Scribd Logo
Upload

Welcome to Scribd!

  • 34 views

    Gas Leakage Detector With Sms Alert

    Uploaded by

    raghu charkha
    This document presents a project on a gas leakage detector with SMS alert. It includes an introduction describing the need for the project to detect LPG leaks and notify authorities via SMS. The system includes a gas sensor, Arduino microcontroller, GSM module, buzzer, and LCD display. It works by detecting gas levels, triggering alarms, and sending SMS alerts when a leak is detected. The project aims to prevent fires and explosions from gas leaks and ensure safety.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Gas Leakage Detector With Sms Alert

    Uploaded by

    raghu charkha
    34 views11 pages
    This document presents a project on a gas leakage detector with SMS alert. It includes an introduction describing the need for the project to detect LPG leaks and notify authorities via SMS. The system includes a gas sensor, Arduino microcontroller, GSM module, buzzer, and LCD display. It works by detecting gas levels, triggering alarms, and sending SMS alerts when a leak is detected. The project aims to prevent fires and explosions from gas leaks and ensure safety.

    Original Description:

    REPORT

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document presents a project on a gas leakage detector with SMS alert. It includes an introduction describing the need for the project to detect LPG leaks and notify authorities via SMS. The system includes a gas sensor, Arduino microcontroller, GSM module, buzzer, and LCD display. It works by detecting gas levels, triggering alarms, and sending SMS alerts when a leak is detected. The project aims to prevent fires and explosions from gas leaks and ensure safety.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    34 views11 pages

    Gas Leakage Detector With Sms Alert

    Uploaded by

    raghu charkha
    This document presents a project on a gas leakage detector with SMS alert. It includes an introduction describing the need for the project to detect LPG leaks and notify authorities via SMS. The system includes a gas sensor, Arduino microcontroller, GSM module, buzzer, and LCD display. It works by detecting gas levels, triggering alarms, and sending SMS alerts when a leak is detected. The project aims to prevent fires and explosions from gas leaks and ensure safety.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 11

    Department of Electronics & Telecommunication Engineering

    Dr.BabasahebAmbedkar Technological University, Lonere.


    Lonere-402103

    GAS LEAKAGE DETECTOR WITH SMS


    ALERT
    PRESENTED BY:
    MAHESH S. UDGIRE
    ARSHAD M. SHAIKH
    OUTLINES
    • BACKGROUND STUDY
    • INTRODUCTUION
    • BLOCK DIAGRAM
    • COMPONENT
    • ADVANTAGES & APPLICATION
    • FUTURE WORK
    • CONCLUSION
    BACKGROUND STUDY :
    • LPG leakages are a mutual hindrance in household and manufacturing nowadays.
    It is very life threatening if you will not distinguish and modified right away. The
    idea behind our project is to give a solution by power cut the gas provision as
    soon as a gas leakage is perceived apart from activating the sounding alarm.
    • In addition to this, the authorized person will receive a message informing him
    about the leakage With the increase of natural gas productions in the last 10
    years: Philippines gas industry has really taken its toll. However, the Bureau of
    Fire Protection prompted the society to yield preventive and security measures
    against defective electrical cabling and dissolved petroleum gas leaks regardless
    of fire alarming incidents in the first half of 2017
    INRODUCTION
    • The project entitled “LPG Leakage Detector using Arduino with SMS Alert and
    Sound Alarm”, will be a great help in terms of preventing any danger caused by gas
    leakage. The purpose of this project is to detect the presence of LPG leakage as a
    part of a safety system.
    • Apart from sound alarm, an SMS alert will inform the authorized person and the
    solenoid valve will be triggered to shut down the gas supply to prevent any
    harmful effects due to gas leakage.
    • Descriptively, we use a gas sensor to monitor the LPG if the gas leak reaches
    beyond the normal level. This proposed project will trigger the sound alarm. In
    addition, the authorized person will be informed about the leakage via SMS alert
    and the gas supply will be automatically shut down. The people can be saved from
    a potential explosion caused by gas leakage
    CIRCUI DIAGRAM :
    WORKING :
    • The Complete Connection Diagram consists of the Microcontroller Circuit, GSM
    Module, Power Supply, GAS Sensor Module and Buzzer. The Power Supply is
    fed to the GSM Module. The output of the sensor goes low as soon as the MQ-5
    Gas Sensor senses any gas leakage from the storage. This is detected by the
    microcontroller and the LED & buzzer are turned ON. The microcontroller
    continues sending message as “GAS LEAKAGE” to a pre-defined mobile number
    using GSM Module.
    • Arduino will be active with 5 volts‟ power supply. The sensor will detect gas
    leakage once the system is launched, if there is no gas leakage, it will display
    "Normal Condition Air Cleaning" on the display. If the gas is leaked otherwise,
    the following three steps will follow Step 1: A signal from the microcontroller
    will go to the display and show gas leakage message there. Step 2: The signal
    from Buzzer will signal when the first step is completed. Step 3: Lastly, through
    GSM, there will be a signal message that the gas has been leaked to a specific
    number or multiple.
    COMPONENTS

    ARDIUNO MQ5 SENSOR

    • Arduino Uno is a microcontroller board • natural gasses are everywhere. They are easy
    to transport and provide energy for various
    based on the ATmega328P . It has 14
    tasks in both household and industrial use. It
    digital input/output pins (of which 6
    also possesses a significant risk of fire if not
    can be used as PWM outputs), 6
    handled carefully. This is where MQ-5
    analog inputs, a 16 MHz quartz crystal,
    Combustible Gas Sensor comes into play. The
    a USB connection, a power jack, an
    MQ-5 Combustible Gas Sensor can detect LPG,
    ICSP header and a reset button.
    H2, LPG, CH4, and CO.
    COMPONENTS

    SIM808L GSM MODULE I2C LCD DISPLAY

    • This is a GSM & GPS Modem based on


    Simcom's SIM808 Module. This GSM-GPS • The character LCD is ideal for
    Modem is perfect for projects which require displaying text and numbers and
    both GSM Modem & GPS Module. SIM808 special characters. LCDs incorporate a
    module is a GSM and GPS two-in-one function small add-on circuit (backpack)
    module. It is based on the latest GSM/GPS mounted on the back of the LCD
    module SIM808 from SIMCOM, supports module.
    GSM/GPRS Quad-Band network and combines
    GPS technology for satellite navigation.
    ADVANTAGES APPLICATIONS

    • Get real-time alerts about the gaseous


    presence in the atmosphere • Harmful Gas Detection
    • Prevent fire hazards and explosions
    • Fire Hazard Prevention
    • Supervise gas concentration levels
    • Ensure worker’s health • Oxygen Level Measurement

    • Real-time updates about leakages


    • Cost-effective installation
    • Data analytics for improved decisions
    RESULT

    • Working Principles Arduino will be active with 5 volts


    power supply. The sensor will detect gas leakage once the
    system is launched, if there is no gas leakage, it will display
    "Normal Condition Air Cleaning" on the display.

    • Step 1: A signal from the microcontroller will go to the


    display and show gas leakage message there.

    • Step 2: The signal from Buzzer will signal when the first
    step is completed.

    • Step 3: Lastly, through GSM, there will be a signal


    message that the gas has been leaked to a specific number or
    multiple.
    CONCLUSION REFRANCE
    • After all the data had been gathered,
    analyzed and processed, the proponents • https://www.researchgate.net/publicatio
    arrived at the succeeding conclusion. n/319622819_GSM_based_Gas_Leakage_
    Therefore, the researchers concluded Detection_System
    that the “LPG Leakage Detector Using
    Arduino with SMS Alert and Sound • https://www.researchgate.net/publicatio
    Alarm” will help a lot in terms of n/257555821_LP_GA S_LEAKAGE_ALARM
    preventing any danger caused by gas
    leakage and useful as part of safety to
    avoid the gas leak that can cause
    harmful result. It will also improve the
    safety of all users of Liquefied Petroleum
    Gas

    You might also like