Scribd
Upload
39 views2 pages

Alignment Form 3

This shaft alignment report details measurements taken before and after aligning pump P-212. Key measurements include an angular misalignment of 0.12/0.2 degrees and 0.06/0 offset misalignment before adjustment, which were reduced to near 0 after adjustment. Distances A, B, and C were also reported along with adjustment values and the machine's running speed of 2975 RPM.

Uploaded by

Ajwad Haziq
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
39 views2 pages

Alignment Form 3

This shaft alignment report details measurements taken before and after aligning pump P-212. Key measurements include an angular misalignment of 0.12/0.2 degrees and 0.06/0 offset misalignment before adjustment, which were reduced to near 0 after adjustment. Distances A, B, and C were also reported along with adjustment values and the machine's running speed of 2975 RPM.

Uploaded by

Ajwad Haziq
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

SHAFT ALIGNMENT REPORT

MACHINE TO BE ALIGNED : PUMP P-212 (LP TRANSFER PUMP)

DISTANCE DATA : A 65mm


B 45mm
C 40mm

BEFORE AFTER
MEASUREMENT ITEM
VERTICAL HORIZONTAL VERTICAL HORIZONTAL
ANGULAR MISALIGNMENT 0.12 0.2 0 -0.03
OFFSET MISALIGNMENT 0.06 0 0.04 0
ADJUSTMENT FRONT -0.42 -0.54 -0.01 -0.04
ADJUSTMENT REAR -0.83 -1.22 -0.03 -0.06

MACHINE RUNNING SPEED : 2975 RPM

You might also like