EPA Tier 2 Exhaust Emission Compliance Statement 1400DQGAN: 50 HZ Diesel Generator Set

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

EPA Tier 2 exhaust emission

compliance statement
1400DQGAN
50 Hz Diesel generator set

Compliance Information:
The engine used in this generator set complies with the Tier 2 emissions limits of U.S EPA New source performance
standards for stationary emergency engines under the provisions of 40 CFR 60 Subpart IIII when tested per
ISO 8178 D2.
Engine manufacturer: Cummins Inc
EPA Certificate number: CCEXL050.AAD-011
Effective date: 05/27/2011
Date issued: 05/27/2011
EPA Diesel engine family: CCEXL050.AAD
CARB Executive order:

Engine information:
Model: Cummins Inc QSK50-G4 NR2 Bore: 6.25 in. (159 mm)
º
Type: 4 Cycle, 60 V, 16 cylinder diesel Stroke: 6.25 in. (159 mm)
Aspiration: Turbocharged and low Displacement: 3067 cu. in. (50.2 liters)
Temperature after-cooled
(2 pump/2 loop)
Compression ratio: 15.0:1
Emission control device: Turbocharged with low
Temperature after-cooled

Performance data Standby Prime


BHP @ 1500 RPM (50 Hz) 1640 1500
Fuel consumption (gal/Hr) 82 76
Exhaust gas flow (CFM) 9058 8284
Exhaust gas temperature (°F) 792 723

U.S. Environmental Protection Agency (EPA) NSPS Stationary Emergency Tier 2 limits

(All values are grams per HP-hour)


Component
NOx + HC (Oxides of nitrogen as NO2 + 4.77
non methane hydrocarbons)
CO (Carbon monoxide) 2.61
PM (Particulate matter) 0.15

Engine operation with excessive air intake or exhaust restriction beyond published maximum limits, or with improper maintenance, may result in
elevated emission levels.

Cummins Inc. Data and specification subject to change without notice EPA-12066
(07/17)

You might also like