ESTOP TDS - Estoflex PU 980 (AR) R1

Estoflex PU 980 (AR)
Two Component Polyurethane for

Waterproofing
Physical Properties
Description
Estoflex PU 980(AR) is a two component modified Form Two part Viscous liquid
polyurethane (poly-isocyanate modified-chain) as Part A & Part B
excellent Waterproofing.Good chemical and Color Green, Grey
abrasion resistant. Density, g/mL 1.40 ± 0.1 (mixed)
Viscosity, cPs 2500 ± 500 (mixed)
Uses Mixing Ratio 3:1
Estoflex PU 980(AR) area of application includes: Pot Life at 25°C Within 30 minutes
• Building or Apartment with medium duty exposed Drying Time at 25°C Within 24 hours
roof. Elongation at break >450
• Carpark. KS F 3211 : 2015
• Planter boxes. %
• Structure that require waterproof and elastic Tensile Strength 3.2
protective coating. KS F 3211 : 2015
• Heavy-vibrated area (mechanical or mechanical N/mm2
room) Tear Strength, 19.9
• Sport facilities KS F 3211 : 2015
• Suitable for flat or sloping roof and podium deck. N/mm
Hardness (Shore A) 60 ± 5 (waterproofing)
Advantages
Application Instructions
• Easy to apply using brush or roller or squeegee.
• Excellent bonding properties to concrete and
Surface Preparation
mortar surface.
Long term durability of any floor/wall waterproofing
• Excellent Water-proof property.
is determined by adhesive bond achieved between
• Good chemical and mechanical abrasion
waterproofing material and substrate. Correct and
property.
proper substrate preparation prior to body coat
• Unique elastic property of Urethane gives a great
application is the most important step.
crack- bridging property.
• Seamless and flat application outcome.
New Concrete
This concrete must be aged for 28 days and
substrate moisture content must be less than 5%.
Substrate should be sound and free from
contamination such as oil and grease, mortar and
paint splashes or curing compound residues.
Excessive laitance can be removed by the use of
mechanical methods.
Denka group www.hissan.co.id

Packing & Size
Old Concrete
Substrate moisture content must be less than Estoflex PU 980 (AR) 20 kg/sets consist of
5%,should not contain water repellent agent, pull off :
strength should exceed 1.5Mpa. A sound clean (15 kg/pail of Part A)
substrate is essential to achieve maximum (5 kg/pail of Part B)
adhesion. As for new concrete surface, removal of
laitance by use of mechanical methods is preferable. Coverage
Oil and grease penetration should be
Estoflex PU 980 (AR) 1.10 – 1.50 kg/m per mm
2
thickness
removed by the use of a proprietary chemical
consumption
degreaser or by hot compressed air treatment. Any
damaged areas or surface irregularities should be
repaired using one of the Epoxy Putty
Technical Support
Excessive dust, debris, and others contaminant
Estop offers a comprehensive range of high
material sh ould be removed using high pressure
performance, high quality of repair product for both
blower or industrial v acuum cleaner.
new and existing concrete surfaces. In addition, the
company offers a technical support package to
Priming
specifies, end-users and contractors, as well as on
Primer must be applied according to the Technical
site technical assistance.
Data (see Estoflex PU 980 Primer Technical Data).
Estoflex PU 980(AR) should be apply when primer
Storage
achieved the tacky- free state (60 minutes at 25 °C).
Store in the dry conditions between 5 – 30 °C.

Placing
Put away from sources of heat and naked frames
 Mix thoroughly Estoflex PU 980(AR) Part A
in the original, unopened packs.
and Part B using medium speed (300 – 500
If stored at high temperatures the shelf life may be
RPM) mixer with spir al-shaped steel stirrer for
reduced.
3 minutes to achieve consist ent quality and
Estoflex PU 980(AR) should be protected from frost
color.
 Apply thoroughly onto primed surface using
Shelf Life
brush, roll er or squeegee application depends
8 months in an unopened and undamaged packaging.
on application con dition.
Cleaning
Tools and equipment just can be clean with acetone
or suitable thinner immediately after use. Cured
product only can be removed using mechanical action
Precaution
Application condition:
1. Relative Humidity (RH) less than 85%.
2. Surface moisture less than 5%.
3. Ambient Temperature 5 – 35 °C.
It must be noted that Estoflex PU 980(AR) is parts of
Polyurethane Waterproofing Systems Application, it
may need other products to achieve the full
Polyurethane Waterproofing Systems.
Safety Measures
Impervious gloves and barrier cream should be used
when handling these products.
Eye protection should be worn. In case of contact with
eyes, wash thoroughly with plenty of water and seek
medical advice if symptoms persist.
If contact with skin occurs, it must be removed before
curing takes place. Wash off with an industrial skin
clearer followed by plenty of soap and water. Do not
use solvent.
Ensure adequate ventilation when using these
products.
Disposal
Spillage of products should be absorbed on to earth,
sand or other inert material and transferred to a
suitable vessel. Disposal of such spillages or empty
packaging should be in accordance with local waste
disposal regulations. For further information, refer to
the Product Material Safety Data Sheet.
Additional Information
Estop manufactures and offers a wide range of

complementary products, which includes
waterstops, waterproofing products, grouts,
anchors, specialized flooring products. In addition, a
wide range of products formulated for repair and
refurbishment of spalled concrete are available.
Rev 01/tech/VI/20

ESTOP TDS - Estoflex PU 980 (AR) R1

Uploaded by

Copyright:

Available Formats

ESTOP TDS - Estoflex PU 980 (AR) R1

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ESTOP TDS - Estoflex PU 980 (AR) R1

Uploaded by

Copyright:

Available Formats

Estoflex PU 980 (AR)

Two Component Polyurethane for

Denka group www.hissan.co.id

Store in the dry conditions between 5 – 30 °C.

Estop manufactures and offers a wide range of

You might also like