Scribd
Upload
58 views2 pages

ESB 255051815 SpecSheet

Atom Arc 8018-CM electrodes are low-alloy electrodes used for welding steels with 0.5-1.25% chromium and 0.5% molybdenum, commonly used in power generation and pipelines. The electrodes have 1.3% chromium and 0.57% molybdenum and are classified under AWS A5.5 as type E8018-B2H4R. They are intended for shielded metal arc welding and produce weld deposits with good strength and toughness properties.

Uploaded by

anupmenon menon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
58 views2 pages

ESB 255051815 SpecSheet

Atom Arc 8018-CM electrodes are low-alloy electrodes used for welding steels with 0.5-1.25% chromium and 0.5% molybdenum, commonly used in power generation and pipelines. The electrodes have 1.3% chromium and 0.57% molybdenum and are classified under AWS A5.5 as type E8018-B2H4R. They are intended for shielded metal arc welding and produce weld deposits with good strength and toughness properties.

Uploaded by

anupmenon menon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ATOM ARC LOW HYDROGEN LOW ALLOY ELECTRODES

ATOM ARC 8018-CM AWS A5.5: E8018-B2H4R

FEATURES TYPICAL MECHANICAL PROPERTIES


Atom Arc 8018-CM electrodes contain 1.25% Stress Relieved 8 hrs @ 1150°F (620°C)
Cr and 0.50% Mo as alloy addition. They are Yield Strength 88 ksi, 607 MPa
used for the welding of such steels as 0.5% Tensile Strength 102 ksi, 704 MPa
Cr - 0.5% Mo, 1% Cr - 0.5% Mo, and 1.25% Cr
- 0.5% Mo, which are used principally in power Elongation% in 2” 24%
piping and boiler work for the fabrication of Stress Relieved 1 hr @ 1275°F (690°C)
plates, pipes, tubes, castings, and forgings.
Yield Strength 84 ksi, 580 MPa
Tensile Strength 97 ksi, 669 MPa
Elongation% in 2” 25%
CLASSIFICATIONS AND APPROVALS Stress Relieved 8 hrs @ 1275°F (690°C)
ƒƒ AWS A5.5: E8018-B2H4R Yield Strength 82 ksi, 566 MPa
ƒƒ MILITARY-MIL-E-22200/8; MIL-8018-B2
Tensile Strength 96 ksi, 662 MPa
ƒƒ A.B.S.- AWS A5.5: E8018-B2
ƒƒ ASME SFA 5.5 Elongation% in 2” 26%
Stress Relieved 1 hr @ 1300°F (705°C)
Yield Strength 90 ksi, 621 MPa
WELDING PROCESS Tensile Strength 93 ksi, 642 MPa
ƒƒ SMAW (Stick) Elongation% in 2” 25%

INDUSTRIES
ƒƒ Power Generation CHARPY V-NOTCH PROPERTIES
ƒƒ Pipeline
Testing Temperature @ 30°F (0°C)
ƒƒ Pressure Vessels
Stress Relieved 8 hrs. @ 1125°F (607°C)
80 ft-lb, 108 J
WELD METAL ANALYSIS Testing Temperature @ 30°F (0°C)
C 0.06% Stress Relieved 8 hrs. @ 1150°F (620°C)
Mn 0.8% 83 ft-lb, 113 J
Si 0.5% Testing Temperature @ 30°F (0°C)
P 0.011% Stress Relieved 8 hrs. @ 1250°F (677°C)
S 0.008% 98 ft-lb, 133 J
Cr 1.3%
Mo 0.57%
X-Factor < 15

ESAB Welding & Cutting Products / esabna.com / 1.800.ESAB.123 CEP-10033-B


ATOM ARC LOW HYDROGEN LOW ALLOY ELECTRODES

ATOM ARC 8018-CM


DEPOSITION TABLE
Diameter Optimal Current Current Range Deposition Rate Efficiency
in (mm) Amps Amps lb/hr (kg/hr) %
3/32 (2.4) 90 70 - 100 1.7 (0.8) 66.3
1/8 (3.2) 120 90 - 160 2.6 (1.2) 71.6
140 90 - 160 2.7 (1.2) 70.9
5/32 (4.0) 140 130 - 220 3.1 (1.1) 75
170 130 - 220 3.8 (1.7) 73.5
3/16 (4.8) 200 200 - 300 4.9 (2.2) 76.4
250 200 - 300 5.4 (2.4) 74.6
7/32 (5.6) 250 250 - 350 6.5 (2.9) 75
300 250 - 350 7.2 (3.3) 74
1/4 (6.4) 300 300 - 400 7.7 (3.5) 78
350 300 - 400 8.7 (3.9) 77

PART NUMBER / PRODUCT INFORMATION


Part Number Description
255053324 AA 8018-CM 3/32X14X10#HS
255053316 AA 8018-CM 3/32X14X50#HS
255051823 AA 8018-CM 1/8X14X10#HS
255051815 AA 8018-CM 1/8X14X50#HS
255055311 AA 8018-CM 5/32X14X50#HS
255053118 AA 8018-CM 3/16X14X50#HS

ESAB Welding & Cutting Products / esabna.com / 1.800.ESAB.123 CEP-10033-B

You might also like