Scribd
Upload
215 views4 pages

F-PD-04 Feasibility Study

1. The document is a feasibility checklist for a potential new part considering manufacturing requirements and capabilities. 2. It reviews 16 criteria such as available machinery, materials, staffing needs, and inspection methods to determine if the part can be produced as specified. 3. The conclusion is that the project is either feasible as designed, feasible with recommended changes, or not feasible and requires engineering changes to the design.

Uploaded by

Trivesh Sharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
215 views4 pages

F-PD-04 Feasibility Study

1. The document is a feasibility checklist for a potential new part considering manufacturing requirements and capabilities. 2. It reviews 16 criteria such as available machinery, materials, staffing needs, and inspection methods to determine if the part can be produced as specified. 3. The conclusion is that the project is either feasible as designed, feasible with recommended changes, or not feasible and requires engineering changes to the design.

Uploaded by

Trivesh Sharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

EFF.DT:-01.09.2022 REV NO:-00 Doc NO.

: F/PD/04

shilka enterprises
FEASIBILITY STUDY CHECK LIST
Customer’s Name : Date:-

Part Name :

Part Number

R.M Grade/ Product Grade :

Passivation/Surface Finish :

R.M WT./PC :

Product Rate/PC :

Sl. No. Review Points Yes No Review Comments

1 Is the tool is supplied by the customer?


Is drawing (or) cad data available with the customer to
2
manufacturing the tool?
3 Is product adequately defined to enable feasibility evaluation?

4 Can engineering performance specifications be met as written?

Can product be manufactured to tolerances Specified on


5
drawing?

6 Is the drawing as per standard.

7 Is there any sample received from customer end

8 Is there any critical dimensions mentioned in the drawing

Is there adequate capacity to produce product and on which


9
machine ?

Is there adequate measurement instrument,gauge/fixture to


10
produce product?

Can the product be manufactured without incurring any


11
unusual?
12 a) Cost for capital equipment?

13 b) Cost for Tooling?

14 Do our machine is capable to produce the product


15 Is there any Customer Specific Requirement?

16 Tool dovelopment time required:

CONCLUSION :
Feasible Product can be produced as specified with no revisions.

Feasible Changes recommended (see attached).

Not Feasible Design revision required to produce product within the specified requirements.

CROSS FUNCTIONAL TEAM :


DEPARTMENTS : SIGNATURE :
Marketing ………………
Quality ………………
Plant Head ……
Production ………………
Purchase ………………
Tool Room ………………

Note : After completing the team feasibility if any changes recommended the same

will be communicates to customer by Marketing dept.


Doc NO. : F/PD/05
REV NO. :- 00

FEASIBILITY STUDY 01/01/2017


EFT. DATE :-

PAGE NO. : 01
of 01
Customer Name: Part Name :
Date: Part no. : Model Name:

FEASIBILITY CONSIDERATION : Our Product quality planning team has considered the following questions,
not intended to be all - inclusive in performing a feasibility evaluation. The drawing and /or specifications provided
have been used a basis for analyzing the ability to meet all specified requirements. All "NO" answers are supported
with attached comments identifying our concerns and/or Proposed changes to enable us to meet the specified
requirements.

S. No. CONSIDERATION Qty. Yes No

1 Number of Manpower required ?


Man
2 Does the manpower required any special skill / training ?

3 Is the availability of M/C adequate ?

4 Is the capacity of M/C adequate ?


Machine
5 Is the capablity of M/C adequate ?

6 Cpk≥1.33

6 Is the R.M. available in market / inhouse ?

7 Is the R.M. Grade available as specified in drawing ?

Material Is the tolerance specified in drawing is justified?

Special Characteristics if any?


If the R.M. Grade Not available as specified in drawing, in that case is
8
the Equivalent grade availabe ?
9 Is the existing method sufficient for producing the part ?
Method
10 Does any special method needs to be acquired for producing part ?

11 Measurement Does the measuring instruments available as per drawing ?


12 Management Is the project fruitful or Not ?

Project is feasible as specified with no revisions.


Project feasible as specified with recommended changes.
Final Recommended changes (if any) ...........…………………………………..
Conclusion ………………………….........................................................................

Project Not-feasible as ECN required to become feasible.


S.No. Name Designation Signature Remarks
1
2
3
4
5
6
Prepared By: Approved By:

You might also like