Approval

Customer : SONY DATE : 19 Mar. 2007

SAMSUNG
SAMSUNG TFT-LCD
TFT-LCD

MODEL
MODEL :: LTY[Z]400HA01
LTY[Z]400HA01
Any Modification of Specification is not allowed without SEC's Permission.

NOTE :

APPROVAED BY DATE
Customer’s Approval 19 Mar,2007

SIGNATURE DATE PREPARED BY DATE

19 Mar,2007

SL Development Team, LCD Business

Samsung Electronics Co . , LTD.

MODEL LTY400HA01 Doc. No 05- 000- S- 070319 Page 1 / 31

 Contents

Revision History -------------------------------------------------------------------------------------------- (3)

General Description --------------------------------------------------------------------------------------- (4)
General Information --------------------------------------------------------------------------------------- (4)
1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5)
2. Optical Characteristics --------------------------------------------------------------------------------- (6)
3. Electrical Characteristics ------------------------------------------------------------------------------- (9)
3.1 TFT LCD Module
3.2 Back Light Unit
4. Block Diagram ------------------------------------------------------------------------------------------- (11)
5. Input Terminal Pin Assignment --------------------------------------------------------------------- (12)
5.1 Input Signal & Power
5.2 Balance Board
5.3 LVDS Interface
5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color
6. Interface Timing ---------------------------------------------------------------------------------------- (20)
6.1 Timing Parameters (DE only mode)
6.2 Timing Diagrams of interface Signal (DE only mode)
6.3 Power ON/OFF Sequence
7. Outline Dimension -------------------------------------------------------------------------------------- (23)
8. EMI Specification --------------------------------------------------------------------------------------- (25)
9. Spread Spectrum Specification
10. UL Approval
11. Reliability Test ----------------------------------------------------------------------------------------- (26)
12. Packing ------------------------------------------------------------------------------------------------ (27)
13. Marking & Others ------------------------------------------------------------------------------------- (28)
14. General Precaution ---------------------------------------------------------------------------------- (29)
14.1 Handling
14.2 Storage
14.3 Operation
14.4 Operation Condition Guide
14.5 Others

MODEL LTY400HA01 Doc. No 05- 000- S- 070319 Page 2 / 31

* Revision History

Rev.
Date Page Summary
No
Mar.
19, 000 - First Issued
2007

MODEL LTY400HA01 Doc. No 05- 000- S- 070319 Page 3 / 31

General Description
Description
LTY[Z]400HA01 is a color active matrix liquid crystal display (LCD) that uses amorphous
silicon TFT(Thin Film Transistor) as switching components. This model is composed of a
TFT LCD panel, a driver circuit and a back light unit. The resolution of a 40.0“ is 1920 x
1080 and this model can display up to 1.07 billion colors with wide viewing angle of 89°or
higher in all directions. This panel is intended to support applications to provide a excellent
performance for Flat Panel Display such as Home-alone Multimedia TFT-LCD TV, Display
terminals for AV application products, and High Definition TV (HDTV).

Features
RoHS compliance (Pb-free)
1.07 billion(True-10Bit) Color Support
High contrast ratio, high aperture ratio, fast response time
SPVA (Super Patterned Vertical Align) mode
Wide viewing angle (±89° )
Full HD (1920 x 1080 pixels) resolution (16:9)
Low Power consumption
20 High color gamut CCFTs (Cold Cathode Fluorescent Tube)
DE(Data Enable) mode
Mini-LVDS (Mini Low Voltage Differential Signaling) interface

General Information

Items Specification Unit Note

952.0(HTYP) x 551.0(VTYP) ±1.0mm
Module Size mm
54.2(DMAX)
Weight 11300(Max) g
Pixel Pitch 046125(H) x 0.15375(W)*3 mm
Active Display Area 885.6(H) x 498.15(V) mm
Surface Treatment DSLR(3H)

Display Colors 1.07 billion(True-10Bit) colors

Number of Pixels 1920 x 1080 pixel

Pixel Arrangement RGB vertical stripe

Display Mode Normally Black

Luminance of White (550) * cd/m2 Refer to Page 6

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 4 / 31

1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.

Item Symbol Min. Max. Unit Note

Power Supply Voltage VDD GND-0.5 13 V (1)

Storage temperature TSTG -20 65 ℃ (2)

Operating Temperature TOPR 0 50 ℃ (2)
Panel surface temperature TSUR 0 65 ℃ (3)
Shock ( non - operating ) SNOP - 50 G (4)
Vibration ( non - operating ) VNOP - 1.5 G (5)
Note (1) Ta= 25 ± 2 ° C
(2) Temperature and relative humidity range are shown in the figure below.
a. 93.8 % RH Max. (Ta ≤40 ° C)
b. Maximum wet-bulb temperature at 40 ° C or less. (Ta ≤ 40 °
C)
c. No condensation
(3) Polarizer will not be damaged in this range, even though abnormal visual problems occur
in TSUR range.
(4) 11ms, sine wave, one time for ±X, ±Y, ±Z axis
(5) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis

Fig. Temperature and Relative humidity range

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 5 / 31

2. Optical Characteristics

The optical characteristics should be measured in a dark room or equivalent.

Measuring equipment : TOPCON BM-7,SPECTRORADIOMETER SR-3
(Ta = 25 ± 2°
C, VDD=12V, fv= 60Hz, fDCLK=148.5MHz, Dim = 90%)
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast Ratio (3)
C/R (1000)* 1700 -
(Center of screen) SR-3
Rising Tr - 10 13
Response Falling Tf - 6 7 (5)
msec
Time BM-7
G-to-G
Tg - 8 -
[AVE]
Luminance of White Normal (6)
YL (450)* (550)* - cd/m2
(Center of screen) L,R=0 SR-3
U,D=0
Rx 0.650
Red
Ry Viewing 0.324
Angle
Gx 0.216
Green
Color Gy 0.664
TYP. TYP. (7),(8)
Chromaticity
Bx -0.03 0.148 +0.03 SR-3
(CIE 1931)
Blue
By 0.064
Wx 0.274
White
Wy 0.274
(7)
Color Gamut - - 90 - %
SR-3
Color Temperature - - 11800 - K (7)
Gamma γ - 2.2 - SR-3

L 79 89 -
Hor.
Viewing R 79 89 - (8)
C/R≥10 Degree
Angle 79 89 - SR-3
U
Ver.
D 79 89 -
Brightness Uniformity (4)
Buni - - (30)* %
(9 Points) SR-3
* marked Items will be decided after taking data of early mass production.

Note (1) Test Equipment Setup

The measurement should be executed in a stable, windless and dark room between
40min and 60min after lighting the back light at the given temperature for stabilization
of the back light. This should be measured in the center of screen.

Single lamp current @ IL = 8.6 mArms(typ.), Dim = 90%

Environment condition : Ta = 25 ± 2 °C

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 6 / 31

 Photo detector
Photo detector Field

SR-3 1°
BM-7 2° Field

SR-3 : 50㎝
BM-7 : 50㎝

TFT - LCD Module

LCD Panel

The center of the screen

Note (2) Definition of test point

320 960 1600

Active Area
180 ⑨ ⑧ ⑦
Test Point
540 ⑥ ⑤ ④

900 ③ ② ①

Note (3) Definition of Contrast Ratio (C/R)

: Ratio of gray max (Gmax) & gray min (Gmin) at the center point ⑤ of the panel

G max
C/R
G min
Gmax : Luminance with all pixels white
Gmin : Luminance with all pixels black

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 7 / 31

 Note (4) Definition of 9 points brightness uniformity

( B max B min)
Buni 100
B max
Bmax : Maximum brightness
Bmin : Minimum brightness

Note (5) Definition of Response time : Sum of Tr, Tf

Display data Black (data off) White (data on) White (data off)

TR TF
Optical Instruments
100%
Response
90%

10%
0%
TIME

Note (6) Definition of Luminance of White : Luminance of white at center point ⑤

Note (7) Definition of Color Chromaticity (CIE 1931)

Color coordinate of Red, Green, Blue & White at center point ⑤

Note (8) Definition of Viewing Angle

: Viewing angle range (C/R ≥10)

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 8 / 31

 3. Electrical Characteristics

3.1 TFT LCD Module

The connector for display data & timing signal should be connected.
Ta = 25°
C ±2 °
C
Item Symbol Min. Typ. Max. Unit Note
Voltage of Power Supply VDD 11 12 13 V (1)
(a) Black - 800 - mA
Current
of Power (b) White IDD - 1000 1100 mA (2),(3)
Supply
(c) Mosaic - 900 - mA
Vsync Frequency fV 48 60 62 Hz
Hsync Frequency fH 50 67.5 75 kHz
Main Frequency fDCLK 130 148.5 155 MHz
Rush Current IRUSH - - 3 A (4)

Note (1) The ripple voltage should be controlled under 10% of VDD.
(2) fV=60Hz, fDCLK = 148.5MHz, VDD = 12.0V, DC Current.
(3) Power dissipation check pattern (LCD Module only)
a) Black Pattern b) White Pattern c) Mosaic

(4) Measurement Conditions

VDD
100%
90%

10%
GND

TRUSH=1ms
Rush Current IRUSH can be measured when TRUSH. is1ms

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 9 / 31

 3.2 Back Light Unit

The back light unit contains 20 CCFTs ( Cold Cathode Fluorescent Tube ).
The characteristics of lamps are shown in the following tables.
Ta=25 ± 2°
C
Item Symbol Min. Typ. Max. Unit Note
Operating Life Time Hr 30,000 - - Hour (1)

Note (1) It is defined as the time to take until the brightness reduces to 50% of its original value.
[Operating condition : Ta = 25±2℃ , IL = 8.6 mArms(typ.), For single lamp only. ]

Socket

HOT 1

HOT 2

Balance LCD
Board Module

HOT 19

HOT 20

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 10 / 31

 4. Block Diagram

G
GA
ATE
TE Dr
Dr.. II CC
T-Con
SSC
SSC (54CH
(54CH)X )X44
T-Con
LV
LVDS +
DS + m
mi i nini
UU
SER LV DS
LVDS
SER CONN
CONN
ECTOR
ECTOR

DCC FPC DA
DATA
TA Dr
Dr..II CC
DCC M
MEMOO
EMRY
RY
(576CH
(576CH)X )X55
DC/DC
DC/DC CONN
COVV
ERTER
ERTER

DC/DC
DC/DC CONN
COVV
ERTER
ERTER
SOURCE 400HA PANEL
PCB 1920 x 1080 x RGB
DC/DC
DC/DC CONN
COVV
ERTER
ERTER

GG
AA
MM
MAA
M GG
EN
EN

VV
on/of
on/offf GG
EN
EN
FPC DA
DATA
TA Dr
Dr..II CC
(576CH
(576CH)X )X55
CONTROL VV
COM
CO -G
M EN
-G EN
DATA R-STRI NG +FB
R-STRI NG +FB
VI N(12. 0V)
AVDD
Von/Vof f
SOURCE
VCOM
PCB
ΥVol t age CONTROL PCB
VCC(1. 8V)
VCC(2. 5V) G
GA
ATE
TE Dr
Dr.. II CC
VCC(3. 3V) (540CH
(540CH)X )X44

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 11 / 31

5. Input Terminal Pin Assignment
5.1. Input Signal & Power Connector : Connector : FI-RE51S-HF(JAE)
PIN No. Signal Description PIN No. Signal Description
1 Power VDD 26 RE[0]P Even LVDS Signal +
2 Power VDD 27 RE[1]N Even LVDS Signal -
3 Power VDD 28 RE[1]P Even LVDS Signal +
4 Power VDD 29 RE[2]N Even LVDS Signal -
5 Power VDD 30 RE[2]P Even LVDS Signal +
6 GND GND 31 GND GND
7 GND GND 32 RECLK- Even LVDS Clock-
8 GND GND 33 RECLK+ Even LVDS Clock+
9 GND GND 34 GND GND
10 RO[0]N Odd LVDS Signal - 35 RE[3]N Even LVDS Signal -
11 RO[0]P Odd LVDS Signal + 36 RE[3]P Even LVDS Signal +
12 RO[1]N Odd LVDS Signal - 37 RE[4]N Even LVDS Signal -
13 RO[1]P Odd LVDS Signal + 38 RE[4]P Even LVDS Signal +
14 RO[2]N Odd LVDS Signal - 39 GND GND
15 RO[2]P Odd LVDS Signal + 40 SCL I2C SCL
16 GND GND 41 SDA I2C SDA
17 ROCLK- Odd LVDS CLK - 42 N.C N.C.
18 ROCLK+ Odd LVDS CLK + 43 B-INT Bus Release
19 GND GND 44 ACC SEL ACC On/Off
20 RO[3]N Odd LVDS Signal - 45 DCC SEL0
DCC Select Bit
21 RO[3]P Odd LVDS Signal + 46 DCC SEL1
22 RO[4]N Odd LVDS Signal - 47 LUT SEL0
DCC Look-up
23 RO[4]P Odd LVDS Signal + 48 LUT SEL1
Table Select
24 GND GND 49 LUT SEL2
25 RE[0]N Even LVDS Signal - 50 T-Con Ready T-Con Ready Check
51 SEL0 SEC Internal Use Only

■ ACC SEL - HIGH : ACC OFF LOW/OPEN : ACC ON

■ B-INT : I2C BUS RELEASE

L/OPEN SDA/SCL LINE BECOME HI-Z

H USER CAN ACCESS EEPROM

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 12 / 31

 ■ DCC SELECTION

DCC SELECT BIT 0

0 1

0 DCC2 ON DCC1 ON
SELECT
BIT 1 1 DCC OFF DCC OFF

■ DCC Look Up Table Selection

Pin N.O. 49 48 47 Description

0 0 0 -

0 0 1 60Hz*175%

0 1 0 -

Select 0 1 1 60Hz*50%
bit 1 0 0 -

1 0 1 50Hz*175%

1 1 0 -

1 1 1 50Hz*50%

■ TCON Ready

Operation Description

Low High Normal Operation

High Low Error Operation

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 13 / 31

 Note(1) Pin number starts from Right side

PCB
▼

Pin No. 1 Pin No. 51

#1 #51

connect name

#1 #51

Fig. Connector diagram

a. All GND pins should be connected together and also be connected to the LCD’s
metal chassis.
b. All power input pins should be connected together.
c. All NC pins should be separated from other signal or power.

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 14 / 31

 5.2. Balance Board

5.2.1 Recommended Operation Condition

Recommendation
Item Symbol Unit Note Remark
Min. Typ. Max.
Inverter Switching
FOP 53 55 57 kHz
Frequency Frequency
Dimming
FDIM 150 160 170 Hz
Frequency
Dim Duty
DPWM 20 - 100 % Bright Control
Ratio
Striking
HVSTRIKE 4200 - - Vrms (1)
Voltage

Note
Asymmetric ratio of Total Input Current must less than 10 % ( | IP – I-P | / ( Irms@T < 0.1)
Crest factor must be from 90 % to 110 % ( 0.9 < IP / Irms@T/2 X √2 < 1.1)

(1) Striking Voltage( HVSTRIKE ) based on CCFL spec. for ambient temperature.
Soft rising time must be
- at starting time Tsoft > 300msec
- at PWM dimming condition Trise < 100usec

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 15 / 31

 5.2.2 Balance Board Input Pin Configuration

1.HV Input : MDF51SU-2P-13V(22) (HIROSE)

PIN NO. SYMBOL REMARK

1 HV2 Power Supply for CCFL
2 HV1 Power Supply for CCFL

2.HV Input : BM03B-XASS-TF(LF)(SN) (JST)

PIN NO. SYMBOL REMARK

1 HV1 Power Supply for CCFL
2 NC NC
3 HV1 Power Supply for CCFL

3.HV Input : BM03B-XASS-TF(LF)(SN) (JST)

PIN NO. SYMBOL REMARK

1 HV2 Power Supply for CCFL
2 NC NC
3 HV2 Power Supply for CCFL
4 NC NC

4. Feed Back Interface : KN30-5P-1.25H (HIROSE)

PIN NO. SYMBOL REMARK
1 Vcc 12V
2 FB Current Feedback Signal

3 GND GND
4 OLP Open Lamp Protection
5 LD Lamp Detection

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 16 / 31

5.2.3 Feedback I/O Specification

Recommendation
ITEM SYMBOL UNIT REMARKS
Min. Typ. Max.

Supply Voltage VCC 11 12 15 V Lamp

Input crrent at Recommended

IOC 1 4 10 mA
Of Vcc Load Condition

High
Vcc-1 - -
(Normal)
Lamp
VLD V @Vcc = 12 [V]
Detection Low
- - 1
(LD)

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 17 / 31

 5.3 LVDS Interface

LVDS pin Odd Data Even Data

TxIN/RxOUT0 R4 R4

TxIN/RxOUT1 R5 R5

TxIN/RxOUT2 R6 R6

TxOUT/RxIN0 TxIN/RxOUT3 R7 R7

TxIN/RxOUT4 R8 R8

TxIN/RxOUT6 R9 R9

TxIN/RxOUT7 G4 G4

TxIN/RxOUT8 G5 G5

TxIN/RxOUT9 G6 G6

TxIN/RxOUT12 G7 G7

TxOUT/RxIN1 TxIN/RxOUT13 G8 G8

TxIN/RxOUT14 G9 G9

TxIN/RxOUT15 B4 B4

TxIN/RxOUT18 B5 B5

TxIN/RxOUT19 B6 B6

TxIN/RxOUT20 B7 B7

TxIN/RxOUT21 B8 B8

TxOUT/RxIN2 TxIN/RxOUT22 B9 B9

TxIN/RxOUT24 HSYNC HSYNC

TxIN/RxOUT25 VSYNC VSYNC

TxIN/RxOUT26 DEN DEN

TxIN/RxOUT27 R2 R2

TxIN/RxOUT5 R3 R3

TxIN/RxOUT10 G2 G2

TxOUT/RxIN3 TxIN/RxOUT11 G3 G3

TxIN/RxOUT16 B2 B2

TxIN/RxOUT17 B3 B3

TxIN/RxOUT23 RESERVED RESERVED

TxIN/RxOUT28 R0 R0

TxIN/RxOUT29 R1 R1

TxIN/RxOUT30 G0 G0

TxOUT/RxIN4 TxIN/RxOUT31 G1 G1

TxIN/RxOUT32 B0 B0

TxIN/RxOUT33 B1 B1

TxIN/RxOUT34 RESERVED RESERVED

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 18 / 31

5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color
DATA SIGNAL
GRAY
RED GREEN BLUE
COLOR DISPLAY SCALE
R R R R R R R R R R G G G G G G G G G G B B B B B B B B B B
LEVEL
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -
BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 -
GREEN 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 -
BASIC CYAN 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
COLOR RED 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -
MAGENTA 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 -
YELLOW 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 -
WHITE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -
BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R0

DARK 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1

GRAY ↑ 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R2
SCALE : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
R3~R1020
OF : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
RED ↓ 1 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1021
LIGHT 0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1022
RED 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1023
BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G0

DARK 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G1

GRAY ↑ 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G2
SCALE : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
G3~G1020
OF : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
GREEN ↓ 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 G1021
LIGHT 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 G1022
GREEN 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 G1023
BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 B0

DARK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 B1

GRAY ↑ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 B2
SCALE : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
B3~B1020
OF : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
BLUE ↓ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 1 1 B1021
LIGHT 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 B1022
BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 B1023

Note) Definition of Gray :

Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level)
Input Signal : 0 = Low level voltage, 1 = High level voltage

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 19 / 31

 6. Interface Timing

6.1 Timing Parameters ( DE only mode )

SIGNAL ITEM SYMBOL MIN. TYP. MAX. Unit NOTE

Clock 1/TC 130 148.5 155 MHz -

Hsync Frequency FH 50 67.5 75 KHz -

Vsync FV 48 60 62 Hz -
Active
Display TVD - 1080 - lines -
Vertical Period
Display Term
Vertical
TVB 1100 1125 1480 Lines -
Total
Active
Display THD - 1920 - clocks -
Horizontal Period
Display Term
Horizontal
TH 2000 2200 2450 clocks -
Total

Note) This product is DE only mode. The input of Hsync & Vsync signal does
not have an effect on normal operation.
(1) Test Point : TTL control signal and CLK at LVDS Tx input terminal in system
(2) Internal VDD = 3.3V

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 20 / 31

 6.2 Timing diagrams of interface signal ( DE only mode )

TV

TVD TVB

DE

TH

THD

DE

DCLK
TC

DATA
SIGNALS

TC
TCH TCL

DCLK 0.5
VCC

TDS TDH

DISPLAY 0.5
DATA
VCC

TES

DE 0.5
VCC

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 21 / 31

6.3 Power ON/OFF Sequence

To prevent a latch-up or DC operation of the LCD Module, the power on/off

sequence should be as the diagram below.

0.9 VDD 0.9 VDD

0.1 VDD 0.1 VDD

0V
1<T1≤10msec
0<T2≤35msec
0<T3≤50msec T1 T3
1000msec≤T4
T2 T4

VALID
0V
Power On Power Off

1000msec≤T5 T5 T6
(Recommend Value)
100msec≤T6 50% 50%
(Recommend Value)
0< T7 ≤ T5-10ms

T7 T-con Ready
0V

T1 : VDD rising time from 10% to 90%

T2 : The time from VDD to valid data at power ON.
T3 : The time from valid data off to VDD off at power Off.
T4 : VDD off time for Windows restart
T5 : The time from valid data to B/L enable at power ON.
T6 : The time from valid data off to B/L disable at power Off.
T7 : The time from Vin to T-Con Ready

The supply voltage of the external system for the Module input should be the same
as the definition of VDD.
Apply the lamp voltage within the LCD operation range. When the back light turns on
before the LCD operation or the LCD turns off before the back light turns off,
the display may momentarily show abnormal screen.
In case of VDD = off level,
please keep the level of input signals low or keep a high impedance.
T4 should be measured after the Module has been fully discharged between power off
and on period.
Interface signal should not be kept at high impedance when the power is on.

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 22 / 31

7. Outline dimension (Front view)

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 23 / 31

Outline dimension (Rear View)

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 24 / 31

8. EMI Recommendation
: -3dB at CISPR22 Class B
This EMI Recommendation is recommended to be measured at SET Condition.

9. Input Spread Spectrum Specification

Modulation Rate Modulation Frequency Modulation Frequency

(Max.) (Min.) (Max.)
Input
±1.2% 50KHz 200Khz
Signal

10. UL Approval

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 25 / 31

11. Reliability Test
Item Test condition Quantity

Temperature
0 50 ,10Cycle determination 4EA
Step Stress

HTOL 50 , 1000hr (500hr determination) 8EA

LTOL 0 , 1000hr (500hr determination) 4EA
RTOL 20 , continue ~ 4EA
HTS 70 , 1000hr (500hr determination) 4EA
LTS -30 ,1000hr (500hr determination) 4EA
THB 40 / 95%RH,1000hr (500hr determination) 4EA
WHTS 60 / 75%RH, 1000hr (500hr determination) 4EA
T/C -20 ~ 60 , 200cycle (100cycle determination) 4EA

ESD
10 kV,200 /100 ,9Point,3times/Point 3EA
(non-operation)

Samsung condition :
contact : 8 kV ,150 /330 ,100Point,1 time/Point
non-contact : 15 kV,150 /330 ,100Point,1 time/Point
ESD(operation) 3EA
Sony condition :
contact : 8 kV ,200 /100 ,100Point,1 time/Point
non-contact : 15 kV,200 /100 ,100Point,1 time/Point

Input Con. ESD contact : 2kV,200 /100,Input Con.Pin,3 times/Pin 3EA

POWER
30sec (on) / 30sec(off) : 12,000 times 4EA
ON/OFF

Vibration 10~300Hz/1.5G/10minSR, XYZ, 30min/axis 3EA

Shock SEC condition : 11msec, XY Z 1time/axis 50G 3EA

PALLET
1.146 Grms, 2~200Hz, Random, Z axis 1Hr 1PALLET(10EA)
Vibration

PALLET Drop 20cm, Bottom, Front, Rear 1times 1PALLET(10EA)

[ Result Evaluation Criteria]

Under the display quality test conditions with normal operation state, these shall
be no change which may affect practical display function.

HTOL/ LTOL : High/Low Temperature Operating Life,

THB : Temperature Humidity Bias
HTS/LTS : High/Low Temperature Storage
WHTS : Wet High Temperature Storage

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 26 / 31

 12. PACKING

12.1 CARTON (Internal Package)

(1) Packing Form
Corrugated fiberboard box and corrugated cardboard as shock absorber
(2) Packing Method

Packing Pallet Box

Module (10EA)
Cushion Set

Direction be able to Open

Pallet
12.2 Packing Specification

Item Specification Remark

1. 113Kg/LCD(10ea)
2. 7kg/Cushion Set(2ea)
LCD Packing 10 ea / (Packing-
3. 6.7kg/Packing-Pallet Box(1ea)
Pallet Box)
4. Cushion Material : EPS
5. Packing Pallet Box Material : DW4
Pallet 1 Box / Pallet Pallet weight : 8kg
Packing Direction Vertical -

Total Pallet Size H x V x height 1150mm(H) x 985mm(V) x 609mm(Height)

Pallet(8kg) + Module( 11.3 x 10 = 113kg) +

Total Pallet Weight 134.7kg
Cushion(7kg) + Pallet-BOX(6.7kg)

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 27 / 31

13. MARKING & OTHERS

A nameplate bearing followed by is affixed to a shipped product at the specified

location on each product.
(1) Parts number : LTY[Z]400HA01
(2) Revision: One letters
(3) Lot number : X X X X XXX XX X

Cell Position No. (In the Glass)

Glass No. (In the one Lot)
Lot No. (Glass)
Month
Year (Note1)
Product code
(4) Nameplate Indication Line

Week code : 05 29
LTY[Z]400HA01
week
year
40mm
XXXXX XXXXXXXXXX xxx
X
Revision code
Lot number
LTY[Z]400HA01XXX

80mm
(5) Packing box attach

100mm
LTY[Z]400HA01 Part number

XXXX Revision code

10

Box serial number

0703
(6) Others
1. After service part
Lamps cannot be replaced because of the narrow bezel structure.

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 28 / 31

14. General Precautions
14.1 Handling

(a) When the Module is assembled, it should be attached to the system firmly
using all mounting holes. Be careful not to twist and bend the Module.

(b) Because the inverter use high voltage, it should be disconnected from power
before it is assembled or disassembled.

(c) Refrain from strong mechanical shock and / or any force to the Module.
In addition to damage, this may cause improper operation or damage to the Module
and CCFT back light.

(d) Note that polarizers are very fragile and could be damage easily.
Do not press or scratch the surface harder than a HB pencil lead.

(e) Wipe off water droplets or oil immediately. If you leave the droplets for a long
time, staining or discoloration may occur.

(f) If the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth.

(g) Desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane.

Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid
or Methyl chloride. It might permanent damage to the polarizer due to chemical
reaction.

(h) If the liquid crystal material leaks from the panel, it should be kept away
from the eyes or mouth . In case of contact with hands, legs or clothes, it must
be washed away with soap thoroughly.

(i) Protect the Module from static, or the CMOS Gate Array IC would be damaged.

(j) Use finger-stalls with soft gloves in order to keep display clean during the
incoming inspection and assembly process.

(k) Do not disassemble the Module.

(l) Do not pull or fold the lamp wire.

(m) Do not adjust the variable resistor located on the Module.

(n) Protection film for polarizer on the Module should be slowly peeled off just before use
so that the electrostatic charge can be minimized.

(o) Pins of I/F connector should not be touched directly with bare hands.

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 29 / 31

 14.2 Storage

(a) Do not leave the Module in high temperature, and high humidity for a long time.
It is highly recommended to store the Module with temperature from 0 to 35℃
and relative humidity of less than 70%.

(b) Do not store the TFT-LCD Module in direct sunlight.

(c) The Module should be stored in a dark place. It is prohibited to apply sunlight or
fluorescent light in storing.

14.3 Operation

(a) No Connection or disconnect the Module in the "Power On" condition.

(b) Power supply should always be turned on/off by the "Power on/off sequence"

(c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference should be done by system manufacturers. Grounding and shielding methods
may be important to minimize the interference.

(d) The cable between the back light connector and its inverter power supply should
be connected directly with a minimized length. A longer cable between
the back light and the inverter may cause lower luminance of lamp(CCFT) and
may require higher startup voltage(Vs).

14.4 Operation Condition Guide

(a) The LCD product should be operated under normal conditions.

Normal condition is defined as below;
- Temperature : 20±15℃
- Humidity : 55±20%
- Display pattern : continually changing pattern (Not stationary)

(b) If the product will be used in extreme conditions such as high temperature,
humidity, display patterns or operation time etc.., It is strongly recommended
to contact SEC for Application engineering advice. Otherwise, its reliability and
function may not be guaranteed. Extreme conditions are commonly found at
Airports, Transit Stations, Banks, Stock market, and Controlling systems.

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 30 / 31

 14.5 Others

(a) Ultra-violet ray filter is necessary for outdoor operation.

(b) Avoid condensation of water. It may result in improper operation or disconnection

of electrode.

(c) Do not exceed the absolute maximum rating value. ( supply voltage variation,
input voltage variation, variation in part contents and environmental temperature,
and so on)
Otherwise the Module may be damaged.

(d) If the Module keeps displaying the same pattern for a long period of time,
the image may be "sticked" to the screen.
To avoid image sticking, it is recommended to use a screen saver.

(e) This Module has its circuitry PCB's on the rear side and should be handled
carefully in order not to be stressed.

(f) Please contact SEC in advance when you display the same pattern for a long time.

MODEL LTY[Z]400HA01 Doc. No 05- 000- S- 070319 Page 31 / 31