0% found this document useful (0 votes)
36 views1 page

BCD Counter

The document summarizes a project to design a 2-digit counter using a BCD counter integrated circuit and 7-segment displays. Key details: - A BCD counter IC (74LS90) and 7447 driver will be used to design a 2-digit counter and display the results on 7-segment displays. - Proteus software will be used for the design and simulation. - Components include the 74LS90 and 7447 ICs, 7-segment displays, anodes, and a power source. - The 74LS90 truth table will be used to specify set/reset values based on connecting inputs to ground or power. - Clock A and B will be

Uploaded by

Hasnat Akbar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
36 views1 page

BCD Counter

The document summarizes a project to design a 2-digit counter using a BCD counter integrated circuit and 7-segment displays. Key details: - A BCD counter IC (74LS90) and 7447 driver will be used to design a 2-digit counter and display the results on 7-segment displays. - Proteus software will be used for the design and simulation. - Components include the 74LS90 and 7447 ICs, 7-segment displays, anodes, and a power source. - The 74LS90 truth table will be used to specify set/reset values based on connecting inputs to ground or power. - Clock A and B will be

Uploaded by

Hasnat Akbar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Project: Design 2-digit counter using BCD counter IC and display the result in 7

segment display.
Work function: 2-digit counter is designed using BCD counter IC and result display in 7
segments.
Resource: Proteus software.
Component: CMOS IC 74LS90, 7447 driver, 7 segment display (display driver), anode, power.
Design: First to identify the value of counter we will use the truth table or functional table of

U1 Anode
U2
Pulse
14 CKA 12 13
00 7 A QA
1 CKB 9 1 B 12
01 QB
8 2 11
02 C QC 7 segment
11 6
03 D 10 display
4 QD
R0(1) 5 BI/RBO 9
2 QE
RBI 15
2 R0(2) 3 QF
LT
6 R9(1) 14
7 QG
R9(2)
Anode
74LS90 7447

LS90. Let to check the four value is it high low or don’t care, which will specify the value of
set and reset. As we connect all to ground so it will be low. For 7447 we connect to power
so it will identify the value. Clock A and B are made for counting. It will be separated and
identify the value. Clock A is the master clock and we have feedback from B to A. Input pulse
are applied at clock A. 5 V pulse is used as on like in digital system it will be 1 or 0. The
connection size will be same so as to all have same resistance as in real system. After this we
will simulate and it start counting from 0-9 and then rest to 0.

You might also like