EST Catalog u EST3 Life Safety Platform

Control Display
Modules
3-LDSM, 3-24x series, 3-12xx series,
3-6/3S1xxx series COA 6086

S3000

7165-1657:
0186/0193
Overview Standard Features
The EST3 Control Display modules provide the emergency user • Programmable LED flash rates
with the simplest of interfaces, lights and switch control. The Con-
• Membrane style tactile pushbuttons
trol Display modules install over local rail modules. The local rail
modules supply the power and drivers via a ribbon cable connec- • Software supported for toggle, and latching interlock switch action
tion to the control display modules. The displays mount over any • Slide in labels
local rail module maximizing the flexibility of design layout. When
a display module is required where no local rail module exists, • Lamp test
an LED Display Support Module 3-LDSM mounts to the local rail
providing support for one Control Display Module.
Surface mount technology used to minimize space, also reduces
the power requirements of display modules. Slide-in labels keep
the control display modules flexible and allow labeling for local
languages.
Module lamp test can be programmed to any spare control switch
or a local node lamp test is initiated by simultaneously operating
the Alarm Silence and Trouble Silence switches on the 3-CPU.

Page 1 of 4 D ATA S H E E T 85010-0055

Not to be used for installation purposes. Issue 6
Application Notes or “Off.” Programming of the switches to multiple relays keeps
operational design choices open. The user returns the system
Control Display Modules come in a variety of types providing op- control of the remote device to the Life Safety system by simply
erational flexibility. There are five types of display modules available pressing Auto. The Auto LED programs to its related switch and
with EST3. gives positive feed back to the user by turning on yellow when the
Typically alarm zone annunciation appears on any of the first four system has active control of remote devices.
module types shown. The first module supports simple zone Individual switch LEDs are also programmable. As an example the
annunciation; the second, zone annunciation with zone disable; “Open” or “On” LED (green) could program to follow its related
the third, alarm and trouble zone annunciation, the fourth alarm switch or, program to follow a remote monitor input and provide
and trouble zone annunciation with zone disable. From a simple positive feedback of the remote devices control status. If budget
one LED annunciation point to higher functionality, EST3 fills the restrictions prevent “sail type” positive feedback, EST’s unique
requirements. command processing satisfy requirements for positive feedback of
Simple Control Examples The fifth module is very adaptable HVAC control systems. Any switch command will send a signal to
to system requirements for audio the 3-CPU for processing. While in this state the LED associated
ON F or remote equipment control. with the switch will flash. Once the command has been received
a Each module contains 18 LEDs by a remote Signature Series Module, the module (since it is
n and 18 switches. Each group of intelligent with its own microprocessor) will issue a “Processed”
AUTO three switches has a latching- command back to the 3-CPU which will latch the LED associ-
# interlock to support operations ated with the switch “ON” steady. This same process is used for
5 that must be kept separated. The all audio speaker selections ensuring the circuit is connected. A
OFF
interlock is under software control variety of switch and associated LED colors are available to meet
so only one switch is active at a the demands of the specifiers application.
given time. EST3 software makes Life Safety Systems are generally passive requiring only occasional
meeting the wide variety of ap- operation. Yet, in an emergency the user must be able to identify
OPEN
plications needed with today’s system operation and status quickly and easily. LCD displays are
codes and building system opera- excellent for identifying specific information, but even a large LCD
Damper
AUTO tions easy. can not display overall “system” status as effectively as LEDs and
5th Flr
Switches. The EST3 Control Display modules are designed to pro-
vide simple identification and operation of system functions for the
CLOSE For fan control the emergency emergency user. They provide positive feedback of control activity
user assumes control of the with unrivaled selection of display configurations and mounting
remote device by selecting “On” location options.

Installation and Mounting Engineering Specification

The Life Safety system shall incorporate annunciation of Alarm,
Supervisory, Trouble and Monitor operations. Annunciation must
be through the use of LED display strips complete with a means to
custom label each LED as to its function. Where applicable control
of remote smoke control devices must be made available at the
control center. Switches with LEDs must provide positive feed
back to the operator of remote equipment status. Where voice au-
dio is required a means of paging individual zones must be made.
The status of each paging zone must be annunciated. It must be
possible to selectively page into specific zones. It shall be possible
to manipulate the evacuation of the building from the main control
center. It must be possible for the emergency operator to put
specific zones into evacuation manually.

Page 2 of 4 D ATA S H E E T 85010-0055

Not to be used for installation purposes. Issue 6
Technical Specifications
Catalog Number of Alarm
LED Colors Switches Applications
Number LEDs Current
3-LDSM N/A N/A N/A Provides interface for one Control Display Module 5 mA

Alarm Main
Electrical
Electrical Room Trouble Room

3-24R red Alarm Annunciation

3-24Y yellow Supervisory and Trouble Annunciation 2 mA base
3-24G 24 green 0 Monitor Annunciation + 1.5 mA per
12 red over 12 Red LEDs Alarm Annunciation Yellow LEDs Supervisory active LED
3-12RY
yellow pairs Annunciation

EVAC SHELTER
5th Floor
Message Message

3-12SR red Alarm Annunciation with enable/disable operation 2 mA base

3-12SY 12 yellow 12 Supervisory Annunciation with enable/disable operation + 1.5 mA per
3-12SG green Monitor Annunciation, Page select active LED

EVAC AMBER
5th Floor Strobe Strobe

3-12/S1GY 12 groups green/ yellow Zone Page select with Trouble Annunciation 2 mA base
3-12/S1RY of two w/ red/yellow 12 Alarm and Trouble Annunciation with enable/disable + 1.5 mA per
3-12/S2Y switch yellow/ yellow Supervisory and Trouble Annunciation with enable/disable active LED

ON OPEN D
A
AUTO AUTO M
P
E
OFF CLOSE R

2mA base
Green /Yellow 123 On-Auto-Off fan and Open-Auto-Close Damper Control with
3-4/3SGYWR 4 LEDs + 1.5mA
and White/Red switches Trouble and Normal LED indicators
per active LED

ALERT 5th ON A OPEN D

A
F H M
PAGE L AUTO AUTO
O U P

EVAC
O
R OFF #4 CLOSE
E
R

green/yellow /
3-6/3S1G2Y Six On-Auto-Off fan and Open-Auto-Close Damper Control 2 mA base
6 groups of yellow
groups of + 1.5 mA per
3 w/switch green/yellow /
3-6/3S1GYR three Page and Evacuation select with zone trouble active LED
red
Notes:
1) All Control Display Modules are UL and ULC listed.
2) All Control Display Modules mount over one Local Rail Module.
If no local rail module exists the 3-LDSM mounts to local rail
and supports one control display module.

Page 3 of 4 D ATA S H E E T 85010-0055

Not to be used for installation purposes. Issue 6
 Ordering Information
Catalog Shipping
Description
Number Weight
0.45lb
3-LDSM LED Display Support Module
Contact us... (.2kg)
Email: [email protected]
3-24R 24 Red LED Display Module
Web: www.est-fire.com 3-24Y 24 Yellow LED Display Module
3-24G 24 Green LED Display Module
EST is an EDWARDS brand.
3-12SR 12 switches with 12 Red LED Display/Control Module
1016 Corporate Park Drive
Mebane, NC 27302
3-12SY 12 switches with 12 Yellow LED Display/Control Module
3-12SG 12 switches with 12 Green LED Display/Control Module
In Canada, contact Chubb Edwards... 3-12RY 12 Red LED and 12 Yellow LED Display Module
Email: [email protected]
Web: www.chubbedwards.com 12 switches with one Green and one Yellow LED per switch Display/
3-12/S1GY
Control Module
© 2013 UTC Fire & Security Americas 12 switches with one Red and one Yellow LED per switch Display/ 0.35lb
Corporation, Inc. All rights reserved. 3-12/S1RY (.12kg)
Control Module
Specifications subject to change
without notice. Edwards is part of UTC 12 switches with two Yellow LEDs per switch Display/Control
3-12/S2Y
Climate, Controls & Security, a unit of Module
United Technologies Corporation. Six groups of three switches. Each switch with one LED. LEDs
3-6/3S1G2Y
provided Green, Yellow, Yellow.
12 switches in four groups of three switches, switch one with a green
3-4/3SGYWR LED, switch two with yellow and white LEDs and switch three with a
red LED
Six groups of three switches. Each switch with one LED. LEDs
3-6/3S1GYR
provided Green, Yellow, Red

06-27-13

Page 4 of 4 D ATA S H E E T 85010-0055

Not to be used for installation purposes. Issue 6