NEWLON6

MODEL N P - 7 A PORTABLE FILLED BAG CLOSING MACHINE

CNP-7H1

INSTRUCTION MANUAL/PARTS LIST

NEWLONG MACHINE WORKS, LTD.

No.14
From the library of: Superior Sewing Machine & Supply LLC
 CONTENTS

1. SPECIFICATIONS 2

2. PREPARATION FOR START 3

1. Oiling 3

2. Needle Setting 3

3. Threading 3

3. START 4

4. ADJUSTMENTS 5

1. Thread Tension 5

2. Position of Needle and Looper 5

3. Position of Feed Dog 5

4. Pressure of Presser Foot 5

5. REPLACING PARTS 6

6. MAINTENANCE & LUBRICATION 7

7. LUBRICATOR 7

1. Operation 7

2. Maintenance 7

3. Troubleshooting 8

8. ORDERING PARTS 9

NUMERICAL INDEX OF PARTS 26

DIAGRAM OF SCREW. NUT & WASHER 28

- 1 -

From the library of: Superior Sewing Machine & Supply LLC
1. SPECIFICATIONS

TECHNICAL DETAILS

Speed (sec/bag) 5—6

Seam Single Thread Chain Stitch
Stitch Range (mm.) , 7.2 (fixed)
Revolution (rpm.) 1,600±125
Needle DNx1-#25
Thread (vinylon, synthetic or cotton) 20/6
Drive Motor 60W
Power Supply 110, 220 or 240V., A.C.
12V, 24V., D.C. (specify one.)
50—6OH2, Single Phase
Net Weight (kg) 5.2 Including Thread Cone, Shoulder Belt.
Machine Dimension (mm.) 360(L) x 245(W) x 315(H)
Packing Dimension (eft.) 2.5

STANDARD ACCESSORIES

1. Needles DN X 1-# 25 5 pcs.

2. Thread Vinylon 20/6 1 roll
3. Screw Driver 1 pee.
4. Needle Bar Spanner 1 pee.
5. Oil 1 can
6. Carbon brush 2 pcs.

- 2 -

From the library of: Superior Sewing Machine & Supply LLC
 2. PREPARATION FOR START

1. Oiling (Fig. 1)
Oiling is imperative to keep the machine in good operating
condition. Fill oil in the reservoir (capacity 45 cc). To
feed oil, push the button of the lubricator. One push
feeds 0.08 cc of oil, which would normally service for
several hours of operation. Do not run the machine
out of oil, otherwise it will break down.

2. Needle Setting (Fig. 2, 3,4)

Turn the pulley until Needle Bar reaches its highest
position. Loosen Needle Bar Clamping Nut, and set
Fig-i y
Needle in the Bar as deep as it will go.
Be sure to set a Needle with its concave part facing
correctly toward the Looper. Fbc Clamping Nut tightly,
otherwise Needle may come loose during operation and
break. Tighten

3. Threading (Fig. 5)
The machine is delivered being threaded to show you
proper threading of the machine, which is shown in
Fig. 5, for identification. Follow the guide numbers
1 to 6 of Fig. 5.
Loosen

® Thread Eyelet d) Needle Bar

(D Thread Tension Eyelet (6) Thread Eyelet
(3) Tension Disc (7) Needle
@ Thread Eyelet

Clannp Nut
\ Scarf

(D

Fig. 4 J

From the library of: Superior Sewing Machine & Supply LLC
 3. START

Before starting, make sure that the supply voltage accords Run the machine while keeping the bag straight. Never
with the specification of the motor. pull or pull back the bag.
Hold the machine in your right hand and place your After closing, the thread is cut by the built-in nibbler
index finger on the switch button on the handle. (Fig. 6) type cutter.
Hold the bag in your left hand lightly and insert the bag When cutting the thread, leave at least 3 cm long extended
mouth betweenFeed Dog and Presser Foot. (Fig. 7) tail to prevent the unwilling loosening of the seam.(Fig. 9)

Throat Plate

I®

Presser Foot

Fig. 6 J

Switch button

Thread Cutter Knives

Fig. 9 J

Run the machine with empty bags and make sure you
are well versed in its operation before entering into
actual operation.

- 4 -

From the library of: Superior Sewing Machine & Supply LLC
 4. ADJUSTMENTS

1. Thread Tension
Thread tension is adjustable by turning the Thread
Needle
Tension Nut.
Turn the Nut clockwise for tighter tension and counter
clockwise for looser.
Looper

2. Position of Needle and Looper (Fig. 10)

Looper must pass the concave part of Needle with
clearance of 0.1 mm as shown in Fig. 10. Adjustment
of the clearance can be done after loosening the screw
of Looper Rocker.

Screw

Looper Rocker

Fig. 10 y
3. Position of Feed Dog
Feed Dog should be 2.5 mm above throat plate at its
highest position as shown in Fig. 11. The height of Feed
Feed Dog Support Screw, (1S3/16-32 x 9)
Dog is determined by the height of Feed Dog Support (SM3/16x32x9L)
Screws(4 pcs. in all).

4. Pressure of Presser Foot

When to adjust the pressure of Presser Foot, take out Feed Dog
Needle Bar Guard and loosen Screw of Presser Bar 2.5mm (244111)
Throat Plate
Connection. Move up Presser Bar to increase the pressure
(244122)
and down to decrease. After the adjustment, tighten the
Screw firmly.

Feed Dog Stopper Screw

(3/16S32034)

Fig. 11 J

- 5 -

From the library of: Superior Sewing Machine & Supply LLC
 5. REPLACING PARTS

For replacement or adjustment of Ball Rod, refer to

Fig. 12.
Take out Screw (T) and disconnect Rod End (2) from
Needle Bar Lever . After loosening the Nut 0 , 9.4mm

adjust the clearance between Connecting Rod 0 and

Rod End (5) , so that Needle Bar moves in the center
of the clearance between the upper and lower Presser Bar
Bushings. (Needle Bar stroke is 37 mm).
To fix Eccentric Cam 0 on Main Shaft (8), tighten
the Screws (9) and on Main Shaft (8) (Eccentric (D
Cam 0 should contact Spacer (0) slightly.).
The position of Needle is adjusted so that the distance (D
between the point of Needle (at its highest position)
and Throat Plate is 13 mm, after loosening screw on
Needle Bar Connection Assembly 0 in Fig. 12.
® Screw 11/64S40089
(D Rod End 6APOS8
(D Needle Bar Lever 242051A
® Nut 1N8
(5) Connecting Rod Assembly 242011A
(D Needle Bar ConnectionAssembly 242101A Fig. 12 J
(7) Eccentric Cam (part of Connecting Rod Assembly) 242011
(D Main Shaft 241101
CD®' Screw 11/64S40001
O Spacer 241161

Adjust Looper Drive Cam 0 when neccessary as

(D
U (0)
follows: (Refer to Fig. 13.).
a) Apply the Screws 0 and Qfon the taper of (D
Main Shaft 0 .
b) Adjust Arm (B) 0 , so that Looper Drive Cam (D
0 and Arm (A) 0 move smoothly. After
adjusting, fix the Screw 0 tightly. (D
c) The clearance between Looper Drive Cam 0 and (D
Arm 0 is effected by Spring 0 . Loosen Screw
0 and turn Spring Supporter 0 to adjust the m-
CD
pressure of Spring 0 . After adjusting, tighten
the Screw 0 to fasten Spring Supporter 0 .
(D Main Shaft 241101
® (D" Screw 15/64S28524
® Looper Drive Cam 243012
® Looper Rocker Shaft Arm (B) 243081 Fig. 13 J
® Looper Rocker Shaft Arm (A) 243071
® Screw for Looper RockerShaft Arm (B) 11/64S40009
©Spring 243131
® Spring Supporter 243121
® Screw for Spring Supporter Block 9/64S40035
® Spring Supporter Block 243111

- 6 -

From the library of: Superior Sewing Machine & Supply LLC
 6. MAINTENANCE & LUBRICATION

Clean the machine at the end of the day's work. Wipe Recommended lubricants are Shell X-100, Motor. Oil
dust and other foreign matter off the Feed Dog teeth lOW/30, Shell Vitria Oil 31 or the equivalent. For
Looper and Throat Plate evelets where they are easily operation and maintenance of the lubricator, refer to
gathered. Section 7.
Care should be taken to keep the machine free from rust,
especially when to leave it unused for some time.

Important I

When adjusting the machine or replacing parts, always disconnect the Electric Cord from the power source.
This is important in view of safety to the operator and adjuster.

7. LUBRICATOR

1. Operation 2. Maintenance
The lubricator comprises a pump and a reservoir. The 1. Keep off dust or foreign matter when to fill oil (They
reservoir holds max 45 cc of oil. (Effective oil volume may cause jamming of the piston arid the check valve).
is 28 cc.) 2. Rate of discharge is fixed and not adjustable (0.08 cc
To operate the lubricator: per push).
1. First unscrew the reservoir cap by half a turn. * 3. At high temperatures, grease may run along points .
2. Push the button to its lowest position (stroke: 12mm). This is normal, grease being used when the lubricator
3. When released, the button will automatically return was assembled in our plant.
to its original position. 4. Reservoir is made of high density polyethylene. Keep
4. Lastly, tighten the cap to prevent oil leak during off fire and refrain from using organic, benzene, or
operation. xylene chemicals for cleaning.
Check periodically for correct working of the pump.
* Repeated working on the button without first loosening (Repeat oil feed and look at the oil through the
the cap may produce negative pressure in the reservoir, and discharge pipe.)
the dust in the atmosphere may be easily introduced in it
when the cap is loosened.

7 -

From the library of: Superior Sewing Machine & Supply LLC
3. Troubleshooting

Trouble Cause Remedy

Oil not fed. Low oil level. FiU oil.

Full stroke movement not Dust attached on the interior Replace lubricator.
obtainable. wall of the pumping chamber.

Button will not return. Dust accumulated, or break of Replace lubricator.

spring.

Oil leak from (S) Wornout or displaced seal of Replace lubricator.

0-Ring.

Oil leak from (§) Wornout or displaced seal of Replace lubricator.

packing.

Oil leak from © Loose plug. Tighten plug or Replace

lubricator.

PUSH BUTTON LUBRICATOR Model; NP-7A

air vent

push button

stroke

packing

pump body

spring

piston

reservo r

pumping chamber

check valve

PISTON STROKE: 12 mm
RESERVOIR CAPACITY: 45 cc
EFFECTIVE OIL VOLUME: 28 cc
DISCHARGE RATE: 0.08 cc per push discharge nozzle

- 8 -

From the library of: Superior Sewing Machine & Supply LLC
 8. ORDERING PARTS

The parts list showing all the parts used in the machine is included in this book.
Check the list, and specify parts numbers and quantities required clearly.
Send your order to the nearest agent, distributor or one of our branch offices.

1. Description of each part and its stamp number is described in this parts list.
Screws and nuts for parts are shown adjacent to the relevant parts. When ordering parts, describe
clearly stamp number with its name of part.

2. The parts which have no Ref. Number can not be delivered independently; always order it as an
assembly.

3. A set of assembled parts is represented by the stamp number of its main parts.

4. The last figure in the parts stamp number advances on each improvement of the parts.

5. Part No. described in [ ] of Remarks means old part No.

* The part list is subject to change without prior notice.

CONTENTS

(1) THREAD TENSION AND COVER PARTS 10

(2) BUSHINGS, OILINGS AND HANDLE PARTS 12
(3) NEEDLE BAR,PRESSER BAR AND DRIVING PARTS 14
(4) LOOPER DRIVING PARTS 16
(5) FEED DRIVING AND THREAD CUTTER PARTS 18
(6) MOTOR PARTS (For Totally Enclosed TypeMotor) 20
(7) SPECIAL PARTS FOR NP-7H TYPE 22
(8) CREPE TAPE BINDING AND CUTTER PARTS (Special Order Parts) 24
NUMERICAL INDEX OF PARTS 26

- 9 -

From the library of: Superior Sewing Machine & Supply LLC
(1) THREAD TENSION AND COVER PARTS

27 28 29

-10-

From the library of: Superior Sewing Machine & Supply LLC
 (1) THREAD TENSION AND COVER PARTS

Ref.No. Part No. Description Q'ty Remarks

1 245042 Thread Stand 1

2 15/64S28028 Screw, for 245042 2

3 1N6 Nut 2

4 3W6 Spring Washer 1

5 2W6 Washer 1

6 KOlOOl Thread
7 245052 Thread Cone Clamping Rod 1

8 245201 Thread Cone Clamping Nut 1

9 245013 Top Cover 1

10 9/64S40043 Screw, for 245013

11 245261 Thread Eyelet 1

12 11/64S40005 Screw, for 245261 1

13 245071 Thread Tension Eyelet 1

14 245081A Thread Tension Assembly 1 (15-19)

15 245081 Tension Post 1

16 065261 Tension Disc

17 245101 Tension Spring 1

18 245091 Tension Nut

19 9/64S40011 Screw, for 245081A 1

20 245033 Needle Bar Guard 1

21 11/64S40005 Screw, for 245033 1

22 9/64S40065 Screw, for 245033

23 245222 Looper Cover 1

24 9/64S40065 Screw, for 245222

25 245022 Side Plate 1

26 9/64S40005 Screw, for 245022

27 245481 Gasket 1

28 245302 Inside Cover 1

29 9/64S40005 Screw, for 245302 4

30 245181 Thread Cone Cover (1) Special Order

-11-

From the library of: Superior Sewing Machine & Supply LLC
(2)BUSHINGS,01 LINGS AND HANDLE PARTS

16 13 15

-12-

From the library of: Superior Sewing Machine & Supply LLC
 (2) BUSHINGS, 01 LINGS AND HANDLE PARTS
Ref.No. Part No. Description Q'ty Remarks

1 241024AS Handle Assembly (2-11)

2 241024A Handle Assembly (3,4)
3 241024 Handle (4)
4 9/64S40011 8crew, for 241024A
5 245132 Micro 8witch Cover
6 C02001 Micro 8witch (Z-15GK655-B)
C02006 Micro 8witch (X-IOGD-B) for DC motor
7 C05008 FlexibleTerminalBlock(ML-8K-1,4?)
8 D03003 Oiler (9,10)
9 8FU2-6x90F Oil Tube, with oil felt
10 8FU2-6x60F Oil Tube, with oil felt
11 685x15 8crew, for D03003
12 15/64828021 8crew, for 241024A
13 241122 Main8haft Bushing,rear
14 9/64840502 8crew,for241122
15 065401 Rubber Bushing
16 D07021 Joint (BN-5-6) (17)
17 E03014 Washer
18 245471 Joint
19 1N4 Nut
20 245461 Oil Pipe
21 242212 Bushing for PresserBar & NeedleBar, upper
22 9/64840502 8crew, for 242212
23 242222 Presser Bar Bushing, lower
24 205131 Oil Felt
25 241111 Main 8haft Bushing, rear
26 9/64840502 8crew, for 241 111
27 243021 Looper Rocker 8haft Bushing
28 245162 Oil Felt
29 245271 Hanger
30 241151 Hook ) -8pecial Order
31 1/8840006 8crew, for 241151 (2)
32 245171 8houlder Belt ^
33 EW-6.5 8pring Balancer
34 241024BS Handle Assembly (Safety type with pulley cover) (2-11)
35 241024B Handle Assembly (Safety type with pulley cover) (3,4)

-13-

From the library of: Superior Sewing Machine & Supply LLC
 m

Ref.No. Part No. Descnption Q ty Remarks

241092 Synchro Pulley

3/16S28001 Screw, for 241092
241131 Retaining Collar
11/64S40502 Screw, for 241131
241161 Spacer
205131 Oil Felt
241101 Main Shaft
242011A Connecting Rod Assembly (9-14)
242011 Connecting Rod Sub-Assembly (10,11)
3/16S28029 Screw, for connecting rod cap
11/64S40001 Screw, for eccentric cam
1N8 Nut, for 242011A

From the library of: Superior Sewing Machine & Supply LLC
 (3) NEEDLE BAR, PRESSER BAR AND DRIVING PARTS

Ref.No. Part No. Description Q'ty Remarks

13 5W8 Washer, for 242011A (A-8-S) 1

14 6A04001 Rod End (POS-8) 1
15 11/64S40089 Screw, for 242031 1
16 11/64W15103 Washer, for 242031 1
17 245211 Oil Felt 1
18 242041 Spring 1

19 242031 Rod End Stud 1

20 245491 Cap 2
21 5/8N18101 Nut, for 242081 2
22 242081 Adjusting Stud 2
23 245231 GUFelt 2
24 242071 Needle Bar Lever Stud
25 242051A Needle Bar Lever Assembly 1 (26)
26 11/64S40004 Screw, for 242051A
27 245371 Oil Felt 1
28 242101A Needle Bar Connection Assembly 1 (29,30)
29 205171 Oil Felt 1
30 11/64S40003 Screw, for 242101A 1
31 242121A Needle Bar with Nut 1 (32)
32 242131 Needle Clamp Nut 1

33 B01002 Needle (DNxl #25) 1

34 242171 Presser Foot Lifter Base

35 11/64S40002 Screw, for 242171 1
36 11/64S40007 Screw, for 242171
37 242201 Presser Bar 1
38 242181 Presser Bar Connection 1 (39)
39 11/64S40003 Screw, for 242181 1
40 242191 Presser Spring 1
41 242231A Presser Foot Assembly 1 (42-44)
42 9/64S40055 Screw 1
43 9/64N40101 Nut 1
44 11/64S40005 Screw, for 242231A, 242233A 1

45 242233A Presser Foot Assembly (for Net Bag) (1) (42-44)

46 242161 Presser Foot Lifter (1) p Special Order
47 242271 Collar (1) •
For Presser
48 31LP6 "0" Ring (1) •
Bar Lifter
49 11/64W15103 Washer (1) -

50 11/64S40009 Screw, for 242161 (1) -

51 9/64S40001 Screw, for Lifter Stopper (1)

52 241091 Synchro Pulley (1) (2) for NP-7 Type

-15-

From the library of: Superior Sewing Machine & Supply LLC
(4) LOOPER DRIVING PARTS

17

-16-

From the library of: Superior Sewing Machine & Supply LLC
 (4) LOOPER DRIVING PARTS
Ref.No, Part No. Description Q'ty Remarks

4-1 243111 Spring Supporter Block (2)

2 9/64S40035 Screw, for 243111
3 9/64S40005 Screw, for 243111
4 243121 Spring Supporter
5 243131 Spring
6 243071 Looper Rocker Shaft Arm (A) (7)
7 11/64S40002 Screw, for 243071
8 243041 Roller
9 243061 Roller Stud Screw
10 11/64N40201 Nut, for 243061
11 243081 Looper Rocker Shaft Arm (B) (12)
12 11/64S40009 Screw, for 243081
13 243092 Looper Rocker (14)
14 11/64S40089 Screw, for 243092
15 243102 Looper
16 9/64S40001 Screw, for 243102
17 243032 Looper Rocker Shaft
18 243012 Looper Drive Cam (19)
19 15/64S28524 Screw, for 243012
20 205131 Oil Felt

-17-

From the library of: Superior Sewing Machine & Supply LLC
(5) FEED DRIVING AND THREAD CUTTER PARTS

31 ^ 30

-18-

From the library of: Superior Sewing Machine & Supply LLC
 (5) FEED DRIVING AND THREAD CUTTER PARTS

Ref.No. Part No. Description Q'ty Remarks

5-1 244011A Feed Dog Carrier Block Assembly 1 (2,3)

2 183/16-32x9 Feed Dog 8upport 8crew (8M3/16x32x9) 4
3 245391 Oa felt 1
4 244102 81ide Block Guide 8tud 1
5 9/64S40011 8crew, for 244102 2
6 246011 Knife Bracket Extension 1
7 3/16S32031 8crew, for 246011 2
8 244111 Feed Dog 1

9 3/16S32034 8crew, for 244111 1

10 244081 81ide Block Adjusting 1

11 3/16S32025 Lock Bolt, for 244091 2

12 11/64W15103 Washer, for 244091 2

13 244091 8tud 8Ude Block Adjusting 8upport 2

14 3/8N24201 . Lock Nut, for 244091 2

15 244122 Throat Plate 1
16 9/64S40043 8crew, for 244122 3
17 246081 BaU 1

18 lB3xl2 Bolt, for 246081 (M3x0.5xl2 2) 1

19 1N3 Nut, for 246081 (M3x0.5) 1

20 1W3 Washer, for 246081 (M3) 1

21 11/64840049 8crew, for 246021 1

22 11/64W15103 Washer, for 246021 1

23 246021 Kiufe Bracket 1

24 246032 Knife Bracket Pin 1

25 246042 Bushing, for 246032 1

26 246051 Knife Tension 8pring 1
27 9/64840502 8crew, for 246042 1

28 246061 Knife Moving 1

29 1/8840003 8crew, for 246061

30 246071 Knife 8tationary 1
31 1/8840003 8crev/, for 246071
32 3W3 8pring Lock Washer (M3) 1

-19-

From the library of: Superior Sewing Machine & Supply LLC
 I

11,25

From the library of: Superior Sewing Machine & Supply LLC
 (6) MOTOR, PARTS (For Totally Enclosed Type Motor)
Ref.No Part No. Description Q'ty Remarks

C04001 Cabtyer Cord, with Plug (Standard Type)

C04003 Cabtyer Cord, with Plug (American Type)
C04004 Cabtyer Cord, with Plug (British TVpe)
C04005 Cabtyer Cord, with Plug (German Type)
C04006 Cabtyer Cord, with Plug (French Type)
C04007 Cabtyer Cord, with Plug (Australian Type)
C04009 Cabtyer Cord, with Plug (for DC Motor)
211151 Rubber Bushing(for C04003-C04007)
FOlOOl Timing Belt
241083 Motor Pulley (5)
11/64S40504 Screw, for 241083
COlOlO UniversalMotor (1 lOV) (7,9,10)
COlOll Universal Motor (220V) (7,9,10)
C01012 Universal Motor (240V) (7,9,10)
C01013 UniversalMotor (24V) (8~10)
C01014 UniversalMotor (12V) (8-10)
7 C08004 Carbon Brush, for AC Motor (size 6x 8x 15) 2
8 C08005 Carbon Brush, for DC Motor (size 6x 8x 15) 2
9 C07003 Cap 2
10 4S3x6-W Screw (with washer) 2
11 241073 Motor Base B 1
12 15/64S28021 Screw, for 241073 4
13 11/64S40075 Screw, for Motor 4
14 11/64W10101 Washer, for Motor 4
15 C08001 Carbon Brush, for AC Motor (size 5x 8x 14) (2) -r for Old Part
16 C08003 Carbon Brush, for DC Motor (size 5x 8x 14) (2)
17 C07001 Cap (2)
18 245321 Connector B (1)
19 245501 Nut (1)
20 245361 Cord Cover (1)
21 241062 Motor Base A (1)
22 FC103238 Screw, for 241062 (4)
23 Motor Pulley (for Old type) (1) (5)
24 F01002 Timing Belt (for Old type) (1) for NP-7 Type
25 241072 Motor Base B (1)

-21-

From the library of: Superior Sewing Machine & Supply LLC
From the library of: Superior Sewing Machine & Supply LLC
 (7) SPECIAL PARTS FOR NP-7H TYPE

Ref.No Part No. Description Q'ty Remarks

7-1 241024 Handle 1 (2)

2 9/64S40011 Screw 2
3 241212 Pulley Cover 1
4 9/64S40004 Screw, for 241053 2
5 9/64S40052 Screw, for 241053 1
6 241242 Pulley Cover Holder A 1
7 15/64S28004 Screw, for 241242 2
8 241231 Pulley Cover Holder B 1
9 9/64S40005 Screw, for 241231 1
10 241223 Handle Base 1
11 15/64S28032 Screw, for 241253 2
12 241253 Handle Base Holder 1
13 D07021 Joint (BN-5-6) 2 (14)
14 E03014 Washer 4
15 D07021 Joint (BN-5-6) 2 (14)
16 8FU2-6x95F Oil Tube (06x95 fi), with oil felt 2
17 8FU2-6x70F Oil Tube (06x70 £), with oil felt
18 D07022 Joint
19 D07023 Compression Sleeve
20 D07024 Compression Bushing
21 8FN24xl35F OilTube (06x 135 fi), with oil felt
22 245462 Oil Pipe
23 D07009 Tube CUp (PC4-1)
24 9/64S40005 Screw, for D07009

•23-

From the library of: Superior Sewing Machine & Supply LLC
(8) CREPE TAPE BINDING AND CUTTER PARTS (Special Order Parts)

11,37

13,38

17,39

-24-

From the library of: Superior Sewing Machine & Supply LLC
 (8) CREPE TAPE BINDING AND CUTTER PARTS (Special Order Parts)
Ref.No. Part No. Description Q'ty Remarks

8-1 247071 Crepe Tape Bracket 1

2 247091 Crepe Tape Hanger Stud 1
3 9/64S40035 Screw, for 247071
4 1N6 Nut, for 247091 (M6) 1

5 2W6 Washer, for 247091 (M6) 1

6 247081 Crepe Tape Supporter 1

7 11/64S40015 Screw, for 247071 1

8 1/4W03205 Spring Washer, for 247071 1

9 1/4W15105 Washer, for 247071 1

10 11/64N40203 Nut, for 247071 1

11 244132 Throat Plate 1

12 9/64S40043 Screw, for 244132 3

13 247051 Holder, for crepe tape binder 1
14 9/64S40043 Screw, for 247051 2
15 9/64N40101 Nut, for 247051 2
16 2W4 Washer, for 247051 (M4) 2
17 247061 Crepe Tape binder 1
18 9/64S40054 Screw, for 247061 2
19 2W4 Washer, for 247061 (M4) 2
20 247031 Cutter Lever 1
21 11/64S40046 Screw, for 247011 2

22 11/64W10101 Washer, for 247011 2

23 247041 Screw, for 247031 1
24 15/64N28206 Nut, for 247021 2
25 3W6 Spring Lock Washer, for 247021, (M6) 2
26 2W6 Washer, for 247021, (M6) 2
27 11/64S40029 Stopper Screw, for 247011 1
28 3/16S32026 Stopper Screw, for 247031 1
29 247021 Hinge Pin 1
30 247011 Knife, Moving 1

31 247001 Knife, Stationary 1

32 1/8S40003 Screw, for 247001

33 183261 Spring Hook 1

34 247073 Crepe Tape Bracket (1) p for Crepe

35 247092 Crepe Tape Hanger Stud (1) - Tape width
36 247082 Crepe Tape Supporter (1) -
70 mm
37 244133 Throat Plate (1) •

38 247052 Holder, for crepe tape binder (1) -

39 247063 Crepe tape Binder (1) -

40 242261A Presser Foot Assembly (1)

-25-

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL INDEX OF PARTS

PART NO. PAGE PART NO. PAGE PART NO. PAGE

065261 11-16 242212 13-21 245271 13-29

065401 13-15 242222 13-23 245302 11-28
183261 25-33 242231A 15-41 245321 21-18
205131 13-24 14-6 242233A 15-45 245361 21-20
17-20 242261A 25-40 245371 15-27
205171 15-29
242271 1547 2453^1 19-3
211151 21-2 243012 17-18 245461 13-20
243021 13-27 245462 23-22
241024 13-3 23-1 243032 17-17 245471 13-18
241024A 13-2 243041 17-8 245481 11-27
241024AS 13-1
243061 17-9 245491 15-20
241024B 13-35 243071 17-8 245501 21-19
241024BS 13-34 243081 17-11 246011 19-6
241062 21-21 243092 17-13 246021 19-23
241072 21-25 243102 17-15 246032 19-24
241073 21-11
243111 17-1 246042 19-25
241082 21-23 243121 174 246051 19-26
241083 21-4 243131 17-5 246061 19-28
241091 15-52 244011A 19-1 246071 19-30
241092 14-1 244081 19-10 246081 19-17
241101 14-7
244091 19-13 247001 25-31
241111 13-25 244102 194 247011 25-30
241122 13-13 244111 19-8 247021 25-29
241131 14-3 244122 19-15 247031 25-20
241151 13-30 244132 25-11 247041 25-23
241161 14-5
244133 25-37 247051 25-13
241212 23-3 245013 11-9 247052 25-38
241223 23-10 245022 11-25 247061 25-17
241231 23-8 245033 11-20 247063 25-39
241242 23-6 245042 11-1 247071 25-1
241253 23-12
245052 11-7 247073 25-34
242011 14-9 245071 11-13 247081 25-6
242011A 14-8 245081A 11-14 247082 25-36
242031 15-19 245081 11-15 247091 25-2
242041 15-18 245091 11-18 247092 25-35
242051A 15-25
245101 11-17
242071 15-24 245132 13-5
242081 15-22 245162 13-28
242101A 15-28 245171 13-32
242121A 15-31 245181 11-30
242131 15-32
245201 11-8
242161 1546 245211 15-17
242171 15-34 245222 11-23
242181 15-38 245231 15-23
242191 1540 245261 11-11
242201 15-37

-26-

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL INDEX OF PARTS

PART NO. PAGE PART NO. PAGE PART NO. PAGE

OTHER ITEMS SCREW 15/64828524 17-19

lB3xl2 19-18
6A04001 15-14 1/8S40003 19-29 19-31 183/16-32x9 19-2
B01002 15-33 25-32 483x6-W 21-10
COlOlO 21-6 1/8S40006 13-31 FC103238 21-22
3/16S28001 14-2
COlOll 21-6 685x15 13-11
C01012 21-6 3/16S28029 14-10
C01013 21-6 3/16S32025 19-11
C01014 21-6 3/16S32026 25-28
C02001 13-6 3/16S32031 19-7
3/16S32034 19-9 NUT
C02006 13-6
C04001 21-1 9/64S40001 15-51 17-16 IN3 19-19
C04003 21-1 9/64S40004 234 1N4 13-19
C04004 21-1 9/64S40005 11-26 11-29 1N6 11-3 254
C04005 21-1 17-3 23-9
23-24 1N8 14-12
C04006 21-1 9/64S40011 11-19 134 3/8N24201 19-14
C04007 21-1 19-5 23-2 5/8N18101 15-21
C04009 21-1 9/64S40035 17-2 25-3 9/64N40101 1543 25-15
C05008 13-7 11/64N40201 17-10
C07001 21-17 9/64S40043 11-10 19-16
25-12 25-14 11/64N40203 25-10
C07003 21-9 9/64S40052 23-5 15/64N28206 25-24
C08001 21-15 9/64S40054 25-18
C08003 21-16 9/64S40055 1542
C08004 21-7 9/64S40065 11-22 11-24
C08005 21-8
9/64S40502 13-14 13-22 WASHER
D03003 13-8 13-26 19-27
D07009 23-23 11/64S40001 14-11 1W3 19-20
D07021 13-16 11/64S40002 15-35 17-7 2W4 25-16 25-19
23-13 23-15 11/64S40003 15-30 15-39 2W6 11-5 25-5
D07022 23-18 11/64S40004 15-26 25-26
D07023 23-19 3W3 19-32
11/64S40005 11-12 11-21 3W6 114 25-25
D07024 23-20 1544 5W8 15-13
FOlOOl 21-3 11/64S40007 15-36 1/4W03205 25-8
F01002 21-24 11/64S4C009 15-50 17-12
KOlOOl 11-6 11/64S40015 25-7
8FN24xl35F 23-21 11/64S40029 25-27 1/4W15105 25-9
11/64W10101 21-14 25-22
8FU2-6x60F 13-10 11/64S40046 25-21 11/64W15103 15-16 1549
8FU2-6x70F 23-17 11/64840049 19-21 19-12 19-22
8FU2-6x90F 13-9 11/64840075 21-13
8FU2-6X95F 23-16 11/64840089 15-15 17-14 E03014 13-17 23-14
EW-6.5 13-33 11/64840502 144

31LP6 1548 11/64840504 21-5

15/64828004 23-7
15/64828021 13-12 21-12
15/64828028 11-2
15/64828032 23-11

-27-

From the library of: Superior Sewing Machine & Supply LLC
 SCREW. NUT & WASHER
NP-7A i-'y h, 9'yv-V- FULL SIZE (IS-^)

9/64840502 11/64840502 11/64340504 15/64828524 1/8840006 9/64840001 9/64840004 9/64840052 9/64840054

9/64840011 9/64840065 9/64840005 9/64840035 11/64840029 11/64840001 11/64840002 11/64840009

11/64840046 11/64840003 11/64840004 11/64840005 3/16832031 15/64828004 15/64828021 15/64828032

1/8840003 9/64840043 11/64840007 15/64828028 11/64840015 3/16828001 3/16832026 3/16828029 3/16832034

9/64840055 11/64840049 11/64840075 11/64840089 3/16832025 183x12 183/16-32x9 483x6-W FC103238 685x15

9/64N40101 11/64N40201 11/64N40203 15/64N28206 3/8N24201 5/8N18101 1N3 1N4 1N6 1N8

11/64W10101 11/64W15103 1/4W03205 1/4W15105 1W3 2W4 2W6 3W3 3W6 5W8 E03014

From the library of: Superior Sewing Machine & Supply LLC
 : m Si5 ^ m E ^ ± 6-4-14 TEL03-3843-73ll(H3 Ai Jlj ^ HI m 7k Oj 5 Ife 4 T i TELOl66-47-3267
'110 TLX 265-5306 T078-02 FAXO 166 - 48 - 1654
FAX 03-3843-9998 H ^ 5?lrfi:;*:?llfBa?S?Bai23 TEL0I77-66-269I
t030 FAXO 177-66-7082
I - 14-14 IEL03-3843-0269
iff M ^ jg m tit Oj ai I -109-5 TEL025-275-I45I
III TLX265-53C6 T950 FAX025-273-8488
FAX03-3843-0260
SI5 UJ |i?UjrfTM:^3-3-7 TEL0249-34-3I77
X963 FAX0249-32-7076
m ^ ^ ^ ^ rti HI ffl fflj 280 - 3 TEL0282-23-398I
X328-0I FAX0282-23-3809
W W m M il 2 - 17 - 2 IE LO134-62-2691 (ffi
T047-02 FAXO134-62-2682
m a 1 TEL0299-36-4612
X3I4-02 FAX0299-96-7359
i\h ^ flll^m^^^ESl-S3 -14-10 TEL022-286-5I89 .1 P.li^feMl^^Bl:^$±)gi;k490-l TEL0270-65-0883
t982 FAX022-286-8230 t370- 11 FAX0270 - 65 - 0889
« 4 - 3 - 17 TEL03-3629-269l(Ha M: 1? TEL0268-64-269I
TI20 FAX03-3629-2695 =f389-03 FAX0268-64-26I9
m m m M JK s - 1 2 - 2 m I -10-30 TEL0775-53-269I
TEL0472-63-I542
t280 X520-30 FAX0775-53-7846
FAX0472-66-6546
a a m PI PE :1b fill 9 - 2 TEL0794-47-2570
^j^mtSmETcl- I -17-3 TEL045-584-269l(ft) X676-0I FAX0794-47-2807
t230 FAX045-584-9450 'J^ ?|5 lJjPm:^?:>iei§^;^J^3640- I TEL0839-89-269I
X754 FAX0839-89-4999
>9 tK ;t5 tk m 5 0 3 TEL0543-64-269l(ft)
t424 I - II - 10 TEL0992-68-3235
FAX0543-65-2533
T89I-0I FAX0992-67-6023
«SMr!)4'JIIEW^BII3- 5 TEL052-35l-269l(ft)
T454 FAX052-363-369I

S Oj ®UjmTMgl-l-36 TEL0764-4I -2690 ^ 4 - 8 - 14 TEL03-3603-225l(m

t93I FAX0764-3I -2691 TI25 FAX03-3603-9648
+ 9 - I TEL047I -33-2691
± B5 :'^B5m7iJiE±Fj3 2 - I - 8 TEL 06-462-435lira
t553 FAX 06-465-5926
=f277 FAX047I -33-2695
m I5| 1S:t^lT«i5ag|?SI5|fflI0l5|4254 TEL0282-62-320l«t)
IS) UJ 1844-5 TEL0862-77-6527 X349-I3 FAX0282-62-5400
T703 FAX0862-77-6528
TELO186-49-5201
tS til 15tllrtT>I^EBj 1460-4 TEL0877-46-3659(fia T0I8-57 FAXO 186-49-0759
T762 FAX0877-46-3662 ± m ±>im4'4TBT 1322 TEL0298-4l-0805(f«
m & /Aam4'Ei?iA0j7-28 TEL082-293-269l(ft) t300 FAX0298-42-9I05
X733 FAX082-295-65I6 a if TEL0262-45-7223
=f382 4 0 1 1-6 FAX0262-48-0847
7i 151 7i!S9m?fiMSl??0fHBlT/Jt487 TEL092-962-4006(ft)
T8II-0I FAX092-963-0249

NEWLONG MACHINE WORKS. LTD.

Head Office 14-14, Matsugaya 1-chome, Taito-ku, Tokyo 111, Japan
Cable Address : NEWLONG TOKYO. Fax : (03)3843-0269
Telex : 265-5306 NLTOK J, FAX : (03)3843-0260

Osaka Branch 1—8, Obiraki 2-chome, Fukushima-ku, Osaka 553, Japan

Cable Address : NEWLONG OSAKA, Tel : (06)466-3530
Fax : (06)465-5926

Newlong Taiwan Machine Co.. Ltd. 3rd Fl., 29, Lane 100, Song Chiang Road, Taipei,Taiwan, R. O. China
Cable Address ; NEWLONG TAIPEI. Tel : (02)5716524, 5642692
FAX : 886-2-5221420

Newlong Machine Philippines, Inc. 3590 Davila Street. Makati. Metro Manila. Philippines
Cable Address : NEWLONG MANILA
Tel : 8160207. 851266
Fax : 8163977

Newlong Singapore Pte. Ltd. N0.68, Kian Teck Road. Jurong Town. Singapore 2262
Cable Address : NLMACHINE SINGAPORE. Tel : 265-0901. 261 -2126
Telex : 23649 NLSIN. RS Fax : 65-265-1994

Newlong Do Brasil Maquinas Rua. Francisco Tapaj6s. 409/415. Jardim da Saude, Sao Paulo. Brasil
Industrials Ltda. Cable Address : NEWLONG SAOPAULO, Tel : 276-9744
Telex : (11)57453 NEWL. BR Fax : 276-9084

American-Newlong. Inc. 5310 South Harding Street. Indianapolis, Indiana 46217 U.S.A.
Tel : (317)787-9421
Telex : TWX 810-341-3313 AMLONG IND. Fax : (317)786-5225

Newlong Holland B.V. Snipweg 3, 1118 A A. Schiphol Zuid, Holland.

Tel : (020)603-7217 Telex : 18896 NLN NL
Fax : (020)6484-593

Newlong Malaysia Sdn Bhd 77 Jalan SS20/11, Damansara Kim, 47400 Petaling Jaya, Selangor, Malaysia
Tel : 7188323. 7188401 Telex : 37868 NLMAS MA
Fax : 7176000

Newlong Thailand Ltd. 1415 Sukhumvit Road. Between Soi 63-65

Prakanong. Bangkok 10110. Thailand
Tel : (02)391-1171.8870.
Telex : 21137 NLTHAI TH, Fax : (02)391-5508

Newlong (Hong Kong) Co.. Ltd. Room 9C Lockhart Centre 301 -307A
Lockhart Road. Wanchai. Hong Kong
Tel : 573-1855 Telex : 62847 HKMTL HX

From the library of: Superior Sewing Machine & Supply LLC
t3^(T,Y,A) Fax : 572-1786
 HA

14-14 MATSUGAYA 1-CHOME, TAITO-KU TOKYO, JAPAN TEL: (3843) 0269

No.14
NO.IE3007H 92-03-1000F
PRINTED IN JAPAN
1985, 1991 NEWLONG MACHINE WORKS, LTD.
From the library of: Superior Sewing Machine & Supply LLC