Scribd Logo
Upload

Welcome to Scribd!

  • 506 views

    Base Plate

    Uploaded by

    jasonjason
    This document provides design calculations for a truss support connection using a 250x250 SHS pin and a 300mm thick base plate. The calculations include: sizing the base plate area to 5000mm2 to support an axial load of 80kN; designing fillet welds around the base plate to support tension and shear loads; selecting 4 M16 grade 8.8 bolts based on tension, shear, and combined loading capacity; and checking bolt spacing, edge distance, bearing capacity and anchorage bond stress against design requirements. The document concludes that the design passes all checks for the base plate, welds, bolts and their placement.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd

    Base Plate

    Uploaded by

    jasonjason
    506 views6 pages
    This document provides design calculations for a truss support connection using a 250x250 SHS pin and a 300mm thick base plate. The calculations include: sizing the base plate area to 5000mm2 to support an axial load of 80kN; designing fillet welds around the base plate to support tension and shear loads; selecting 4 M16 grade 8.8 bolts based on tension, shear, and combined loading capacity; and checking bolt spacing, edge distance, bearing capacity and anchorage bond stress against design requirements. The document concludes that the design passes all checks for the base plate, welds, bolts and their placement.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides design calculations for a truss support connection using a 250x250 SHS pin and a 300mm thick base plate. The calculations include: sizing the base plate area to 5000mm2 to support an axial load of 80kN; designing fillet welds around the base plate to support tension and shear loads; selecting 4 M16 grade 8.8 bolts based on tension, shear, and combined loading capacity; and checking bolt spacing, edge distance, bearing capacity and anchorage bond stress against design requirements. The document concludes that the design passes all checks for the base plate, welds, bolts and their placement.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    506 views6 pages

    Base Plate

    Uploaded by

    jasonjason
    This document provides design calculations for a truss support connection using a 250x250 SHS pin and a 300mm thick base plate. The calculations include: sizing the base plate area to 5000mm2 to support an axial load of 80kN; designing fillet welds around the base plate to support tension and shear loads; selecting 4 M16 grade 8.8 bolts based on tension, shear, and combined loading capacity; and checking bolt spacing, edge distance, bearing capacity and anchorage bond stress against design requirements. The document concludes that the design passes all checks for the base plate, welds, bolts and their placement.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 6

    250x250 SHS (Pin) T1

    Page 1

    TRUSS SUPPORT CONNECTION DESIGN From S-Frame Analysis: Critical Design Load: Compression, C Tension, T BASEPLATE DESIGN Concrete Strength, fcu = = = x = 40 16 C / Pc 300 90000 N/mm2 N/mm2 = 5000 mm2 Axial force Shear force KN Fx (KN) Fy (KN) 80 0 0 70 94 2.1 5.4

    Pc = 0.4fcu

    Required Baseplate Area, A Provide 300

    Base plate mm2 > 5000 mm2

    Provided Baseplate Area, Ap

    Plate Thickness: t = 2.5w pyp (a2-0.3b2)


    1/2

    where

    pyp a b w

    = = = = = x

    265 48.4 48.2 C / Ap 3.7 300

    N/mm2 mm mm = mm x 0.89 20

    (Assume t 40 mm)

    N/mm2 20 mm mm > T=11

    Provide baseplate

    t 300

    thick M.S. Plate

    250x250 SHS (Pin) T1 WELD DESIGN ON BASE PLATE Ultimate axial load (tension) Resultant shear force = = ( = 94 KN 2.1 2 + 5.79 KN D= B= 2D + 2B 0.313 0.019 0 150 = kN/mm kN/mm

    Page 2

    5.4 2)0.5 KN

    Weld all around the support member,

    mm mm 300 mm

    Weld Length Tension per weld length, T Shear load on CHS weld, SF Max. resultant load on weld

    = = = = = mm =

    ( T2 + SF2)1/2 0.314 kN/mm fillet weld all around ( Pw = 0.45 kN/mm 215 > N/mm2 ) 0.31 kN/mm

    Provide Weld Strength

    HOLDING DOWN BOLT DESIGN Provide Properties : At, tensile stress area As, single shear pt, tension strength ps, shear strength Pbb, Bearing strength of bolt Pbs, bearing strength of plate = = = = = = 157 mm2 157 mm2 560 N/mm2 375 N/mm2 1000 N/mm2 275 N/mm2 4 No's M 16 gr. 8.8 bolts

    Tension per bolt Shear per bolt

    = = = = = = = =

    23.5 1.4 0.8ptAt 70.34 psAs 58.88 Fs Ps 0.36

    kN kN

    Tension Capacity per bolt, Pt

    kN

    >

    23.5

    kN

    Shear capacity per bolt, Ps

    kN + < Ft Pt 1.4

    >

    1.4 1.4

    kN

    Combined Shear and Tension

    PASSED!

    250x250 SHS (Pin) T1

    Page 3

    Minimum spacing Maximum spacing Minimum edge distance Maximum edge distance

    = = = =

    2.5d 14t 1.40D 11t

    = = = =

    40 280 25 224

    mm mm mm mm (D = d + 2) ( = (275 / p

    Bolt spacing:

    Max Min Max Min

    = = = =

    250 250 25 25

    < > <

    280 40 224 25

    mm mm mm mm

    PASSED! PASSED! PASSED! PASSED!

    Edge distance:

    Bearing Capacity, Pb Capacity of bolt, Pbb Capacity of plate, Pbs Pbs Pb = = = = dtpPbb dtpPbs 68.75 68.75 KN KN > 1.4 KN PASSED! ( Resultant Shear per bolt) = = 320 88 KN KN > 1/2etpPbs 68.75

    ULTIMATE ANCHORAGE BOND STRESS Total Tension per bolt = 94 4 23.5 BFcu1/2 0.50 x 40 1/2 3.16 F3 D 23500 50.27 N/mm2 X 1 L 1 L KN

    = fbu = = = fb =

    3.16

    147.8 mm

    Provide embedded length = 150 mm

    250x250 SHS (Pin) T1

    Page 4

    PASSED!

    250x250 SHS (Pin) T1

    Page 5

    PASSED!

    PASSED!

    PASSED!

    250x250 SHS (Pin) T1

    Page 6

    (D = d + 2) ( = (275 / pyp)1/2)

    PASSED! PASSED! PASSED! PASSED!

    1/2etpPbs KN

    PASSED! nt Shear per bolt)

    You might also like