Engine Power

96 kW (124hp)
Operating Weight

8 ton
Bucket Capacity
WHEEL LOADER

1.6-1.8 m3
P
erformance that never quits...
Wheel loaders that deliver premium power...
Backed by more than 45 years of
innovative experience...
Durability and reliability you can count on...

A s the oldest on-going manufacturer of rubber tired wheel loaders

in the world, Kawasaki specializes in the design and manufacture of
articulated wheel loaders.

You get a machine with a 45-year heritage of successful innovations.

The power and productivity that Kawasaki wheel loaders bring to
the job is a result of that experience.

K awasaki loaders are designed with durability to provide years of

reliable service.
Backed by a dealer network of heavy equipment experts and
dedicated support staff in the Kawasaki parts and service
organization, your investment in a Kawasaki loader is an excellent
choice that will pay dividends for years to come.
P OWER AND
PERFORMANCE
PROVIDE UNMATCHED
PRODUCTIVITY
INCREASED POWER +14kW 01 INCREASED BREAKOUT
With higher engine power the machines are FORCE
now more productive. Breakout force has increased by 3.8% for
better digging ability.

2,670

2,750
INCREASED DUMPING
CLEARANCE 01 INCREASED TIPPING
Dumping clearance has increased by 80mm 60ZⅣ-2 60ZV
LOAD
for easier loading. Tipping load has increased by 2.8% for
better stability.

INCREASED BRAKING 02
POWER TPD 03
Improved braking power ensures safer Standard Torque Proportioning Differentials
operation. (TPD) improve traction in slippery
conditions.

WET DISC SERVICE

BRAKE 02 LSD (OPT) 04
Sealed wet disc brakes provide high For applications with extreme traction
capacity braking and protection from requirements, the Limited Slip Differential
contamination. The dual circuit brake option provides additional traction
system separates the front and rear axles capability.
03
for added safety.
LOAD SENSING
Z BAR-LINK AND CENTER HYDRAULICS FOR THE
PIN ARTICULATION 05 STEERING SYSTEM 06
As a pioneer of the Z BAR-linkage, An energy efficient design of the hydraulic
Kawasaki loaders provide outstanding system allows for the steering pump flow to
breakout force from a simple, reliable be merged with the loader circuit when not
linkage. Kawasaki center pin design is in use. This means full utilization of pump
rugged and durable, providing thousands of capacity for efficient operation in all
hours of trouble free operation. conditions.
04

05 06

Orbitrol

Steering
Loading cylinder
circuit

Pump
D URABLE AND DEPENDABLE
LIFT ARMS/BUCKETS 01
With the strongest lift arms and linkage in the industry, Kawasaki loaders perform well
01

in a wide variety of applications.

High breakout forces and excellent bucket rollback mean bigger loads and better load
retention.
Buckets are designed for easy loading and are equipped with bolt-on heel plates for
easy serviceability.
A bucket leveler is standard.

BUFFER RINGS IN HYDRAULIC RIDE CONTROL FEATURE (OPT) 02

CYLINDERS Ride Control offers a smooth ride to improve load retention and
The hydraulic cylinders utilize a buffer ring to improve sealing increase travel speeds & productivity.
capability to reduce leakage. 02
Without Ride control
With Ride control

E03
ASY ACCESS
SIMPLIFIES SERVICING
EASY ACCESS SIMPLIFIES SERVICING 03
Maintenance is enhanced with the "gull-wing" engine side covers that can be fully
opened for better access.
Filters are conveniently located for easy changing and grease fittings are grouped to
reduce maintenance time and ensure proper lubrication.

HALOGEN HEAD LAMPS (OPT)

Front and rear working lights are bright, halogen lamps for improved safety and
visibility.

DT CONNECTORS 04 HIGH QUALITY FINISH PAINT FOR SHEET METAL

Sealed Deutsch DT electrical connectors are PARTS 05
used throughout the system to reduce Kawasaki's sophisticated painting process utilizes ED (Electro-deposition) primer, a
corrosion and provide a positive electrical baked Melamine Alkyd finish coat as well as a fluoric super protection coat for a
connection. durable and attractive finish.
04
05
FLUORIC SUPER
PROTECTION COAT

BAKED MELAMINE
ALKYD FINISH COAT

ELECTRO-DEPOSITION
PRIMER

SHEET METAL
S PECIAL PACKAGE
ROPS/FOPS CAB (OPT)
The operator's cab is fully certified to meet all ROPS (Rollover Protective Structure)
and FOPS (Falling Object Protective Structure) regulations.
ROPS/FOPS cab with an operator's compartment that offers unmatched comfort and provides increased leg room.
Excellent visibility in all directions is enhanced with both inside and outside mirrors.
The front windshield mounted in rubber gaskets makes windshield replacement fast and easy.
Viscous mounting of the cab reduces vibration and noise.
ELECTRICAL SINGLE
TILT AND TELESCOPIC STEERING (OPT) SHIFT TRANSMISSION
The tilt/telescopic steering column adjusts to suit a variety of operator sizes and CONTROL (OPT) 06
offers greater comfort and efficiency.
Single, twist grip transmission shift lever is
conveniently mounted on the steering
column.
HEATER AND AIR CONDITIONER (OPT) 06

The air conditioner/heater keeps the operator comfortable in any environment.

The high capacity vents provide adequate airflow for efficient defrosting and an even
temperature distribution.
By pressurizing the cab, the climate control system keeps dust out of the cab.

DOWNSHIFT SWITCH
(OPT) 07
The downshift switch located on the boom
control lever provides
07
for quick, convenient
downshifting from 2nd
gear to 1st gear for
more efficient loading.

MULTI ADJUSTABLE
FUNCTION OPERATOR'S RADIO (OPT)
SEAT ONE-TOUCH OPEN-TOP
The fully adjustable suspension seat offers RADIATOR GRILLE (OPT) 09
excellent comfort to reduce operator fatigue To facilitate cleaning the radiator, the
and increase productivity. radiator grille is fully-opened at the top,
particularly useful on sites where clogging
08 occurs and immediate cleaning is needed.
FULLY AUTOMATIC
KAWASAKI 09

TRANSMISSION (OPT) 08
The well proven Kawasaki transmissions
are now electronically controlled and feature
a kick down function.
Transmission lever Speed sensor Transmission
position sensor control valve

Transmission Auto-transmission
controller system
 OPERATING SPECIFICATIONS
Engine Brake system
Make & model ISUZU "BB-6BG1T" diesel engine Service brake 4-wheel wet-disc
Type 4-cycle, water-cooled, Controlled by fully hydraulic system
direct injection, with turbocharger Dual circuits
Rated power Gross 101 kW(135 hp)/2,200 rpm Parking brake Mechanicall
Net 96 kW(124 hp)/2,200 rpm type located on front driveline
Maximum torque Net 471 N • m(48 kgf • m)/1,600 rpm
Number of cylinders 6
(bore X stroke) 105 mm X 125 mm Steering system
Total displacement 6.49 lit Type Articulated frame steering,
Cooling type Pusher type fan hydraulic power steering unit,
Pressurized radiator direct operated type
Fuel injection pump Bosch type Steering valve Orbitroll
Governor All-speed mechanical type Steering angle 40°to each side
Air cleaner Dry type(Double element)
Generator AC 24V 1.2 kW(50 ampere)
Starter motor DC 24V 4.5 kW(6 hp) Loading system
Batteries DC 12V 65 Ah X 2
Type Front end loading, Z bar linkage system
Hydraulic cycle time Lifting(at full load) 6.0 sec
Lowering(empty) 3.0 sec
Transmission & Torque converter
Dumping 1.2 sec
Transmission Total cycle time 10.2 sec
Kawasaki, Full power shift
make & type
Torque converter Kawasaki
make & type 3-element, one-stage, one-phase Hydraulic system
Traveling speed Forward Reverse
Oil pump Loading & Gear type, 117 lit/min
1st 8.5 km/h 8.5 km/h
Steering pump 6.9 MPa(70 kg/cm2) @ 2,200 rpm
2nd 16.0 km/h 16.0 km/h
Lift cylinder type Double acting piston
3rd 34.0 km/h 34.0 km/h
number,bore x stroke 2 X 110 mm bore X 641 mm stroke
Note With 18.4 (L2)
Tilt cylinder type Double acting piston
number,bore x stroke 1 X 120 mm bore X 464 mm stroke
Steering type Double acting piston
Axles & Final Drives cylinder number,bore x stroke 2 X 60 mm bore X 405 mm stroke
Type 4-wheel drive Relief set Control valve 20.6 MPa(210 kg/cm2)
Axle make & type Kawasaki pressure Steering valve 17.2 MPa(175 kg/cm2)
Semi-floating type
Differential gear Spiral bevel gear,
torque proportioning,
Service refill
single stage reduction
Fuel tank 175 lit
Final reduction gear Inboard mounted,
Engine lubricant(including oil pan) 13 lit
Internal planetary gear
Engine cooling water 47 lit
Rear axle oscillation angle ±12°
T/M & T/C 20 lit
Tire(standard) 18.4 (L2) Tubeless
Axle front/rear 40 lit
Brake equipment 2 lit
Hydraulic system(including oil tank) 100 lit

Weight change
Option item Operating Tipping load(kg) Overall width(mm)
Overall height(mm) Tread Overall length(mm)
weight(kg) Straight Full turn (outside tire)
ROPS/FOPS cab +470 +360 +320 - +95 - -
Open ROPS/FOPS canopy +200 +160 +130 - +95 - -
Enclosed steel cab +300 +250 +200 - +95 - -
Removal open canopy -50 -40 -40 - -130 - -
17.5-25-12PR (L2) +160 +120 +100 -50 ±0 -40 ±0
Tires
18.4-24-10PR (L2) ±0 ±0 ±0 ±0 ±0 ±0 ±0
Air conditioner +70 +60 +50 - - - -
Additional counter weight +310 +690 +590 - - - +50
Bucket
Standard boom High lift boom Super high lift boom
General purpose Light material Light material Loose material Light material
Bolt-on edges Teeth Bolt-on edges Bolt-on edges Bolt-on edges Bolt-on edges
GSC GST LSC GSC HSC HSC

Bucket capacity heaped m3 1.6 1.5 1.8 1.6 1.4 1.4

struck m3 1.4 1.3 1.6 1.4 1.2 1.2
Max. dumping clearance mm 2,750 2,680 2,700 3,050 3,150 3,705
Max. dumping reach mm 990 1,060 1,040 1,005 950 960
Max. hinge pin height mm 3,570 3,870 4,470
Digging depth (with bucket level) mm 75 90 75 75 75 75
Breakout force kN 81.3 88.2 73.0 81.3 90.2 90.2
Bucket tilt-back angle at carry position deg 50° 49° 48°
Overall length mm 6,555 6,665 6,625 6,850 6,770 7,370
Overall height up to cab top mm 3,020
bucket full raise mm 4,715 4,715 4,765 5,015 4,935 5,535
Overall width outside tire mm 2,360
outside bucket mm 2,450 2,450 2,450 2,450 2,450 2,450
Tread mm 1,860
Wheel base mm 2,700
Min. turning radius at outside bucket mm 5,405 5,435 5,425 5,530 5,505 5,760
at center of
mm 4,640
outside tire
Min. ground mm 405
Full articulation angle deg 40°
Operating weight with canopy kg 7,980 7,950 8,010 8,040 8,020 8,330
Static tipping load straight kg 6,570 6,600 6,540 5,570 5,590 4,170
full turn kg 5,630 5,660 5,600 4,630 4,650 3,230
The weight and load figure includes 18.4 (L2) tubeless tire, canopy, lubricant, coolant, full fuel tank and operator.

Bucket selection charts

Standard boom High lift boom Super high lift boom
material density [kg/m3] material density [kg/m3] material density [kg/m3]
800 1000 1200 1400 1600 1800 2000 800 1000 1200 1400 1600 800 1000 1200 1400
bucket capacity

1.8 1.4 1.4

1.6 1.6 [m3]

1.5 [m3] bucket fill

115% 100% 95%
[m3]
40°
40°

2450

1860
2360
2450

1860
2360

40°
40°

0
0

64
64

R4
R4

R5 R5
405 405
45°
45°

4715
4715

990 990
3570
3570

3115
3020
2750

2750

°
°

50
50

405 405

2700 2700
6555 6555
STANDARD EQUIPMENT (Standard specifications may vary. Contact your Kawasaki dealer for specifics.)
Electrical High beam indicator lamp Power train
50 ampere generator Hour meter Air cleaner (double elements dry type)
Batteries; 12V-65AH 2 units Parking brake indicator lamp ISUZU BB-6BG1T diesel engine
Electric starter Preheat indicator lamp Full hydraulic enclosed wet multi-disc brakes
Lights Speedometer Kawasaki axles, torque proportioning
Headlight 2 units Torque convertor oil temperature warning differentials (front/rear)
Working light 2 units (rear) lamp Kawasaki torque converter
Stop/Tail light 2 units Transmission declutch lamp Tires,18.4 (L2) tubeless
Backup light 2 units Turn signal indicator lamp 3mm pitch plate fin radiator
Turn signal light 2 units Working light indicator lamp
Others
Gauges and indicators Operator environment Drawbar hitch with pin
Air cleaner warning lamp Adjustable operator seat with suspension Handrails
Battery charge lamp Boom/bucket control single lever Ladders, left and right
Brake oil warning lamp Electric single horn Loading linkage, sealed Z-bar type
Engine coolant temperature gauge and Floor mat
warning lamp Open canopy
Engine oil pressure warning lamp Rearview mirrors (exterior)
Fuel level gauge Transmisson declutch selector switch

OPTIONAL ITEMS
Additional counter weight Hydraulic three spool valve system Rearview mirrors (interior)
Anti-corrosion specifications Limited slip differential Seat belt
Ashtray Fork handling package Storage compartment
Bucket leveler Mudflaps Sun visor
Kawasaki auto shift transmission Oil cooler (Hydraulic line) Tinted safety glass
Auto shift indicator lamp Open ROPS/FOPS canopy Laminated glass (front)
Down shift button Pre cleaner Working light 2 units (front)
Neutral indicator lamp Quick coupler Several bucket and tire options are available
Transmission control warning lamp Ride control (speed sensitive automatic) Double lever hydraulic control
Kickout device ROPS/FOPS cab / Enclose steel cab Telescopic and tilt steering wheel
Back up alarm Air conditioner Transmission belly quard
Emergency steering Cigarette lighter Vandalism protection kit
Front and rear wide fenders Cup holder 4mm pitch plate fin radiator
Halogen headlights with high and low beams Front and rear wiper and washers
(2 front) Heater
High lift boom arm / Super high lift boom arm Halogen working light 2 units (front)
Hydraulic circuit for quick coupler pins Radio (AM/FM stereo)

CONSTRUCTION MACHINERY DIVISION

http://www.khi.co.jp/kenki/english/
TOKYO HEAD OFFICE:WORLD TRADE CENTER BLDG.,4-1 HAMAMATSU-CHO 2-CHOME,MINATO-KU TOKYO, 105-6116,JAPAN
PHONE:81-3-3435-2901 FAX:81-3-3435-3480

This specification sheet may contain attachments and optional equipment which are not available in your area.
Please contact your local Kawasaki dealer for those items which you require.
Materials and specifications are subject to change without notice and without obligation on the part of the manufacturer.
The specifications supplied, while believed to be completely reliable, are not to be taken as warranty for which we assume legal responsibility.

,
CL0605XE02 Nov. 08 ○
M Printed in Japan