Syllabus

SCHEME & SYLLABUS
for
B.TECH. COURSE
in
Electronics Engineering
(w.e.f. Session 2020-21)
DEPARTMENT OF ELECTRONICS ENGINEERING
J.C. BOSE UNIVERSITY OF SCIENCE AND

TECHNOLOGY, YMCA, FARIDABAD
1
J.C.BOSE UNIVERSITY OF SCIENCE & TECHNOLOGY,
YMCA, FARIDABAD
VISION
J.C. Bose University of Science and Technology, YMCA Faridabad, aspires to be a

nationally and internationally acclaimed leader in technical and higher education in
all spheres which transforms the life of students through integration of teaching,
research and character building.
MISSION
 To contribute to the development of science and technology by synthesizing
teaching, research and creative activities.
 To provide an enviable research environment and state-of-the-art technological
exposure to its scholars.
 To develop human potential to its fullest extent and make them emerge as world
class leaders in their professions and enthuse them towards their social
responsibilities.
2
Department of Electronics Engineering
VISION
To be a Centre of Excellence for producing high quality engineers and scientists

capable of providing sustainable solutions to complex problems and promoting cost
effective indigenous technology in the area of Electronics, Communication &
Control Engineering for Industry, Research Organizations, Academia and all sections
of society.
MISSION
 To frame a well-balanced curriculum with an emphasis on basic theoretical

knowledge as well the requirements of the industry.
 To motivate students to develop innovative solutions to the existing problems for

betterment of the society.
 Collaboration with the industry, research establishments and other academic

institutions to bolster the research and development activities.
 To provide infrastructure and financial support for culmination of novel ideas into
useful prototypes.
 To promote research in emerging and interdisciplinary areas and act as a facilitator

for knowledge generation and dissemination through Research, Institute - Industry
and Institute-Institute interaction.
3
About Electronics Engineering Department
J.C. Bose University of Science & Technology, YMCA Faridabad established in 2009, formerly known as YMCA
University of Science & Technology (erstwhile YMCA Institute of Engineering, Faridabad), established in year
1969 as a Joint Venture of Govt. of Haryana and National Council of YMCA of India with active assistance from
overseas agencies of West Germany to produce highly practical oriented personnel in specialized field of
engineering to meet specific technical manpower requirement of industries. The Electronics Engineering
Department started in 1969 and has been conducting B.Tech. Courses in Electronics Instrumentation and
Control (EIC) started in 1997, Electronics and Communication Engineering (ECE) started in 1997, Electronics and
Computer Engineering (ENC) started in 2019 and Electronics Engineering started in 2021 of 4-Years duration.
Students are admitted through centralized counselling nominated by State Government in 1st Year and 2nd
year through lateral entry entrance test. Besides under graduate degree courses, it is also running M.Tech in
VLSI Design and M.Tech in Electronics & Communication Engineering. Department of Electronics Engineering is
also running Ph.D. Programme. All courses are duly approved by AICTE/ UGC. The Electronics Engineering
Department has been well known for its track record of employment of the pass out students since its
inception. The Department has good infrastructure consisting of 11 laboratories, 10 Lecture Halls and 1
Conference Room beside 6 workshops. It has excellent faculty with 05 Professors, 01 Associate Professors and
23 Assistant Professors. At present, 8 faculty members are pursuing PhD in various specializations. The various
syllabi of UG/PG courses have been prepared with active participation from Industry. The Department is
organizing number of expert lectures from industry experts for students in every semester. Seven month
training is mandatory for every B.Tech student. Emphasis has been given on project work and workshop for
skill enhancement of students. Choice based credit system allows students to study the subjects of his/her
choice from a number of elective courses /audit courses.
4
PROGRAM EDUCATIONAL OBJECTIVES (PEOS)
1. To prepare students to excel in undergraduate programmes and succeed in industry/

technical profession through global, rigorous education.
2. To provide students with a solid foundation in mathematical, scientific and

engineering fundamentals required to solve engineering problems and also to pursue
higher studies.
3. To provide students with foundation in skill development required to design, develop

and fabricate engineering products.
4. To inculcate in students professional and ethical attitude, effective communication

skills, teamwork skills, multidisciplinary approach, and an ability to relate engineering
issues to broader social context, additional courses with regard to physical,
psychological and career growth.
5. To provide student with an academic environment aware of excellence, outstanding

leadership, written ethical codes and guidelines with moral values, and the life-long
learning needed for successful professional career.
5
PROGRAMME OUTCOMES (POs)
Engineering Graduates will be able to:
1) Engineering knowledge: Apply knowledge of mathematics, science, engineering
fundamentals, and Electronics Engineering to the solution of engineering problems.
2) Problem analysis: Identify, formulate, review literature and analyze Electronics
Engineering problems to design, conduct experiments, analyze data and interpret data.
3) Design /development of solutions: Design solution for Electronics Engineering
problems and design system component of processes that meet the desired needs with
appropriate consideration for the public health and safety, and the cultural, societal and the
environmental considerations.
4) Conduct investigations of complex problems: Use research based knowledge and
research methods including design of experiments, analysis and interpretation of data, and
synthesis of the information to provide valid conclusions in Electronics Engineering.
5) Modern tool usage: Create, select, and apply appropriate techniques, resources,
and modern engineering and IT tools including prediction and modeling to Electronics
Engineering activities with an understanding of the limitations.
6) The engineer and society: Apply reasoning informed by the contextual knowledge
to assess societal, health, safety, legal and cultural issues and the consequent
responsibilities relevant to mechanical engineering practice.
7) Environment and sustainability: Understand the impact of the Electronics
Engineering solutions in societal and environmental contexts, and demonstrate the
knowledge and need for sustainable development.
8) Ethics: Apply ethical principles and commit to professional ethics and
responsibilities and norms of the Electronics Engineering practice.
9) Individual and team work: Function affectively as an individual, and as a
member or leader in diverse teams, and in multidisciplinary settings in Electronics
Engineering.
10) Communication: Communicate effectively on complex engineering activities
with the engineering committee and with society at large, such as, being able to
comprehend and write affective reports and design documentation, make effective
presentations in Electronics Engineering.
11) Project Management and finance: Demonstrate knowledge & understanding of
the mechanical engineering principles and management principles and apply these to
one‟s own work, as a member and leader in a team, to manage projects and in
multidisciplinary environments in Electronics Engineering.
12) Life - long learning: Recognize the need for, and the preparation and ability to
engage in independent research and lifelong learning in the broadest contest of
technological changes in Electronics Engineering.
PROGRAMME SPECIFIC OUTCOMES (PSOs)

PSO 1. To apply the fundamental and design concepts of Science & Engineering in the
areas of Analog & Digital Electronics, Instrumentation, Control, Communication,
Signal Processing, Embedded Systems and Internet of Things (IoT).
(Professional Skill)
PSO 2. To pursue higher degree or get placed in Industries & Organizations after
qualifying competitive examinations at National & Global Level.
(Competitive Skill)
6
GRADING SCHEME
Marks % Grade Grade points Category
90-100 O 10 Outstanding
80 ≤ marks <90 A+ 9 Excellent
70 ≤ marks < 80 A 8 Very good
60 ≤ marks < 70 B+ 7 Good
50 ≤ marks < 60 B 6 Above average
45 ≤ marks < 50 C 5 Average
40 ≤ marks < 45 P 4 Pass
<40 F 0 Fail
Ab 0 Absent
Percentage calculation= CGPA * 9.5
SEMESTER WISE (1st and 2nd ) SUMMARY OF THE PROGRAMME: B.TECH. (EE-IoT)
No. of Contact
S.No. Semester Marks Credits
Hours
1 I 26 600 18.5
2 II 25 650 19.5
3 MOOCs - - 12*
Total 51 1250
Note:
1. The scheme will be applicable from Academic Session 2020-21
onwards.
2. *It is mandatory to pass the MOOC course(s) by all the students
as per implementation of credit transfer/ mobility policy of on line
courses of the University-as mentioned in Annexure-A at the end
of the syllabus.
7
Chapter -1
General, Course structure & Theme

&
Semester-wise credit distribution
A. Definition of Credit:
1 Hr. Lecture (L) per week 1 credit

1 Hr. Tutorial (T) per week 1 credit
1 Hr. Practical (P) per week 0.5 credits
2 Hours Practical (Lab)/week 1 credit
B. Course code and definition:
Course code Definitions

L Lecture
T Tutorial
P Practical
BSC Basic Science Courses
ESC Engineering Science Courses
HSMC Humanities and Social Sciences including
Management courses
PCC Professional core courses
PEC Professional Elective courses
OEC Open Elective courses
LC Laboratory course
MC Mandatory courses
PROJ Project
C. Category of Courses:
BASIC SCIENCE COURSES

Sl. Course Course Title Hours per week Credits
No. Code
L T P
1 Physics 3 1 3 5.5
2 Chemistry 3 1 3 5.5
3 Mathematics –I 3 1 0 4
4 Mathematics –2 3 1 0 4
8
ENGINEERING SCIENCE COURSES
No. Code
L T P
1 ESC 101(Th)/ Basic Electrical Engineering 3 1 2 5
ESC107(Lab)
2 ESC 102 Engineering Graphics & Design 0 0 4 2
3 ESC103(Th)/ Programming for Problem Solving 3 0 4 5
ESC105(Lab)
4 ESC 104 Workshop I 0 0 4 2
5 ES6 106 Workshop II 0 0 4 2
HUMANITIES & SOCIAL SCIENCES INCLUDING MANAGEMENT

No. Code
L T P
1 English 2 0 2 3
Chapter -2
Detailed first year curriculum contents
I. Mandatory Induction Program
[Induction program for students to be offered right at the start of the first year.]
3 weeks duration
 Physical activity
 Creative Arts
 Universal Human Values
 Literary
 Proficiency Modules
 Lectures by Eminent People
 Visits to local Areas
 Familiarization to Dept./Branch & Innovations
9
B.TECH 1st YEAR ELECTRONICS ENGINEERING (SEMESTER -I)
COURSE STRUCTURE
Course Category
S.No Course Title L T P Credits Sessional External
Code Code
Physics (Waves and
1 BSC101C 3 1 - 4 25 75 BSC
Optics)
Mathematics-I (Calculus
2 BSC103 D 3 1 - 4 25 75 BSC
and Linear Algebra)
Engineering Graphics
3 ESC102 - - 4 2 30 70 ESC
& Design
Programming for
4 ESC103 3 - - 3 25 75 ESC
Problem solving
5 ESC104 Workshop- I - - 4 2 30 70 ESC
Physics (Waves and

6 BSC104C - - 3 1.5 15 35 BSC
Optics) lab
Programming for
7 ESC105 4 2 15 35 ESC
Problem solving Lab - -
TOTAL 9 2 15 18.5 165 435
NOTE : (1) Theory exams will be of 03 hours duration and Practical exams will be of 02 hours duration
(2) Theory Exam of each subject will consist of two sections i.e Section A and Section B. Section A is Compulsory
having 10 short answer type questions and should cover the entire syllabus. Section B should have six questions
covering the whole syllabus and the students are required to attempt any four questions out of six.
(3) Additional 3 credits per year to be earned through MOOCs
10
B.TECH 1st YEAR ELECTRONICS ENGINEERING (SEMESTER -II)
COURSE STRUCTURE
Course Sessional External Category
S.No. Course Title L T P Credits
Code Code
Mathematics-II
(Calculus, Ordinary
1 BSC106 D 3 1 - 4 25 75 BSC
Differential Equations
and Complex Variable)
Basic Electrical
2 ESC101/ 3 1 - 4 25 75 AECC
ESC101A* Engineering/
Basic Electrical
Technology
3 BSC 102 Chemistry 3 1 - 4 25 75 BEC
ESC106 Workshop- II - 4 2 30 70 BEC

4 -
5 HSMC101 English 2 - - 2 25 75 BEC

ESC107/
Basic Electrical
6 - - 2 1 15 35 BSC
ESC107A* Technology Lab
7 BSC 105 Chemistry Lab - - 3 1.5 15 35 BEC
8 HSMC102 English Lab - - 2 1 15 35 BEC

TOTAL 11 3 11 19.5 175 475
* Applicable from 2020-2021 onwards.
Workshop I and Workshop II can be decided for specific branch by the respective Dean/Principal of
respective UTD/Institution
11
B.TECH 2nd YEAR ELECTRONICS ENGINEERING (SEMESTER -III)
COURSE STRUCTURE
Sr. Category Course Course Title Hours Credits Sessio Final Total
No Code per week nal Marks
Marks
L T P
1 PCC EEN301 Digital Electronics 3 0 0 3 25 75 100
2 PCC ECP302 Semiconductor Devices 3 0 0 3 25 75 100
3 PCC ECC01 Signal and Systems 3 0 0 3 25 75 100
4 PCC ECP305 Circuit Analysis and 3 0 0 3 25 75 100

Synthesis
5 BSC BS301 Mathematics-III 3 1 0 4 25 75 100

6 MC MC01/ Indian Constitution/ 2 0 0 0 25 75 100
MC02 Essence of Indian
Traditional Knowledge
7 ESC ESC01 Engineering 3 1 0 4 25 75 100
mechanics
8 PCC EEN351 Semiconductor Devices 0 0 2 1 15 35 50

Lab
9 PCC EEN352 Digital Electronics Lab 0 0 2 1 15 35 50
10 PCC EEN353 Circuit Analysis and 0 0 2 1 15 35 50

Synthesis lab
11 PROJ ES301 Electronics Project 0 0 6 3 30 70 100

Workshop-I
20 2 12 26 250 700 950
12
B.TECH 2nd YEAR ELECTRONICS ENGINEERING (SEMESTER –IV)
COURSE STRUCTURE
Sr. Categ Course Course Title Hours Credits Sessio Final Total
No. ory Code per week nal Marks
Marks
L T P
1 PCC EEN401 Principle of 3 0 0 3 25 75 100
Communication
systems
2. PCC ECP402 Analog Electronics 3 0 0 3 25 75 100
Circuits
3 PCC EEN402 Measurement and 3 0 0 3 25 75 100
Instrumentation
4 PCC ECC02 Electromagnetic Waves 3 0 0 3 25 75 100
5 PCC EEN403 Data Structures and 3 1 0 4 25 75 100

algorithms
6 BSC BSC01 Biology 2 1 0 3 25 75 100
7 PCC EEN451 Communication Systems 0 0 2 1 15 35 50
lab
8 PCC ECP452 Analog Electronics 0 0 2 1 15 35 50
Circuits lab
Instrumentation lab
1 PCC ECC52 Electromagnetic 0 0 2 1 15 35 50
0 Waves lab
1 Workshop-II
17 2 14 26 240 660 900
13
Semester 1
Syllabus
14
Course code BSC101C (Th)/ BSC104 (Lab)
Category Basic Science Course
Course title Physics (Waves and Optics) (Theory & Lab.)
Scheme and L T P Credit
Credits Semester-I
3 1 3 5.5
Course Objective
 To acquire skills allowing the student to identify and apply formulas of optics and wave physics
using course literature.
 To be able to identify and illustrate physical concepts and terminology used in optics and to be
able to explain them in appropriate detail.
 To be able to make approximate judgements about optical and other wave phenomena
when necessary.
 To acquire skills allowing the student to organise and plan simpler laboratory course
experiments and to prepare an associated oral and written report.
(i) Physics (Waves and Optics)( [L : 3; T:1; P : 0 (4 credits)]

Prerequisites:
(i) Mathematics course on Differential equations
Unit 1: Simple harmonic motion, damped and forced simple harmonic oscillator (7)
Mechanical and electrical simple harmonic oscillators, complex number notation and phasor
representation of simple harmonic motion, damped harmonic oscillator – heavy, critical and light
damping, energy decay in a damped harmonic oscillator, quality factor, forced mechanical and
electrical oscillators, electrical and mechanical impedance, steady state motion of forced damped
harmonic oscillator, power absorbed by oscillator
Unit 2: Non-dispersive transverse and longitudinal waves in one dimension and introduction
to dispersion (7): Transverse wave on a string, the wave equation on a string, Harmonic waves,
reflection and transmission of waves at a boundary, impedance matching, standing waves and their
eigenfrequencies, longitudinal waves and the wave equation for them, acoustics waves and speed
of sound, standing sound waves. Waves with dispersion, water waves, superposition of waves and
Fourier method, wave groups and group velocity.
Unit 3: The propagation of light and geometric optics (10): Fermat‟s principle of stationary
time and its applications e.g. in explaining mirage effect, laws of reflection and refraction, Light as
an electromagnetic wave and Fresnel equations, reflectance and transmittance, Brewster‟s angle,
total internal reflection, and evanescent wave. Mirrors and lenses and optical instruments based on
them, transfer formula and the matrix method
Unit 4: Wave optics (6): Huygens‟ principle, superposition of waves and interference of light by
wavefront splitting and amplitude splitting; Young‟s double slit experiment, Newton‟s rings,
Michelson interferometer, Mach-Zehnder interferometer. Farunhofer diffraction from a single slit
and a circular aperture, the Rayleigh criterion for limit of resolution and its application to vision;
Diffraction gratings and their resolving power
Unit 5: Lasers (8): Einstein‟s theory of matter radiation interaction and A and B coefficients;
15
amplification of light by population inversion, different types of lasers: gas lasers ( He- Ne, CO2),
solid-state lasers(ruby,Neodymium), dye lasers; Properties of laser beams: monochromaticity,
coherence, directionality and brightness, laser speckles, applications of lasers in science,
engineering and medicine.
Course Outcome:
 Student will be able to identify and apply formulas of optics and wave physics using course
literature.
 Illustration of physical concepts and terminology used in optics and to be able to explain them in
appropriate detail.
 To be able to make approximate judgements about optical and other wave phenomena
when necessary.
 To acquire skills allowing the student to organise and plan simpler laboratory course experiments
and to prepare an associated oral and written report.
REFERENCE BOOKS:
(i) Ian G. Main, Oscillations and waves in physics
(ii) H.J. Pain, The physics of vibrations and waves
(iii) E. Hecht, A. Ghatak, Optics
(iv) O. Svelto, Principles of Lasers
16
(ii) Physics (Waves & Optics) Lab[ L : 0; T:0 ; P : 3 (1.5credits)]
At least 06 experiments from the following
1. To determine the frequency of an electric tuning fork by Melde‟s experiment and verify λ2 –T
law.
2. To study Lissajous Figures.
3. Familiarization with: Schuster`s focusing; determination of angle of prism.
4. To determine refractive index of the Material of a prism using sodium source.
5. To determine the dispersive power and Cauchy constants of the material of a prism using
mercury source.
6. To determine the wavelength of sodium source using Michelson‟s interferometer.
7. To determine wavelength of sodium light using Fresnel‟s Biprism.
8. To determine wavelength of sodium light using Newton‟s Rings.
9. To determine wavelength of (1) Na source and (2) spectral lines of Hg source using plane
diffraction grating.
10. To determine dispersive power and resolving power of a plane diffraction grating.
11. To determine the wavelength of laser source using diffraction of single slit.
12. To determine the wavelength of laser source using diffraction of double slits.
13. To determine angular spread of He-Ne laser using plane diffraction grating
LABORATORY OUTCOMES
On the successful competition of this course, the students should be able to:
 Analyze Lissajous Figures..
 Understand the concept of dispersive power.
 Understand the various physical phenomenon used to determine the wavelength.
Note: Experiments may be added or deleted as per the availability of equipment.

REFERENCE BOOKS:
1. Advanced Practical Physics for students, B.L. Flint and H.T. Worsnop, 1971, Asia
Publishing House
2. A Text Book of Practical Physics, I.Prakash & Ramakrishna, 11th Ed., 1511,Kitab Mahal
3. Advanced level Physics Practicals, Michael Nelson and Jon M. Ogborn, 4th Edition,
reprinted 1985, Heinemann Educational Publishers
4. A Laboratory Manual of Physics for undergraduate classes, D.P.Khandelwal,1985, Vani
Pub.
17
Course code BSC103D
MATHEMATICS 1
Course title
(Calculus and Linear Algebra)
L T P Credits
Scheme and Semester –I
Credits 3 1 - 4
Pre-requisites (if
any) -
OBJECTIVES:
The objective of this course is to familiarize the prospective engineers with techniques in calculus,
multivariate analysis and linear algebra. It aims to equip the students with standard concepts and
tools at an intermediate to advanced level that will serve them well towards tackling more advanced
level of mathematics and applications that they would find useful in their disciplines. More
precisely, the objectives are:
 To introduce the idea of applying differential and integral calculus to notions of curvature and
to improper integrals. Apart from some applications it gives a basic introduction on Beta and
Gamma functions.
 To introduce the fallouts of Rolle‟s Theorem that is fundamental to application of analysis to
Engineering problems.
 To develop the tool of power series and Fourier series for learning advanced Engineering
Mathematics.
 To familiarize the student with functions of several variables that is essential in most branches
of engineering.
 To develop the essential tool of matrices and linear algebra in a comprehensive manner.
Module 1: Calculus: (6 hours): Evolutes and involutes; Evaluation of definite and improper
integrals; Beta and Gamma functions and their properties; Applications of definite
integrals to evaluate surface areas and volumes of revolutions.
Module 2: Calculus: (6 hours): Rolle‟s Theorem, Mean value theorems, Taylor‟s and Maclaurin
theorems with remainders; indeterminate forms and L'Hospital's rule; Maxima and
minima.
Module 3:Sequences and series: (10 hours): Convergence of sequence and series, tests for
convergence; Power series, Taylor's series, series for exponential, trigonometric and
logarithm functions; Fourier series: Half range sine and cosine series, Parseval‟s
theorem.
Module 4: Multivariable Calculus (Differentiation): (8 hours): Limit, continuity and partial
derivatives, directional derivatives, total derivative; Tangent plane and normal line;
Maxima, minima and saddle points; Method of Lagrange multipliers; Gradient, curl and
divergence.
Module 5: Matrices (10hours): Inverse and rank of a matrix,rank-nullity theorem; System of

linear equations; Symmetric, skew- symmetric and orthogonal matrices; Determinants;
Eigenvalues and eigenvectors; Diagonalization of matrices; Cayley- Hamilton Theorem,
and Orthogonal transformation.
18
Couse Outcome:
 Students were familiarized with functions of several variables that is essential in most branchesof
engineering.
 Essential tool of matrices and linear algebra in a comprehensive manner developed.
TEXTBOOKS/REFERENCES BOOKS:
1. G.B. Thomas and R.L. Finney, Calculus and Analytic geometry, 9th Edition,Pearson,
Reprint, 2002.
2. Erwin kreyszig, Advanced Engineering Mathematics, 9th Edition, John Wiley & Sons, 2006.
3. Veerarajan T., Engineering Mathematics for first year, Tata McGraw-Hill, New Delhi, 2008.
4. Ramana B.V., Higher Engineering Mathematics, Tata McGraw Hill New Delhi,
11thReprint, 2010.
5. D. Poole, Linear Algebra: A Modern Introduction, 2nd Edition, Brooks/Cole, 2005.
6. N.P. Bali and Manish Goyal, A text book of Engineering Mathematics, Laxmi
Publications, Reprint, 2008.
7. B.S. Grewal, Higher Engineering Mathematics, Khanna Publishers, 36th Edition, 2010.
19
Course code ESC 102
Category Engineering Science Courses
Course title Engineering Graphics & Design (Theory & Lab.)
Scheme L T P Credit Semester – I

and - 0 4 2
Credits
Pre-requisites -
(if any)
Traditional Engineering Graphics:
Principles of Engineering Graphics; Orthographic Projection; Descriptive Geometry; Drawing
Principles; Isometric Projection; Surface Development; Perspective; Reading a Drawing; Sectional
Views; Dimensioning & Tolerances; True Length, Angle; intersection, Shortest Distance.
Computer Graphics:
Engineering Graphics Software; -Spatial Transformations; Orthographic Projections; Model

Viewing; Co-ordinate Systems; Multi-view Projection; Exploded Assembly; Model Viewing;
Animation; Spatial Manipulation; Surface Modelling; Solid Modelling; Introduction to Building
Information Modelling (BIM)
Module 1: Introduction to Engineering Drawing covering,

Principles of Engineering Graphics and their significance, usage of Drawing instruments, lettering,
Conic sections including the Rectangular Hyperbola (General method only); Cycloid, Epicycloid,
Hypocycloid and Involute; Scales
– Plain, Diagonal and Vernier Scales;
Module 2: Orthographic Projections covering

Principles of Orthographic Projections-Conventions - Projections of Points and lines inclined to
both planes; Projections of planes inclined Planes - Auxiliary Planes;
Module 3: Projections of Regular Solids covering

Those inclined to both the Planes- Auxiliary Views; Draw simple annotation, dimensioning and
scale. Floor plans that include: windows, doors, and fixtures such as WC, bath, sink, shower, etc.
Module 4: Sections and Sectional Views of Right Angular Solids covering, Prism, Cylinder,
Pyramid, Cone – Auxiliary Views; Development of surfaces of Right Regular Solids - Prism,
Pyramid, Cylinder and Cone; Draw the sectional orthographic views of geometrical solids, objects
from industry and dwellings (foundation to slab only)
Module 5: Isometric Projections covering,

Principles of Isometric projection – Isometric Scale, Isometric Views, Conventions; Isometric
Views of lines, Planes, Simple and compound Solids; Conversion of Isometric Views to
Orthographic Views and Vice-versa, Conventions;
20
Module 6: Overview of Computer Graphics covering, listing the computer technologies that
impact on graphical communication, Demonstrating knowledge of the theory of CAD software
[such as: The Menu System, Toolbars (Standard, Object Properties, Draw, Modify and
Dimension), Drawing Area (Background, Crosshairs, Coordinate System), Dialog boxes and
windows, Shortcut menus (Button Bars), The Command Line (where applicable), The Status Bar,
Different methods of zoom as used in CAD, Select and erase objects.; Isometric Views of lines,
Planes, Simple and compound Solids];
Module 7: Customization & CAD Drawing consisting of set up of the drawing page and the
printer, including scale settings, Setting up of units and drawing limits; ISO and ANSI standards
for coordinate dimensioning and tolerance; Orthographic constraints, Snap to objects manually and
automatically; Producing drawings by using various coordinate input entry methods to draw
straight lines, Applying various ways of drawing circles.
Course Outcomes
All phases of manufacturing or construction require the conversion of new ideas and design
concepts into the basic line language of graphics. Therefore, there are many areas (civil,
mechanical, electrical, architectural and industrial) in which the skills of the CAD technicians
play major roles in the design and development of new products or construction. Students
prepare for actual work situations through practical training in a new state-of-the-art computer
designed CAD laboratory using engineering software. This course is designed to:
 Learn about the visual aspects of engineering design. Analyze engineering graphics standards.
 Prepare orthographic and isometric projection.
 Draw section of solids and conic sections.
 Exposure to computer-aided geometric design
TEXT/REFERENCE BOOKS:
1. Bhatt N.D., Panchal V.M. & Ingle P.R., (2014), Engineering Drawing, Charotar Publishing
House
2. Shah, M.B. & Rana B.C. (2008), Engineering Drawing and Computer Graphics, Pearson
Education
3. Agrawal B. & Agrawal C. M. (2012), Engineering Graphics, TMHPublication
4. Aggarwal M L & Sandhya Dixit (2017), Engineering Graphics and Machine Drawing, Dhanpat
Rai & Company P Ltd.
5. Narayana, K.L. & P Kannaiah (2008), Text book on Engineering Drawing, Scitech Publishers,
(Corresponding set of) CAD Software Theory and User Manuals
6. Narayana, K.L. & P Kannaiah (2008), Text book on Engineering Drawing, Scitech Publishers
(Corresponding set of) CAD Software Theory and User Manuals
21
Course code ESC103(Th)/ESC105(Lab)
Category Engineering Science Course
Course title Programming for Problem Solving (Theory & Lab.)
Scheme and L T P Credit Semester – I/II
Credits 3 0 4 5
Pre-requisites (if -
any)
(i) Programming for Problem Solving ( [L : 3; T:0; P : 0 (3 credits)] [contact hrs : 40]
Unit 1: Introduction to Programming (4 lectures) Introduction to components of a computer

system (disks, memory, processor, where a program is stored and executed, operating
system, compilers etc.) - (1 lecture).
Idea of Algorithm: steps to solve logical and numerical problems. Representation

of Algorithm: Flowchart/Pseudocode with examples. (1 lecture)
From algorithms to programs; source code, variables (with data types) variables and
memory locations, Syntax and Logical Errors in compilation, object and executable
code- (2 lectures)
Unit 2: Arithmetic expressions and precedence (2 lectures) Conditional Branching and

Loops (6 lectures) Writing and evaluation of conditionals and consequent branching
(3 lectures) Iteration and loops (3 lectures)
Unit 3: Arrays (6 lectures) Arrays (1-D, 2-D), Character arrays and Strings
Unit 4: Basic Algorithms (6 lectures) Searching, Basic Sorting Algorithms (Bubble, Insertion
and Selection), Finding roots of equations, notion of order of complexity through
example programs (no formal definition required)
Unit 5: Function (5 lectures) Functions (including using built in libraries), Parameter passing
in functions, call by value, Passing arrays to functions: idea of call by reference
Unit 6: Recursion (4 -5 lectures) Recursion, as a different way of solving problems. Example
programs, such as Finding Factorial, Fibonacci series, Ackerman function etc. Quick
sort or Merge sort.
Unit 7: Structure (4 lectures) Structures, Defining structures and Array of Structures
Unit 8: Pointers (2 lectures) Idea of pointers, Defining pointers, Use of Pointers in self-
referential structures, notion of linked list (no implementation)
Unit 9: File handling (only if time is available, otherwise should be done as part of the lab)
TEXT BOOKS
(i) Byron Gottfried, Schaum's Outline of Programming with C, McGraw-Hill
(ii) E. Balaguruswamy, Programming in ANSI C, Tata McGraw-Hill
REFERENCE BOOKS
(i) Brian W. Kernighan and Dennis M. Ritchie, The C Programming Language, Prentice
Hall of India
22
COURSE OUTCOMES
The student will learn
To formulate simple algorithms for arithmetic and logical problems.
To translate the algorithms to programs (in C language).
To test and execute the programs and correct syntax and logical errors.
To implement conditional branching, iterationand recursion.
To decompose a problem into functions and synthesize a complete program using divide and
conquer approach.
To use arrays, pointers and structures to formulate algorithms and programs.
To apply programming to solve matrix addition and multiplication problems and searching and
sorting problems.
To apply programming to solve simple numerical method problems, namely rot finding of
function, differentiation of function and simple integration.
(ii) Laboratory - Programming for Problem Solving[ L : 0; T:0 ; P : 4 (2credits)] Tutorial 1:

Problem solving using computers:
Lab1: Familiarization with programming environment
Tutorial 2: Variable types and type conversions:

Lab 2: Simple computational problems using arithmetic expressions
Tutorial 3: Branching and logical expressions:
Lab 3: Problems involving if-then-else structures

Tutorial 4: Loops, while and for loops:
Lab 4: Iterative problems e.g., sum of series

Tutorial 5: 1D Arrays: searching, sorting:
Lab 5: 1D Array manipulation
Tutorial 6: 2D arrays and Strings
Lab 6: Matrix problems, String operations

Tutorial 7: Functions, call by value:
Lab 7: Simple functions
Tutorial 8 &9: Numerical methods (Root finding, numerical differentiation, numerical integration):
Lab 8 and 9: Programming for solving Numerical methods problems
Tutorial 10: Recursion, structure of recursive calls
Lab 10: Recursive functions
Tutorial 11: Pointers, structures and dynamic memory allocation
Lab 11: Pointers and structures
Tutorial 12: File handling:
Lab 12: File operations
23
LABORATORY OUTCOMES
To formulate the algorithms for simpleproblems
To translate given algorithms to a working and correct program
To be able to correct syntax errors as reported by the compilers
To be able to identify and correct logical errors encountered at run time
To be able to write iterative as well as recursive programs
To be able to represent data in arrays, strings and structures and manipulate them through a
program
To be able to declare pointers of different types and use them in defining self- referential
structures.
To be able to create, read and write to and from simple text files.
********
24
Semester II
Syllabus
25
Course code BSC106D
Course title Mathematics -II (Calculus, Ordinary Differential
Equations and Complex Variable )
Scheme and L T P Credit Semester-II

Credits 3 1 0 4
Pre-requisites -
(if any)
OBJECTIVES:
The objective of this course is to familiarize the prospective engineers with techniques in
multivariate integration, ordinary and partial differential equations and complex variables. It aims
to equip the students to deal with advanced level of mathematics and applications that would be
essential for their disciplines. More precisely, the objectives are:
a. To acquaint the student with mathematical tools needed in evaluating multiple integrals and
their usage.
b. To introduce effective mathematical tools for the solutions of differential equations that model
physical processes.
c. To introduce the tools of differentiation and integration of functions of complex variable that
are used in various techniques dealing engineering problems.
Module 1:Multivariable Calculus (Integration): (10 hours) Multiple Integration: Double

integrals (Cartesian), change of order of integration in double integrals, Change of
variables (Cartesian to polar), Applications: areas and volumes, Center of mass and
Gravity (constant and variable densities);Triple integrals (Cartesian), orthogonal
curvilinear coordinates, Simple applications involving cubes, sphere and rectangular
parallelepipeds; Scalar line integrals, vector line integrals, scalar surface integrals,
vector surface integrals, Theorems of Green, Gauss and Stokes.
Module 2: First order ordinary differential equations:(6 hours) Exact, linear and Bernoulli‟s
equations, Euler‟s equations, Equations not of first degree: equations solvable for p,
equations solvable for y, equations solvable for x and Clairaut‟s type.
Module 3: Ordinary differential equations of higher orders:(8 hours) Second order linear
differential equations with variable coefficients, method of variation of parameters,
Cauchy-Euler equation; Power series solutions; Legendre polynomials, Bessel functions
of the first kind and their properties.
Module 4: Complex Variable – Differentiation:(8 hours): Differentiation, Cauchy-Riemann

equations, analytic functions, harmonic functions, finding harmonic conjugate;
elementary analytic functions (exponential, trigonometric, logarithm) and their
properties; Conformal mappings, Mobius transformations and their properties.
Module 5: Complex Variable – Integration:(8 hours): Contour integrals, Cauchy-Goursat

theorem (without proof), Cauchy Integral formula (without proof), Liouville‟s theorem
and Maximum-Modulus theorem (without proof); Taylor‟s series, zeros of analytic
functions, singularities, Laurent‟s series; Residues, Cauchy Residue theorem (without
proof), Evaluation of definite integral involving sine and cosine, Evaluation of certain
improper integrals using the Bromwich contour.
26
Course Outcome:
 Students will be able to develop mathematical tools needed in evaluating multiple
integrals and their usage.
 Effective mathematical tools for the solutions of differential equations that model
physical processes built.
 Differentiation and integration of functions of complex variable will be developedthat
are used in various techniques dealing engineering problems.
TEXTBOOKS/REFERENCES BOOKS:
1. G.B. Thomas and R.L. Finney, Calculus and Analytic geometry, 9th Edition, Pearson,
Reprint, 2002.
2. Erwin kreyszig, Advanced Engineering Mathematics, 9th Edition, John Wiley & Sons, 2006.
3. W. E. Boyce and R. C. DiPrima, Elementary Differential Equations and Boundary Value
Problems, 9th Edn., Wiley India, 2009.
4. S. L. Ross, Differential Equations, 3rd Ed., Wiley India, 1984.
5. E. A. Coddington, An Introduction to Ordinary Differential Equations, Prentice Hall
India, 1995.
6. E. L. Ince, Ordinary Differential Equations, Dover Publications, 1958.
7. J. W. Brown and R. V. Churchill, Complex Variables and Applications, 7th Ed., Mc- Graw
Hill, 2004.
8. N.P. Bali and Manish Goyal, A text book of Engineering Mathematics, Laxmi
Publications, Reprint, 2008.
9. B.S. Grewal, Higher Engineering Mathematics, Khanna Publishers, 36th Edition, 2010
27
Course code ESC 101(Th)/ESC107(Lab)
Course title Basic Electrical Engineering (Theory & Lab.)
L T P Credit
Scheme and Semester –I/II
Credits 3 1 2 5
Pre-requisites (if
any) -
(i) Basic Electrical Engineering [L : 3; T:1; P : 0 (4 credits)]
Module 1 : DC Circuits (8 hours) Electrical circuit elements (R, L and C), voltage and current
sources, Kirchoff current and voltage laws, analysis of simple circuits with dc
excitation. Superposition, Thevenin and Norton Theorems. Time- domain analysis of
first-order RL and RC circuits.
Module 2: AC Circuits (8 hours) Representation of sinusoidal waveforms, peak and rms values,
phasor representation, real power, reactive power, apparent power, power factor.
Analysis of single-phase ac circuits consisting of R, L, C, RL, RC, RLC combinations
(series and parallel), resonance. Three- phase balanced circuits, voltage and current
relations in star and deltaconnections.
Module 3: Transformers (6 hours) Magnetic materials, BH characteristics, ideal and practical
transformer, equivalent circuit, losses in transformers, regulation and efficiency. Auto-
transformer and three-phase transformer connections.
Module 4: Electrical Machines (8 hours) Generation of rotating magnetic fields, Construction
and working of a three-phase induction motor, Significance of torque-slip
characteristic. Loss components and efficiency, starting and speed control of induction
motor. Single-phase induction motor. Construction, working, torque-speed
characteristic and speed control of separately excited dc motor. Construction and
working of synchronous generators.
Module 5: Power Converters (6 hours) DC-DC buck and boost converters, duty ratio control.
Single-phase and three-phase voltage source inverters; sinusoidal modulation.
Module 6: Electrical Installations (6 hours) Components of LT Switchgear: Switch Fuse Unit
(SFU), MCB, ELCB, MCCB, Types of Wires and Cables, Earthing. Types of Batteries,
Important Characteristics for Batteries. Elementary calculations for energy
consumption, power factor improvement and battery backup.
TEXT / REFERENCE BOOKS
(i) D. P. Kothari and I. J. Nagrath, “Basic Electrical Engineering”, Tata McGraw Hill, 2010.
(ii) D. C. Kulshreshtha, “Basic Electrical Engineering”, McGraw Hill, 2009.
(iii) L. S. Bobrow, “Fundamentals of Electrical Engineering”, Oxford University Press, 2011.
(iv) E. Hughes, “Electrical and Electronics Technology”, Pearson, 2010.
(v) V. D. Toro, “Electrical Engineering Fundamentals”, Prentice Hall India, 1989.
COURSE OUTCOMES
 To understand and analyze basic electric andmagnetic circuits
28
 To study the working principles of electrical machines and power converters.
 To introduce the components of low voltage electrical installations
(ii) Basic Electrical Engineering Laboratory [ L : 0; T:0 ; P : 2 (1 credit)]
List of experiments/demonstrations:
 Basic safety precautions. Introduction and use of measuring instruments – voltmeter,
ammeter, multi-meter, oscilloscope. Real-life resistors, capacitors and inductors.
 Measuring the steady-state and transient time-response of R-L, R-C, and R-L-C
circuits to a step change in voltage (transient may be observed on a storage
oscilloscope). Sinusoidal steady state response of R-L, and R-C circuits – impedance
calculation and verification. Observation of phase differences between current and
voltage. Resonance in R-L-Ccircuits.
 Transformers: Observation of the no-load current waveform on an oscilloscope (non-
sinusoidal wave-shape due to B-H curve nonlinearity should be shown along with a
discussion about harmonics). Loading of a transformer: measurement of primary and
secondary voltages and currents, andpower.
 Three-phase transformers: Star and Delta connections. Voltage and Current
relationships (line-line voltage, phase-to-neutral voltage, line and phase currents).
Phase-shifts between the primary and secondary side. Cumulative three-phase power
in balanced three-phase circuits.
 Demonstration of cut-out sections of machines: dc machine (commutator-brush
arrangement), induction machine (squirrel cage rotor), synchronous machine (field
winging - slip ring arrangement) and single-phase induction machine.
 Torque Speed Characteristic of separately excited dc motor.
 Synchronous speed of two and four-pole, three-phase induction motors. Direction
reversal by change of phase-sequence of connections. Torque-Slip Characteristic of
an induction motor. Generator operation of an induction machine driven at super-
synchronous speed.
 Synchronous Machine operating as a generator: stand-alone operation with a load.
Control of voltage through field excitation.
 Demonstration of (a) dc-dc converters (b) dc-ac converters – PWM waveform (c) the
use of dc-ac converter for speed control of an induction motor and (d) Components
of LT switchgear.
Laboratory Outcomes
 Get an exposure to common electrical components and their ratings.
 Make electrical connections by wires of appropriate ratings.
 Understand the usage of common electrical measuring instruments.
 Understand the basic characteristics of transformers and electrical machines.
 Get an exposure to the working of power electronic converters.
29
Course code ESC 101 A (Th)/ESC107A (Lab)
Course title Basic Electrical Technology (Theory & Lab.)
L T P Credits
Scheme and Credits Semester –I/II
3 1 2 5
Pre-requisites (if any) -
[ESC101-A] Basic Electrical Technology (Theory) [L : 3; T : 1; P:0, (4

credit)]Course Outcomes:
 To analyze and solve D. C. networks by different analysis methods and theorems.
 To formulate and solve complex AC single phase and three circuits
 To identify the type of electrical machines and their applications
 To introduce the components of low voltage electrical installations
Module 1: DC Circuits (8 hours)

Basic definitions, Electrical circuit elements (R, L and C), voltage and current sources, Ohm’s
law and its limitations, Kirchhoff current and voltage laws, analysis of simple circuits with dc
excitation by mesh analysis and node analysis, Superposition, Thevenin’s, Norton’s and
Maximum Power Transfer Theorems.
Module 2: AC Circuits (8 hours)

Representation of sinusoidal waveforms, peak and rms values, phasor representation, real
power, reactive power, apparent power, power factor. Analysis of single-phase ac circuits
consisting of R, L, C, RL, RC, RLC combinations (series and parallel), resonance.
Module3: Poly Phase Systems (5 hours)
Advantages of 3-phase systems, generation of 3-phase voltages, three phase connections (star
and delta), voltage and current relations in star and delta connections, three phase powers,
analysis of 3-phase balanced circuits, measurement of 3-phase power- 2 wattmeter method.
Module 4: Transformers (6 hours)
Magnetic Circuits, construction and working of single phase transformer, ideal and practical
transformer, equivalent circuit, losses in transformers, regulation and efficiency, Auto-
transformer
Module 5: Electrical Machines (8 hours)

Induction motor: Construction, principle and working of a three-phase induction motor,Single-
phase induction motor: Construction, principle and working, Applications
DC machine: Construction, principle and working of dc motor and generator. Applications
Synchronous machine: Construction, principle and working of synchronous motor and
generators. Applications
30
Module 6: Electrical Installations (6 hours)
Components of LT Switchgear: Fuses, MCB, ELCB, MCCB, Types of Wires, Earthing,
Power factor improvement.
TEXT / REFERENCE BOOKS
1.D. P. Kothari and I. J. Nagrath, “Basic Electrical Engineering”, Tata McGraw Hill,2010.
2. D. C. Kulshreshtha, “Basic Electrical Engineering”, McGraw Hill, 2009.
3. L. S. Bobrow, “Fundamentals of Electrical Engineering”, Oxford University Press,2011.
4. E. Hughes, “Electrical and Electronics Technology”, Pearson, 2010.
5. V. D. Toro, “Electrical Engineering Fundamentals”, Prentice Hall India, 1989.
Online Recourses:
1. NPTL Web Course, Basic Electrical Technology, Prof. G. D. Roy, Prof. N. K. De,Prof.
T.K. Bhattacharya, IIT Kharagpur (https://nptel.ac.in/courses/108/105/108105053/)
2. NPTL Web Course, Electrical Machines-I, Prof. P. Sasidhara Rao, Prof. G.
Sridhara Rao, Dr. Krishna Vasudevan, IIT Madras
(https://nptel.ac.in/courses/108/106/108106071/)
3. NPTL Web Course, Electrical Machines-II, Prof. P. Sasidhara Rao, Prof. G.
Sridhara Rao, Dr. Krishna Vasudevan, IIT Madras https://nptel.ac.in/courses/108/106/108106072/
[ESC107-A] Basic Electrical Technology Laboratory [ L : 0; T:0 ; P

: 2 (1 credit)]
List of experiments/demonstrations:
 Basic safety precautions. Introduction and use of measuring instruments – voltmeter,
ammeter, multi-meter, oscilloscope. Real-life resistors, capacitors and inductors.
 Verification of network theorem in DC circuits, Thevenin’s Theorem, Norton’s, Theorem,
Superposition Theorem etc.
 Sinusoidal steady state response of R-L, and R-C circuits – impedance calculation
and verification. Observation of phase differences between current and voltage.
Resonance in R-L-C circuits.
 Poly phase systems, three phase connections (star and delta), measurement of three
phase power
 Transformers: Observation of the no-load current waveform on an oscilloscope (non-
sinusoidal wave-shape due to B-H curve nonlinearity should be shown along with a
discussion about harmonics). Loading of a transformer: measurement of primary and
secondary voltages and currents, and power.
 Demonstration of cut-out sections of machines: dc machine (commutator- brush
arrangement), induction machine (squirrel cage rotor), synchronous
31
machine (field winging - slip ring arrangement) and single-phase inductionmachine.
 Torque Speed Characteristic of separately excited dc motor.
 Components of LT switchgear.
LABORATORY OUTCOMES
 Get an exposure to common electrical components and their ratings.
 Make electrical connections by wires of appropriate ratings.
 Understand the usage of common electrical measuring instruments.
 Understand the basic characteristics of transformers and electrical machines.
32
Course code BSC102(Th)/BSC105(Lab)
Course title Chemistry (Theory & Lab.)
Contents
(i) Chemistry (Concepts in chemistry for engineering)
(ii) Chemistry Laboratory
Scheme and L T P Credit Semester –II
Credits s
3 1 3 5.5
any)
(i) Chemistry (Concepts in chemistry for engineering) [L : 3; T:1; P : 0 (4 credits)]
Unit 1: Atomic and molecular structure (12 lectures)

Schrodinger equation. Particle in a box solutions and their applications for conjugated
molecules and nanoparticles. Forms of the hydrogen atom wave functions and the plots of
these functions to explore their spatial variations. Molecular orbitals of diatomic
molecules and plots of the multicenter orbitals. Equations for atomic and molecular
orbitals. Energy level diagrams of diatomic. Pi-molecular orbitals of butadiene and
benzene and aromaticity. Crystal field theory and the energy level diagrams for transition
metal ions and their magnetic properties. Band structure of solids and the role of doping
on band structures.
Unit 2: Spectroscopic techniques and applications (8 lectures)
Principles of spectroscopy and selection rules. Electronic spectroscopy. Fluorescence
and its applications in medicine. Vibrational and rotational spectroscopy of diatomic
molecules. Applications. Nuclear magnetic resonance and magnetic resonance imaging,
surface characterisation techniques. Diffraction and scattering.
Unit 3: Intermolecular forces and potential energy surfaces (4 lectures)

Ionic, dipolar and van Der Waals interactions. Equations of state of real gases and
critical phenomena. Potential energy surfaces of H3, H2F and HCN and trajectories
on thesesurfaces.
Unit 4: Use of free energy in chemical equilibria (6 lectures)

Thermodynamic functions: energy, entropy and free energy. Estimations of entropyand
free energies. Free energy and emf. Cell potentials, the Nernst equation and applications.
Acid base, oxidation reduction and solubility equilibria. Water chemistry. Corrosion.
Use of free energy considerations in metallurgy through Ellingham diagrams.
Unit 5: Periodic properties (4 Lectures)

Effective nuclear charge, penetration of orbitals, variations of s, p, d and f orbital
energies of atoms in the periodic table, electronic configurations, atomic and ionicsizes,
ionization energies, electron affinity and electronegativity, polarizability, oxidation
states, coordination numbers and geometries, hard soft acids and bases, molecular
geometries
Unit 6: Stereochemistry (4 lectures)
Representations of 3 dimensional structures, structural isomers and stereoisomers,
configurations and symmetry and chirality, enantiomers, diastereomers, optical activity,
33
absolute configurations and conformational analysis. Isomerism in transitional metal
compounds
Unit 7: Organic reactions and synthesis of a drug molecule (4 lectures)

Introduction to reactions involving substitution, addition, elimination, oxidation,
reduction, cyclization and ring openings. Synthesis of a commonly used drug molecule.
TEXT BOOKS
1. University chemistry, by B. H. Mahan
2. Chemistry: Principles and Applications, by M. J. Sienko and A. Plane
3. Fundamentals of Molecular Spectroscopy, by C. N. Banwell
4. Engineering Chemistry (NPTEL Web-book), by B. L. Tembe, Kamaluddin and M. S.
Krishnan
5. Physical Chemistry, by P. W. Atkins
6. Organic Chemistry: Structure and Function by K. P. C. Volhardt and N. E. Schore,
5th Edition
COURSE OUTCOMES
The concepts developed in this course will aid in quantification of several concepts in
chemistry that have been introduced at the 10+2 levels in schools. Technology is being
increasingly based on the electronic, atomic and molecular level modifications.
Quantum theory is more than 100 years old and to understand phenomena at nanometer
levels; one has to base the description of all chemical processes at molecular levels. The
course will enable the student to:
 Analyse microscopic chemistry in terms of atomic and molecular orbitals and
intermolecular forces.
 Rationalise bulk properties and processes using thermodynamic considerations.
 Distinguish the ranges of the electromagnetic spectrum used for exciting different
molecular energy levels in various spectroscopic techniques
 Rationalise periodic properties such as ionization potential, electronegativity,
oxidation states andelectronegativity.
 List major chemical reactions that are used in the synthesis of molecules.
(ii) Chemistry Laboratory [ L : 0; T:0 ; P : 3 (1.5 credits)]

Choice of 10-12 experiments from the following:
Determination of surface tension and viscosity
Thin layer chromatography
Ion exchange column for removal of hardness of water
Determination of chloride content of water
Colligative properties using freezing pointdepression
Determination of the rate constant of a reaction
Determination of cell constant and conductance of solutions
Potentiometry - determination of redox potentials and emfs
Synthesis of a polymer/drug
Saponification/acid value of anoil
Chemical analysis of asalt
Lattice structures and packing of spheres
Models of potential energy surfaces
Chemicaloscillations- Iodine clock reaction
Determination of the partition coefficient of a substance between two immiscible liquids
Adsorption of acetic acid by charcoal
Use of the capillary viscosimeters to the demonstrate of the isoelectric point as the pH of
34
minimum viscosity for gelatin sols and/or coagulation of the white part of egg .
LABORATORY OUTCOMES
The chemistry laboratory course will consist of experiments illustrating the
principles of chemistry relevant to the study of science and engineering. The
students will learn to:
Estimate rate constants of reactions from concentration of reactants/products as a
function of time
Measure molecular/system properties such as surface tension,
viscosity, conductance of solutions, redox potentials, chloride content of water, etc
Synthesize a small drug molecule and analyse a salt sample
35
Course code HSMC 101(Th)/HSMC102(Lab)
Category Humanities and Social Sciences including Management
Course title English (Theory & Lab.)
Scheme and L T P Credit Semester – II

Credits 2 0 2 3
any)
ENGLISH
Detailed contents
1. Vocabulary Building
The concept of Word Formation, Root words from foreign languages and their use
in English, Acquaintance with prefixes and suffixes from foreign languages in
English to form derivatives. Synonyms, antonyms, and standard abbreviations.
2. Basic Writing Skills
Sentence Structures, Use of phrases and clauses in sentences, Importance of proper
punctuation, Creating coherence, Organizing principles of paragraphs in
documents, Techniques for writing precisely
3. Identifying Common Errors in Writing
Subject-verb agreement, Noun-pronounagreement, Misplaced modifiers, Articles,
Prepositions, Redundancies, Clichés
4. Nature and Style of sensibleWriting
Describing, Defining, Classifying, Providing examples or evidence
5. Writing introduction and conclusion
6. Writing Practices
Comprehension, Précis Writing, Essay Writing
ENGLISH LABORATORY [ L : 0; T:0 ; P : 2 (1 credit)]
 Listening Comprehension
 Pronunciation, Intonation, Stress and Rhythm
 Common Everyday Situations: Conversations and Dialogues
 Communication at Workplace
 Interviews
 Formal Presentations
SUGGESTED READINGS:
(i) Practical English Usage. MichaelSwan. OUP. 1995.
(ii) Remedial English Grammar. F.T. Wood. acmillan.2007
(iii) On Writing Well. William Zinsser. Harper Resource Book. 2001
(iv) Study Writing. Liz Hamp-Lyons and Ben Heasly. Cambridge University Press. 2006.
(v) Communication Skills. Sanjay Kumar and PushpLata. Oxford University Press. 2011.
(vi) Exercises in Spoken English. Parts. I-III. CIEFL, Hyderabad. Oxford University Press
36
COURSE OUTCOMES
The student will acquire basic proficiency in English including reading and
listening comprehension, writing and speaking skills.
*******
37
Course code ESC 104
Course title Workshop-I
Scheme and L T P Credit

Semester-I
Credits - 0 4 2
Pre-requisites
(if any) -
Workshop-I
PART-A
Computer Engineering Workshop
1. To study and demonstrate Block diagram of Digital Computer System and brief
explanation of each unit.
2. To demonstrate History/ Generation/ classifications and different types of Personnel
Computer. To study and demonstrate internal parts of a Computer System (Card
level) and other peripheral devices and explanation of POST & BIOS.
3. To study and demonstrate primary memory and secondary memory.
4. To demonstrate CPU Block diagram and other Peripheral chips, Mother Board/ Main
Board and its parts, Connectors, Add On Card Slots etc.
5. To study working of various types of monitors: CRT type, LCD type & LED type.
6. To study Keyboard and Mouse: Wired, Wireless, Scroll & Optical with detail working.
7. To study Printers: Dot Matrix Printers, Daisy wheel Printers, Ink-Jet Printers and Laser
Jet Printers with detailed working explanation.
8. Assembly / Installation and Maintenance of Personnel Computer Systems: Practical
exercise on assembly of Personnel Computer System, Installation of Operating System:
Windows & Linux etc, Installation of other Application Softwares and Utility Softwares,
Fault finding in Personnel Computers: Software or Hardware wise, Virus: Introduction,
its Types & Removal techniques, Data Backup and Restore, Data Recovery Concepts,
Typical causes of Data loss.
9. To demonstrate networking concepts: Introduction of Connecting devices: Hub, Switch &
Router etc, Networking Cable preparation: Normal & Cross Cables, Data Transferring
Techniques from one Computer System to another Computer System, Configuration of
Switch/ Routers etc.
PART-B
Electrical Workshop
1. Introduction of Electrical Safety precautions, Electrical Symbols, Electrical Materials,
abbreviations commonly used in Electrical Engg. and familiarization with tools used in
Electrical Works.
38
2. To make a Straight Joint & Tee joint on 7/22 PVC wire and Britannia Joint on GI wire.
3. To study fluorescent Tube Light, Sodium Lamp and High Pressure Mercury Vapour
Lamp.
4. To study different types of earthing and protection devices e.g. MCBs, ELCBs and fuses.
5. To study different types of domestic and industrial wiring and wire up a circuit used for
Stair case and Godown wiring.
6. To make the connection of fan regulator with lamp to study the effect of increasing and
decreasing resistance in steps on the lamp.
7. To fabricate half wave and full wave rectifiers with filters on PCB.
8. Maintenance and Repair of Electrical equipment i,e Electric Iron , Electric Toaster ,Water
heater, Air coolers and Electric Fans etc.
9. To study soldering process with simple soldering exercises.
10. To make the connection of a three core cable to three pin power plug and connect the
other cable end by secured eyes connection using 23/0.0076”or 40/0.0076” cable.
PART- C
Electronics Workshop
1. To study and demonstrate basic electronic components, Diode, Transistor, Resistance,
Inductor and capacitor.
2. To study and demonstrate resistance color coding, measurement using color code and
multimeter and error calculation considering tolerance of resistance.
3. To study and demonstrate Multimeter and CRO- front panel controls, description of block
diagram of CRT and block diagram of CRO.
4. To study and demonstrate Vp(peak voltage),Vpp(peak to peak voltage), Time, frequency
and phase using CRO.
5. Introduction to function generator. Functions of front panel controls and measurement of
different functions on CRO.
6. To study and demonstrate variable DC regulated power supply, function of controls and
DC measurement using multimeter and CRO.
7. Soldering practice on wire mesh or a resistance decade board includes fabrication,
soldering, lacing, harnessing forming and observation.
8. Testing of components using multimeter and CRO like diode, transistor, resistance
capacitor, Zener diode and LED.
9. To study and demonstrate rectification, half wave, Full wave and bridge rectifier.
Fabrication, assembly and waveform observation.
10. To design and fabricate a printed circuit board of a Zener regulated/ series regulated
power supply and various measurements, testing of power supply.
Note: At least 8 exercises are to be performed from each part by the students.
COURSE OUTCOMES:
After the completion of the course the student will be able to:
CO1- Acquire skills in basic engineering practice.
CO2- Have working knowledge of various equipment used in workshop.
CO3- Have hands on experience about various machines and their components.
CO4- Obtain practical skills of basic operation and working of tools used in the workshop.
39
Course code ESC 106
Course title Workshop-II
L T P Credit
Scheme and
Semester-II
Credits - 0 4 2
Pre-requisites -
(if any)
MECHANICAL WORKSHOP
COURSE OUTCOMES (COS):
After studying this course the students would:
CO 1- Have exposure to mechanical workshop layout and safety aspects.

CO 2- Understand the functions of various machines and cutting tools used in machine shop.
CO 3- Practice real time job preparation using various operations related to machine shop such
as filing, drilling, milling & turning.
CO 4 - Practice job preparation in welding shop.
CO 5 - Learn to use different measuring tools like vernier caliper, vernier height gauge and
micrometer.
CO 6 - Practice job preparation in sheet metal shop.
List of Exercises:
Fitting, sheet metal and welding workshop:
1. To study layout, safety measures and different engineering materials (mild steel, medium
carbon steel, high carbon steel, high speed steel and cast iron etc) used in workshop.
2. To study and use of different types of tools, equipments, devices & machines used in
fitting, sheet metal and welding section.
3. To determine the least count of vernier calliper, vernier height gauge, micrometer and
take different reading over given metallic pieces using these instruments.
4. To study and demonstrate the parts, specifications & operations performed on lathe
machine.
5. To study and demonstrate the parts, specifications & operations performed on
milling machine.
6. To study and demonstrate the parts, specifications & operations performed on
shaper machine.
7. To prepare a job involving different type of filing practice exercise in specified
dimensions.
8. To prepare a job involving multi operational exercise (drilling, counter sinking,
tapping, reaming, hack sawing etc.)
9. To prepare a multi operational sheet metal job (self secured single groove joint/ hasp &
stay etc.).
10. To practice striking an arc, straight short bead, straight continuous bead and restart of
electrode in flat position by arc welding on given M.S. plate as per size.
11. To practice tack weld of two close plate in flat position by arc welding on given M.S.
plate as per size.
12. To practice close butt joint in flat position by arc welding on given M.S. plate as per size.
NOTE: - At least nine exercises should be performed from the above list; remaining three
may either be performed from above list or designed by the concerned institution as per the
40
scope of the syllabus and facilities available in institute.
41
Annexure-A
Implementation of Credit Transfer/Mobility Policy of online courses
Reference: Gazette of India (Extraordinary) Part-III, Section-4 No. 295, UGC (Credit
Framework for Online Learning Courses through SWAYAM) Regulation, 2016, dated
19/07/2016.
With reference to 12th Academic Council Meeting dated 03/05/2017 (Agenda Item No.
AC/11/12), wherein MOOCs were adopted in the CBCS scheme, In continuation to that,
following modalities are proposed to introduce the credit transfer policy in academic
curriculum for the Massive Open Online Courses (MOOC‟s) offered through SWAYAM
(Study Webs of Active-Learning for Young Aspiring Minds) Portal.
A. General Guidelines
1. The SWAYAM shall notify in June and November every year, the list of the online
learning Courses going to be offered in the forthcoming Semester on its website
https://swayam.gov.in.
2. All the UTDs/Affiliated Colleges shall, within 4 weeks from the date of notification by
SWAYAM, consider through their Chairperson/Principal the online learning courses
being offered through the SWAYAM platform; and keeping in view their academic
requirements, decide upon the courses which it shall permit for credit transfer and
keeping in view the following points:
a) There is non-availability of suitable teaching staff for running a course in the

Department.
b) The facilities for offering the elective papers (courses), sought for by the
students are not on offer/scheme in the Institution, but are available on the
SWAYAM platform.
c) The courses offered on SWAYAM would supplement the teaching-learning
process in the Institution.
d) Online courses through SWAYAM should not be more than 20% of total
courses offered in a particular semester of a programme.
3. The courses offered in a particular semester will be compiled by Digital India Cell as
decided and forwarded by concerned UTDs and affiliated colleges in the prescribed
format to [email protected] and compiled set will be put up in Academic
Council for approval.
4. Student can opt for 12-16 weeks course equivalent to 3-6 credits under mentorship of
faculty (MHRD MOOC‟s guidelines 11.1(J) issued by the MHRD vide its orders
dated 11/03/2016).
42
5. Every student being offered a particular paper (course) would be required to register for
the MOOCs for that course/paper on SWAYAM through University‟s/Affiliated
College‟s SWAYAM-NPTEL Local Chapter.
6. The UTD/College may designate a faculty member as course coordinator/mentor to
guide the students (at least 20 students) throughout the course with 2 hours per week
contribution and with mentor addition on the Local Chapter. The mentor
Chairperson/Principal will ensure the provision of facilities for smooth running of the
course viz. Internet facility and proper venue in the department/college.
7. Digital India Cell of the University will be the Nodal point for keeping track of
MOOCs enrolments in the University and the concerned chairpersons/principals are
expected to aware their students/faculty about the online courses.
8. Importance of online learning and credit transfer policy must be shared with the
students at entry level by the concerned department/college. Same may be
incorporated during induction program for newly admitted students.
9. The departmental/college MOOC coordinators appointed by chairpersons of concerned
departments/Principals of affiliated colleges will be responsible for identification of
relevant MOOCs in the UTDs/Colleges and smooth conduction during the course.
B. Credit Transfer/Mobility of MOOCs

1. The parent Institution (offering the Course) shall give the equivalent credit weightage to
the students for the credits earned through online learning courses through SWAYAM
platform in the credit plan of the program.
2. Following pattern will be followed for distribution of credits and will be applicable to all
students from Jan 2018 onwards:
Program Duration Minimum Credits to be

earned*
B.Tech Semester I to VIII 3
M.Tech/MBA/M.Sc./MA Semester I to IV 3
BBA/BCA/B.Sc./BA Semester I to VI 3
*All students of UTDs/Affiliated colleges of all courses have to mandatorily earn

minimum prescribed credits.
Note: From session 2019-20 onwards, for B.Tech program, a student has to earn
at least 12 credits during the duration of the Degree subject to the passing of at
least one MOOC course (carrying minimum 3 credits per year).
3. A student will be eligible to get Under-Graduate/Post-Graduate degree (B.Tech/M.Tech)

with Honours if he/she completes additional credits through MOOC‟s. (AICTE
Model Curriculum, Chapter1(B)). Following pattern will be followed for earning
additional credits for the award of Honours degree:
43
Program Duration Credits to be Minimum CGPA
earned*
B.Tech Semester I to VIII 12 8.0
M.Tech Semester I to IV 6 8.0
*Inclusive of Minimum credits to be earned mentioned in clause B(2) above.
4. The earned credits shall be accepted and transferred to the total credits of the concerned students by the
University for Completion of his/her degree. Credits earned through MOOCs will be incorporated in
the mark sheet issued to the student by Controller of Examination.
5. Credits for MOOC‟s will be verified by the concerned department/college and will be forwarded to
Controller of Examination for further processing.
6. The courses where model curriculum of AICTE is not applicable, pattern laid down as in B(2) will be
followed.
NOTE:
1. These guidelines will be applicable to all Affiliating institutions under University along with all UTDs.
Affiliating colleges will establish their own Local Chapter on SWAYAM and follow the same process.
2. For further clarifications, Notifications “Credit Framework for Online Learning Courses through
SWAYAM” (UGC Regulations dated 19/07/2016) and “MHRD MOOC‟s guidelines” (MHRD
guidelines dated 11/03/2016) may be referred.
44
Semester III
Scheme & Syllabus
45
B.TECH 2nd YEAR EE(IoT) (SEMESTER -III)
COURSE STRUCTURE
Sr. Category Course Course Title Hours Credits Sessio Final Total
No Code per week nal Marks
Marks
L T P
1 PCC EEN301 Digital Electronics 3 0 0 3 25 75 100
2 PCC ECP302 Semiconductor Devices 3 0 0 3 25 75 100
3 PCC ECC01 Signal and Systems 3 0 0 3 25 75 100
4 PCC ECP305 Circuit Analysis and 3 0 0 3 25 75 100

Synthesis
5 BSC BS301 Mathematics-III 3 1 0 4 25 75 100
6 MC MC01/ Indian Constitution/ 2 0 0 0 25 75 100
MC02 Essence of Indian
Traditional Knowledge
7 ESC ESC01 Engineering 3 1 0 4 25 75 100
mechanics
8 PCC EEN351 Semiconductor Devices 0 0 2 1 15 35 50

lab
9 PCC EEN352 Digital Electronics Lab 0 0 2 1 15 35 50
10 PCC EEN353 Circuit Analysis and 0 0 2 1 15 35 50

Synthesis lab
Workshop-I
20 2 12 26 250 700 950
(2) Theory Exam of each subject will consist of two sections i.e Section A and Section B. Section A is
Compulsory having 10 short answer type questions and should cover the entire syllabus. Section B
should have six questions covering the whole syllabus and the students are required to attempt any four
questions out of six.
46
B.TECH 2nd YEAR EE(IoT) (SEMESTER –IV)
COURSE STRUCTURE
Marks
L T P
Communication
systems
Circuits
Instrumentation

algorithms
6 BSC BSC01 Biology 2 1 0 3 25 75 100
lab
Circuits lab
Instrumentation lab
Waves lab
Workshop-II
17 2 14 26 240 660 900
47
Semester III
Syllabus
48
Digital Electronics
EEN301
L T P CR Theory 75
3 0 0 3 Class Work 25
Duration of Exam: 3 Hrs Total 100
Course Objectives:
• To introduce Digital signals, numbers systems, various types of logic gates and various types of codes
• To understand and design various combinational circuits
• To study Sequential circuits, F/F Conversions, sequence generators, Counters
• To explore various types of Digital Logic Families and to introduce various types of A/D and D/A converters
• To classification of memories and various types of Programmable Logic Devices
Syllabus
UNIT 1: FUNDAMENTALS OF DIGITAL TECHNIQUES:
Digital signal, logic gates: AND, OR, NOT, NAND, NOR, EX-OR, EX-NOR, Boolean algebra. Review of
Number systems. Binary codes: BCD, Excess-3, Gray, EBCDIC, ASCII, Error detection and correction
codes. Design using gates, Karnaugh map and Quine Mcluskey methods of simplification.
UNIT 2: COMBINATIONAL DESIGN USING MSI DEVICES:
Multiplexers and Demultiplexers and their use as logic elements, Decoders, Adders / Subtractors, BCD
arithmetic circuits, Encoders, Decoders / Drivers for display devices.
UNIT 3: SEQUENTIAL CIRCUITS:
Flip Flops: S-R, J-K, T, D, master-slave, edge triggered, shift registers, F/F Conversions, sequence
generators, Counters, Asynchronous and Synchronous Ring counters and Johnson Counter, Design of
Synchronous and Asynchronous sequential circuits.
UNIT 4: DIGITAL LOGIC FAMILIES:
Switching mode operation of p-n junction, bipolar and MOS. devices. Bipolar logic families: RTL, DTL,
DCTL, HTL, TTL, ECL, MOS, and CMOS logic families. Tristate logic, Interfacing of CMOS and TTL
families. 82
UNIT 5: A/D AND D/A CONVERTERS:
Sample and hold circuit, weighted resistor and R -2 R ladder D/A Converters, specifications for D/A
converters. A/D converters : Quantization, parallel -comparator, successive approximation, counting type,
dual-slope ADC, specifications of ADCs.
UNIT 6: MEMORIES AND PLD’S:
Classification of memories –RAM organization l-Bipolar RAM cell – MOSFET RAM cell – Dynamic
RAM cell – ROM- PROM –EPROM –EEPROM –EAPROM –Programmable Logic Devices –
Programmable Logic Array (PLA)-Programmable Array Logic (PAL)-Field Programmable Gate Arrays
(FPGA).
49
COURSE OUTCOMES:
On successful complete of this course, the students should be able to:
• Represent numerical values in various number systems and perform number conversions between
different number systems.
• Design digital combinational circuits like decoders, encoders, multiplexers, and de-multiplexers
including arithmetic circuits (half adder, full adder).
• Analyze and design sequential digital circuits like registers, counters using flip flop.
• Describe he difference logic families and analog to digital converter.
• Nomenclature and technology in the area of memory devices: ROM, RAM, PROM, PLD, FPGA
etc.
TEXT/ REFERENCE BOOKS:
1. Modern Digital Electronics(Edition III) : R. P. Jain; TMH.

2. Digital Principles and Applications: Malvino & Leach; McGraw Hill.
3. Digital Electronics, Kharate : Oxford publications
4. Digital Fundamentals, Thomas L. Floyed, Pearson
5. Digital Design: Morris Mano; PHI
50
Semiconductor Devices
ECP302 C
o
L T P CR Theory 75 u
3 0 0 3 Class Work 25 r
s
Duration of Exam: 3 Hrs Total 100 e
Objectives:
 To give exposure to the students about Semiconductor Physics.

 To understand about working and characteristics of semiconductor diodes
 To understand the working of bipolar Junction Transistor and FETs and their characteristics.
 To learn the concept of fabrication technologies of semiconductor devices.
Syllabus
UNIT 1: Introduction to Semiconductor Physics: Review of Quantum Mechanics, Electrons in
periodic Lattices, E-k diagrams. Energy bands in intrinsic and extrinsic silicon: Carrier
transport: diffusion current, drift current, mobility and resistivity, sheet resistance.
UNIT 2: Generation and recombination of carriers, Poisson and continuity equation, P-N junction,
P-N junction diode, I-V characteristics, and small signal switching models: Avalanche
breakdown, Zener breakdown, Zener diode, Zener diode as constant voltage regulator,
Schottky diode, LED, photodiode and Solar Cell.
UNIT 3: Bipolar Junction Transistor (BJT), Structure, Working, Common Base CB, Common
Emitter CE and Common Collector CC configuration, I-V characteristics and Current gain,
Ebers-Moll Model.
UNIT 4: Field Effect transistor (FET), Junction FET, MOSFET: Depletion Type, Enhancement
type MOSFET, Structure, Working, I-V characteristics and small signal models of MOS
Transistor, MOS capacitor.
UNIT 5: Integrated circuit fabrication process: oxidation, diffusion, ion implantation, etching,
photolithography, chemical vapor deposition, sputtering, twin-tub CMOS process.
COURSE OUTCOMES:
On successful completion of this course, the students should be able to :-
 Understand the principles of semiconductor Physics.
 Describe characteristics of semiconductor diodes and utilize the mathematical models of
semiconductor junction diodes for different applications
 Implement and evaluate the characteristics of BJT and FETs
 Learn and Understand various semiconductor Fabrication Process.
51
TEXT /REFERENCE BOOKS:
1. David A. Bell, ―Electronics Devices and Circuits, 5th edition, Oxford Higher Education.
2. Jacob Millman , Christos Halkias , Electronics - Analog and Digital Circuit and Systems, McGraw-
Hill Education.
3. Boylstad : Electronics devices and Circuit theory: Robert L. Boylestad Louis Nashelsky, Pearson.
4. G. Streetman, and S. K. Banerjee, ―Solid State Electronic Devices,‖ 7th edition, Pearson,2014.
5. D. Neamen, D. Biswas "Semiconductor Physics and Devices," McGraw-Hill Education
6. S. M. Sze and K. N. Kwok, ―Physics of Semiconductor Devices,‖ 3rd edition, John Wiley &
Sons, 2006.
7. C.T. Sah, ―Fundamentals of solid state electronics,‖ World Scientific Publishing Co. Inc, 1991.
8. Y. Tsividis and M. Colin, ―Operation and Modeling of the MOS Transistor,‖ Oxford Univ.Press,
2011.
52
Signal and System
ECC01
L T P CR Theory 75
Course Objects:
 To introduce students about various types of signals and their classifications.
 To understand students about LSI (linear shift invariant) systems and their properties.
 To introduce students about properties of Fourier Series, Fourier Transforms like DTFT and
DFT.
 To introduce students about Laplace Transform, Z Transform and State-Space Analysis.
Syllabus
Unit 1: Signals and systems as seen in everyday life, and in various branches of engineering and
science, Energy and power signals, continuous and discrete time signals, continuous and
discrete amplitude signals, System properties, linearity: additivity and homogeneity, shift-
invariance, causality, stability, realizability.
Unit 2: Linear shift-invariant (LSI) systems, impulse response and step response, convolution,
input output behaviour with a periodic convergent inputs, Characterization of causality
and stability of linear shift-invariant systems, System representation through differential
equations and difference equations.
Unit 3: Periodic and semi-periodic inputs to an LSI system, the notion of a frequency response and
its relation to the impulse response, Fourier series representation, the Fourier Transform,
convolution/multiplication and their effect in the frequency domain, magnitude and phase
response, Fourier domain duality. The Discrete-Time Fourier Transform (DTFT) and the
Discrete Fourier Transform (DFT), Parseval's Theorem, the idea of signal space and
orthogonal bases
Unit 4: The Laplace Transform, notion of eigen functions of LSI systems, a basis of eigen
functions, region of convergence, poles and zeros of system, Laplace domain analysis,
solution to differential equations and system behaviour
Unit 5: The z-Transform for discrete time signals and systems eigen functions, region of
convergence, z-domain analysis.
Unit 6: State-space analysis and multi-input, multi-output representation, the state-transition

matrix and its role, The Sampling Theorem and its implications spectra of sampled
53
signals. Reconstruction: ideal interpolator, zero-order hold, first order hold, and so on,
Aliasing and its effects, relation between continuous and discrete time systems.
COURSE OUTCOMES:
On successful completion of this course, the students should be able to:
 Analyze different types of signals.
 Represent continuous and discrete systems in time and frequency domain using different
transforms.
 Describe applications of DFT, Laplace transform and Z transform
 Perform sampling and reconstruction of a signal.
1. A.V. Oppenheim, A.S. Willsky and I.T. Young, "Signals and Systems", Prentice Hall, 1983.
2. R.F. Ziemer, W.H. Tranter and D.R. Fannin, "Signals and Systems - Continuous and Discrete", 4th
edition, Prentice Hall, 1998.
3. Papoulis, "Circuits and Systems: A Modern Approach", HRW, 1980.
4. B.P. Lathi, "Signal Processing and Linear Systems", Oxford University Press, 1998.
5. Douglas K. Lindner, "Introduction to Signals and Systems", McGraw Hill International Edition:
1999.
6. Simon Haykin, Barry van Veen, "Signals and Systems", John Wiley and Sons (Asia) Private
Limited, 1998.
7. Robert A. Gabel, Richard A. Roberts, "Signals and Linear Systems", John Wiley and Sons, 1995.
8. M. J. Roberts, "Signals and Systems - Analysis using Transform methods and MATLAB", TMH,
2003.
9. J. Nagrath, S. N. Sharan, R. Ranjan, S. Kumar, "Signals and Systems", TMH New Delhi, 2001.
10. Ashok Ambardar,"Analog and Digital Signal Processing", 2nd Edition, Brooks/ Cole Publishing
Company (An international Thomson Publishing Company), 1999.
54
Circuit Analysis and Synthesis
ECP305 C
o
L T P CR Theory 75 u
3 0 0 3 Class Work 25 r
s
Duration of Exam: 3 Hrs Total 100 e
Objectives:
 To understand students about basic electrical circuits with nodal & mesh analysis.
 To give exposure to the students about various network theorem applicable to AC circuits.
 To describe the application of Laplace transform.
 To understand the students about network functions, two port network for analysis of electrical
networks.
 To learn the students about filters and types of filters.
Syllabus
Unit 1: Node and Mesh Analysis: matrix approach of network containing voltage and current
sources, and reactance, source transformation and duality. Network theorems:
Superposition, reciprocity, Thevenin’s, Norton’s, Maximum power Transfer, compensation
and Tallegen's theorem as applied to AC circuits.
Unit 2: Laplace transforms and properties: Partial fractions, Transfer functions, analysis of RC,
RL, and RLC networks with and without initial conditions with Laplace transform.
Unit 3: Network functions: Terminal pairs or Ports, concept of complex frequency, Network
functions for one-port and two-port networks, poles and zeros of Network functions,
Restrictions on pole and zero Locations for driving point functions and transfer functions,
Time domain behaviour from the pole-zero plot.
Unit 4: Two port network: Relationship of two-port variables, short-circuit Admittance

parameters, open circuit impedance parameters, Transmission parameters, hybrid
parameters, relationships between parameter sets, condition for reciprocity, condition for
symmetry, Inter-connection of two port networks.
Unit 5: Filter fundamentals: parameters of a filter, filter networks, characteristics of filter

networks, Introduction of filters: low pass, high pass, band pass and band reject filters.
COURSE OUTCOMES:
1. Analyse basics electrical circuits with nodal and mesh analysis and apply network theorems to
AC circuits
2. Apply Laplace Transform for steady state and transient analysis.
3. Identify different network functions and behaviour based on Pole Zero plot.
4. Evaluate two port network parameters, relationship between parameters and interconnection of
55
two port network.
5. Analyse filter fundamentals and behaviour of different filters
1. Van, Valkenburg; “Network analysis”; Prentice Hall of India, 2000.
2. Sudhakar, A., Shyammohan, S. P.; “Circuits and Network”; Tata McGraw-Hill New Delhi,
1994.
3. A William Hayt, “Engineering Circuit Analysis” 8th Edition, McGraw-Hill Education.
56
Mathematics-III
BS 301
L T P CR Theory 75
Course Objectives:
 To gain knowledge about:
 Laplace Transform,
 Fourier Transform, Z- transform and
 Numerical Methods.
Syllabus
Unit 1:Transform Calculus-1: Polynomials – Orthogonal Polynomials – Lagrange’s, Chebysev
Polynomials; Trigonometric Polynomials. Laplace Transform, Properties of Laplace
Transform, Laplace transform of periodic functions. Finding inverse Laplace transform by
different methods, convolution theorem. Evaluation of integrals by Laplace transform,
solving ODEs and PDEs by Laplace Transform method.
Unit 2:Transform Calculus-2: Fourier transforms, Z-transform: Properties, methods, inverses and
their applications.
Unit 3:Vector differentiation, gradient, divergence and curl, line and surface integrals, path
independence, statements and illustrations of theorems of Green, Stokes and Gauss, arc
length parameterization, applications.
COURSE OUTCOME:
 To understand Laplace Transform and its applications
 To solve problems on Fourier Transform, Z Transform and their applications
 To solve the curl, gradient and divergence
 To apply the applications curl, gradient and divergence in various theorems in various
applications
TEXT/REFERENCES BOOKS
1. Erwin Kreyszig, Advanced Engineering Mathematics, 9 th Edition, John Wiley & Sons,2006.
2. B.S. Grewal, Higher Engineering Mathematics, Khanna Publishers, 35th Edition, 2000.
3. Veerarajan T., Engineering Mathematics, Tata McGraw-Hill, New Delhi, 2008.
4. P. Kandasamy, K. Thilagavathy, K. Gunavathi, Numerical Methods, S. Chand & Company,
2nd Edition, Reprint 2012.
5. S.S. Sastry, Introductory methods of numerical analysis, PHI, 4th Edition, 2005.
57
INDIAN CONSTITUTION
MC01
L T P CR Theory 75
Course Objectives
 To gain knowledge about Historical perspectives, salient features and Characteristics of CoI .
 To gain knowledge about various schemes of Fundamental Rights, Fundamental Duties,
Article-19 & Article 21 and D.P.S.P
 To know about the basic structure of the Government of India.
 To know about Constitutional Amendments and Emergency Provisions.
 To gain knowledge about the Local Government of India and its Three Tier Structure.
Syllabus
Unit 1: Meaning of the terms: Constitution, Constitutional Laws and Constitutionalism. History of
Indian Constitution -Company rule and Crown Rule. Salient features and Characteristics of
Constitution of India.
Unit 2: Part-1to Part-V of Constitution of India. Various Schemes of Fundamental Rights, Scheme
of Fundamental Duties and its legal status, DPSP- Its importance and implementation.
Unit 3: Federal Structure and distribution of Legislative and Financial Powers between the Union
and the States. Parliamentary form of Government in India- The Constitution Power and
the Status of President of India.
Unit 4: Amendments of the Constitutional Powers and Procedure. The Historical Perspectives of
the Constitutional Amendments in India. Various Emergency Provisions in India.
Unit 5: Local Self Government-Its three-tier structure and Constitutional scheme of India.
COURSE OUTCOMES:
On successful completion of this course the student should be able to:
 Understand the Historical Perspective of Constitution of India.
 Understand various schemes and scope of Fundamental Rights, Fundamental Duties and
D.P.S.P
 Understand the Type of Government in India and its Federal Structure.
 Understand Constitutional Amendments and Emergency Provisions in India.
 Understand Local Self Government and its three tier structure.
REFERENCE BOOKS
1. The Constitutional Law of India 9th Edition, by Pandey. J.N
2. The Constitution of India by P.M Bakshi.
3. Constitutional Law of India by Narender Kumar.
58
Essence of Indian Traditional Knowledge
भभभभभभ भभभभभभभभभ
MC02
L T P CR Theory 75
Course Objective:
The course aims at imparting basic principles of thought process, reasoning and inferencing.
Sustainability is at the core of Indian Traditional knowledge Systems connecting society and
nature. Holistic life style of yogic science and wisdom capsules in Sanskrit literature are also
important in modern society with rapid technological advancements and societal disruptions.
Part-I focuses on introduction to Indian Knowledge Systems, Indian perspective of modern

scientific world-view, and basic principles of Yoga and holistic health care system.
Course Contents
−Yoga and Holistic Health care
−Case studies
REFERENCE BOOKS:
 V. Sivaramakrishnan (Ed.), Cultural Heritage of India-course material, Bharatiya
VidyaBhavan, Mumbai. 5th Edition, 2014
 Swami Jitatmanand, Modern Physics and Vedant, BharatiyaVidya Bhavan
 Swami Jitatmanand, Holistic Science and Vedant, Bharatiya Vidya Bhavan
 Fritz of Capra, Tao of Physics
 Fritz of Capra, The Wave of life
 VN Jha (Eng. Trans.), Tarkasangraha of Annam Bhatta, International Chinmay Foundation,
Velliarnad, Arnakulam
 Yoga Sutra of Patanjali, Ramakrishna Mission, Kolkata
 GN Jha (Eng. Trans.), Ed. RN Jha, Yoga-darshanam with Vyasa Bhashya, Vidyanidhi
Prakashan, Delhi 2016
 RN Jha, Science of Consciousness Psychotherapyand Yoga Practices, Vidyanidhi Prakashan,
Delhi 2016
59
 P B Sharma (English translation), Shodashang Hridayan
Pedagogy: Problem based learning, group discussions, collaborative mini projects.
COURSE OUTCOME:
 Ability to understand, connect up and explain basics of Indian traditional knowledge in modern
scientific perspective.
60
Engineering Mechanics
ESC01
L T P CR Theory 75
Course Objectives:
 To provide an introductory treatment of Engineering
 To give a working knowledge of statics with emphasis on force equilibrium and free body
diagrams.
 To provide an understanding of the kinds of stress and deformation and how to determine
them in a wide range of simple, practical structural problems.
 To give an understanding of the mechanical behaviour of materials under various load
conditions
Syllabus
Unit 1: Introduction to Engineering Mechanics covering, Force Systems Basic concepts, Particle
equilibrium in 2-D & 3-D; Rigid Body equilibrium; System of Forces, Coplanar Concurrent
Forces, Components in Space – Resultant- Moment of Forces and its Application; Couples and
Resultant of Force System, Equilibrium of System of Forces, Free body diagrams, Equations of
Equilibrium of Coplanar Systems and Spatial Systems; Static Indeterminancy
Unit 2: Friction covering, Types of friction, Limiting friction, Laws of Friction, Static and
Dynamic Friction; Motion of Bodies, wedge friction, screw jack & differential screw jack.
Unit 3: Basic Structural Analysis covering, Equilibrium in three dimensions; Method of Sections;
Method of Joints; How to determine if a member is in tension or compression; Simple Trusses;
Zero force members; Beams & types of beams; Frames & Machines;
Unit 4: Centroid and Centre of Gravity covering, Centroid of simple figures from first principle,
centroid of composite sections; Centre of Gravity and its implications; Area moment of inertia-
Definition, Moment of inertia of plane sections from first principles, Theorems of moment of
inertia, Moment of inertia of standard sections and composite sections; Mass moment inertia of
circular plate, Cylinder, Cone, Sphere, Hook.
Unit 5: Virtual Work and Energy Method- Virtual displacements, principle of virtual work for
particle and ideal system of rigid bodies, degrees of freedom. Active force diagram, systems with
friction, mechanical efficiency. Conservative forces and potential energy (elastic and
gravitational), energy equation for equilibrium. Applications of energy method for equilibrium.
Stability of equilibrium.
Unit 6: Review of particle dynamics- Rectilinear motion; Plane curvilinear motion (rectangular,
path, and polar coordinates). 3-D curvilinear motion; Relative and constrained motion; Newton’s
2nd law (rectangular, path, and polar coordinates). Work-kinetic energy power, potential energy.
Impulse-momentum (linear, angular); Impact (Direct and oblique).
61
Unit 7:Introduction to Kinetics of Rigid Bodies covering, Basic terms, general principles in
dynamics; Types of motion, Instantaneous centre of rotation in plane motion and simple problems;
D’Alembert’s principle and its applications in plane motion and connected bodies Work energy
principle and its application in plane motion of connected bodies; Kinetics of rigid body rotation.
Unit 8:Mechanical Vibrations covering, Basic terminology, free and forced vibrations, resonance
and its effects; Degree of freedom; Derivation for frequency and amplitude of free vibrations
without damping and single degree of freedom system, simple problems, types of pendulum, use of
simple, compound and torsion pendulums; Tutorials from the above Units covering, To find the
various forces and angles including resultants in various parts of wall crane, roof truss, pipes, etc.;
To verify the line of polygon on various forces; To find coefficient of friction between various
materials on inclined plan; Free body diagrams various systems including block-pulley; To verify
the principle of moment in the disc apparatus; Helical block; To draw a load efficiency curve for a
screw jack
COURSE OUTCOMES:
 Use scalar and vector analytical techniques for analyzing forces in statically determinate
structures
 Apply fundamental concepts of kinematics and kinetics of particles to the analysis of simple,
practical problems
 Apply basic knowledge of maths and physics to solve real-world problems, Understand
measurement error, and propagation of error in processed data.
 Understand basic kinematics concepts – displacement, velocity and acceleration (and their
angular counterparts);
 Understand basic dynamics concepts – force, momentum, work and energy; Understand and be
able to apply Newton’s laws of motion;
 Understand and be able to apply other basic dynamics concepts - the Work-Energy principle,
Impulse-Momentum principle and the coefficient of restitution;
 Extend all of concepts of linear kinetics to systems in general plane motion (applying Euler's
Equation and considering energy of a system in general plane motion, and the work of couples
and moments of forces)
 Learn to solve dynamics problems. Appraise given information and determine which
concepts apply, and choose an appropriate solution strategy; and Attain an introduction to
basic machine parts such as pulleys and mass-spring systems.
1. Irving H. Shames (2006), Engineering Mechanics, 4th Edition, Prentice Hall
2. F. P. Beer and E. R. Johnston (2011), Vector Mechanics for Engineers, Vol I - Statics, Vol II,
– Dynamics, 9th Ed, Tata McGraw Hill
3. R. C. Hibbler (2006), Engineering Mechanics: Principles of Statics and Dynamics, Pearson
Press.
4. Andy Ruina and Rudra Pratap (2011), Introduction to Statics and Dynamics, Oxford
University Press
5. Shanes and Rao (2006), Engineering Mechanics, Pearson Education,
6. Hibler and Gupta (2010),Engineering Mechanics (Statics, Dynamics) by Pearson Education
7. Reddy Vijaykumar K. and K. Suresh Kumar(2010), Singer‟s Engineering Mechanics
8. Bansal R.K.(2010), A Text Book of Engineering Mechanics, Laxmi Publications
9. Khurmi R.S. (2010), Engineering Mechanics, S. Chand & Co.
10. Tayal A.K. (2010), Engineering Mechanics, Umesh Publications
62
Semiconductor Devices Lab
EEN351
L T P CR Final Marks : 35
0 0 21 Class Work : 15
Duration of Exam: 3 Hrs Total : 50
List of Experiments
1. Study and plot of VI Characteristics of PN junction diode.
2. Study and plot of VI Characteristics of Zener diode.
3. Study and plot of Common Base(CB) Configuration characteristics of transistor.
4. Study and plot of Common Emitter (CE) configuration characteristics of transistor.
5. Study of Common Collector (CC) amplifier as a buffer.
6. Study and verification of Zener diode as a voltage regulator.
7. Study and plot output waveform of half and full wave rectifier.
8. Study and plot output waveform of clipper and clamper circuit.
9. Study of 3-terminal IC regulator.
10. Study of LED, photo diode and solar cell.
11. Study and plot response of FET common source amplifier.
12. Study and plot of FET common Drain amplifier.
COURSE OUTCOMES:
 Understand the characteristics of PN junction diode.

 Understand the application of diode & Zener diode experimentally.
 Obtain input and output characteristics of transistors in CE, CB & CC configurations.
 Plot and analyse FET characteristics.
 Write experimental reports and work in a team in professional way.
63
Digital Electronics Lab
EEN352
List of Experiments
1. Study of TTL gates – AND, OR, NOT, NAND, NOR, EX-OR, EX-NOR.
2. Design & realize a given function using K-maps and verify its performance.
3. To verify the operation of multiplexer & Demultiplexer.
4. To verify the operation of comparator.

5. To verify the truth tables of S-R, J-K, T & D type flip flops.
6. To verify the operation of bi-directional shift register.
7. To design & verify the operation of 3-bit synchronous counter.
8. To design and verify the operation of synchronous UP/DOWN decade counter using J K flip-
flops & drive a seven-segment display using the same.
9. To design and verify the operation of asynchronous UP/DOWN decade counter using J K flip-
flops & drive a seven-segment display using the same.
10. To design & realize a sequence generator for a given sequence using J-K flip-flops.
11. Study of CMOS NAND & NOR gates and interfacing between TTL and CMOS gates.
12. Design a 4-bit shift-register and verify its operation. Verify the operation of a ring counter and
a Johnson counter.
13. To realize the given function using decoder and OR gate.
COURSE OUTCOME:
On the successful competition of this course, the students should be able to:
• Verify the operation of basic & universal gates and Design & verification of combinational
circuits.
• Verify the operations of different type of flip flops.
• Design the counters using flip flops for a given sequence.
• Verify the working of shift registers.
• Write experimental reports and work in a team in professional way
64
Circuit Analysis and Synthesis Lab
EEN353
List of Experiments
1. Transient response of RC circuit.
2. Transient response of RL circuit.
3. To find the resonance frequency, Band width of RLC series circuit.
4. To calculate and verify ―Z" parameters of a two port network.
5. To calculate and verify "Y" parameters of a two port network.
6. To determine equivalent parameter of parallel connections of two port network.
7. To plot the frequency response of low pass filter and determine half-power frequency.
8. To plot the frequency response of high pass filters and determines the half-power frequency.
9. To plot the frequency response of band-pass filters and determines the band-width.
10. To calculate and verify "ABCD" parameters of a two port network.
11. To synthesize a network of a given network function and verify its response.
12. Introduction of P-Spice
COURSE OUTCOMES:
 Design RC & RL circuits and check their transient response and frequency response
experimentally.
 Analyse the circuits of two port network and verify ABCD,‘Z‘ & Y‘ parameters of two port
network.
 Design & plot the frequency response of low pass filter, high pass filter & band-pass filter
experimentally.
 Write experimental reports and work in a team in professional way.
65
Electronics Project Workshop-I
ES301
List of Problems
1. Testing of Electronics Devices
i) Diode ii) Transformer iii) Capacitors iv) Inductor
2. Design, Fabrication, Testing & Measurement of half & full wave rectifier
3. Design and fabrication of fixed & variable regulators (Zenes, Transistor and IC)
4. Design of transistor as a switch, amplifier and multivibrator.
5. To study of 555 as Astable, Monostable, Bistable multivibrator.
6. To design various applications of OP amp such as
1) Amplifiers (Inverting & Non Inverting)
2) Adder, Subtractor & scale changer
3) Integrator and differentiator
4) Oscillator and Schmitt trigger
7. Mini project based on anolog circuits of above.
COURSE OUTCOME:
On the successful competition of this course, the students should be able to:
• Test various electronics component and devices
• Verify the operations of different type semiconductor devices.
• Design different types of multivibrators using 555 Timer.
• design different circuits using OP-Amps
• Write experimental reports and work in a team in professional way
66
Semester IV
Syllabus
67
B.TECH 2nd YEAR ELECTRONICS ENGINEERING (SEMESTER –IV)
COURSE STRUCTURE
Marks
L T P
Communication
Systems
Circuits
Instrumentation

Algorithms
6 BSC BSC01 Biology 2 1 0 3 25 75 100
lab
Circuits lab
Instrumentation lab
Waves lab
Workshop-II
17 2 14 26 240 660 900
68
Principle of Communication Systems
EEN401
L T P CR Theory 75
Course Objectives:
 To learn about the basics of communication systems and different types of signal used for
communication.
 To understand the Amplitude modulation and its different types.
 To describe the concept of Angle modulation.
 To understand digital modulation and different digital modulation techniques.
 To introduce the students about noise.
Syllabus
UNIT 1: INTRODUCTION TO COMMUNICATION SYSTEMS:

The essentials of a Communication system, modes and media‘s of Communication,
Classification of signals
UNIT2: AMPLITUDE MODULATION:

Amplitude modulation, Generation of AM waves, Demodulation of AM waves, DSBSC,
Generation of DSBSC waves, Coherent detection of DSBSC waves, single side band
modulation, generation of SSB waves, demodulation of SSB waves, vestigial sideband
modulation (VSB).
UNIT3: ANGLE MODULATION:

Basic definitions: Phase modulation (PM) & frequency modulation (FM), narrow band
frequency
modulation, wideband frequency modulation, generation of FM waves, Demodulation of FM
waves.
UNIT4: PULSE MODULATION:

Sampling theory, pulse amplitude modulation (PAM), pulse time modulation., Elements of
pulse code modulation, Quantization, Uniform & nonuniform Quantization, Necessity of
nonuniform quantization, A law of Companding, µ law of companding, Quantization error in
PCM, transmission BW of PCM, Differential Pulse Code Modulation, Delta Modulation,
Adaptive Delta Modulation, TDM, FDM.
UNIT5: DIGITAL MODULATION TECHNIQUES:

ASK, Generation and detection of ASK, FSK Generation and detection of FSK, BPSK ,
Generation & detection of BPSK, QPSK, generation and detection of QPSK, DPSK, M-ary
PSK.
69
UNIT6: INTRODUCTION TO NOISE:
External noise, internal noise, S/N ratio, noise figure, noise temperature.
COURSE OUTCOMES:
After studying this course, the students are be able to
 Understand the basics of communication systems and different types of signal used for
communication.
 Describe and understand the Amplitude modulation and its different types.
 Explain and analyse the concept of Angle modulation.
 Learn the concept of Digital modulation and different digital modulation techniques.
 Introduce the concept of noise and its effect on communication systems

1. Communication systems (4th edn.): Simon Haykins; John wiley & sons.
2. Communication systems: Singh & Sapre; TMH.
3. Electronic Communication systems: Kennedy; TMH.
4. Communication Electronics: Frenzel; TMH.
5. Communication system: Taub & Schilling; TMH.
6. Communication systems: Bruce Carlson.
70
Analog Electronics Circuits
ECP 402
L T P CR Theory 75
Course Objectives:
 To Describe the basic concept of Diode and its application
 To understand the basic concepts of transistor and its circuits
 To explore the concepts of FET and its circuit
 To understand the concepts of various types of amplifier and their efficiency.
 To learn about oscillators and its various types.
 To understand Operational amplifier and design its linear & nonlinear applications.
Syllabus
Unit 1: DIODE CIRCUITS
P-N junction diode, V-I characteristics of a diode; review of halfwave and full-wave rectifiers,
Zener diodes, clamping and clipping circuits, voltage multiplier circuits.
Unit 2: BJT & BIASING CIRCUITS

Structure and V-I characteristics of a BJT, BJT as an amplifier, common-emitter, common-base
and common collector amplifiers; Analysis of transistor amplifier circuits using h parameters.
Biasing: operating point, bias stability, stability factor, and different biasing methods.
Unit 3: FET CIRCUITS

Junction field effect transistor, pinch off voltage, V-I characteristics, small signal model,
common source amplifier, source follower, biasing of FET, application of FET as VVR.
Unit 4: MULTI-STAGE AND POWER AMPLIFIERS

Frequency response of an amplifier, R C coupled amplifier, low frequency response of RC
coupled amplifier, various classes of operation (Class A, B, AB, C etc), their power efficiency.
Unit 5:OSCILLATORS
Review of the basic concept, Barkhausen criterion, RC oscillators (Phase Shift, Wein Bridge),
LC oscillators (Hartley, Colpitt, Clapp), non-sinusoidal oscillators.
Unit 6: OPERATIONAL AMPLIFIER

Ideal and practical operational amplifier, inverting and non inverting amplifier, differential
amplifier, offset error: voltage and current, common mode rejection ratio (CMRR).
Unit 7:LINEAR & NONLINEAR APPLICATIONS OF OP-AMP

Scale changer, phase shifter, adder, subtractor, integrator, differentiator, comparators, schimitt
trigger, zero crossing detector, active filters, precision rectifier.
COURSE OUTCOMES:
 Analyse and solve different circuits using Diodes
 Understand the concepts of transistor and analyse various applications of Transistors
 Evaluate the concepts of FET and its circuits.
71
 Implement the concept of transistor for different types of amplifiers and oscillators
 Understand basics of Operational amplifier and design its circuits for linear and non linear
applications.

1. Integrated Electronics: MilmanHalkias,TMH.
2. Operational Amplifiers: Gaikwad,PHI
3. Electronic Circuit Analysis and Design ( Second edition) : D.A.Neamen;TMH
4. Integrated Circuits: K RBotkar.
5. Linear Integrated Circuits : D R Chaudhary(WEL).
6. Electronics Devices & Circuits: Boylestad&Nashelsky ;Pearson
72
Measurements and Instrumentation
EEN402
L T P CR Theory 75
Course Objectives
 To understand the fundamentals of various types of Instruments.
 To understand the principle, working and applications of voltmeter, AC, DC Meters. Digital
Voltmeters
 To introduce the principle, working and applications of signal analysers
 To introduce the principle, working and applications of various types of AC and DC
bridges.
 To introduce the principle, working and applications of oscilloscopes
 To introduce the principle, working and applications different types of transducers
Syllabus
UNIT I: Introduction
Block Schematics of Measuring Systems, Performance Characteristics, Static Characteristics,
Accuracy, Precision, Resolution, Types of Errors. Gaussian Error, Root Sum Squares formula.
Dynamic Characteristics, Repeatability. Reproducibility. Fidelity, Lag; Measuring Instruments:
DC Voltmeters, D'Arsonval Movement. DC Current Meters, AC Voltmeters and Current
Meters. Ohmmeters, Multimeters, Meter Protection, Extension of Range, True RMS
Responding Voltmeters, Specifications of Instruments.
UNIT 2: Electronic Voltmeters, Multimeters, AC, DC Meters. Digital Voltmeters:

Electronic Voltmeters, Multimeters, AC, DC Meters. Digital Voltmeters: Ramp Type, Staircase
Ramp, Dual slope_ Integrating type, Successive Approximation Type, Auto ranging, 31/2, 33/4
Digit display, Pico ammeter, High Resistance Measurements, Low Current Ammeter,
Applications; Signal Generators: AF, RF Signal Generators. Sweep frequency Generators,
Pulse and Square wave Generators, Function Generators. Arbitrary waveform Generator, Video
signal Generators, Specifications.
UNIT 3: Signal Analyzers:

Signal Analyzers: AF, HF Wave Analyzers. Harmonic Distortion, Heterodyne wave Analyzers,
Spectrum Analyzers, Power Analyzers, Capacitance-Voltage Meters, Oscillators.
UNIT 4: DC and AC Bridges:

DC and AC Bridges: Wheat stone Bridge. Kelvin Bridge, AC Bridges, Maxwell, Hay,
Sobering, Wien, Anderson Bridges, Resonance Bridge. Similar Angle Bridge. Wagner’s'
ground connection. Twin T, Bridged T Networks, Detectors.
UNIT 5: Oscilloscopes:
Oscilloscopes: CRT, Block Schematic of CRO, Time Base Circuits, Lissajous Figures, CRO
Probes. High Frequency CRO Considerations. Delay lines. Applications, Specifications.
Special purpose oscilloscopes: Dual Trace, Dual Beam CROs. Sampling oscilloscopes. Storage
oscilloscopes. Digital Storage CROs. Frequency Measurement, Period Measurement, Errors in
73
Time/Frequency measurements, universal counters. Extension of range: Recorders: Strip-Chart.
X-Y. Oscillographic recorders.
UNIT 6: Transducers and Measurement of Physical Parameters:

Transducers: Classification, Strain gauges, Bonded, unbounded; Force and Displacement
Transducers. Resistance Thermometers. Hotwire Anemometers, LVDT, Thermocouples,
Special Resistance Thermometers, Digital Temperature sensing system. Piezoelectric
Transducers, Variable Capacitance Transducers. Magneto strictive Transducers. Measurement
of Physical Parameters: Flow Measurement. Displacement Meters, Liquid level Measurement,
Measurement of Humidity and Moisture, Velocity, Force, Pressure - High Pressure, Vacuum
level, Temperature -Measurements, Data Acquisition Systems.
COURSE OUTCOMES:
 Understand different parameters effecting performance of measuring instruments.
 Use different types of voltmeter, multimeter, AC, DC meter.
 Understand working and application of signal analyser
 Determine the circuit parameters using AC and DC bridges.
 Understand the principle, working and applications of various types of CROs
 Select transducers for the measurement of various electrical and physical quantities.
TEXT / REFERENCE BOOKS:

1. Electronic Measurements and Instrumentation - K. Lai Kishore, Pearson Education 2010.
2. Electronic Instrumentation: H.S.Kalsi -TMH, 2*Edition 2004.
3. Electronic instrumentation and measurement technique: W.D. Cooper & A.D. Helfrick Cooper
4. Electronic Instrumentation and Measurements - David A. Bell, Oxford Univ. Press, 1997.
5. Modern Electronic Instrumentation and Measurement Techniques: A.D. Helbincs. W.D.
Cooper, PHI Edition 2003.
6. Electronic Measurements and Instrumentation: B.M. Oliver, J.M. Cage TMH Reprint 2009.
7. Industrial Instrumentation: TR. Padmanabham Springer 2009.
8. A course in Electrical and Electronic measurement and instrumentation: A.K. Sawhney,
Dhanpat Rai Publication.
74
Electromagnetic Waves
ECC 02
L T P CR Theory 75
Course Objectives:
 To introduce the concept of Transmission line, no loss transmission and understanding the
concept of Smith Chart.
 To give exposure to the students regarding the physical meaning and importance of
Maxwell’s equation and how it derived from basic laws of Electromagnetic.
 To introduce how the Electromagnetic waves are formed, its propagation in different
medium and the concept of Poynting Vector.
 To introduce the phenomenon of Reflection or refraction of wave when strikes obliquely or
normally to any surface.
 To introduce the concept of travelling of wave in waveguides and other phenomena.
 To impart the knowledge of principle of radiation and radiation characteristics of an
antenna.
Syllabus
Unit 1: Transmission Lines: Equations of Voltage and Current on TX line, Propagation constant
and characteristic impedance, and reflection coefficient and VSWR, Impedance
Transformation on Loss-less and Low loss Transmission line, Power transfer on TX
line, Smith Chart, Admittance Smith Chart, Applications of transmission lines,
Impedance Matching, use transmission line sections as circuit elements.
Unit 2: Maxwell’s Equations- Basics of Vectors, Vector calculus, Basic laws of

Electromagnetics, Maxwell's Equations, Boundary conditions at Media Interface.
Unit 3: Uniform Plane Wave: Uniform plane wave, Propagation of wave, Wave polarization,
Poincare’s Sphere, Wave propagation in conducting medium, phase and group velocity,
Power flow and Poynting vector, Surface current and power loss in a conductor
Unit 4: Plane Waves at a Media Interface: Plane wave in arbitrary direction, Reflection and
refraction at dielectric interface, Total internal reflection, wave polarization at media
interface, Reflection from a conducting boundary.
Unit 5: Wave propagation in parallel plane waveguide, Analysis of waveguide general approach,
Rectangular waveguide, Modal propagation in rectangular waveguide, Surface currents
on the waveguide walls, Field visualization, Attenuation in waveguide.
Unit 6: Radiation: Solution for potential function, Radiation from the Hertz dipole, Power
radiated by hertz dipole, Radiation Parameters of antenna, receiving antenna, Monopole
and Dipole antenna,
75
COURSE OUTCOMES:
 Understand characteristics and wave propagation on high frequency transmission lines as
well as carryout impedance transformation on TL.
 Use sections of transmission line sections for realizing circuit elements.
 Characterize uniform plane wave and calculate reflection & transmission of waves at media
interface.
 Analyze wave propagation on metallic waveguides in modal form.
 Understand principle of radiation and radiation characteristics of an antenna.
 R.K. Shevgaonkar, Electromagnetic Waves, Tata McGraw Hill India, 2005.
 E.C. Jordan & K.G. Balmain, Electromagnetic waves & Radiating Systems, Prentice Hall,
India.
 Narayana Rao, N: Engineering Electromagnetics, 3rd ed., Prentice Hall, 1997.
 David Cheng, Electromagnetics, Prentice Hall.
76
Data Structure and Algorithms
EEN 403
L T P CR Theory 75
Course Objectives:
 To study in detail the concept of Loops, Conditional statements, Arrays, Functions,
structures, file handling file concepts, file organization
 To understand link list, Header Link list, Multiway link list and perform various data
structure operations.
 To learn the concept of stack and Queues and implement the same using array and link list
form.
 To implement Binary Trees type and implement the same in array and link list form.
 To study the Graphs using set, linked and matrix representation.
 To understand and implement file handling concepts.
Syllabus
Unit 1: Overview, Flow of Control, Input output functions, Arrays and Structures, Functions.
Unit 2: Data structures and Algorithms an overview: concept of data structure, choice of right
data structures, types of data structures, basic terminology Algorithms, how to design
and develop an algorithm, Analysis of an Algorithm, Asymptotic Notations, Time-Space
trade off
Unit 3: Arrays Operations Defined: traversal, selection, searching, insertion, deletion, and
sorting, Multidimensional arrays, Searching: Linear search, Recursive and Non
recursive binary Search. Sorting: Selection sort, Bubble sort, Insertion sort, Merge sort,
Quick sort, Shell sort, Heap sort
Unit 4: Stacks and queues: Stacks, array representation of stack, Applications of stacks,
Queues, Circular queues, array representation of Queues, Deque, priority queues,
Applications of Queues.
Unit 5:Linked Lists: Concept of a linked list, Circular linked list, doubly linked list, operations
on linked lists. Concepts of header linked lists. Applications of linked lists, linked
stacks, linked Queues.
Unit 6: Tree and Graphs: Trees: Introduction to trees, binary trees, representation and traversal
of trees, operations on binary trees, types of binary trees, threaded binary trees, B Trees,
Application of trees. Graphs: Introduction, terminology, set, linked and matrix
representation, Graph traversal techniques: BFS, DFS, operations on graphs, Minimum
spanning trees, Applications of graphs.
Unit 7: File Handling and Advanced data Structure: Introduction to file handling, Data and
Information, File concepts, File organization, files and streams, working with files.
AVL
77
trees, Sets, list representation of sets, applications of sets, skip lists
COURSE OUTCOMES:
 Understand the programming of one computer language from basic to advance level.
 Implement the Concept of link list, stack, queue, binary tree its usage in real life.
 Describe the Working of binary trees and graph with their applications.
 Understand the concept of files and their organization of memory.
REFERENCE/TEXT BOOKS:
1. Data Structures using C by A. M. Tenenbaum, Langsam, Moshe J. Augentem, PHI Pub.
2. Data Structures using C by A. K. Sharma, Pearson
3. Data Structures and Algorithms by A.V. Aho, J.E. Hopcroft and T.D. Ullman, Original
edition, Addison-Wesley, 1999, Low Priced Edition.
4. Fundamentals of Data structures by Ellis Horowitz & SartajSahni, Pub, 1983,AW
5. Fundamentals of computer algorithms by Horowitz Sahni and Rajasekaran.
6. Data Structures and Program Design in C By Robert Kruse, PHI,
7. Theory & Problems of Data Structures by Jr. SymourLipschetz, Schaum‗s outline by
TMH.
8. Introduction to Computers Science -An algorithms approach , Jean Paul Tremblay,
Richard B. Bunt, 2002, T.M.H.
78
Biology
BSC01
L T P CR Theory 75
Course Objectives:
 To convey that Biology is as important a scientific discipline as Mathematics, Physics and
Chemistry.
 “Genetics is to biology what Newton‟s laws are to Physical Sciences”,
 all forms of life have the same building blocks and yet the manifestations are as diverse as
one can imagine,
 without catalysis life would not have existed on earth,
 molecular basis of coding and decoding (genetic information) is universal and that
 fundamental principles of chemical and physical energy transactions are the same in
physical/chemical and biological world.
Syllabus
Module 1:(2 hours)- Introduction
Purpose: To convey that Biology is as important a scientific discipline as Mathematics,

Physics and Chemistry. Bring out the fundamental differences between science and
engineering by drawing a comparison between eye and camera, Bird flying and
aircraft. Mention the most exciting aspect of biology as an independent scientific
discipline. Why we need to study biology? Discuss how biological observations of
18th Century that lead to major discoveries. Examples from Brownian motion and
the origin of thermodynamics by referring to the original observation of Robert
Brown and Julius Mayor. These examples will highlight the fundamental importance
of observations in any scientific inquiry.
Module 2: (3 hours)- Classification
Purpose: To convey that classification per se is not what biology is all about. The
underlying criterion, such as morphological, biochemical or ecological be
highlighted. Hierarchy of life forms at phenomenological level. A common
thread weaves this hierarchy Classification.
Discuss classification based on
a) cellularity- Unicellular or multicellular
b) ultrastructure- prokaryotes or eucaryotes
c) Energy and Carbon utilization -Autotrophs, heterotrophs, lithotropes
d) Ammonia excretion – aminotelic, uricoteliec, ureotelic
e) Habitata- acquatic or terrestrial
f) Molecular taxonomy- three major kingdoms of life.
A given organism can come under different category based on classification. Model organisms
for the study of biology come from different groups. E.coli, S.cerevisiae, D. Melanogaster, C.
elegance, A. Thaliana, M.musculus
79
Module 3: (4 hours)-Genetics
Purpose: To convey that “Genetics is to biology what Newton‟s laws are to Physical
Sciences” Mendel‟s laws, Concept of segregation and independent assortment.
Concept of allele.Gene mapping, Gene interaction, Epistasis. Meiosis and
Mitosis be taught as a part of genetics. Emphasis to be give not to the mechanics
of cell division nor the phases but how genetic material passes from parent to off
spring. Concepts of recessiveness and dominance. Concept of mapping of
phenotype to genes. Discuss about the single gene disorders in humans. Discuss
the concept of complementation using human genetics.
Module 4:(4 hours)-Biomolecules
Purpose To convey that all forms of life has the same building blocks and yet the
manifestations are as diverse as one can imagine Molecules of life. In this
context discuss monomeric units and polymeric structures. Discuss about sugars,
starch and cellulose. Amino acids and proteins. Nucleotides and
DNA/RNA.Two carbon units and lipids.
Module 5: (4 Hours). Enzymes
Purpose: To convey that without catalysis life would not have existed on earth
Enzymology: How to monitor enzyme catalyzed reactions. How does an enzyme
catalyze reactions. Enzyme classification .Mechanism of enzyme action. Discuss
at least two examples. Enzyme kinetics and kinetic parameters. Why should we
know these parameters to understand biology? RNA catalysis.
Module 6: (4 hours)- Information Transfer
Purpose: The molecular basis of coding and decoding genetic information is universal
Molecular basis of information transfer. DNA as a genetic material. Hierarchy of
DNA structure- from single stranded to double helix to nucleosomes. Concept of
genetic code. Universality and degeneracy of genetic code. Define gene in terms
of complementation and recombination.
Module 7:(5 hours). Macromolecular analysis
Purpose: How to analyses biological processes at the reductionistic level Proteins

structure and function. Hierarch in protein structure. Primary secondary, tertiary
and quaternary structure. Proteins as enzymes, transporters, receptors and
structural elements.
Module 8: (4 hours)- Metabolism
Purpose: The fundamental principles of energy transactions are the same in physical and
biological world. Thermodynamics as applied to biological systems. Exothermic
and endothermic versus endergonic and exergoinc reactions. Concept of Keq
and its relation to standard free energy. Spontaneity. ATP as an energy currency.
This should include the breakdown of glucose to CO2 + H2O (Glycolysis and
Krebs cycle) and synthesis of glucose from CO2 and H2O (Photosynthesis).
Energy yielding and energy consuming reactions. Concept of Energy charge
80
Module 9: (3 hours)- Microbiology
Purpose: Concept of single celled organisms. Concept of species and strains. Identification
and classification of microorganisms. Microscopy, Ecological aspects of single
celled organisms. Sterilization and media compositions. Growth kinetics.
COURSE OUTCOMES
1. Classify enzymes and distinguish between different mechanisms of enzyme action.
2. Identify DNA as a genetic material in the molecular basis of information transfer.
3. Analyze biological processes at the reductionist level
4. Apply thermodynamic principles to biological systems.
5. Identify and classify microorganisms.

1. Biology: A global approach: Campbell, N. A.; Reece, J. B.; Urry, Lisa; Cain, M,
L.;Wasserman, S. A.; Minorsky, P. V.; Jackson, R. B. Pearson Education Ltd
2. Outlines of Biochemistry, Conn, E.E; Stumpf, P.K; Bruening, G; Doi, R.H., John Wiley
and Sons
3. Principles of Biochemistry (V Edition), By Nelson, D. L.; and Cox, M. M.W.H. Freeman
and Company
4. Molecular Genetics (Second edition), Stent, G. S.; and Calender, R.W.H. Freeman and
company, Distributed by Satish Kumar Jain for CBS Publisher
5. Microbiology, Prescott, L.M J.P. Harley and C.A. Klein 1995. 2nd edition Wm, C. Brown
Publishers
81
Communication Systems Lab
EEN451
List of Experiments
1. Study of Amplitude Modulation and determination of Modulation index.

2. Study of Frequency Modulation and determination of Modulation index.
3. Study of Phase Modulation.
4. Study of Pulse Amplitude Modulation.
5. Study of Pulse Width Modulation.
6. Study of Pulse Frequency Modulation.
7. Study of Pulse Code Modulation (PCM)
8. Study of Frequency Shift Keying (FSK)
9. Study of Amplitude Shift Keying (ASK)
10. Study of Pulse Shift Keying (PSK).
11. Study of Delta modulation
COURSE OUTCOMES:
 Demonstrate about various blocks in communication system.
 Analyze the types of modulations.
 Analyze and design the analog modulator and demodulator circuits.
 Generate the waveforms of AM,FM, PM, PWM,PPM and PAM.
 Calculate Power relations in Amplitude and Frequency modulated waves.
 Write experimental reports and work in a team in professional way
82
Analog Electronics Circuits Lab
ECP452
List of Experiments
1. Study of Half wave & Full wave rectifiers.
2. Study of Diode as clipper and clamper.
3. Study of CE amplifier for voltage, current & Power gains and input, output impedances
4. Study of CC amplifier as a buffer
5. Design & realize inverting amplifier, non-inverting and buffer amplifier using 741 OP
AMP.
6. Verify the operation of a differentiator circuit using 741 OP-AMP and show that it acts
as a high pass filter.
7. Verify the operation of a integrator circuit using 741 OP-AMP and show that it acts as a
low pass filter.
8. Design and verify the operations of OP-AMP adder and subtractor circuits.
9. Design and realize Wein-bridge oscillator using op amp741
10. To design & realize Schmitt trigger using op amp741.
11. To design & realize square wave generator using op amp741.
12. To design & realize zero crossing detector using op amp741
COURSE OUTCOMES:
1. Understand the operation of half wave & full wave rectifier.
2. Understand the application of diode experimentally.
3. Understand the transistor as an amplifier.
4. Implement amplifiers, differentiator, Integrator and active filters circuit using OP-AMP.
Design op-amp as Wein-Bridge Oscillator, Square Wave Generator, Schimtt trigger and
zero crossing detector.
5. Write experimental reports and work in a team in professional way.
83
Measurement and Instrumentation Lab
EEN452
List of Experiments
1. To measure unknown frequency using CRO by Lissajous pattern

2. Find the value of unknown resistance using Wheatstone Bridge.
3. To find value of unknown resistance using Kelvin Double Bridge
4. To study AC bridges (Hay‘s bridge, Maxwell bridge, Schering bridge)
5. To measure unknown frequency using CRO by Lissajous pattern
6. To determine output characteristics of LVDT and measure displacement using LVDT
7. To study characteristics and measurement of temperature using thermocouple/ thermistor/ RTD
8. Measurement of displacement using strain Gauge based displacement transducer
9. Measurement of displacement using magnetic pickup.
10. To study differential pressure transducer & signal conditioning of output signal.
11. Measurement of level using capacitive transducer.
12. To study of distance measurement using ultrasonic transducer.
COURSE OUTCOMES:
 Measure Resistance /capacitance/ Inductance using ACX and DC bridges.
 Understand working and application of signal analyser
 Understand working principle and applications of CRO.
 Selection and application of transducers for the measurement of various electrical and
physical quantities.
84
Electromagnetic Waves Lab
ECC52
List of experiments
1. To study the microwave Test Bench.
2. To study and plot V-I characteristics of Gunn diode and to determine the threshold
voltage.
3. To study and plot characteristics of the reflex klystron tube and to determine its
electronic tuning range.
4. To study EMFT/ transmission line trainer kit ME 1200 and RF analyser.
5. To measure voltage at different points of transmission line using experimental Kit

ME 1200 when its far end is properly terminated.

ME 1200 when its far end is open circuited.

ME 1200 when its far end is short circuited.
8. To calculate Voltage Standing Wave Ratio of a transmission line using experimental

kit ME 1200, when the far end is open circuited.
9. To calculate Voltage Standing Wave Ratio of a transmission line using experimental

kit ME 1200, when the far end is short circuited.
10. Introduction to Impedance Transformation Using Single-Stub Transmission Line

Networks.
COURSE OUTCOMES:
 Learn microwave test bench and different components used for microwaves.
 Determine threshold voltage of Gunn diode and electronic Tuning range of Reflex
klystron.
 Use the Vector analyser and experimental kit ME1200 for different applications of
Transmission line.
 Measure Voltage, current and standing wave ratio of transmission line when it is
properly terminated, short circuited and open circuited.
85
Electronics Project Workshop-II
ES402
Total : 100
List of Problems
1. Fabrication of all the gates using Diode & transistors and verification of truth table.
2. To design & realize combinational circuit using K-map & logic simplification.
3. To design 4 bit parallel adder/ subtractor/ for unsigned/ signed numbers.
4. To verify the operation of Multiplexer & to implement any given function with a MUX.
5. To verify the operation of DEMUX & decoder.
6. To indentify common cathode & common anode of seven segment display with its various
Segment.
7. Implement binary to BCD conversion.
8. To fabricate BCD to seven segment decoder
9. To verify the truth table of SR, JK, D & T Flip-Flop & conversion of one Flip-Flop to another FF.
10. To design Mod-8 Synchronous Counter using T Flip-Flop.
11. To design UP-DOWN decade counter using JK/T Flip-Flop & derive o/p into SSD.
12. To design a minute clock.
13. To verify the function of Universal Shift Register.
14. To design Ring & Johson counter using Universal shift Register.
15. To verify the function of RAM.
16. To verify the function of 4- bit ALU.
17. To study the operation of 8-bit A/D converter.
18. To design 4 bit DAC.

19. Mini project based on concepts of digital electronics.
Course outcomes: On successful completion of this course, the students should be able to:
 Design and analyze combinational logic circuits.
 Design & analyze synchronous sequential logic circuits.
 Acquire basic knowledge of memories and ALU.
 Understand the A/D and D/A converter.
86

Syllabus

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

Syllabus

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Syllabus

Uploaded by

Copyright:

Available Formats

SCHEME & SYLLABUS

DEPARTMENT OF ELECTRONICS ENGINEERING

J.C. BOSE UNIVERSITY OF SCIENCE AND

J.C. Bose University of Science and Technology, YMCA Faridabad, aspires to be a

To be a Centre of Excellence for producing high quality engineers and scientists

 To frame a well-balanced curriculum with an emphasis on basic theoretical

 To motivate students to develop innovative solutions to the existing problems for

 Collaboration with the industry, research establishments and other academic

 To promote research in emerging and interdisciplinary areas and act as a facilitator

1. To prepare students to excel in undergraduate programmes and succeed in industry/

2. To provide students with a solid foundation in mathematical, scientific and

3. To provide students with foundation in skill development required to design, develop

4. To inculcate in students professional and ethical attitude, effective communication

5. To provide student with an academic environment aware of excellence, outstanding

PROGRAMME SPECIFIC OUTCOMES (PSOs)

Marks % Grade Grade points Category

Percentage calculation= CGPA * 9.5

General, Course structure & Theme

1 Hr. Lecture (L) per week 1 credit

B. Course code and definition:

Course code Definitions

BASIC SCIENCE COURSES

HUMANITIES & SOCIAL SCIENCES INCLUDING MANAGEMENT

I. Mandatory Induction Program

Physics (Waves and

TOTAL 9 2 15 18.5 165 435

(3) Additional 3 credits per year to be earned through MOOCs

3 BSC 102 Chemistry 3 1 - 4 25 75 BEC

ESC106 Workshop- II - 4 2 30 70 BEC

5 HSMC101 English 2 - - 2 25 75 BEC

7 BSC 105 Chemistry Lab - - 3 1.5 15 35 BEC

8 HSMC102 English Lab - - 2 1 15 35 BEC

(3) Additional 3 credits per year to be earned through MOOCs

2 PCC ECP302 Semiconductor Devices 3 0 0 3 25 75 100

3 PCC ECC01 Signal and Systems 3 0 0 3 25 75 100

4 PCC ECP305 Circuit Analysis and 3 0 0 3 25 75 100

5 BSC BS301 Mathematics-III 3 1 0 4 25 75 100

8 PCC EEN351 Semiconductor Devices 0 0 2 1 15 35 50

9 PCC EEN352 Digital Electronics Lab 0 0 2 1 15 35 50

10 PCC EEN353 Circuit Analysis and 0 0 2 1 15 35 50

11 PROJ ES301 Electronics Project 0 0 6 3 30 70 100

(3) Additional 3 credits per year to be earned through MOOCs

5 PCC EEN403 Data Structures and 3 1 0 4 25 75 100

(3) Additional 3 credits per year to be earned through MOOCs

(i) Physics (Waves and Optics)( [L : 3; T:1; P : 0 (4 credits)]

Note: Experiments may be added or deleted as per the availability of equipment.

Module 5: Matrices (10hours): Inverse and rank of a matrix,rank-nullity theorem; System of

Scheme L T P Credit Semester – I

Engineering Graphics Software; -Spatial Transformations; Orthographic Projections; Model

Module 1: Introduction to Engineering Drawing covering,

– Plain, Diagonal and Vernier Scales;

Module 2: Orthographic Projections covering

Module 3: Projections of Regular Solids covering

Module 5: Isometric Projections covering,

Unit 1: Introduction to Programming (4 lectures) Introduction to components of a computer

Idea of Algorithm: steps to solve logical and numerical problems. Representation

Unit 2: Arithmetic expressions and precedence (2 lectures) Conditional Branching and

(ii) Laboratory - Programming for Problem Solving[ L : 0; T:0 ; P : 4 (2credits)] Tutorial 1: