HEDS 5700 F12 Avago

Distributed by:
www.Jameco.com ✦ 1-800-831-4242
The content and copyrights of the attached
material are the property of its owner.
Jameco Part Number 1552317

HEDS-5700 Series
Panel Mount Optical Encoders
Data Sheet
Description Features
The HEDS-5700 series is a family of low cost, high • Two channel quadrature output with optional index
performance, optical incremental encoders with pulse
mounted shafts and bushings. The HEDS-5700 is • Available with or without static drag for manual or
available with tactile feedback for hand operated mechanized operation
panel mount applications, or with a free spinning
• High resolution: up to 512 CPR
shaft for applications requiring a pre-assembled
encoder for position sensing. • Long rotational life: >1 million revolutions
• –20 to 85°C operating temperature range
The encoder contains a collimated LED light source • TTL quadrature output
and special detector circuit which allows for high
• Single 5 V supply
resolution, excellent encoding performance, long
rotational life, and increased reliability. The unit • Available with color coded leads
outputs two digital waveforms which are 90 degrees
out of phase to provide position and direction
information. The HEDS-5740 Series provides a third
Index Channel.
Package Dimensions
THREAD 3/8-32
NUT 3/8-32 x 7/16"
OPTIONAL WIRING
COLOR CODE TABLE
COLOR OUTPUT
WHITE A
BROWN B
RED VCC
BLACK GND
BLUE I
(THREE
CHANNEL)
*
*Note: For the HEDS-5700, Pin #2 is a No Connect.

For the HEDS-5740, Pin #2 is Channel I, the index output.
The HEDS-5700 is quickly and information from a manually tables, and assembly line
easily mounted to a front panel operated knob. Typical front equipment.
using the threaded bushing, or it panel applications include
can be directly coupled to a instruments, CAD/CAM systems, Note: Avago Technologies
motor shaft (or gear train) for and audio/video control boards. encoders are not recommended
position sensing applications. for use in safety critical
The HEDS-5700 without static applications. Eg. ABS braking
Applications drag (free spinning) is best systems, power steering, life
The HEDS-5700 with the static suited for low speed, support systems and critical
drag option is best suited for mechanized operations. Typical care medical equipment. Please
applications requiring digital applications are copiers, X-Y contact sales representative if
more clarification is needed.
Absolute Maximum Ratings

Parameter Symbol Min. Max. Units Notes
Storage Temperature Ts -40 +85 °C
Operating Temperature Ta -20 +85 °C
Vibration 20 g 20 Hz - 2 kHz
Supply Voltage VCC -0.5 7 V
Output Voltage VO -0.5 VCC V
Output Current per Channel IO -1 5 mA
Shaft Load – Axial 1 lb
– Radial 1
Recommended Operating Conditions

Parameter Symbol Min. Max. Units Notes
Temperature T -20 +85 °C Noncondensing Atmosphere
Supply Voltage VCC 4.5 5.5 V Ripple <100 mVp-p
Rotational Speed – Drag 300 RPM
– Free Spinning 2000
Electrical Characteristics Over Recommended Operating Range, Typical at 25°C

Parameter Symbol Min. Typ. Max. Units Notes
Supply Current ICC 17 40 mA Two Channel
57 85 Three Channel
High Level Output Voltage VOH 2.4 V IOH = -40 µA Max.
Low Level Output Voltage VOL 0.4 V IOL = 3.2 mA
Note: If more source current is required, use a 3.2 K pullup resistor on each output.
2
Mechanical Characteristics
Parameter Min. Typ. Max. Units Notes
Starting Torque – Static Drag 0.47 oz in
– Free Spinning 0.14
Dynamic Drag – Static Drag 1.1 oz in 100 RPM
– Free Spinning 0.70 2000 RPM
Rotational Life – Static Drag 1 x 106 Revolutions 1 lb Load
– Free Spinning 12 x 106 Revolutions 4 oz Radial Load
Mounting Torque of Nut 13 lb in
Output Waveforms
360 ± 5.5
CH A
180 ± 45
S1 S2 S3 S4 90 ± 45 TYPICAL
CH B
90 ± 45
CH I
NOTE:
ALL VALUES ARE IN ELECTRICAL DEGREES, WHERE 360° e = 1 CYCLE OF RESOLUTION.
ERRORS ARE WORST CASE OVER ONE REVOLUTION.
CH B LEADS CH A FOR COUNTERCLOCKWISE ROTATION.
CH A LEADS CH B FOR CLOCKWISE ROTATION.
Ordering Information
HEDS-57
Outputs Resolutions Drag Option Shaft Configuration

0 - 2 Channel (Cycles Per Revolution) 0 - Free Spinning 0 - 1/4" dia. with no flat
4 - 3 Channel HEDS-570X 2 Channel 1 - Static Drag 1 - 6 mm dia. with no flat
K - 96 CPR G - 360 CPR 2 - 1/4" dia. with flat
Mechanical C - 100 CPR A - 500 CPR
Configuration F - 256 CPR I - 512 CPR
0 - Pins HEDS-574X Three Channel*
1 - 6" Coded Leads A - 500 CPR
*Please contact factory for other resolutions.
3
00 01 02 10 11 12
HEDS-5700# A * * *
C * * * *
F * * *
G *
I * * * * *
K * *
HEDS-5701# A * * *
C *
F * * * *
G *
H * *
I *
HEDS-5740# A *
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries.
Data subject to change. Copyright © 2006 Avago Technologies Pte. All rights reserved. Obsoletes 5988-2565EN
5988-5856EN April 10, 2006

HEDS 5700 F12 Avago

Uploaded by

Copyright:

Available Formats

HEDS 5700 F12 Avago

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

HEDS 5700 F12 Avago

Uploaded by

Copyright:

Available Formats

Distributed by:

Jameco Part Number 1552317

*Note: For the HEDS-5700, Pin #2 is a No Connect.

Absolute Maximum Ratings

Recommended Operating Conditions

Electrical Characteristics Over Recommended Operating Range, Typical at 25°C

Outputs Resolutions Drag Option Shaft Configuration

*Please contact factory for other resolutions.

You might also like