Fiber Glass Reinforcement MULTIAXIAL FIBER GLASS

Reinforcing material, is Fiber Glass type with a little use binder

(<1% binder) or almost no use of binders, resin has a good absorption,
Fiberglass Reinforced Plasic Products high mechanical strength and eficient resin.
Multiaxial is a continuous roving are stitched or Combination Roving’s
with Mat stitched together.
CHOPPED STRAND MAT (CSM)

Reinforcing material made of strands iber glass is cut 1. Biax 600 Combi (+45o/-45o, Width 63.5 & 80 cm)
about 1 inch and tied with polyester powder or emulsion 2. Biax 1200 Combi (+45o/-45o, Width 125 cm)
binder. 3. UD 650 Combi (0o, Width 63)
4. UD 1150 Combi (0o, Width 60, 81, 83 cm)
Characteristics : 5. UD 1280 Combi (0o, Width 142 cm)
Consistent quality, thickness and rigidity 6. UD 1322 H (0o, Width 60 cm)
Easily wetted resin & easily remove air bubbles 7. Triax 900 (+45o/-45o/0o, Width 30, 35, 40, 45 cm)
Good mechanical properties 8. Triax 1800 (+45o/-45o/0o, Width 103.5 cm)
9. Biax 800 (+45o/-45o,Width 127 cm)
Type of CSM : Packaging of CSM : 10. Biax Combi 900 (0o/90o/M300, Width 127 cm)
EMC 300 (Width 1.04 m) Net Weight 30 Kgs/Carton 11. Biax Combi 1250 (0o/90o/M450, Width 127 cm)
EMC 450 (Width 1.04 m)
Packaging : Net Weight 50 Kgs/Carton
TISSUE MAT/SURFACING VEIL WOVEN ROVING (WR)

C-Glass type for manufacture of GRP pipes, storage tank, Reinforcing material is commonly called the statute iber
GRP lining or in hand lay-up for improving surface of glass Roving Cloth wovened from roving continuous. Used
product or laminate. widely in composite industries, especially in the ield of marine.
CURING SYSTEM

Fiberglass Reinforced Plasic Products

CATALYSTS

Drying material used to start the polymerization process of the polyester or vinyl
ester resin from AKPA CHEMICALS (Turkey)
Akperox A2 : General purpose MEKP for curing unsaturated polyester (UP)
Packaging of resins & vinyl ester resins at room temperature.
Tissue Mat/Surfacing Veil :
Type of Woven Roving : Packaging : Generally used together with metal salts as accelerators.
30 Gr/M2, Width 1 M, Akperox A60 : General purpose MEKP for curing unsaturated polyester (UP)
EWR 600 (Width 1 m) Net Weight 40 & 50 Kgs/
300 M/Roll resins & vinyl ester resins at room and high temperatures.
EWR 800 (Width 1.24 m) Carton
Akperox A60G : Special MEKP for curing Gelcoat Resins at room tempera
SPRAY UP ROVING 2400 TEX ture. Low water content and bring high gloss surface area.
Akperox A6R : Phthalate Free type MEKP. It’s used for curing of UP resins at
room and high temperature.
E-Glass multi-end continuous roving, designed for use in Recommended to be used during production of composite
spray up or centrifugal casting process. Compatible with materials which directly get in contact with human body
such as button, water tank etc in point of Phthalate Free
polyester & vinyl ester resin.
specialty.
Packaging : 19 Kgs/Roll Akperox ER60 FW : MEKP for curing UP resins at room and high temperatures.
Particularly suitable for pipe production and continuous
manufacturing applications such as continuous lamination,
RTM, ilament winding & centrifugal casting.

Packaging : 4 x 5 Kgs in a Carton Box

P. 03 PT. SOLCHEM P. 04 PT. SOLCHEM