Project No.

4789824261 File E520440 Page 1

LABORATORY DATA PACKAGE Date

CLIENT INFORMATION
Company Name SmartBond Chemicals Pvt Ltd
Address 92A, shiv Vihar , opp Vishwakarma industrial area road no. 5, Murlipura
Jaipur, Rajasthan, 302013
India

AUDIT INFORMATION:
Description of Tests Per Standard UL 94 Edition 6th June 27, 2020
No. CSA C22.2 /Revisi 2nd Oct 2000 (R 2018)
No.0.17-00 on Date
[] Tests Conducted by +
Printed Name Signature
[]UL Staff witnessing
testing (WTDP only)
[]Authorized Signatory Printed name Signature, and include date for
(CTDP, TPTDP, TCP) CTDP, TPTDP, TCP
Reviewed and accepted
by qualified Project
Handler
Printed Name Signature

TESTS TO BE CONDUCTED:
Test [] Comments/Parameters
No. Done Test Name [x]Tests Conducted by ++
1 X HORIZONTAL BURNING TEST; HB MADDUX CHEN 2021-03-15

Tests conducted in accordance with UL 94 that were considered representative

of the same tests required by CSA C22.2 No. 0.17.00 are identified with dual
paragraph/clause references in the title of each test on the individual
datasheets. Where test names differ or additional test were conducted in
accordance with CSA C22.2 No. 0.17.00, they are identified by the standard
and paragraph/clause information enclosed by parenthesis.

Test Equipment- See "TEST EQUIPMENT INFORMATION"

Samples – See "TEST SAMPLE IDENTIFICATION"

00-AM-F0028 24.0(Legacy number ULS-00746-QMFZ2-DataSheet-2001) Form Issued: 1991-01-01

Form Page 1 Form Revised:
Form Copyright  2014 UL LLC
Only those products bearing the UL Mark should be considered as being covered by UL.
Project No. 4789824261 File E520440 Page 2
LABORATORY DATA PACKAGE Date

Instructions -
+ - When all tests are conducted by one person, printed name and signature
can be inserted here instead of including printed name and signature on each
page containing data. Must indicate number of pages in the data package.

++ - When test conducted by more than one person, printed name and signature
of person conducting the test can be inserted next to the test name instead
of including printed name and signature on each page containing data. Must
indicate number of pages in the data package.

00-AM-F0028 24.0(Legacy number ULS-00746-QMFZ2-DataSheet-2001) Form Issued: 1991-01-01

Form Page 2 Form Revised:
Form Copyright  2014 UL LLC
Only those products bearing the UL Mark should be considered as being covered by UL.
Project No. 4789824261 File E520440 Page 3
LABORATORY DATA PACKAGE Date

Special Instructions -

[X] Unless specified otherwise in the individual Methods, the tests shall be
conducted under the following ambient conditions. Confirmation of these
conditions shall be recorded at the time the test is conducted.

Ambient Relative Barometric

Temperature, C 25 ± 10 Humidity, % < 75 Pressure, mBar N/A

[ ] No general environmental conditions are specified in the Standard(s)or

have been identified that could affect the test results or measurements.

RISK ANALYSIS RELATED TO TESTING PERFORMANCE:

The following types of risks have been identified. Take necessary

precautions. This list is not all inclusive.
[ ] Electric shock [ ] Radiation
[ ] Energy related hazards [ ] Chemical hazards
[ ] Fire [ ] Noise
[ ] Heat related hazards [ ] Vibration
[ ] Mechanical [ ] Other (Specify)__

Note to Lab:

Please refer the below mentioned LPGs as applicable, before conducting the
test

00-LO-L0909- LPG for Measuring Sample thickness

00-LO-L0895- LPG for CTI Test

00-LO-L0884- LPG for UL94 50W and 500 W Vertical Burning Test Flame
Confirmation Procedure

00-LO-L0891- LPG for Vertical Flammability Materials Testing in UL94

00-LO-L0924- LPG For Glow wire series (GWEPT, GWFI, GWIT) of Tests in IEC
60695-2-10, -11, -12, and -13

00-LO-W0860- Work Instruction for IEC 60695-2-10 Glow Wire Apparatus

Verification

00-CA-S0027- Plastics Project Handling Global Guidelines (PPHiGG)

@： Dimension and thickness measured by： MATT WU 2021-03-11
Condition by：MATT WU 2021-03-11

00-AM-F0028 24.0(Legacy number ULS-00746-QMFZ2-DataSheet-2001) Form Issued: 1991-01-01

Form Page 3 Form Revised:
Form Copyright  2014 UL LLC
Only those products bearing the UL Mark should be considered as being covered by UL.
Project No. 4789824261 File E520440 Page 4
LABORATORY DATA PACKAGE Date

TEST LOCATION:
[X]UL or Affiliate []WTDP []CTDP []OTHER
Company Name Underwriters Laboratories Taiwan Co., LtdUL
Address 1st Fl, 260 Da-Yeh Road, Peitou, Taipei City, Taiwan 112

TEST EQUIPMENT INFORMATION

Test Number +, Test

Inst. Instrume Title or Function Last Cal.
ID No. nt Type Conditioning /Range Date Next Cal. Date

+ - If Test Number is used, the Test Number must be identified on the data
sheet pages or on the Data Sheet Package cover page.

The following additional information is required when using client’s or

rented equipment, or when a UL ID Number for an instrument number is not
used. The Inst. ID No. below corresponds to the Inst. ID No. above.

Inst.
ID No. Make/Model/Serial Number/Asset No.

Completion of Meter – Test instrument information on the following pages is

optional. Recording of Meter – Test instrument information on this page is
still required.

00-AM-F0028 24.0(Legacy number ULS-00746-QMFZ2-DataSheet-2001) Form Issued: 1991-01-01

Form Page 4 Form Revised:
Form Copyright  2014 UL LLC
Only those products bearing the UL Mark should be considered as being covered by UL.
Project No. 4789824261 File E520440 Page 5
LABORATORY DATA PACKAGE Date

[X]Test equipment information is recorded on UL’s Laboratory Project

Management (LPM)/Laboratory Equipment Management (LEM) database. (This
statement may be selected only if datasheets are completed electronically at
a UL facility)

00-AM-F0028 24.0(Legacy number ULS-00746-QMFZ2-DataSheet-2001) Form Issued: 1991-01-01

Form Page 5 Form Revised:
Form Copyright  2014 UL LLC
Only those products bearing the UL Mark should be considered as being covered by UL.
Project No. 4789824261 File E520440 Page 6
LABORATORY DATA PACKAGE Date

TEST SAMPLE IDENTIFICATION

The table below is provided to provide correlation of sample numbers to

specific product related information. Refer to this table when a test
identifies a test sample by "Sample No." only.

Sample Date Test Sample Manufacturer, Product Identification and

Card No. Received No. No. Ratings
3668429 , 1 - Smart bond chemicals, SL-1000 IN
3668430

+ - If the Test Number is used, then the Test Number or Numbers the sample
was used in must be identified on the data sheet pages or on the Data Sheet
Package cover page.

[] Sampling Procedure –

00-AM-F0028 24.0(Legacy number ULS-00746-QMFZ2-DataSheet-2001) Form Issued: 1991-01-01

Form Page 6 Form Revised:
Form Copyright  2014 UL LLC
Only those products bearing the UL Mark should be considered as being covered by UL.
 Project No. 4789824261 File E520440 Page 7
LABORATORY DATA PACKAGE Date

SAMPLE CONDITIONING LOG UL 94, §6

CSA C22.2 No.0.17-00,
§4.2.1.3.3, 4.2.2.2.2,
4.2.3.2.2, 4.2.5.2.3
UL746C, §57, 58

Conditioning/ Set In Out

Exposure No. Date/Time Technician Date/Time Technician
[x] As received
See
> 48h at 2021-03- See Individual
1,2 MATT WU Individual
23 ± 2°C, 11 17:00
Datasheet
Datasheet
50 ± 5% RH
[] Air oven aging
168 ± 2h at
70 ± 2°C
Desiccator
See
> 4h at Individual See Individual
23 ± 2°C, Datasheet Datasheet
<20% RH
[x] Cotton See
Condition> 24 Individual See Individual
1,2
hr, < 30 min Datasheet Datasheet

Chamber setting(s) [was] [were] monitored to ensure that the setting(s) [was]
[were] stable throughout the test time frame. Any deviations from the
setting(s) are noted below.

Date Time period of deviation Setting(s) Chamber

M.W
2021-03-11

00-AM-F0028 24.0(Legacy number ULS-00746-QMFZ2-DataSheet-2001) Form Issued: 1991-01-01

Form Page 7 Form Revised:
Form Copyright  2014 UL LLC
Only those products bearing the UL Mark should be considered as being covered by UL.
Project No. 4789824261 File E520440 Page 8
LABORATORY DATA PACKAGE Date

HORIZONTAL BURNING TEST; HB UL 94, §7

CSA C22.2 No.0.17-00, §4.2.3
(ASTM D635, IEC 60695-11-10)
Radius < 1.3 mm, Width = 13.0±0.5 mm, Length = 125±5 mm and edges
Specimen Review: [x]
are smooth.
Preparation of Test Flame:
Gas Flow Rate: 105 mL/min (105±5 mL/min)
Back Pressure: 1 mm water (<10 mm water)
[X] Test flame is blue (yellow tip just removed), Height = 20±1 mm

Burning
Specimen Thickness Damaged Rate Flame
No. mm Time, t (s) Length, L (mm) X1 (mm/min) Class
HB
Set #: 1 Material: SL-1000 IN (1.9 mm) Color: WT
Test Date: 2021-03-15 09:00 [X] Yes
1 1.904 0 0 ( 2 ) -
2 1.991 0 0 ( 2 ) -
3 1.975 0 0 ( 2 ) -
HB
Set #: 2 Material: SL-1000 IN (3.2 mm) Color: WT
Test Date: 2021-03-15 09:10 [X] Yes
1 3.428 0 0 ( 2 ) -
2 3.370 0 0 ( 2 ) -
3 3.435 0 0 ( 2 )

Set #: HB
Material: Color:
Test Date: [ ] Yes
1 ( )
2 ( )
3 ( )
HB
Set #: Material: Color:
Test Date: [ ] Yes
1 ( )
2 ( )
3 ( )

Note: Damaged Length (L) equals distance beyond 25 mm reference mark M.C
Linear Burning Rate = 60L/t (Not calculated if 25 mm mark not passed) 2021-03-15
Observation (X1):
(1) Ceased to burn before the 100 mm reference mark. Specimen is HB
(2) Ceased to burn before the 25 mm reference mark. Specimen is HB
(3) Misc:
Lab Ambient: 21 °C (25±10°C) and 64 %RH (< 75% RH)

00-AM-F0028 24.0(Legacy number ULS-00746-QMFZ2-DataSheet-2001) Form Issued: 1991-01-01

Form Page 8 Form Revised:
Form Copyright  2014 UL LLC
Only those products bearing the UL Mark should be considered as being covered by UL.
Project No. 4789824261 File E520440 Page 9
LABORATORY DATA PACKAGE Date

END OF DATASHEET PACKAGE. THIS PAGE INTENTIONALLY LEFT BLANK

00-AM-F0028 24.0(Legacy number ULS-00746-QMFZ2-DataSheet-2001) Form Issued: 1991-01-01

Form Page 9 Form Revised:
Form Copyright  2014 UL LLC
Only those products bearing the UL Mark should be considered as being covered by UL.