Gayatri

Mobile: +91-8790182955 ◊ E-Mail:[email protected]

◊VALIDATION ENGINEER◊

PROFESSIONAL SNAPSHOT

• An astute professional with 3 years of experience as Verification & Validation engineer in Automotive
• Experience in Verification and Validation on Automotive Electronics like Instrument CLUSTER,
BODY CONTROL MODULES & ADAS ECU
• Good experience in testing of Body Control Module, Requirement analysis, Test scenarios creation,
and Defect tracking and configuration management tools.
• Experience in HIL (Hardware in Loop) Level testing in open- loop and closed-loop simulators like
dSPACE HIL
• Have good knowledge of HIL System in Automotive domain.
• Skilled in driver information systems, CAN Communication.
• Experience in complete STLC (Software Test Life Cycle)
• Have Proficient experience in Manual and functional aspects of the Web based Applications on
multiplelevels of SDLC and Testing Life Cycle (STLC).
• Documented Detailed Test Cases that described the steps needed and the expected results.
• Preparing Daily Status report.
• Executed test cases and verified actual results against expected results.
• Good knowledge and experience about universal automotive test tools, CANoe, CANalyzer
• Experience in writing and performing Technical Reviews for Test cases.
• Good understanding of Vehicle Networks and System
• System Test and Functional Test Plan generation and execution.
• A flexible professional who enjoys learning new skills and quickly adapt to organizational changes.
• Good on CAPL.scripting.and ‘C’ language.
• Good understanding of Test case Design Techniques.
• Good understanding of gateway and Engine ECUS.
• Experience in Embedded Testing of Automotive products.
• Hands on Requirements management tools like IBM Doors.
• Hands on MS Word , MS Excel , MS PowerPoint
• Overview on V&V Cycle &Good debugging skills.
 WORK EXPERINCE

• Currently working as VALIDATION ENGINEER in Renault & Nissan Automotive(Client)

Project-3:SWEET 400 BCM HIL Validation

Operating System Windows XP, windows 7

Description
The scope of the project is to Verify & Validate the BCM Functionalities using Hil & Mil using
CAPL Script
Responsibilities:
• To test all the functionalities of BCM
• Preparing the Test Cases.
• Executing the scripts.
• Root cause analysis for failure Test Cases.
• Preparation of Test Bench for Integrating ECU’s.
• System Test Plan Preparation.
• Preparing system documentation for each feature to improve technical skill.
• Diagnostic functionality testing
• System Testing and Test Report Preparation
• Flashing the software in all systems of vehicle, taking logs and DTC analysis.

Project-2: Validation of Gateway Ecu and supplier Ecu Functionalities

Operating System Windows XP, windows 7

Description
The scope of the project is to functional and message routing from gateway to supplier ecu and from
supplier ecu to gateway which in turn send the response to remote client ecu. Remote client ecu supports
UDS protocol , gateway ecu performs according to supplier ecu.

Responsibilities:
• To test all the functionalities of supplier ecu.
• Preparing the Test Cases.
• Executing the scripts.
• Root cause analysis for failure Test Cases.
• Preparation of Test Bench for Integrating ECU’s.
• System Test Plan Preparation.
• Diagnostic functionality testing
• System Testing and Test Report Preparation
• Flashing the software in all systems of vehicle, taking logs and DTC analysis.

Project-1: BCM Validation & Verification on HIL Bench setup

Operating System Windows XP, windows 7

Description
The scope of the project is to do set up the HIL test Bench and Integrating Body ECU’. The input signals
for target control unit is given from the HILS (Hardware-In-Loop System). The HILS is controlled by
using Simulink models. Logic addition or modification of system for ECU’s is confirmed manually. After
logic confirmation, Endurance test is done on control unit for confirmation of data settings. Testing
Environment for testing of logic check and endurance test is also done for every test function.
Responsibilities:
• To test all the functionalities of Body Control Module.
• Preparing the Test Cases.
• Executing the scripts.
• Root cause analysis for failure Test Cases.
• Requirement analysis for BCM ECU’s.
• System Test Plan Preparation.
• Diagnostic functionality testing
• GUI preparation for BODY ECU’s for easily manipulating signals.
• System Testing and Test Report Preparation
• Flashing the software in all systems of vehicle, taking logs and DTC analysis.

EDUCATION

• Diploma of Electronics and Communication Engineer ( 2019)

DECLARATION

I do hereby declare that the information given above is true to the best of my knowledge.