Trimec EM Lock

Electric Mortice Locks
Electromagnetic Locking Solutions
Z Series Single Non Monitored EML 56

Z Series Single Monitored EML 58
Z Series Double Non Monitored EML 60
Z Series Double Monitored EML 62
Z Series Recessed EML 64
Accessories 66
55
Z4 and Z8 Single Series Non Monitored
Electromagnetic Lock
General Description
The Single Series Electromagnetic Locks operate
with holding forces from 250kg up to 580kg.
Covering a range of applications the Z4 and
Z8 Electromagnets are ideal for applications from
Standard doors through to high use commercial
swing doors.
With fixing options including wood, aluminium

and steel constructions, as well as glass
door applications, the range caters to most
electromagnetic needs.
Z4 Electromagnetic Lock - Non Monitored
Key Features
• Fail-safe: unlocks when power is removed
• Easy installation: suitable for both new and
retrofit usage
• High holding force: refer to the technical
data overleaf
• Self-alignment: armature plate pivots to
accommodate door drop
• Silent operation: no humming or buzzing
• Dual voltage: site selectable 12 or 24 Vdc
Z8 Electromagnetic Lock - Non Monitored
• Instantaneous Release: smart electronics
on the Z Series Electromagnets eliminate
residual magnetism
Applications
• Aluminium doors
• Glass doors
• IT Storage rooms
Standards and Compliance
• Access control
Successfully fire rated up to 4hrs on fire door
• Surface mount for inswing and outswing doors 4 assemblies in accordance with AS1905.1. 2005
Hour
(Part 1: Fire resistant door sets)
CE Approved
C-Tick Certified
56 assaabloyopeningsolutions.com.au 2019-10
Z4 and Z8 Single Series Non Monitored
MOUNTING
PLATE
72.2
47.9 67.2
42.9 178.5 238
186 266
24.9 40
DOOR ARMATURE MAGNET

Z4 ELECTRO MAGNETIC LOCK ASSEMBLY
Typical Install for Z4 & Z8 out swinging doors. Z4 Electromagnetic Lock Z8 Electromagnetic Lock
Single Series Technical Information

Z4 Magnet Z8 Magnet
Holding Force 250kg – 280kg 550kg – 580kg
Dimensions* (L)238 x (H)48 x (D)27 mm (L)266 x (H)72 x (D)40 mm
Voltage 12Vdc/ 24Vdc ±10% 12Vdc/ 24Vdc ±10%
Current 450mA @ (12Vdc) 225mA @ (24Vdc) 512mA @ (12Vdc) 256mA @ (24Vdc)
Monitoring None None
Operating Temperature -10 to 55 Degrees -10 to 55 Degrees
Operating Humidity 0 - 95% 0 - 95%
Specification Statement Ordering Information

Holding force is measured directly between Product Description Part Number
armature and magnet, holding force on the door
may vary depending on the leverage created. Z4 Electromagnet - Non Monitored 770300-000T
The Single Series Electromagnetic Lock should Z8 Electromagnet - Non Monitored 770600-000T
be constructed in an aluminium case with heavy Accessories
duty electromagnet. The range only operates EMZ4 BRACKET SINGLE L & Z EMZ4B-SLZ
in fail safe mode and relies on a secondary lock or EMZ4 BRACKET GLASS U 12MM GLASS EMZ4B-GU
battery backup system. In some cases the magnet EMZ4 BRACKET GLASS ARMATURE EMZ4B-GA
armature plate pivots to accommodate door EMZ4 BRACKET ARMATURE NON MONITORED EMZ4B-AN
drop. The lock needs to be equipped with EMZ4 BRACKET SINGLE MOUNTING PLATE EMZ4B-SMP
“smart electronics” that have zero residual EMZ4 SPARE PART SCREW KIT EMZ4SP-SC
magnetism, (instantaneous release). This is EMZ8 BRACKET SINGLE L & Z EMZ4B-SLZ
crucial for correct operation. EMZ8 BRACKET GLASS U 12MM GLASS EMZ8B-GU
EMZ8 BRACKET GLASS ARMATURE EMZ8B-GA
EMZ8 BRACKET ARMATURE NON MONITORED EMZ8B-AN
EMZ8 BRACKET SINGLE MOUNTING PLATE EMZ8B-SMP
EMZ8 SPARE PART SCREW KIT EMZ8SP-SC
57
Z4 and Z8 Single Series Monitored
General Description
The Single Series Electromagnetic Locks operate

with holding forces from 250kg up to 580kg.
Covering a range of applications the Z4 and
Z8 Electromagnets are ideal for applications from
Standard doors through to high use commercial
swing doors.
With fixing options including wood, aluminium Z4 Electromagnetic Lock - Monitored

and steel constructions, as well as glass
door applications, the range caters to most
electromagnetic needs.
Key Features
retrofit usage
• High holding force: refer to the technical Z8 Electromagnetic Lock - Monitored
data overleaf
Standards and Compliance
• Monitoring: Reed Switch monitoring on all
models. Hall-Effect monitoring on Z4 and 4 assemblies in accordance with AS1905.1. 2005
Z8 models.
Hour
• Instantaneous release: smart electronics CE Approved

on the Z Series Electromagnets eliminate C-Tick Certified
residual magnetism
Monitoring
Hall / Bond Monitoring
This indicates that the lock is powered and
that the armature plate is in position and
magnetically bonded (it monitors if the magnet
is locked)
Reed switch monitoring

An integrated reed switch monitors the door
position separately (it monitors the position
of the door)
Applications
• Aluminium doors
• Glass doors
• IT Storage rooms
• Access control
• Surface mount for inswing and outswing doors
Z4 and Z8 Single Series Monitored
MOUNTING PLATE
72.2
47.9 67.2
42.9 178.5 238
186 266
DOOR ARMATURE MAGNET 24.9 40
Single Series Technical Information

Z4 Magnet Z8 Magnet
Current 450mA @ (12Vdc) 225mA @ (24Vdc) 512mA @ (12Vdc) 256mA @ (24Vdc)
Monitoring Hall-Effect/Bond sensing & Reed Switch Hall-Effect/Bond sensing & Reed Switch

armature and magnet, holding force on the door
may vary depending on the leverage created. Z4 Electromagnet - Monitored 770300-012T
The Single Series Electromagnetic Lock should Z8 Electromagnet - Monitored 770600-012T
be constructed in an aluminium case with heavy Accessories
duty electromagnet. The range only operates EMZ4 Bracket Single L & Z EMZ4B-SLZ
in fail safe mode and relies on a secondary lock or EMZ4 Bracket Glass U 12Mm Glass EMZ4B-GU
battery backup system. In some cases the magnet EMZ4 Bracket Glass Armature EMZ4B-GA
armature plate pivots to accommodate door EMZ4 Bracket Armature Monitored W/Magnet EMZ4B-AM
drop. The lock needs to be equipped with EMZ4 Bracket Single Mounting Plate EMZ4B-SMP
“smart electronics” that have zero residual EMZ4 Spare Part Screw Kit EMZ4SP-SC
magnetism, (instantaneous release). This is EMZ4 Spare Part Pcb Monitored EMZ4SP-PCBM
crucial for correct operation. EMZ8 Bracket Single L & Z EMZ4B-SLZ

EMZ8 Bracket Glass U 12Mm Glass EMZ8B-GU
EMZ8 Bracket Glass Armature EMZ8B-GA
EMZ8 Bracket Armature Monitored W/Magnet EMZ8B-AM
EMZ8 Bracket Single Mounting Plate EMZ8B-SMP
EMZ8 Spare Part Screw Kit EMZ8SP-SC
EMZ8 Spare Pcb Monitored EMZ8SP-PCBM
59
Z4 and Z8 Double Series Non Monitored
Z4 Double Electromagnetic Lock - Non Monitored
Z8 Double Electromagnetic Lock - Non Monitored
General Description Applications

The Double Series Electromagnetic Locks • Aluminium doors
operate with holding forces from 500kg up to • Double swing doors
1160kg. Covering a range of applications these
• Access control
magnets are ideal for applications from access
ways through to high use commercial swing • Surface mount for inswing and outswing doors
doors. With fixing options including wood,
aluminium and steel constructions, as well as Standards and Compliance
glass door applications, the range caters to
most electromagnetic needs. 4 assemblies in accordance with AS1905.1. 2005
Hour

Key Features
CE Approved
C-Tick Certified
retrofit usage
data overleaf
• Instantaneous release: smart electronics
on the electromagnets eliminate residual
magnetism.
Z4 and Z8 Double Series Non Monitored
24.6
47.9 39.4
42.9
72.2
67.2
DOOR FRAME
RUBBER 476
WASHER
532
MAGNET 9.5
26.1
24.9 29.7
DOOR Z4 DOUBLE ELECTRO MAGNETIC LOCK ASSEMBLY
ARMATURE 41.3
40
Typical Install for Z4 & Z8 out swinging doors.

Z4 Electromagnetic Lock Z8 Electromagnetic Lock
Z8 DOUBLE ELECTRO MAGNETIC LOCK
ASSEMBLY
Double Series Non Monitored

Z4 Magnet Z8 Magnet
Current 900mA @ 12Vdc 450mA @ 24Vdc 1024mA @ 12Vdc 512mA @ (12Vdc)
Monitoring None None

armature and magnet, holding force on the
door may vary depending on the leverage Z4 Double Electromagnet – Non Monitored 770300-100T
created. The Double Series Electromagnetic Z8 Double Electromagnet – Non Monitored 770600-100T
Lock should be constructed in an aluminium Accessories
case with heavy duty electromagnet. The range EMZ4 Bracket Double L & Z EMZ4B-DLZ
only operates in fail safe mode and relies on EMZ4 Bracket Armature Non Monitored EMZ4B-AN
a secondary lock or battery backup system. EMZ4 Bracket Double Mounting Plate EMZ4B-DMP
The lock needs to be equipped with “smart EMZ4 Spare Part Screw Kit EMZ4SP-SC
electronics” that have zero residual magnetism, EMZ8 Bracket Double L & Z EMZ8B-DLZ
(instantaneous release). This is crucial for EMZ8 Bracket Armature Non Monitored EMZ8B-AN
correct operation. EMZ8 Bracket Double Mounting Plate EMZ8B-DMP

61
Z4 and Z8 Double Series Monitored
Z4 Double Electromagnetic Lock - Monitored
Z8 Double Electromagnetic Lock - Monitored
General Description Applications

The Double Series Electromagnetic Locks • Aluminium doors
operate with holding forces from 500kg up to
• Double swing doors
1160kg. Covering a range of applications these
magnets are ideal for applications from access • Access control
ways through to high use commercial swing
• Surface mount for inswing and outswing doors
doors. With fixing options including wood,
aluminium and steel constructions, as well Monitoring
as glass door applications, the range caters Hall / Bond Monitoring
to most electromagnetic needs. This indicates that the lock is powered and
Key Features that the armature plate is in position and
magnetically bonded (it monitors if the magnet
• Fail-safe: unlocks when power is removed is locked)
Reed Switch Monitoring
retrofit usage
An integrated reed switch monitors the door
• High holding force: refer to the technical position separately (it monitors the position
data overleaf of the door)
• Self-alignment: armature plate pivots
to accommodate door drop Standards and Compliance
• Silent operation: no humming or buzzing Successfully fire rated up to 4hrs on fire door
4
Hour
assemblies in accordance with AS1905.1. 2005
• Dual voltage: site selectable 12 or 24 Vdc (Part 1: Fire resistant door sets)
CE Approved
• Monitoring; Hall-Effect and Reed Switch
monitoring on all models C-Tick Certified
• Instantaneous release: Smart electronics

on the Z Series electromagnets eliminate
residual magnetism.
Z4 and Z8 Double Series Monitored
24.6
47.9 39.4
42.9
72.2
67.2
DOOR FRAME
RUBBER 476
WASHER
532
MAGNET 9.5
26.1
24.9 29.7
DOOR
Z4 DOUBLE ELECTRO MAGNETIC LOCK ASSEMBLY
ARMATURE 41.3
40
Z8 DOUBLE ELECTRO MAGNETIC LOCK
ASSEMBLY
Double Series Monitored Technical Information

Z4 Magnet Z8 Magnet
Dimensions (L)476 x (H)48 x (D)27 mm (L)532 x (H)72 x (D)40 mm
Current 900mA @ 12Vdc 450mA @ 24Vdc 1024mA @ 12Vdc 512mA @ (12Vdc)
Monitoring Hall Effect / Bond sensing and Reed Switch Hall Effect / Bond sensing and Reed Switch

The Double Series Electromagnetic Lock should Product Description Part Number
be constructed in an aluminium base with
heavy duty electromagnet. The range only Z4 Double Electromagnet – Monitored 770300-112T
operates in fail safe mode and relies on Z8 Double Electromagnet – Monitored 770600-112T
a secondary lock or battery backup system. Accessories
The lock needs to be equipped with “smart EMZ4 Bracket Double L & Z EMZ4B-DLZ
electronics” that have zero residual magnetism, EMZ4 Bracket Armature Monitored W/Magnet EMZ4B-AM
(instantaneous release). This is crucial for EMZ4 Bracket Double Mounting Plate EMZ4B-DMP
correct operation. EMZ4 Spare Part Screw Kit EMZ4SP-SC
EMZ4 Spare Part Pcb Monitored EMZ4SP-PCBM
EMZ8 Bracket Double L & Z EMZ8B-DLZ
EMZ8 Bracket Armature Monitored W/Magnet EMZ8B-AM
EMZ8 Bracket Double Mounting Plate EMZ8B-DMP
EMZ8 Spare Pcb Monitored EMZ8SP-PCBM
63
Z4 Recessed Electromagnetic Locks
General Description
The Z4 Recessed Electromagnetic Locks operate

with holding forces up to 280kg. Covering
a range of applications these magnets are ideal
for situations where the magnet needs to be
recessed such as swing and sliding doors. With
fixing options including wood, aluminium and
steel constructions, the range caters to most
needs. The Electromagnets are available in both Z4 Recessed Electromagnetic Lock - Non Monitored
Monitored and Non Monitored models, using
Hall-Effect monitoring on some models. These
electromagnetic locks are CSIRO approved for
use on fire doors and are characterised by their
high quality, and proven reliability in both fire Standards and Compliance
and security applications. CE Approved
Key Features C-Tick Certified

retrofit usage
data overleaf
• Self-alignment: armature plate pivots
to accommodate door drop
• Monitored versions: Hall-Effect status
monitoring available on some models
Applications
• Various sliding door applications
Z4 Recessed Electromagnetic Locks
19
ARMATURE PLATE M6 HEXAGON SCREW
ARMATURE SCREW
38.5
M4 SCREW
M6 HEXAGON SCREW
RUBBER
7.5
WASHER
WASHER
188
28
233
248
187
ARMATURE
MOUNTING
SEX NUT 34 BRACKET
ELECTROMAGNETIC LOCK FIXING SCREW
Z4 Recessed Series Technical Information

Z4 Magnet Non Monitored Z4 Magnet Monitored
Dimensions (L)182 x (H)42 x (D)23 mm (L)182 x (H)42 x (D)23 mm
Current 450mA @ 12Vdc 225mA @ 24Vdc 450mA @ 12Vdc 225mA @ 24Vdc
Monitoring None Hall Effect / Bond sensing

The Recessed Series Electromagnetic Lock Product Description Part Number
should be constructed in an aluminium case
with heavy duty electromagnet. The range Z4 Recessed Electromagnet – Non Monitored 770300-200
only operates in fail safe mode and relies on a Z4 Recessed Electromagnet – Monitored 770300-210
secondary lock or battery backup system.
65
Electromagnetic Lock Accessories
L and Z Brackets Angle Bracket Armature Plate Glass Door “U” Bracket
General Description Ordering Information

The Trimec Electromagnetic lock range offers a Product Description Part Number
number of accessory options. These accessories
allow the electromagnetic locks to be used L and Z Brackets
in a number of different applications and Z4 Single EMZ4B-SLZ
can be adjusted and suited to each situation. Z4 Double EMZ4B-DLZ
This allows the installer to configure the door Z8 Single EMZ8B-SLZ
as required allowing user specific features Z8 Double EMZ8B-DLZ
such as open in / open out selection or glass Glass Door Armature Plate
door applications. Trimec’s Electromagnetic Z4 EMZ4B-GA
Lock accessories meet or exceed local and Z8 EMZ8B-GA
international standards, providing safe and Glass Door “U” Bracket (12mm Glass)
secure locking. Z4 EMZ4B-GU

Z8 EMZ8B-GU
Key Features Mounting Plates
• Adjustable fixing positions Z4 Single EMZ4B-SMP
Z4 Double EMZ4B-DMP
• Cast aluminium construction Z8 Single EMZ8B-SMP
• Meet and exceed International and local Z8 Double EMZ8B-DMP
standards Armature Bracket

Z4 Non-Monitored EMZ4B-AN
Applications Z4 Monitored EMZ4B-AM
• Open in/Open out doors Z8 Non-Monitored EMZ8B-AN

Z8 Monitored EMZ8B-AM
• Glass door security Screw Kits
• Double doors security Z4 EMZ4SP-SC
Z8 EMZ8SP-SC
• Sliding door security PCB’s
Z4 Monitored EMZ4SP-PCBM
Z8 Monitored EMZ8SP-PCBM
67
ASSA ABLOY is the global leader in door opening
solutions, dedicated to satisfying end-user needs
for security, safety and convenience.
ASSA ABLOY is represented in all major regions,
in both mature and emerging markets, with
leading positions in Australia, Europe and
North America.
As the world’s leading lock group, ASSA ABLOY
offers a more complete product range of door
opening solutions than any other company
on the market.
Head Office
ASSA ABLOY Australia Pty Limited
235 Huntingdale Road
Oakleigh Victoria 3166
Australia
+61 (3) 8574 3888

[email protected]
AAA-CAT-081
assaabloyopeningsolutions.com.au
ASSA ABLOY Australia Pty Limited ABN 90 086 451 907 ©2019

Trimec EM Lock

Uploaded by

Copyright:

Available Formats

Trimec EM Lock

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Trimec EM Lock

Uploaded by

Copyright:

Available Formats

Electric Mortice Locks

Electromagnetic Locking Solutions

Z Series Single Non Monitored EML 56

With fixing options including wood, aluminium

(Part 1: Fire resistant door sets)

DOOR ARMATURE MAGNET

Single Series Technical Information

Holding Force 250kg – 280kg 550kg – 580kg

Dimensions* (L)238 x (H)48 x (D)27 mm (L)266 x (H)72 x (D)40 mm

Voltage 12Vdc/ 24Vdc ±10% 12Vdc/ 24Vdc ±10%

Current 450mA @ (12Vdc) 225mA @ (24Vdc) 512mA @ (12Vdc) 256mA @ (24Vdc)

Monitoring None None

Operating Temperature -10 to 55 Degrees -10 to 55 Degrees

Operating Humidity 0 - 95% 0 - 95%

Specification Statement Ordering Information

The Single Series Electromagnetic Locks operate

With fixing options including wood, aluminium Z4 Electromagnetic Lock - Monitored

(Part 1: Fire resistant door sets)

• Instantaneous release: smart electronics CE Approved

Reed switch monitoring

DOOR ARMATURE MAGNET 24.9 40

Z4 ELECTRO MAGNETIC LOCK ASSEMBLY

Single Series Technical Information

Holding Force 250kg – 280kg 550kg – 580kg

Dimensions* (L)238 x (H)48 x (D)27 mm (L)266 x (H)72 x (D)40 mm

Voltage 12Vdc/ 24Vdc ±10% 12Vdc/ 24Vdc ±10%

Current 450mA @ (12Vdc) 225mA @ (24Vdc) 512mA @ (12Vdc) 256mA @ (24Vdc)

Operating Temperature -10 to 55 Degrees -10 to 55 Degrees

Operating Humidity 0 - 95% 0 - 95%

Specification Statement Ordering Information

crucial for correct operation. EMZ8 Bracket Single L & Z EMZ4B-SLZ

Z4 Double Electromagnetic Lock - Non Monitored

Z8 Double Electromagnetic Lock - Non Monitored

General Description Applications

(Part 1: Fire resistant door sets)

Typical Install for Z4 & Z8 out swinging doors.

Double Series Non Monitored

Holding Force 500kg – 560kg 1100kg – 1160kg

Dimensions* (L)476 x (H)48 x (D)27 mm (L)532 x (H)72 x (D)40 mm

Voltage 12Vdc/ 24Vdc ±10% 12Vdc/ 24Vdc ±10%

Current 900mA @ 12Vdc 450mA @ 24Vdc 1024mA @ 12Vdc 512mA @ (12Vdc)

Monitoring None None

Operating Temperature -10 to 55 Degrees -10 to 55 Degrees

Operating Humidity 0 - 95% 0 - 95%

Specification Statement Ordering Information

correct operation. EMZ8 Bracket Double Mounting Plate EMZ8B-DMP

Z4 Double Electromagnetic Lock - Monitored

Z8 Double Electromagnetic Lock - Monitored

General Description Applications

• Instantaneous release: Smart electronics

Double Series Monitored Technical Information

Holding Force 500kg – 560kg 1100kg – 1160kg

Dimensions (L)476 x (H)48 x (D)27 mm (L)532 x (H)72 x (D)40 mm

Voltage 12Vdc/ 24Vdc ±10% 12Vdc/ 24Vdc ±10%

Current 900mA @ 12Vdc 450mA @ 24Vdc 1024mA @ 12Vdc 512mA @ (12Vdc)

Operating Temperature -10 to 55 Degrees -10 to 55 Degrees

Operating Humidity 0 - 95% 0 - 95%

Specification Statement Ordering Information

The Z4 Recessed Electromagnetic Locks operate

Key Features C-Tick Certified