntraFreq.ExecAttOut.VoIP + Network e (%)
100% L.HHO.IntereNB.IntraFreq.ExecAttOut.VoIP)) × 100%
CSFB_L2W_BasedHO_SR =
Cell /
CSFB Success Rate Based (CSFB_L2W_BasedHO_Success/ CSFB Success Rate Based Handover(LTE to WCDMA)
Radio Percentag None
Mobility KPIs Handover(LTE to WCDMA) CSFB_L2W_BasedHO_Attempt) × =(L.IRATHO.E2W.CSFB.ExecSuccOut /
Network e (%)
100% L.IRATHO.E2W.CSFB.ExecAttOut) × 100%
CSFB_L2G_BasedHO_SR =
Cell /
CSFB Success Rate Based (CSFB_L2G_BasedHO_Success/ CSFB Success Rate Based Handover(LTE to GSM) =
Radio Percentag None
Mobility KPIs Handover(LTE to GSM) CSFB_L2G_BasedHO_Attempt) × (L.IRATHO.E2G.CSFB.ExecSuccOut/
Network e (%)
100% L.IRATHO.E2G.CSFB.ExecAttOut) × 100%
CSFB_L2T_BasedHO_SR =
CSFB Success Rate Based Cell /
(CSFB_L2T_BasedHO_Success/ CSFB Success Rate Based Handover(LTE to TD-SCDMA) =
Handover(LTE to TD-SCDMA Radio Percentag None
Mobility KPIs CSFB_L2T_BasedHO_Attempt) × (L.IRATHO.E2T.CSFB.ExecSuccOut /
) Network e (%)
100% L.IRATHO.E2T.CSFB.ExecAttOut) × 100%
Objec Unit/R
Category Formula Associated Counters Note
Name t ange
RAN_Avail_Rate = Radio Network Availability Rate
(CellAvailTime/(TheTot =(L.Cell.Avail.Dur / (Number of cells × Radio
Radio Network Perce
Availability alNumberOfCellsInClu {SP} × 60)) ×100% Netwo None
Availability Rate ntage
KPIs ster × {SP} × 60)) × "SP" indicates the reporting period for rk
(%)
100% counters in minutes.
Traffic KPI-Radio Bearers
Category Formula Associated Counters Object Unit/Range Note
Name
RadioBearers
RadioBearers_QCI_1
RadioBearers_QCI_2
RadioBearers_QCI_3
RadioBearers_QCI_4 Radio Bearers = L.Traffic.DRB
Radio Bearers Cell / Radio Network N/A None
Traffic KPIs RadioBearers_QCI_5 RadioBearers of QCIn = L.Traffic.DRB.QCI.n
RadioBearers_QCI_6 n = 1~9
RadioBearers_QCI_7
RadioBearers_QCI_8
RadioBearers_QCI_9
DLTrafficVolume
DLTrafficVolume_QCI_1
DLTrafficVolume_QCI_2
DLTrafficVolume_QCI_3
Downlink Traffic Volume = L.Thrp.bits.DL
DLTrafficVolume_QCI_4
Downlink Traffic Volume Downlink Traffic Volume of QCIn = Cell / Radio Network bit None
Traffic KPIs DLTrafficVolume_QCI_5
L.Thrp.bits.DL.QCI.n
DLTrafficVolume_QCI_6
n = 1~9
DLTrafficVolume_QCI_7
DLTrafficVolume_QCI_8
DLTrafficVolume_QCI_9
Traffic KPI-Radio Bearers
Category Formula Associated Counters Object Unit/Range Note
Name
ULTraffic Volume
ULTraffic Volume_QCI_1
ULTraffic Volume_QCI_2
ULTraffic Volume_QCI_3
Uplink Traffic Volume = L.Thrp.bits.UL
ULTraffic Volume_QCI_4
Uplink Traffic Volume Uplink Traffic Volume of QCIn = Cell / Radio Network bit None
Traffic KPIs ULTraffic Volume_QCI_5
L.Thrp.bits.UL.QCI.n
ULTraffic Volume_QCI_6
n = 1~9
ULTraffic Volume_QCI_7
ULTraffic Volume_QCI_8
ULTraffic Volume_QCI_9
Description
Counters used to monitor the E-RAB setup success rates of voice services.
Formula:
Description:
Counters used to monitor the call drop rates of voice services
Associated Counters:
Associated Counters:
1526745995 L.Traffic.UL.FarUE.PktLoss.Loss.QCI.1 Number of uplink PDCP SDUs discarded for QCI 1 services carried on DRBs of cell-edge UEs in a cell
1526745997 L.Traffic.UL.FarUE.PktLoss.Tot.QCI.1 Number of expected uplink PDCP SDUs for QCI 1 services carried on DRBs of cell-edge UEs in a cell
L.Traffic.UL.FarUE.PktLoss.Loss.QCI.1.I
1526745996 Number of uplink PDCP SDUs discarded for QCI 1 services carried on DRBs of cell-edge UEs in a cell
ndex0
L.Traffic.UL.FarUE.PktLoss.Tot.QCI.1.In
1526745998 Number of expected uplink PDCP SDUs for QCI 1 services carried on DRBs of cell-edge UEs in a cell
dex0
VoLTE: Voice Quality
Formula:
1526736674 L.Voice.VQI.AMRWB.UL.Bad.Times.PLMN Number of times uplink voice quality of AMR-WB services is Bad for a specific operator in a cell
1526736679 L.Voice.VQI.AMRWB.DL.Bad.Times.PLMN Number of times downlink voice quality of AMR-WB services is Bad for a specific operator in a cell
Counters used to monitor the average number of PRBs occupied by voice services
Counters used to monitor the number of PDCCH CCEs used by voice services
• Ethernet Port Measurement: The ETHPORT function subset measures the traffic at the data link layer on an Ethernet port, helping users to plan network.
• E1/T1 Port Measurement: The E1T1 function subset helps analyze the transmission quality of the system and ensure the stable and reliable running of the
system.
• PPP Link Measurement (DataLink.PPP): The DataLink.PPP function subset measures the number of packets transmitted on the PPP link of the base station
and evaluates the information about the rates, for example, the number of received packets, the number of transmitted packets, and the rate. It
represents the traffic volume and quality of services carried by the PPP link
• IP Measurement (Network.IP): The Network.IP function subset measures the IP packet traffic, such as the number of successfully transmitted or received
IP packets or the number of bytes in the transmitted or received IP packets.
• IPPath Measurement (Transport.IPPath): The IP Path function subset provides the measurements on an IP path in the base station. It measures the traffic
volumes of services carried by an IP path and the service quality at a smaller granularity, and supports QoS management based on the traffic volumes.
• Resource Group Performance: The object type Resource Group Measurement contains the function subset related to the resource group. It represents
the traffic volume and service processing capability of the resource group on the transmission board in the base station
• IPPM Measurement (Transport.IPPM): The IP PM checks the packet loss, delay, and jitter condition of a link by the local end transmitting forward
monitoring (FM) frames and the peer end responding with backward reporting (BR) frames. The number of FM frames is used to represent the number of
frames transmitted by the local end, whereas that of BR frames is used to represent the number of frames received by the peer end. The local end
calculates the delay, jitter, and packet loss rate along the local-to-peer direction based on the received BR frames
Related Counter Description (Contd.)
• IPv6 Measurement (Network.IPv6): The Network.IPv6 function subset measures the traffic volumes of IPv6 packets, such as the number of successfully
transmitted or received IPv6 packets or the number of bytes in the transmitted or received IPv6 packets. It represents the throughput of IPv6 packets on
the transmission board in the base station
• GTP-U Measurement (Transport.GTPU): The Transport.Gtpu function subset measures the number of packets or the number of bytes in the packets
received or transmitted on the GTP-U link. It represents the data volume on the user plane of the base station. The GTP-U layer uses UDP packets for
transmission.
Transport Related KPI Counter
Ethernet Port Measurement
1542455298 VS.FEGE.TxPackets Number of packets successfully transmitted on the Ethernet port packet
1542455299 VS.FEGE.RxBytes Number of bytes in the packets successfully received on the Ethernet port byte
1542455300 VS.FEGE.RxPackets Number of packets successfully received on the Ethernet port packet
1542455301 VS.FEGE.RxErrPackets Number of error packets received on the Ethernet port packet
1542455365 VS.RscGroup.TxBytes Number of bytes in the packets successfully transmitted by the resource group byte
1542455367 VS.RscGroup.TxPkts Number of packets successfully transmitted by the resource group packet
Number of bytes in the packets discarded by the resource group due to transmission
1542455369 VS.RscGroup.TxDropBytes byte
failures
1542455371 VS.RscGroup.TxDropPkts Number of packets discarded by the resource group due to transmission failures packet
1542455375 VS.RscGroup.TxMaxSpeed Maximum transmit rate of the resource group bit/s
1542455376 VS.RscGroup.TxMinSpeed Minimum transmit rate of the resource group bit/s
1542455377 VS.RscGroup.TxMeanSpeed Average transmit rate of the resource group bit/s
1542455378 VS.RscGroup.TxFlowOverloadTime Congestion duration of transmit data in the resource group s
Transport Related KPI Counter (Contd.)
Allocated Band Measurement
1542460391 VS.RscGroup.AllocatedBW.TxAvgBW Average transmit bandwidth that has been allocated to a resource group kbit/s
1542460392 VS.RscGroup.AllocatedBW.TxMaxUsage Maximum allocation rate of the transmit bandwidth to a resource group %
1542460393 VS.RscGroup.AllocatedBW.TxAvgUsage Average allocation rate of the transmit bandwidth to a resource group %
1542460394 VS.RscGroup.AllocatedBW.RxMaxBW Maximum receive bandwidth that has been allocated to a resource group kbit/s
1542460395 VS.RscGroup.AllocatedBW.RxAvgBW Average receive bandwidth that has been allocated to a resource group kbit/s
1542460396 VS.RscGroup.AllocatedBW.RxMaxUsage Maximum allocation rate of the receive bandwidth to a resource group %
1542460397 VS.RscGroup.AllocatedBW.RxAvgUsage Average allocation rate of the receive bandwidth to a resource group %
Transport Related KPI Counter (Contd.)
TWAMP Transport Link Measurement