Tee Mecanica Ranurada

IPS CARBON STEEL PIPE - HOLE CUT PRODUCTS 11.
02
Mechanical-T® Bolted Branch Outlets SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS
STYLES 920 AND 920N
Victaulic Mechanical-T® Outlet provides a direct branch connection at any location a hole can
be cut in pipe. The hole is cut oversize to receive a “holefinder” locating collar which secures
the outlet in position permanently. A pressure responsive gasket seals on the pipe O.D.
Cross-type connections can be achieved by utilizing two upper housings of the same style and
size, with the same or differing branch size connections. NOTE: Style 920 and Style 920N
housings cannot be mated to achieve a cross connection.
Style 920 and Style 920N Mechanical-T outlets are available with grooved or female threaded STYLES 920 AND 920N STYLE 920 CROSS
outlet. Specify choice on order. Units are supplied painted with plated bolts. Galvanized hous- PATENTED
ings are available, supplied with plated bolts.
All sizes of Style 920 and 920N are rated at 500 psi/3450 kPa working pressure on Schedule
10 and 40 carbon steel pipe. They may also be used on high density polyethylene or poly-
butylene (HDPE) pipe. Pressure ratings on HDPE are dependent on the pipe rating. Contact
Victaulic for ratings on other pipe. Style 920 and 920N are not recommended for use on
PVC plastic pipe.
Standard piping practices dictate that the Mechanical-T Styles 920 and 920N must be
installed so that the main and branch connections are a true 90° angle when permanently
attached to the pipeline surface.
MATERIAL SPECIFICATIONS Housing/Coating: Ductile iron conforming to ASTM A-536, grade 65-45-12, with orange enamel
coating. Ductile iron conforming to ASTM A-395, grade 65-45-15, is available upon special
request.
• Optional: Hot dipped galvanized
Gasket: (Specify choice*)

• Grade “E” EPDM
EPDM (Green color code). Temperature range –30°F to +230°F/–34°C to +110°C.
Recommended for cold and hot water service within the specified temperature range plus a
variety of dilute acids, oil-free air and many chemical services. UL Classified in accordance
with ANSI/NSF 61 for cold +86°F/+30°C and hot +180°F/+82°C. NOT RECOMMENDED FOR
PETROLEUM SERVICES.
• Grade “T” nitrile

Nitrile (Orange color code). Temperature range –20°F to +180°F/–29°C to +82°C.
Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the
specified temperature range. Not recommended for hot water services over +150°F/+66°C or
for hot dry air over +140°F/+60°C.
*Services listed are General Service Recommendations only. It should be noted that there are
services for which these gaskets are not recommended. Reference should always be made to
the latest Victaulic Gasket Selection Guide for specific gasket service recommendations and for a
listing of services which are not recommended.
Bolts/Nuts: Heat-treated plated carbon steel, trackhead meeting the physical and chemical
requirements of ASTM A-449 and physical requirements of ASTM A-183.
JOB OWNER CONTRACTOR ENGINEER

System No. __________________________ Submitted By ________________________ Spec Sect ____________ Para __________
Location ____________________________ Date ________________________________ Approved ___________________________
Date ________________________________
www.victaulic.com
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA.
REV_I 11.02_1
IPS CARBON STEEL PIPE - HOLE CUT PRODUCTS 11.02
STYLES 920 AND 920N
STYLES 920 AND 920N STYLE 920 CROSS

PATENTED
DIMENSIONS
Style Max. Work Approx.
Size No. Pressure Dimensions Weight Each
Run × Branch Hole V‡# V‡ Female
Nominal Size 920 Diameter T** Thd. Grv. W Y Z Thd. Grv.
Inches or psi +0.13 Inches Inches Inches Inches Inches Inches Lbs. Lbs.
Y Z mm 920N kPa -0.00 mm mm mm mm mm mm kg kg
2 ½ (a) 500 1.50 2.00 2.53 1.61 5.35 2.75 3.1
× 920N — —
50 15 3450 38.1 51 64 41 136 70 1.5
V
¾ (a) 500 1.50 1.97 2.53 1.61 5.35 2.75 3.1
920N — —
20 3450 38.1 50 64 41 136 70 1.5
1 (a) 500 1.50 1.85 2.53 1.61 5.35 2.75 3.0
W 920N — —
25 3450 38.1 47 64 41 136 70 1.4
1 ¼ (a) † 500 1.75 2.05 2.75 3.00 1.61 5.35 3.00 3.5 3.2
920N
GROOVED OUTLET 32 3450 44.5 52 70 76 41 136 76 1.7 1.5
1 ½ (a) † 500 1.75 2.03 2.75 3.12 1.61 5.35 3.25 3.6 3.2
920N
40 3450 44.5 52 70 79 41 136 83 1.7 1.5
Y Z 2½ ½ (a) 500 1.50 2.21 2.74 91.82 5.64 2.75 3.0
× 920N — —
65 15 3450 38.1 56 70 46 143 70 1.4
¾ (a) 500 1.50 2.18 2.74 1.82 5.64 2.75 3.0
V 920N — —
20 3450 38.1 55 70 46 143 70 1.4
T
1 (a) 500 1.50 2.06 2.74 1.82 5.64 2.75 2.9
920N — —
25 3450 38.1 52 70 46 143 70 1.4
W 1 ¼ † (a) 500 1.75 2.30 3.00 3.25 1.82 6.29 3.00 3.5 3.2
32 920N 3450 44.5 58 76 83 46 160 76 1.7 1.5
1 ½ † (a) 500 2.00 2.28 3.00 3.25 1.82 6.26 3.25 3.6 3.3
FEMALE THREADED OUTLET 920N
40 3450 50.8 58 76 83 46 159 83 1.7 1.6
½ (a) 300 1.50 2.22 2.75 2.25 6.46 3.18 3.9
76.1 × 920 — —
15 2065 38.1 56 70 57 164 81 1.8
• Provides a direct branch connection at ¾ (a) 300 1.50 2.19 2.75 2.25 6.46 3.18 3.9
920 — —
any location where a hole can be cut 20 2065 38.1 56 70 57 164 81 1.8
in the pipe 1 (a) 920 300 1.50 2.07 2.75 — 2.25 6.46 3.18 3.8 —
25 2065 38.1 53 70 57 164 81 1.7
• A pressure responsive gasket provides 1 ¼ (a)
920
500 1.75 2.30 3.00 3.31 1.92 6.29 3.00 3.5 3.2
32 3450 44.5 58 76 84 49 160 76 1.6 1.5
the seal
1 ½ (a) 500 2.00 2.28 3.00 3.31 1.92 6.29 3.25 3.5 3.3
920
• Request Publication 11.03 for 40 3450 50.8 58 76 84 49 160 83 1.6 1.5
Mechanical-T cross assemblies 3 ½ (a) 500 1.50 2.52 3.05 2.28 6.15 2.75 3.4
× 920N — —
80 15 3450 38.1 64 78 58 156 70 1.6
• Pressure rated up to 500 psi/3450 kPa ¾ (a)
920N
500 1.50 2.49 3.05
—
2.28 6.15 2.75 3.4
—
on steel pipe; also available for use 20 3450 38.1 63 78 58 156 70 1.6
with HDPE pipe 1 (a) 500 1.50 2.38 3.06 2.28 6.15 2.75 3.3
920N — —
25 3450 38.1 61 78 58 156 70 1.6
• Sizes from 2 × ½"/50 × 15 mm 1 ¼ (a) †)
920N
500 1.75 2.55 3.25 3.56 2.28 6.15 3.00 3.8 3.7
32 (b 3450 44.5 65 83 90 58 156 76 1.8 1.8
through 8 × 4"/200 × 100 mm
1 ½ (a) † 500 2.00 2.78 3.50 3.56 2.28 6.15 3.25 4.1 3.8
920N
40 (b) 3450 50.8 71 89 90 58 156 83 1.9 1.8
2 (a) 500 2.50 2.75 3.50 3.56 2.28 6.75 3.88 4.9 4.6
920N
50 3450 63.5 70 89 90 58 172 99 2.3 2.1
3½ 2 500 2.50 3.75 2.44 6.72 3.88 3.8
× 920N — — —
90 50 3450 63.5 95 62 171 99 1.8
IMPORTANT NOTES: TABLE CONTINUED ON PG. 3
Style 920 and Style 920N housings cannot be

mated to one another
to achieve cross connections.
www.victaulic.com
11.02_2 REV_I
STYLES 920 AND 920N
PATENTED
DIMENSIONS
TABLE CONTINUED FROM PAGE 2
V 4 ½ (a) 500 1.50 3.03 3.56 2.69 7.01 2.75 3.7

× 920N — —
100 15 3450 38.1 77 90 68 178 70 1.8
¾ (a) 500 1.50 3.00 3.56 2.69 7.01 2.75 3.7
920N — —
20 3450 38.1 76 90 68 178 70 1.8
W
1 (a) 500 1.50 2.88 3.56 2.69 7.01 2.75 3.6
920N — —
25 3450 38.1 73 90 68 178 70 1.8
GROOVED OUTLET 1 ¼ (a) † 500 1.75 3.08 3.78 4.00 2.69 7.01 3.00 4.0 3.6
920N
32 (b) 3450 44.5 78 96 102 68 178 76 1.9 1.8
1 ½ (a) † 500 2.00 3.28 4.00 4.00 2.69 7.01 3.25 4.2 3.9
920N
Y Z 40 (b) 3450 50.8 83 102 102 68 178 83 2.0 1.9
2 (a) † 500 2.50 3.25 4.00 4.00 2.69 7.01 3.88 5.0 4.6
920N
50 3450 63.5 83 102 102 68 178 99 2.3 2.1
V 2 ½ (a) † 500 2.75 2.88 4.00 4.00 2.69 7.34 4.63 5.8 5.0
T 920
65 3450 69.9 73 102 102 68 186 118 2.6 2.3
500 2.75 4.00 2.69 7.34 4.63 6.4
W 76.1 mm 920 — — —
3450 69.9 102 68 186 118 2.9
3 (a) † 500 3.50 3.31 4.50 4.12 2.69 7.73 5.12 8.4 6.4
920
80 3450 88.9 84 114 105 68 196 130 3.8 2.9
FEMALE THREADED OUTLET
1 ¼ (a) 500 1.75 3.08 3.78 2.63 7.64 3.05 5.0
108.0 × 920N — —
32 3450 44.5 78 96 67 194 78 2.3
1 ½ (a) 500 2.00 3.28 4.00 2.63 7.64 3.25 5.0
920N — —
• Provides a direct branch connection at 40 3450 50.8 83 102 67 194 83 2.3
any location where a hole can be cut 2 (a)
920N
500 2.50 3.25 4.00
—
2.63 7.64 4.00 4.0
—
in the pipe 50 3450 63.5 83 102 67 194 102 1.9
500 2.75 2.88 4.00 4.00 2.63 7.64 4.29 8.0
76.1 mm 920 —
• A pressure responsive gasket provides 3450 69.9 73 102 102 67 194 109 3.6
the seal 3 (a)
920
500 3.50 3.31 4.50
—
2.63 7.63 4.88 6.8 6.5
80 3450 88.9 84 114 67 194 124 3.1 3.0
• Request Publication 11.03 for 5 1 ½ (a) †
920
500 2.00 4.03 4.75 4.75 3.16 9.70 3.69 7.4 7.6
×
Mechanical-T cross assemblies 125 40 3450 50.8 102 121 121 80 246 94 3.4 3.4
2 (a) † 500 2.50 4.00 4.75 4.75 3.16 9.70 4.38 8.2 8.0
920
• Pressure rated up to 500 psi/3450 kPa 50 3450 63.5 102 121 121 80 246 111 3.7 3.6
on steel pipe; also available for use 2 ½ (a) †
920
500 2.75 3.63 4.75 4.75 3.16 9.70 4.63 8.3 7.9
65 3450 69.9 92 121 121 80 246 118 3.8 3.6
with HDPE pipe
500 2.75 4.75 3.16 9.70 4.63 8.0
76.1 mm 920 — — —
• Sizes from 2 × ½"/50 × 15 mm 3450 69.9 121 80 246 118 3.6
through 8 × 4"/200 × 100 mm 3 (a) † 500 3.50 3.81 5.00 4.63 3.16 9.70 5.31 8.4 8.8
920
80 3450 88.9 97 127 118 80 246 135 3.8 4.0
2 500 2.50 3.75 4.50 3.17 8.00 3.88 8.0
133.0 × 920N — —
50 3450 63.5 95 114 81 203 99 3.6
3 500 3.50 3.81 5.00 3.00 9.46 5.31 8.0
920 — —
80 3450 88.9 97 127 76 240 135 3.6
TABLE CONTINUED ON PG. 4
IMPORTANT NOTES:
www.victaulic.com
REV_I 11.02_3
STYLES 920 AND 920N

PATENTED
DIMENSIONS
1½ † 500 2.00 3.78 4.50 3.30 8.23 3.25 7.0
V 139.7 × 920N — —
40 3450 50.8 96 114 84 209 83 3.2
2† 500 2.50 3.75 4.50 3.30 8.23 3.88 9.0
920N — —
50 3450 63.5 95 114 84 209 99 4.1
W
500 2.75 3.63 4.75 3.13 9.85 4.63 8.8
76.1 mm 920 — —
3450 69.9 92 121 80 250 118 4.0
GROOVED OUTLET 500 3.50 4.63 3.16 9.70 5.31 11.0
76.1 mm 920 — — —
3450 88.9 118 80 246 135 5.0
3 500 3.50 3.81 5.00 4.63 3.16 9.85 5.38 14.0 14.2
920
Y Z 88.9 3450 88.9 96.80 127 118 80 250 137 6.4 6.4
6 1 ¼ (a) 500 1.75 4.43 3.79 9.15 3.25 4.8
× 920N — — —
150 32 (b) 3450 44.5 112 96 232 83 2.2
V 1 ½ (a) † 500 2.00 4.40 5.13 5.13 3.79 9.15 3.25 5.4 5.1
T 920N
40 (b) 3450 50.8 112 130 130 96 232 83 2.4 2.3
2 (a) † 500 2.50 4.38 5.13 5.13 3.79 9.15 3.88 6.0 5.6
920N
W 50 3450 63.5 111 130 130 96 232 99 2.7 2.5
2 ½ (a) † 500 2.75 4.01 5.13 5.12 3.69 10.51 4.63 8.3 7.6
920
65 3450 69.9 110 130 130 94 267 118 3.8 3.4
500 2.75 5.21 3.69 10.51 4.63 8.4
76.1 mm 920 — — —
3450 69.9 132 94 267 118 3.8
3 (a) † 500 3.50 4.31 5.50 5.13 3.69 10.51 5.31 9.9 8.4
920
• Provides a direct branch connection at 80 3450 88.9 110 140 130 94 267 135 4.5 3.8
any location where a hole can be cut 4 (a) †
920
500 4.50 3.81 5.75 5.38 3.69 10.51 6.25 10.1 10.1
in the pipe 100 3450 114.3 97 146 137 94 267 159 4.6 4.6
1¼ 500 1.75 4.43 5.13 3.63 9.40 3.25 9.0 8.7
159.0 × 920N —
• A pressure responsive gasket provides 32 3450 44.5 113 130 92 239 83 4.1 4.0
the seal 1 ½ (a)
920N
500 2.00 4.41 5.13
—
3.63 9.40 3.25 7.8
—
40 3450 50.8 112 130 92 239 83 3.5
• Request Publication 11.03 for 2 (a)
920N
500 2.50 4.38 5.13
—
3.63 9.40 3.88 8.0
—
Mechanical-T cross assemblies 50 3450 63.5 111 130 92 239 99 3.6
500 2.75 4.38 5.50 5.13 3.63 9.40 4.63 9.5 9.5
76.1 mm 920
• Pressure rated up to 500 psi/3450 kPa 3450 69.9 111 140 130 92 239 118 4.3 4.3
on steel pipe; also available for use 3
920
500 3.50 4.31 5.50 5.13 3.63 9.40 5.31 8.1 14.0
80 3450 88.9 110 140 130 92 239 135 3.7 6.4
with HDPE pipe
500 4.50 5.38 3.63 9.40 6.12 10.0
108.1 mm 920 — — —
• Sizes from 2 × ½"/50 × 15 mm 3450 114.3 137 92 239 155 4.5
through 8 × 4"/200 × 100 mm 4 500 4.50 3.81 5.75 3.63 9.40 6.25 18.0
920 — —
100 3450 114.3 96.80 146 92 239 159 8.2
TABLE CONTINUED ON PG. 5
IMPORTANT NOTES:
www.victaulic.com
11.02_4 REV_I
STYLES 920 AND 920N
PATENTED
DIMENSIONS
1 500 1.50 3.88 4.56 3.79 9.34 2.75 8.0
V 165.1 × 920 — —
25 3450 38.1 99 116 96 237 70 3.6
1¼ 500 1.75 4.43 5.13 3.79 9.34 3.25 8.4
920 — —
32 3450 44.5 113 130 96 237 83 3.8
W
1 ½ (a) † 500 2.00 4.41 5.13 3.79 9.34 3.25 8.4
920 — —
40 3450 50.8 112 130 96 237 83 3.8
GROOVED OUTLET 2 (a) † 500 2.50 4.38 5.13 3.79 9.34 3.88 8.5
920 — —
50 3450 63.5 111 130 96 237 99 3.9
2½ † 500 2.75 4.01 5.13 3.63 10.51 4.63 8.6 7.6
920 —
Y Z 65 3450 69.9 110 130 92 267 118 3.9 3.4
500 2.75 4.01 5.13 5.21 3.63 10.51 4.63 8.6 7.6
76.1 mm 920
3450 69.9 110 130 132 92 267 118 3.9 3.4
V 3 (a) † 500 3.50 4.31 5.50 5.13 3.63 10.51 5.31 10.2 8.4
T 920
80 3450 88.9 110 140 130 92 267 135 4.6 3.8
4 (a) † 500 4.50 3.81 5.75 5.38 3.63 10.51 6.25 10.5 8.4
920
W 100 3450 114.3 97 146 137 92 267 159 4.8 3.8
8 2 (a) † 500 2.75 5.44 6.19 6.25 4.81 12.42 4.50 11.6 11.6
× 920
200 50 3450 69.9 138 157 159 122 316 114 5.3 5.3
2 ½ (a) † 500 2.75 5.07 6.19 6.19 4.81 12.42 4.50 11.6 11.6
920
65 3450 69.9 129 157 157 122 316 114 5.3 5.3
500 2.75 6.25 4.81 12.42 4.56 11.6
76.1 mm 920 — — —
• Provides a direct branch connection at 3450 69.9 159 122 316 116 5.3
any location where a hole can be cut 3 (a) †
920
500 3.50 5.31 6.50 6.50 4.81 12.42 5.31 12.6 11.6
in the pipe 80 3450 88.9 135 165 165 122 316 135 5.7 5.3
4 (a) † 500 4.50 4.81 6.75 6.38 4.81 12.42 6.25 15.3 12.5
920
• A pressure responsive gasket provides 100 3450 114.3 122 171 162 122 316 159 6.9 5.7
the seal ** Center of run to engaged pipe end, female threaded outlet only (dimensions approximate).
† Available with grooved or female threaded outlet. Specify choice on order.
• Request Publication 11.03 for
‡ Center of run to end of fitting.
Mechanical-T cross assemblies
# Female threaded outlets are available to NPT and BSPT specifications.
• Pressure rated up to 500 psi/3450 kPa (a) British Standard female pipe threaded outlet is available as listed. Specify “BSPT” clearly on order.
on steel pipe; also available for use (b) For 76.1 mm threaded outlet, specify 2½" BSPT clearly on order.
with HDPE pipe
• Sizes from 2 × ½"/50 × 15 mm
through 8 × 4"/200 × 100 mm
IMPORTANT NOTES:
www.victaulic.com
REV_I 11.02_5
STYLES 920 AND 920N

PATENTED
FLOW DATA Flow test data has shown that the total head loss between point (1) and (2) for the Style 920, 900N
and 929 Mechanical-T® fittings can best be expressed in terms of the pressure difference across the
inlet and branch. The pressure difference can be obtained from the relationship below.
2 CV Values
Values for flow of water at +60°F/+16°C are shown in the table below.
Equivalent Length Equivalent Length
SIZE Feet/meter of Pipe SIZE Feet/meter of Pipe
Nominal Actual Nominal Actual
Diameter Out. Dia. Female Diameter Out. Dia. Female
In./mm In./mm Grooved Threaded In./mm In./mm Grooved Threaded
1 ½ 0.840 2.0 2 2.375 9.0 10.5
—
15 21.3 0.6 50 60.3 2.7 3.2
¾ 1.050 4.0 2½ 2.875 11.0 12.5
—
20 26.7 1.2 65 73.0 3.4 3.8
Exaggerated for Clarity 1 1.315
—
5.0 3 3.500 13.5 15.5
25 33.7 1.5 80 88.9 4.1 4.7
1¼ 1.660 5.5 6.0 4 4.500 20.0 22.0
32 42.4 1.7 1.8 100 114.3 6.1 6.7
1½ 1.900 7.0 8.0
40 48.3 2.1 2.4
Formulas for CV Values:
ΔP = Q2 Where:
Cv2 Q = Flow (GPM)
ΔP = Pressure Drop (psi)
Q = Cv x ΔP Cv = Flow Coefficient
Size CV Size CV Size CV

Actual Actual Actual
Nominal Outside Nominal Outside Nominal Outside
Size Diameter Size Diameter Size Diameter
Inches/mm Inches/mm Values Inches/mm Inches/mm Values Inches/mm Inches/mm Values
½ 0.840 1¼ 1.660 45 2½ 2.875 135
15 21.3 17 32 42.4 65 73.0
¾ 1.050 21 1½ 1.900 60 3 3.500 200
20 26.7 40 48.3 80 88.9
1 1.315 25 2 2.375 100 4 4.500 400
25 33.7 50 60.3 100 114.3
www.victaulic.com
11.02_6 REV_I
STYLES 920 AND 920N
PATENTED
APPROVED PRESSURE RATINGS The information provided below is based on the latest listing and approval data at the time of publi-
cation. Listings/Approvals are subject to change and/or additions by the approvals agencies. Contact
Victaulic for performance on other pipe and the latest listings and approvals.
Run Size Outlet Size Pipe Rated Working Pressures – psi/kPa

Actual
Nominal Outside
Size Diameter
Inches/mm Inches/mm Inches/mm Schedule UL ULC FM
21/2 - 6 2.875 - 6.625 All 10, 40 400 400 400
65 - 150 73.0 - 168.3 2755 2755 2755
21/2 - 4 2.875 - 4.500 All DF 300 300 300
65 - 100 73.0 - 114.3 2065 2065 2065
21/2 - 4 2.875 - 4.500 All SF 300 300 300
65 - 100 73.0 - 114.3 2065 2065 2065
6 6.625 3, 4 10 300 300 250
150 168.3 2065 2065 1724
6 6.625 3,4 30, 40 300 300 300
150 168.3 2065 2065 2065
8 8.625 21/2 10, 40 400 — —
200 219.1 2755
8 8.625 3,4 10 300 — 250
200 219.1 2065 1724
8 8.625 3,4 30, 40 300 — 300
200 219.1 2065 2065
NOTES:
10 refers to Listed/Approved Schedule 10 steel sprinkler pipe.
40 refers to Listed/Approved Schedule 40 steel sprinkler pipe.
DF refers to Listed/Approved Dyna-Flow steel sprinkler pipe manufactured by American Tube Company.
SF refers to Listed/Approved Super-Flo steel sprinkler pipe manufactured by Allied Tube and Conduit
Corporation.
www.victaulic.com
REV_I 11.02_7
STYLES 920 AND 920N

PATENTED
WARRANTY Refer to the Warranty section of the current Price List or contact Victaulic for details.
NOTE This product shall be manufactured by Victaulic or to Victaulic specifications. All products to be
installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the
right to change product specifications, designs and standard equipment without notice and without
incurring obligations.
US & WORLD HEADQUARTERS CANADA CENTRAL AND SOUTH AMERICA

P.O. Box 31 905-884-7444 1-610-559-3300
Easton, PA 18044-0031 USA 905-884-9774 (fax) 1-610-559-3608 (fax)
[email protected] [email protected]
4901 Kesslersville Road
Easton, PA 18040 USA
EUROPE ASIA PACIFIC
1-800-PICK-VIC (1-800-742-5842)
32-9-381-15-00 86-21-54253300
1-610-559-3300
32-9-380-44-38 (fax) 86-21-54253671 (fax)
1-610-250-8817 (fax)
[email protected] [email protected]
[email protected]
UNITED KINGDOM MIDDLE EAST
www.victaulic.com
44 (0) 1438741100 971-4-883-88-70
44 (0) 1438313883 (fax) 971-4-883-88-60 (fax) WCAS-6K2HN3
[email protected]
UPDATED 3/06
11.02 1480 REV I
11.02_8

Tee Mecanica Ranurada

Uploaded by

Copyright:

Available Formats

Tee Mecanica Ranurada

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tee Mecanica Ranurada

Uploaded by

Copyright:

Available Formats

IPS CARBON STEEL PIPE - HOLE CUT PRODUCTS 11.

STYLES 920 AND 920N

Gasket: (Specify choice*)

• Grade “T” nitrile

JOB OWNER CONTRACTOR ENGINEER

STYLES 920 AND 920N

STYLES 920 AND 920N STYLE 920 CROSS

Style 920 and Style 920N housings cannot be

STYLES 920 AND 920N

STYLES 920 AND 920N STYLE 920 CROSS

V 4 ½ (a) 500 1.50 3.03 3.56 2.69 7.01 2.75 3.7

STYLES 920 AND 920N

STYLES 920 AND 920N STYLE 920 CROSS

STYLES 920 AND 920N

STYLES 920 AND 920N STYLE 920 CROSS

STYLES 920 AND 920N

STYLES 920 AND 920N STYLE 920 CROSS

Formulas for CV Values:

Size CV Size CV Size CV

STYLES 920 AND 920N

STYLES 920 AND 920N STYLE 920 CROSS

Run Size Outlet Size Pipe Rated Working Pressures – psi/kPa

STYLES 920 AND 920N

STYLES 920 AND 920N STYLE 920 CROSS

US & WORLD HEADQUARTERS CANADA CENTRAL AND SOUTH AMERICA

You might also like