Argon

Argon
Safety Data Sheet P-4563

This SDS conforms to U.S. Code of Federal Regulations 29 CFR 1910.1200, Hazard Communication.
Date of issue: 01/01/1979 Revision date: 10/13/2016 Supersedes: 10/03/2014
SECTION: 1. Product and company identification

1.1. Product identifier
Product form : Substance
Name : Argon
CAS No : 7440-37-1
Formula : Ar
Other means of identification : Shielding gas, argon 40
1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture : Industrial use. Use as directed.
1.3. Details of the supplier of the safety data sheet
Praxair, Inc.
10 Riverview Drive
Danbury, CT 06810-6268 - USA
T 1-800-772-9247 (1-800-PRAXAIR) - F 1-716-879-2146
www.praxair.com
1.4. Emergency telephone number
Emergency number : Onsite Emergency: 1-800-645-4633
CHEMTREC, 24hr/day 7days/week

— Within USA: 1-800-424-9300, Outside USA: 001-703-527-3887
(collect calls accepted, Contract 17729)
SECTION 2: Hazard identification

2.1. Classification of the substance or mixture
GHS-US classification
Compressed gas H280
2.2. Label elements

GHS-US labeling
Hazard pictograms (GHS-US) :
GHS04
Signal word (GHS-US) : WARNING
Hazard statements (GHS-US) : H280 - CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED
OSHA-H01 - MAY DISPLACE OXYGEN AND CAUSE RAPID SUFFOCATION
Precautionary statements (GHS-US) : P202 - Do not handle until all safety precautions have been read and understood
P271+P403 - Use and store only outdoors or in a well-ventilated place
CGA-PG05 - Use a back flow preventive device in the piping
CGA-PG10 - Use only with equipment rated for cylinder pressure
CGA-PG06 - Close valve after each use and when empty
CGA-PG02 - Protect from sunlight when ambient temperature exceeds 52°C (125°F)
2.3. Other hazards

Other hazards not contributing to the : Asphyxiant in high concentrations.
classification
2.4. Unknown acute toxicity (GHS US)
No data available
EN (English US) SDS ID: P-4563 1/9
This document is only controlled while on the Praxair, Inc. website and a copy of this controlled version is available for download. Praxair cannot assure the integrity or
accuracy of any version of this document after it has been downloaded or removed from our website.
Argon
SECTION 3: Composition/Information on ingredients

3.1. Substance
Name : Argon
CAS No : 7440-37-1
Name Product identifier %
Argon (CAS No) 7440-37-1 99.5 - 100
3.2. Mixture
Not applicable
SECTION 4: First aid measures

4.1. Description of first aid measures
First-aid measures after inhalation : Remove victim to uncontaminated area wearing self contained breathing apparatus. Keep
victim warm and rested. Call a doctor. Apply artificial respiration if breathing stopped.
First-aid measures after skin contact : Adverse effects not expected from this product.
First-aid measures after eye contact : Immediately flush eyes thoroughly with water for at least 15 minutes. Hold the eyelids open and
away from the eyeballs to ensure that all surfaces are flushed thoroughly. Contact an
ophthalmologist immediately.. Get immediate medical attention.
First-aid measures after ingestion : Ingestion is not considered a potential route of exposure.
4.2. Most important symptoms and effects, both acute and delayed
No additional information available
4.3. Indication of any immediate medical attention and special treatment needed
None.
SECTION 5: Firefighting measures

5.1. Extinguishing media
Suitable extinguishing media : Use extinguishing media appropriate for surrounding fire.
5.2. Special hazards arising from the substance or mixture
Reactivity : No reactivity hazard other than the effects described in sub-sections below.
5.3. Advice for firefighters
Firefighting instructions : Evacuate all personnel from the danger area. Use self-contained breathing apparatus (SCBA)
and protective clothing. Immediately cool containers with water from maximum distance. Stop
flow of gas if safe to do so, while continuing cooling water spray. Remove ignition sources if
safe to do so. Remove containers from area of fire if safe to do so. On-site fire brigades must
comply with OSHA 29 CFR 1910.156 and applicable standards under 29 CFR 1910 Subpart
L—Fire Protection.
Protection during firefighting : Compressed gas: asphyxiant. Suffocation hazard by lack of oxygen.
Special protective equipment for fire fighters : Use self-contained breathing apparatus. Standard protective clothing and equipment (Self
Contained Breathing Apparatus) for fire fighters.
Specific methods : Use fire control measures appropriate for the surrounding fire. Exposure to fire and heat
radiation may cause gas containers to rupture. Cool endangered containers with water spray jet
from a protected position. Prevent water used in emergency cases from entering sewers and
drainage systems
Stop flow of product if safe to do so
Use water spray or fog to knock down fire fumes if possible.
SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures
General measures : Prevent from entering sewers, basements and workpits, or any place where its accumulation
can be dangerous. Evacuate area. Ensure adequate air ventilation. Wear self-contained
breathing apparatus when entering area unless atmosphere is proven to be safe. Stop leak if
safe to do so.
Argon
6.1.1. For non-emergency personnel

6.1.2. For emergency responders
6.2. Environmental precautions
Try to stop release.
6.3. Methods and material for containment and cleaning up
6.4. Reference to other sections
See also sections 8 and 13.
SECTION 7: Handling and storage

7.1. Precautions for safe handling
Precautions for safe handling : Wear leather safety gloves and safety shoes when handling cylinders. Protect cylinders from
physical damage; do not drag, roll, slide or drop. While moving cylinder, always keep in place
removable valve cover. Never attempt to lift a cylinder by its cap; the cap is intended solely to
protect the valve. When moving cylinders, even for short distances, use a cart (trolley, hand
truck, etc.) designed to transport cylinders. Never insert an object (e.g, wrench, screwdriver,
pry bar) into cap openings; doing so may damage the valve and cause a leak. Use an
adjustable strap wrench to remove over-tight or rusted caps. Slowly open the valve. If the
valve is hard to open, discontinue use and contact your supplier. Close the container valve
after each use; keep closed even when empty. Never apply flame or localized heat directly to
any part of the container. High temperatures may damage the container and could cause the
pressure relief device to fail prematurely, venting the container contents. For other precautions
in using this product, see section 16.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions : Store in a cool, well-ventilated place. Store and use with adequate ventilation. Store only where
temperature will not exceed 125°F (52°C). Firmly secure containers upright to keep them from
falling or being knocked over. Install valve protection cap, if provided, firmly in place by hand.
Store full and empty containers separately. Use a first-in, first-out inventory system to prevent
storing full containers for long periods
OTHER PRECAUTIONS FOR HANDLING, STORAGE, AND USE: When handling product
under pressure, use piping and equipment adequately designed to withstand the pressures to
be encountered. Never work on a pressurized system. Use a back flow preventive device in the
piping. Gases can cause rapid suffocation because of oxygen deficiency; store and use with
adequate ventilation. If a leak occurs, close the container valve and blow down the system in a
safe and environmentally correct manner in compliance with all international, federal/national,
state/provincial, and local laws; then repair the leak. Never place a container where it may
become part of an electrical circuit.
7.3. Specific end use(s)
None.
SECTION 8: Exposure controls/personal protection

8.1. Control parameters
Argon (7440-37-1)
ACGIH Not established
USA OSHA Not established
Argon (7440-37-1)
ACGIH Not established
USA OSHA Not established
8.2. Exposure controls

Appropriate engineering controls : Oxygen detectors should be used when asphyxiating gases may be released. Systems under
pressure should be regularly checked for leakages. Provide adequate general and local
exhaust ventilation. Consider work permit system e.g. for maintenance activities.
Argon
Hand protection : Wear working gloves when handling gas containers.

Eye protection : Wear safety glasses with side shields.
Respiratory protection : When workplace conditions warrant respirator use, follow a respiratory protection program that
meets OSHA 29 CFR 1910.134, ANSI Z88.2, or MSHA 30 CFR 72.710 (where applicable).
Use an air-supplied or air-purifying cartridge if the action level is exceeded. Ensure that the
respirator has the appropriate protection factor for the exposure level. If cartridge type
respirators are used, the cartridge must be appropriate for the chemical exposure. For
emergencies or instances with unknown exposure levels, use a self-contained breathing
apparatus (SCBA).
Thermal hazard protection : None necessary.
Environmental exposure controls : None necessary.
Other information : Wear safety shoes while handling containers.
SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties
Physical state : Gas
Appearance : Colorless gas.
Molecular mass : 40 g/mol
Color : Colorless.
Odor : No odor warning properties.
Odor threshold : No data available
pH : Not applicable.
Relative evaporation rate (butyl acetate=1) : No data available
Relative evaporation rate (ether=1) : Not applicable.
Melting point : -189 °C
Freezing point : No data available
Boiling point : -185.9 °C
Flash point : No data available
Critical temperature : -122.4 °C
Auto-ignition temperature : Not applicable.
Decomposition temperature : No data available
Flammability (solid, gas) : No data available
Vapor pressure : Not applicable.
Critical pressure : 4898 kPa
Relative vapor density at 20 °C : No data available
Relative density : No data available
Density : 0.103 lb/ft3 Vapor density at 70°F (21.1°C)
Relative gas density : 1.38
Solubility : Water: 61 mg/l
Log Pow : Not applicable.
Log Kow : Not applicable.
Viscosity, kinematic : Not applicable.
Viscosity, dynamic : Not applicable.
Explosive properties : Not applicable.
Oxidizing properties : None.
Explosion limits : No data available
9.2. Other information
Gas group : Compressed gas
Additional information : Gas/vapor heavier than air. May accumulate in confined spaces, particularly at or below ground
level
Argon
SECTION 10: Stability and reactivity

10.1. Reactivity
No reactivity hazard other than the effects described in sub-sections below.
10.2. Chemical stability
Stable under normal conditions.
10.3. Possibility of hazardous reactions
None.
10.4. Conditions to avoid
None under recommended storage and handling conditions (see section 7).
10.5. Incompatible materials
Using this product in welding and cutting may create additional hazards. The arc from electric arc
welding may form gaseous reaction products such as carbon monoxide and carbon dioxide. Ozone
and nitrogen oxides may be formed by the radiation from the arc. Other decomposition products of
arc welding and cutting originate from the volatilization, reaction, and oxidization of the material
being worked.
10.6. Hazardous decomposition products
None.
SECTION 11: Toxicological information

11.1. Information on toxicological effects
Acute toxicity : Not classified
Skin corrosion/irritation : Not classified

pH: Not applicable.
Serious eye damage/irritation : Not classified
pH: Not applicable.
Respiratory or skin sensitization : Not classified
Germ cell mutagenicity : Not classified
Carcinogenicity : Not classified
Reproductive toxicity : Not classified
Specific target organ toxicity (single exposure) : Not classified
Specific target organ toxicity (repeated : Not classified
exposure)
Aspiration hazard : Not classified
SECTION 12: Ecological information

12.1. Toxicity
Ecology - general : No ecological damage caused by this product.
12.2. Persistence and degradability

Argon (7440-37-1)
Persistence and degradability No ecological damage caused by this product.
Argon (7440-37-1)
Persistence and degradability No ecological damage caused by this product.
12.3. Bioaccumulative potential
Argon (7440-37-1)
Log Pow Not applicable.
Log Kow Not applicable.
Bioaccumulative potential No ecological damage caused by this product.
Argon
Argon (7440-37-1)
Log Pow Not applicable.
Log Kow Not applicable.
Bioaccumulative potential No ecological damage caused by this product.
12.4. Mobility in soil
Argon (7440-37-1)
Mobility in soil No data available.
Ecology - soil No ecological damage caused by this product.
Argon (7440-37-1)
Mobility in soil No data available.
Ecology - soil No ecological damage caused by this product.
12.5. Other adverse effects

Effect on ozone layer : None
Effect on the global warming : None
SECTION 13: Disposal considerations

13.1. Waste treatment methods
Waste treatment methods : May be vented to atmosphere in a well ventilated place. Consult supplier for specific
recommendations. Do not discharge into any place where its accumulation could be
dangerous. Contact supplier if guidance is required.
Waste disposal recommendations : Dispose of contents/container in accordance with local/regional/national/international
regulations. Contact supplier for any special requirements.
SECTION 14: Transport information

In accordance with DOT
Transport document description : UN1006 Argon, compressed, 2.2
UN-No.(DOT) : UN1006
Proper Shipping Name (DOT) : Argon, compressed
Class (DOT) : 2.2 - Class 2.2 - Non-flammable compressed gas 49 CFR 173.115
Hazard labels (DOT) : 2.2 - Non-flammable gas
Additional information
Emergency Response Guide (ERG) Number : 121 (UN1006);120 (UN1951)
Other information : No supplementary information available.

Special transport precautions : Avoid transport on vehicles where the load space is not separated from the driver's
compartment. Ensure vehicle driver is aware of the potential hazards of the load and knows
what to do in the event of an accident or an emergency. Before transporting product containers:
- Ensure there is adequate ventilation. - Ensure that containers are firmly secured. - Ensure
cylinder valve is closed and not leaking. - Ensure valve outlet cap nut or plug (where provided)
is correctly fitted. - Ensure valve protection device (where provided) is correctly fitted.
Transport by sea
UN-No. (IMDG) : 1006
Proper Shipping Name (IMDG) : ARGON, COMPRESSED
Class (IMDG) : 2 - Gases
MFAG-No : 121
Argon
Air transport
UN-No. (IATA) : 1006
Proper Shipping Name (IATA) : Argon, compressed
Class (IATA) : 2
Civil Aeronautics Law : Gases under pressure/Gases nonflammable nontoxic under pressure
SECTION 15: Regulatory information

15.1. US Federal regulations
Argon (7440-37-1)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
SARA Section 311/312 Hazard Classes Sudden release of pressure hazard
All components of this product are listed on the Toxic Substances Control Act (TSCA)
inventory.
This product or mixture does not contain a toxic chemical or chemicals in excess
of the applicable de minimis concentration as specified in 40 CFR §372.38(a)
subject to the reporting requirements of section 313 of Title III of the Superfund
Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.
15.2. International regulations

CANADA
Argon (7440-37-1)
Listed on the Canadian DSL (Domestic Substances List)
Argon (7440-37-1)
Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
Argon (7440-37-1)
Listed on the EEC inventory EINECS (European Inventory of Existing Commercial Chemical Substances)
15.2.2. National regulations

Argon (7440-37-1)
Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on INSQ (Mexican National Inventory of Chemical Substances)
15.3. US State regulations

Argon(7440-37-1)
U.S. - California - Proposition 65 - Carcinogens List No
U.S. - California - Proposition 65 - Developmental No
Toxicity
U.S. - California - Proposition 65 - Reproductive No
Toxicity - Female
U.S. - California - Proposition 65 - Reproductive No
Toxicity - Male
State or local regulations U.S. - Massachusetts - Right To Know List
U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) List
Argon
California Proposition 65 - This product does not contain any substances known to the state of California to cause cancer,
developmental and/or reproductive harm
Argon (7440-37-1)
U.S. - California - U.S. - California - U.S. - California - U.S. - California - Non-significant risk level
Proposition 65 - Proposition 65 - Proposition 65 - Proposition 65 - (NSRL)
Carcinogens List Developmental Toxicity Reproductive Toxicity - Reproductive Toxicity - Male
Female
No No No No
Argon (7440-37-1)
U.S. - Massachusetts - Right To Know List
U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) List
SECTION 16: Other information

Other information : When you mix two or more chemicals, you can create additional, unexpected hazards. Obtain
and evaluate the safety information for each component before you produce the mixture.
Consult an industrial hygienist or other trained person when you evaluate the end product.
Before using any plastics, confirm their compatibility with this product
Fumes and gases produced during welding and cutting processes can be dangerous to your
health and may cause serious lung disease. KEEP YOUR HEAD OUT OF FUMES. DO NOT
BREATHE FUMES AND GASES. Use enough ventilation, local exhaust, or both to keep fumes
and gases from your breathing zone and the general area. Short-term overexposure to fumes
may cause dizziness, nausea, and dryness or irritation of the nose, throat, and eyes; or may
cause other similar discomfort. Contaminants in the air may add to the hazard of fumes and
gases. One such contaminant, chlorinated hydrocarbon vapors from cleaning and degreasing
activities, poses a special risk. DO NOT USE ELECTRIC ARCS IN THE PRESENCE OF
CHLORINATED HYDROCARBON VAPORS—HIGHLY TOXIC PHOSGENE MAY BE
PRODUCED. Metal coatings such as paint, plating, or galvanizing may generate harmful
fumes when heated. Residues from cleaning materials may also be harmful. AVOID ARC
OPERATIONS ON PARTS WITH PHOSPHATE RESIDUES (ANTI-RUST, CLEANING
PREPARATIONS)—HIGHLY TOXIC PHOSPHINE MAY BE PRODUCED
Praxair asks users of this product to study this SDS and become aware of the product hazards
and safety information. To promote safe use of this product, a user should (1) notify
employees, agents, and contractors of the information in this SDS and of any other known
product hazards and safety information, (2) furnish this information to each purchaser of the
product, and (3) ask each purchaser to notify its employees and customers of the product
hazards and safety information
The opinions expressed herein are those of qualified experts within Praxair, Inc. We believe
that the information contained herein is current as of the date of this Safety Data Sheet. Since
the use of this information and the conditions of use are not within the control of Praxair, Inc, it
is the user's obligation to determine the conditions of safe use of the product
Praxair SDSs are furnished on sale or delivery by Praxair or the independent distributors and
suppliers who package and sell our products. To obtain current SDSs for these products,
contact your Praxair sales representative, local distributor, or supplier, or download from
www.praxair.com. If you have questions regarding Praxair SDSs, would like the document
number and date of the latest SDS, or would like the names of the Praxair suppliers in your
area, phone or write the Praxair Call Center (Phone: 1-800-PRAXAIR/1-800-772-9247;
Address: Praxair Call Center, Praxair, Inc, P.O. Box 44, Tonawanda, NY 14151-0044)
PRAXAIR and the Flowing Airstream design are trademarks or registered trademarks of Praxair
Technology, Inc. in the United States and/or other countries.
Argon
NFPA health hazard : 0 - Exposure under fire conditions would offer no hazard
beyond that of ordinary combustible materials.
NFPA fire hazard : 0 - Materials that will not burn.
NFPA reactivity : 0 - Normally stable, even under fire exposure conditions,
and are not reactive with water.
NFPA specific hazard : SA - This denotes gases which are simple asphyxiants.
HMIS III Rating

Health : 0 Minimal Hazard - No significant risk to health
Flammability : 0 Minimal Hazard
Physical : 3 Serious Hazard
SDS US (GHS HazCom 2012) - Praxair
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as
guaranteeing any specific property of the product.

Argon

Uploaded by

Copyright:

Available Formats

Argon

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Argon

Uploaded by

Copyright:

Available Formats

Argon

Safety Data Sheet P-4563

SECTION: 1. Product and company identification

CHEMTREC, 24hr/day 7days/week

SECTION 2: Hazard identification

2.2. Label elements

2.3. Other hazards

EN (English US) SDS ID: P-4563 1/9

SECTION 3: Composition/Information on ingredients

SECTION 4: First aid measures

SECTION 5: Firefighting measures

Stop flow of product if safe to do so

Use water spray or fog to knock down fire fumes if possible.

SECTION 6: Accidental release measures

EN (English US) SDS ID: P-4563 2/9

6.1.1. For non-emergency personnel

SECTION 7: Handling and storage

SECTION 8: Exposure controls/personal protection

8.2. Exposure controls

Hand protection : Wear working gloves when handling gas containers.

SECTION 9: Physical and chemical properties

EN (English US) SDS ID: P-4563 4/9

SECTION 10: Stability and reactivity

SECTION 11: Toxicological information

Acute toxicity : Not classified

Skin corrosion/irritation : Not classified

SECTION 12: Ecological information

12.2. Persistence and degradability

EN (English US) SDS ID: P-4563 5/9

12.5. Other adverse effects

Effect on the global warming : None

SECTION 13: Disposal considerations

SECTION 14: Transport information

Other information : No supplementary information available.

EN (English US) SDS ID: P-4563 6/9

SECTION 15: Regulatory information

15.2. International regulations

15.2.2. National regulations

15.3. US State regulations

EN (English US) SDS ID: P-4563 7/9

SECTION 16: Other information

EN (English US) SDS ID: P-4563 8/9

HMIS III Rating

SDS US (GHS HazCom 2012) - Praxair

EN (English US) SDS ID: P-4563 9/9

You might also like