Scribd
Upload
199 views20 pages

Code & Specification For PPEs - TESCO

Uploaded by

Benasher Ibrahim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
199 views20 pages

Code & Specification For PPEs - TESCO

Uploaded by

Benasher Ibrahim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 20

Sr. No.

PPEs Applicable Standards


1 Safety Glasses 1. BS 7028:1999
2. BS EN 166 :2002
3. ANSI Z87.1-1989 (R1998)
4. Equivalent standards
2 Safety Helmets 1. ANSI Z89.1-2003
2. BS EN 397: 1995
4. Equivalent Standards

3 Coverall 1. BS EN 367: 1992


2. BS EN ISO 6942:2002
3. BS EN ISO 11612: 2008
4. NFPA 2112
5. OSHA 1910: 132
5. Equivalent Standards
Disposable coverall

4 Hand Gloves 1. BS EN 374-1/2/3:2003 - Chemical


2. AS/NZS 2161 - Occupational
Protective Gloves
3. BS EN 60903:2003 (ELECTRICAL)
4. Equivalent standards
5. Kong Ironclad Glove for Rigging &
Slinging, Roughneck,

6.EN 12477 type B,


EN 388
5 Hearing Protection 1. BS EN 458: 2004
2. BS EN 352-1:2002-Ear Muff
3. BS EN 352-2:2002-Ear Plug
4. ANSI S12.6-2008
5. Equivalent Standards

6 Safety Shoes
1. ANSI Z41-1991
2. BS EN ISO 20345:2004
3. BS EN ISO 20346:2004
4. Equivalent Standards

7 Personnel Fall Arrest 1. ANSI 10.32-2004


2. ANSI Z359.1-2007
3. BS EN 361 :2002
4. BS EN 362 :2004
5. BS EN 363: 2008
6. BS EN 354: 2002
7. BS EN 355: 2002
8. Equivalent standards

8 Self Retractable Fall 1. EN 360


Arrester
9 Respirators 1. BS EN 14387:2004+A1:2008, BS EN
143 :2000 — Air Purifying Respirator
2. BS EN 14593-1/2:2005,
BS EN 14594:2005,
BS EN 269:1995 — Air Line Respirator
3. BS EN 137:2006—SCBA
4. BS EN 1146:2005 - Escape Set
5. ANSI Z88.2 —1992
6. Equivalent standards

10 Welding Helmet and 1.EN


Face shield

2.CE EN166,
3. ANSI Z87 , CSA Z94.3.

11 Apron with leg sleeves


and Hand sleeves.
STANDARD CODE & SPECIFICATIONS FOR PPEs

Specifications
1. Must have side shields for lateral protection.
2. Eye protection for those wearing prescription lenses shall either have the prescription
incorporated into the eye protection or be large enough to be worn over the prescription
lenses without disturbing them.
3. Shall be of light weight.
4. Have style/frames to suit the wearer.
5. Those working continually on site shall have option of glasses with photo chromatic
properties to minimize glaring.
6. Tinted safety glasses must not be worn at night and in dark work places.
1. Metal hats are prohibited.
2. Helmet must include:
a) Flexible headband of adequate width and contoured both vertically and horizontally to fit
the forehead,
b) Absorbent sweatband that is easy to clean or replace,
c) Textile cradle straps,
d) Chin straps with fit around the ear, fitted with smooth, quick release buckles, which don't
dig into the skin, made from non-, irritant materials and can be stowed on helmet when not
in use.
e) Mass-400g (maximum),
f ) Marking- Trade mark of manufacturer, Size, ISI marking & Year of manufacture.
g) Test & Performance Requirements :
- Shock absorbtion resistance (against 3KG from a height of 1.5 m.),
- Penetration resistance (against a plumb of 500 g with conical steel point falling from a
height of 3 m,
- Electrical resistance against 2000V, 50 Hz for one minute,
- <5% water absorption when immersed in water for 24 hours at a temperature of 25C,
- Heat resistance in an oven at 93C-50C for 15 min,
- Sterilisation and corrosion resistance tests.
h) Size of circumference inside headband:
- Small (500-540 mm)
- Medium (540-590 mm)
- Large (590-640 mm)

1. Fire retardant material, pre-shrunk fabric,220 (Gramme Square Meter), 100% cotton,
2. Long sleeved,
3. Suitable for wear in hot and humid climate.
4. High grade reflective strip with 1 inch with EN-471 certified on sleeves, shoulders and
below knees.
5. Two way concealed vizlon zipper.
6. Elastic on waist for flexibility & comfort.
Tyvek - Dupont Provide light-weight inherent barrier protection against hazardous dry
particles and aerosols, and nonhazardous light liquid splash
Are good for industrial workers in a variety of applications including general
maintenance/operations, asbestos and lead abatement, mold remediation, and
environmental cleanups
Provide excellent abrasion resistance
Helps protect workers against small size hazardous particles

1. Kong Ironclad Glove for Rigging & Slinging Where practicable and depending on nature of
work, gloves shall be of designed specifically for oil & gas industry, reducing 3 biggest hand
related injuries :-
- Hairline fractures
- Bruisng blows
- Pinched fingers
2. The characteristics of the gloves shall include or be equivalent to:-
- Full hand and finger protection,
- Padded knuckle protection,
- Oil resistant palm,
- Raised PVC dots for improved grip,
- Flexible with a high degree of dexterity,
- Neoprene cuff,
- High visibility and machine washable.
1. Vendors of hearing protection should provide test data/certification that stated the
hearing protection Noise Reduction Rate (NRR) capability,
2. Vendors should also specify noise limit of their products beyond which, ear protection
becomes ineffective,
3. Vendors should provide instructions on proper use of their products,
4. In general ear plugs and ear muffs are used:
-For earplugs, field noise reduction is deemed to be about 25% of NRR
-Foam earplugs about 40% of NRR
-Ear muffs, it is about 60% of NRR
5. Disposable ear plug should preferably be polyurethane foam type,
6. Use of re-usable ear plug should preferably be semi-rigid plastic or rubber and must be
easily washed.

Safety shoes shall have:


1. Ankle high
2. Steel toe caps as per IS: 5852-1996
3. Steel mid-sole
4. Six eyelets or less in each of safety shoes,
5. Padded tongue
6. Eyelets be made of aluminium or brass coated steel of size.
7. Mass- 1750 g/pair of size 8 (maximum) with hob nails, toe tips and heel tips. 1650 g/pair
of size 8 (maximum) without hob nails, toe-tips and heel tips, The mass shall increase by
75g per pair for each bigger or smaller size respectively,
8. Be heat resistant (generally leather to provide protection against heat and sparks),
9. Treaded soles for slip resistant,
10. Soles that are resistant to oil and solvents.

1. Full body harness means a body support device consisting of connected straps designed
to distribute a fall arresting force over at least the thigh, shoulders and pelvis,with provision
for attaching a lanyard, lifeline or other components.
2. Fall arrest system consists of a full body harness, lanyard or lanyard and shock absorber.
The lanyard is connected to an anchorage point.
3. Accessories such as lanyards should be compatible with the safety harness.

The retractable-type fall arrester device CR a component of the personal protective


equipment against falls from a height.
Its used only with full body harness rated to fall arrest.
Snap hook connector, wire length 6m, 10m and 15 m.
1.Equipment selection should include:
-The hazard is intended for and its concentration
- The device chosen is certified for the function
- The device is performing the intended function
2. There are two classes of respirators:
-Air purifying, which uses filters or sorbents to remove harmful substances from the air
(negative pressure)
- Atmosphere supplying, which suppliesbreathable air from a clean air source (positive
pressure.)

1.Welding face shield


Designed to worn with vented Helmets ( Vista, Fusion & Ultravent)
2.Flip type front window with clear and DIN glass1.flip-up and ratchet type adjustment.
Large cover area for user’s forehead, providing full protection.

1.Protect yourself & your work-clothes from molten metal & flux with this big wrap-around
apron. It offers protection whenever you're welding, brazing, cutting or grinding metal. An
essential safety accessory.
SPECIFICATIONS FOR PPEs

Activity Item
General Purpose (Sun protection/ Dust
protection / Flying materials protection)

1.Safety Over glass


2.
Dark safety Glass

3. White safety glass


4.Day night Glass
General Purpose (Sun protection/ Dust
protection / Falling materials protection) 1.Safety Helmet with chin strap

General purpose ( Heat, Dust protection) 1.Fire Resistant overall with


reflectives strip
2. Overall with
Reflectives strip
Confined space/ painting/ Insulation works/ Stretchable, splash proof, light
Biologocal hazards / Chemical handling weight

Welding / Scaffolding/ General work / 1.Heavy Duty Gloves(scaffolding)


Chemical handling/ Grinding/ drilling/ 2.Leather Gloves
painting/ blasting 3. Chemical
Gloves
4.
ELECTRICAL HAND GLOVES
5. General Purpose Hand gloves.

6. Tig welding
gloves
1. Ear plug less than 85 DB.
2.Ear Muff More Than 85 DB.

General purpose 1. Safety shoe for staff

Working at height / Inside confined space 1.Harness with double lanyard

Roof top / Frgile roofs/ Where life line is not 1. Retractable-type fall arrester device
practically available
Dust / welding/ painting / Gas cutting 1.Normal Dust Mask
2. N95 MASK

3. FFP3 for
welders 3.
Cartridge mask

( Handling of chemical and


painting)

Welding / Grinding 1.HOT WORK


(Welding/grinding/cutting/gas
cutting/buffing)

Welding/ gas cutting 1.Hot Work (Welding/grinding/cutting/Gas


cutting
Photo graphs

You might also like