General Construction Notes:: at Support at Support at Support at Support at Landing at Support

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

12mmØ BENT UP BARS LANDING

BEAM 1 ROOF BEAM CANTILEVER BEAM STIFFENER BEAM TIE BEAM @ 300mm ON CENTER
250 200 200 150 200
GENERAL CONSTRUCTION NOTES:
IN THE INTERPRETATION OF THESE DRAWINGS, INDICATED DIMENSIONS SHALL GOVERN AND
DISTANCES OR SIZES SHALL NOT BE SCALED FOR CONSTRUCTION PURPOSES.
3-16mmØ TOP BARS 3-16mmØ TOP BARS 3-16mmØ TOP BARS 3-16mmØ TOP BARS 2-16mmØ TOP BARS LINTEL BEAM COMPACTED
L/4 TO ENGINEER'S DETAIL
400

400

400
300

350
2-12mmØ WEB BARS 2-12mmØ WEB BARS 2-16mmØ WEB BARS THE CONTRACTOR SHALL COORDINATE WITH THE AR, ME, EE AND OTHER UTILITIES AND EQUIPMENT
PLANS FOR THE EXACT SIZE, NUMBER AND LOCATIONS OF ALL SLEEVES OR OPENINGS THRU FLOOR

15
3-16mmØ BOTTOM BARS 2-16mmØ BOTTOM BARS 3-16mmØ BOTTOM BARS 2-16mmØ BOTTOM BARS 2-16mmØ BOTTOM BARS

0
SLABS, BEAMS AND WALLS AND ALSO BUILDING DIMENSIONS.

@ SUPPORT @ SUPPORT @ SUPPORT @ SUPPORT @ SUPPORT AT LANDING ALL REINFORCED CONCRETE WORK SHALL BE DONE IN ACCORDANCE WITH THE ACI-318-89 BUILDING
CODE, AND ALL STRUCTURAL STEEL WORK SHALL BE DONE IN ACCORDANCE WITH THE AISC
250 200 250 150 200 SPECIFICATIONS (LATEST EDITION) IN SO FAR AS THEY DO NOT CONFLICT WITH THE LOCAL BUILDING
CODE REQUIREMENTS.

ALL SLABS, BEAMS, GIRDERS AND OTHER STRUCTURAL ELEMENTS WHICH ARE NOT INDICATED,
3-16mmØ TOP BARS 2-16mmØ TOP BARS 3-16mmØ TOP BARS 2-16mmØ TOP BARS 2-16mmØ TOP BARS 12mmØ NOSING BARS
DETAILED, DESIGNATION OR INADVERTENTLY OMITTED BUT ARE NECESSARY TO BE COORDINATED
WITH ARCHITECTURAL AND OTHER ALLIED ENGINEERING PLANS AS WELL AS TO COMPLETE THE
400

400

400
300

350
2-12mmØ WEB BARS 2-12mmØ WEB BARS 2-16mmØ WEB BARS
STRUCTURAL WORKS IN ACCORDANCE WITH THE INTENT OF THE PLANS AND SPECIFICATION SHALL BE
3-16mmØ BOTTOM BARS 3-16mmØ BOTTOM BARS 3-16mmØ BOTTOM BARS 3-16mmØ BOTTOM BARS 2-16mmØ BOTTOM BARS
BROUGHT UP DURING PRE-BIDS/MEETINGS/NEGOTIATIONS. IT IS UNDERSTOOD THAT THE CONTRACTOR
12mmØ BENT UP BARS HAS PROVIDED AND INCLUDED ALL THESE ITEMS IN THEIR BID.
10mmØ BARS SPACED
@ MIDSPAN @ MIDSPAN @ MIDSPAN @ MIDSPAN @ MIDSPAN @ 300mm ON CENTER
SPACED @ 300mm O.C
250
NOTES ON CONCRETE MIXES AND PLACING
12mmØ BARS SPACED
@ 150mm ON CENTER UNLESS OTHERWISE INDICATED IN PLANS OR NOTED IN THE SPECIFICATIONS, THE MIMIMUM 28-DAYS
CYLINDER COMPRESSIVE STRENGTH OF CONCRETE F'C, SHALL BE AS FOLLOWS:

200
10mmØ RSB SPACED @
5-50mm.,5-100mm., L/ FFL
4 1.1 FOUNDATION 21.0 MPa (3000 psi)
L/4 5-150mm., AND L/4
REST @ 200mm OC 1.2 COLUMNS 21.0 MPa (3000 psi)
1.3 FLOOR SLABS, BEAMS & GIRDERS 21.0 MPa (3000 psi)
1.4 PARAPET WALLS & OTHER STRUCTURAL ELEMENTS 21.0 MPa (3000 psi)

VARIES
1.5 PARTITION, CURTAIN WALLS, BEDDED SLABS, SIDEWALK
2-10mmØ HORIZONTAL ,
CURB, GUTTER & OTHER STRUCTURAL ELEMENTS 17.0 MPa (2500 psi)
VERTICAL BARS SPACED @
1.6 LEAN CONCRETE 10.0 MPa (1500 psi)
300mm ON CENTER

L/5 SECTION L/5 3-10mmØ BARS WITH 10mmØ


CONCRETE SHALL BE DEPOSITED IN ITS POSITION WITHOUT SEGREGATION, RE-HANDLING OR FLOWING.
PLACING SHALL BE DONE PREFERABLY WITH BUGGIES, BUCKET OR WHEEL BARROWS.
TIES SPACED @ 300mm O.C
NO CHUTES WILL BE ALLOWED EXCEPT TO TRANSFER CONCRETE FROM HOPPERS TO BUGGIES, WHEEL

250
BARROWS OR BUCKET, IN WHICH CASE THEY SHALL NOT EXCEED SIX THOUSAND (6000mm) IN
AGGREGATE LENGTH.
AT GROUND FLOOR 500
NO DEPOSITING OF CONCRETE SHALL BE ALLOWED WITHOUT THE USE OF VIBRATORS UNLESS
AUTHORIZED IN WRITING BY THE STRUCTURAL ENGINEER AND ONLY FOR UNUSUAL CONDITIONS
WHERE VIBRATION IS EXTREMELY DIFFICULT TO ACCOMPLISH.

1 SCHEDULE OF BEAMS & DETAIL NOT TO SCALE: 2 STAIR DETAIL NOT TO SCALE:

MINIMUM SPLICE LENGTH OF STEEL BARS

TYPES OF REINFORCEMENT MINIMUM SPLICE LENGTH

TENSION BARS 25 + BAR SIZE +150mm

COMPRESSION BARS 20 + BAR SIZE + 160mm


SHORT

L/4 L/4

MILD STEEL MINIMUM HOOK AND BEND ALLOWANCE

3D 3D
L/4

2D 4D 2D

4D
4D D
L/4

D
Ldb Ldb

L/2
LONG

MILD STEEL MINIMUM HOOK AND BEND ALLOWANCE

L/4
4D 4D
3D 3D
4D

4D
L/4

6D

D
Ldb Ldb

3 SLAB REINFORCEMENT DETAILS (S-1) NOT TO SCALE: 5 SLAB REINFORCEMENT DETAILS (S-2) NOT TO SCALE: 6 STRUCTURAL GENERAL NOTES NOT TO SCALE:

DESIGNED BY: PRC. REG. No. : PROJECT TITLE: APPROVED BY: REVISION/S: SHEET CONTENT: SHEET No.

TIN : SCHEDULE OF BEAMS & DETAIL


STAIR DETAIL
PTR. No. : TWO STOREY RESIDENTIAL MR. NOEL MAGBITANG SLAB REINFORCEMENT DETAIL
STRUCTURAL GENERAL NOTES
S
CIVIL ENGINEER ISSUED ON : 2
OWNER
ISSUED AT : LOCATION: UGAC NORTE, TUGUEGARAO CITY, CAGAYAN SCALE: As Shown

You might also like