Scribd
Upload
110 views

Memory Hierarchy in Computer Architecture

The document discusses the memory hierarchy in computer architecture. It has different levels of memory from fastest to slowest - registers, cache, main memory, magnetic disks, and magnetic tapes. Each level has a different tradeoff between access time, storage capacity, and cost. The memory hierarchy is designed to improve performance by storing frequently used data in faster memory close to the CPU.

Uploaded by

drer
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
110 views

Memory Hierarchy in Computer Architecture

The document discusses the memory hierarchy in computer architecture. It has different levels of memory from fastest to slowest - registers, cache, main memory, magnetic disks, and magnetic tapes. Each level has a different tradeoff between access time, storage capacity, and cost. The memory hierarchy is designed to improve performance by storing frequently used data in faster memory close to the CPU.

Uploaded by

drer
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Memory Hierarchy in Computer Architecture

In the design of the computer system, a processor, as well as a large amount of


memory devices, has been used. However, the main problem is, these parts
are expensive. So the memory organization of the system can be done by
memory hierarchy. It has several levels of memory with different performance
rates. But all these can supply an exact purpose, such that the access time can
be reduced. The memory hierarchy was developed depending upon the
behavior of the program. Here we discusses an overview of the memory
hierarchy in computer architecture.

What is Memory Hierarchy?


The memory in a computer can be divided into five hierarchies based on the
speed as well as use. The processor can move from one level to another based
on its requirements. The five hierarchies in the memory are registers, cache,
main memory, magnetic discs, and magnetic tapes. The first three hierarchies
are volatile memories which mean when there is no power, and then
automatically they lose their stored data. Whereas the last two hierarchies are
not volatile which means they store the data permanently.

A memory element is the set of storage devices which stores the binary data in
the type of bits. In general, the storage of memory can be classified into two
categories such as volatile as well as non- volatile.

Memory Hierarchy in Computer Architecture


The memory hierarchy design in a computer system mainly includes different
storage devices. Most of the computers were inbuilt with extra storage to run
more powerfully beyond the main memory capacity. The following memory
hierarchy diagram is a hierarchical pyramid for computer memory. The
designing of the memory hierarchy is divided into two types such as primary
(Internal) memory and secondary (External) memory.
Primary Memory

The primary memory is also known as internal memory, and this is accessible
by the processor straightly. This memory includes main, cache, as well as CPU
registers.

Secondary Memory

The secondary memory is also known as external memory, and this is


accessible by the processor through an input/output module. This memory
includes an optical disk, magnetic disk, and magnetic tape.

Characteristics of Memory Hierarchy


The memory hierarchy characteristics mainly include the following.
Performance

Previously, the designing of a computer system was done without memory


hierarchy, and the speed gap among the main memory as well as the CPU
registers enhances because of the huge disparity in access time, which will
cause the lower performance of the system. So, the enhancement was
mandatory. The enhancement of this was designed in the memory hierarchy
model due to the system’s performance increase.

Ability

The ability of the memory hierarchy is the total amount of data the memory
can store. Because whenever we shift from top to bottom inside the memory
hierarchy, then the capacity will increase.

Access Time

The access time in the memory hierarchy is the interval of the time among the
data availability as well as request to read or write. Because whenever we shift
from top to bottom inside the memory hierarchy, then the access time will
increase.

Cost per bit

When we shift from bottom to top inside the memory hierarchy, then the cost
for each bit will increase which means an internal Memory is expensive
compared with external memory.

Memory Hierarchy Design


The memory hierarchy in computers mainly includes the following.

Registers

Usually, the register is a static RAM or SRAM in the processor of the computer
which is used for holding the data word which is typically 64 or 128 bits. The
program counter register is the most important as well as found in all the
processors. Most of the processors use a status word register as well as an
accumulator. A status word register is used for decision making, and the
accumulator is used to store the data like mathematical operation. Usually,
computers like complex instruction set computers have so many registers for
accepting main memory, and RISC- reduced instruction set computers have
more registers.

Cache Memory

Cache memory can also be found in the processor, however rarely it may be
another IC (integrated circuit) which is separated into levels. The cache holds
the chunk of data which are frequently used from main memory. When the
processor has a single core then it will have two (or) more cache levels rarely.
Present multi-core processors will be having three, 2-levels for each one core,
and one level is shared.

Main Memory

The main memory in the computer is nothing but, the memory unit in the CPU
that communicates directly. It is the main storage unit of the computer. This
memory is fast as well as large memory used for storing the data throughout
the operations of the computer. This memory is made up of RAM as well as
ROM.

Magnetic Disks

The magnetic disks in the computer are circular plates fabricated of plastic
otherwise metal by magnetized material. Frequently, two faces of the disk are
utilized as well as many disks may be stacked on one spindle by read or write
heads obtainable on every plane. All the disks in computer turn jointly at high
speed. The tracks in the computer are nothing but bits which are stored within
the magnetized plane in spots next to concentric circles. These are usually
separated into sections which are named as sectors.

Magnetic Tape

This tape is a normal magnetic recording which is designed with a slender


magnetizable covering on an extended, plastic film of the thin strip. This is
mainly used to back up huge data. Whenever the computer requires to access
a strip, first it will mount to access the data. Once the data is allowed, then it
will be unmounted. The access time of memory will be slower within magnetic
strip as well as it will take a few minutes for accessing a strip.
Advantages of Memory Hierarchy
The need for a memory hierarchy includes the following.

Memory distributing is simple and economical

Removes external destruction

Data can be spread all over

Permits demand paging & pre-paging

Swapping will be more proficient

Thus, this is all about memory hierarchy. From the above information, finally,
we can conclude that it is mainly used to decrease the bit cost, access
frequency, and to increase the capacity, access time. So it is up to the designer
how much they need these characteristics for satisfying the necessities of their
consumers. Here is a question for you, memory hierarchy in OS?

You might also like