M.D.

DAYANAND MODEL SCHOOL, NAKODAR

ACADEMIC YEAR : 2022-23

PROJECT REPORT ON

COMPUTING PI VALUE

ROLL NO :

NAME : ARSHIA

CLASS : XII – SCIENCE(NON-MED.)

SUBJECT : INFORMATICS PRACTICES

SUB CODE : 065

PROJECT GUIDE: Mrs. RESHMA PAMA

PGT (CS)

M.D. DAYANAND MODEL SCHOOL

NAKODAR

PUNJAB

1
 M.D. DAYANAND MODEL SCHOOL,NAKODAR

CERTIFICATE

This is to certify that Cadet ARSHIA SHARMA Roll No: has successfully

completed the project Work entitled BOOK STALL MANAGEMENT in the subject

INFORMATICS PRACTICES(065) laid down in the regulations of CBSE for the

purpose of Practical Examination in Class XII to be held in M.D. DAYANAND

MODEL SCHOOL, NAKODAR on ____________.

(RESHMA PAMA)
PGT IP
Master IC

Examiner:

Name: _______________

Signature:

2
 ACKNOWLEDGEMENT

Apart from the efforts of me, the success of any project depends largely on
the encouragement and guidelines of many others. I take this opportunity to express
my gratitude to the people who have been instrumental in the successful completion
of this project.

I express deep sense of gratitude to almighty God for giving me strength for
the successful completion of the project.

I express my heartfelt gratitude to my parents for constant encouragement

while carrying out this project.

I gratefully acknowledge the contribution of the individuals who contributed in

bringing this project up to this level, who continues to look after me despite my flaws,

I express my deep sense of gratitude to the luminary The Principal, M.D.

DAYANAND MODEL SCHOOL, NAKODAR who has been continuously motivating
and extending their helping hand to us.

My sincere thanks to Mrs. RESHMA PAMA, Master In-charge, A guide,

Mentor all the above a friend, who critically reviewed my project and helped in
solving each and every problem, occurred during implementation of the project

The guidance and support received from all the members who contributed
and who are contributing to this project, was vital for the success of the project. I am
grateful for their constant support and help.

PROJECT ON COMPUTING PI VALUE

3
INTRODUCTION

This project is all about a software for Book Stalls. It helps the Book Stall

Owner to have a full-fledged control over his/her stall. It adds a new stock, updates

an existing stock and ofcourse prints a receipt to the customer. Besides it displays a

graph of the sales of the current month.

OBJECTIVES OF THE PROJECT

The objective of this project is to let the students apply the programming

knowledge into a real- world situation/problem and exposed the students how

programming skills helps in developing a good software.

1. Write programs utilizing modern software tools.

2. Apply object oriented programming principles effectively when developing

small to medium sized projects.

3. Write effective procedural code to solve small to medium sized problems.

4. Students will demonstrate a breadth of knowledge in computer science, as

exemplified in the areas of systems, theory and software development.

5. Students will demonstrate ability to conduct a research or applied Computer

Science project, requiring writing and presentation skills which exemplify

scholarly style in computer science.

4
PROPOSED SYSTEM

Today one cannot afford to rely on the fallible human beings of be really

wants to stand against today’s merciless competition where not to wise saying “to

err is human” no longer valid, it’s outdated to rationalize your mistake. So, to keep

pace with time, to bring about the best result without malfunctioning and greater

efficiency so to replace the unending heaps of flies with a much sophisticated hard

disk of the computer.

One has to use the data management software. Software has been an ascent

in atomization various organisations. Many software products working are now in

markets, which have helped in making the organizations work easier and efficiently.

Data management initially had to maintain a lot of ledgers and a lot of paper work

has to be done but now software product on this organization has made their work

faster and easier. Now only this software has to be loaded on the computer and work

can be done.

This prevents a lot of time and money. The work becomes fully automated

and any information regarding the organization can be obtained by clicking the

button. Moreover, now it’s an age of computers of and automating such an

organization gives the better look.

The purposes of this phase are to:

Further define and refine the functional and data requirements and document
them in the Requirements Document,
Complete business process reengineering of the functions to be supported
(i.e., verify what information drives the business process, what information is

5
 generated, who generates it, where does the information go, and who
processes it),
Develop detailed data and process models (system inputs, outputs, and the
process.
Develop the test and evaluation requirements that will be used to determine
acceptable system performance.
Operate, maintain, and enhance the system.
Certify that the system can process sensitive information.
Conduct periodic assessments of the system to ensure the functional
requirements continue to be satisfied.
Determine when the system needs to be modernized, replaced, or retired.

SOURCE CODE

================================================================

# PYTHON MODULE : BOOK.py

import pymysql as cntr , datetime as __dt , matplotlib.pyplot as plt

from random import shuffle
from tempfile import mktemp
from os import system , startfile

__db = cntr.connect(host = 'localhost' , user = 'root' , passwd =

'manager' , database = 'book_shop')
__cur = __db.cursor()
__db.autocommit(True)

#Function to check is it leap year

is_leapyear = lambda year : year % 4 == 0

#Function to get last date of month

def last_month(month , year):
if month in (1,3,5,7,8,10,12) : return 31
elif month == 2 and is_leapyear(year) : return 29
elif month == 2 : return 28
else : return 30

6
clrscreen = lambda : system("cls")

def view_stock() :
__cur.execute("select Book_No , Book_Name , Available_Stock from
stock")
data = __cur.fetchall()
print("Book Number\tBook Name\tStock")
for row in data : print(row[0] , '\t\t' , row[1] , '\t' ,
row[2])

def add_stock() :
print('Add Stock'.center(89 , '='))
bno = unique_book_no()
if bno :
print("Book Number : " , bno)
else : bno = int(input("Enter book number : "))
bname = input("Enter the Book\'s Name : ")
auth = input("Enter the Author of the Book : ")
publ = input("Enter the Publisher of the Book : ")
cost = eval(input("Enter the Cost per Book : "))
stock = int(input("Enter the Quantity purchased : "))
__cur.execute("insert into stock values ({} , '{}' , '{}' , '{}'
, {} , {} , {} , '{}')".format(bno , bname , auth , publ , cost ,
stock , 0, __dt.date.today()))
print("Inserted Sucessfully !!!")

def add_user() :
user = input("Enter the user name : ")
passwd = input("Enter a Password : ")
passwd2 = input("Enter Password to confirm : ")
if passwd == passwd2 :
__cur.execute("insert into users values('{}' ,
'{}')".format(user , passwd))
print("Created Successfully!!!")
elif passwd != passwd2 : print("You've entered different
passwords")

def sell_book() :
print('Purchase')
cname = input("Enter the Customer Name : ")
phno = int(input("Enter the phone number : "))
bno = int(input("Enter book number : "))
bname = input("Enter the name of the book : ")
cost = eval(input("Enter the cost of the book : "))

7
 __cur.execute("insert into purchased values({} ,
'{}')".format(bno , __dt.date.today()))
__cur.execute("update stock set qty_purchased = qty_purchased +
1 where Book_No = {}".format(bno))
__cur.execute("update stock set Available_Stock =
Available_Stock - 1 where Book_No = {}".format(bno))
print("Bought Successfully")
q = '''Book Shop\nName : {}\nPhone No : {}\nBook Number : {}\
nBook Name : {}\nCost : {}\nDate Of Purchase : {}'''.format(cname ,
phno , bno , bname , cost , __dt.date.today())
filename = mktemp('.txt')
open(filename , 'w').write(q)
startfile(filename , 'print')
__cur.execute('select Book_Name , Book_No , Author from stock
where Available_Stock = 0')
if __cur.rowcount == 1 :
print("STOCK OF ")
print("Book Name : " , __cur.fetchall()[0][0])
print("Book Number : " , __cur.fetchall()[0][1])
print("Author : " , __cur.fetchall()[0][2])
print("EXHAUSTED")
__cur.execute('delete from stock where Available_Stock = 0')

def unique_book_no () :
__cur.execute("select max(Book_No) from stock")
data = __cur.fetchall()
if bool(data[0][0]) :
L1 = [x for x in range((data[0][0] + 1) , (data[0][0] +
10000))]
shuffle(L1)
return L1.pop(0)
else : return False

def view_sales () :
print('Overall Sales This Month')
__cur.execute("select distinct(s.Book_Name) , s.qty_purchased
from stock s , purchased p where s.Book_No = p.Book_No and
p.purchased_on between '{year}-{month}-01' and '{year}-{month}-
{date}'".format(year = __dt.date.today().year , month =
__dt.date.today().month , date =
last_month(__dt.date.today().month , __dt.date.today().year)))
data = __cur.fetchall()
L1 , L2 = [] , []
for row in data :
L1.append(row[0])
L2.append(row[1])
plt.bar(L1 , L2)
plt.xlabel('Books')
plt.ylabel('Sales')
8
 plt.title('Sales')
plt.show()

def login():
user = input("Enter the username : ")
pwd = input("Enter the password : ")
__cur.execute("Select * from users where (username = '{}' and
password = '{}')".format(user , pwd))
if __cur.rowcount : return True

def update_stock() :
bno = int(input("Enter the book number : "))
__cur.execute("select Book_Name , Available_Stock from stock
where Book_No = {}".format(bno))
data = __cur.fetchall()
print("Book Name : " , data[0][0])
print("Available Stock : " , data[0][1])
stock = int(input("Enter the new stock purchased : "))
__cur.execute("update stock set Available_Stock =
Available_Stock + {}".format(stock))
print("Updated Successfully")

====================================================================

# PYTHON MODULE : Tables_in_mysql

import pymysql as cntr

db = cntr.connect(host = 'localhost' , user = 'root' , passwd =

'manager')
db.autocommit(True)
cur = db.cursor()
cur.execute("create database if not exists book_shop")
cur.execute("use book_shop")
cur.execute("create table stock\
(Book_No bigint primary key,\
Book_Name varchar(255),\
Author varchar(255),\
Publisher varchar(255),\
Cost_per_Book float,\
Available_Stock bigint,\
qty_purchased bigint,\
purchased_on date)")
cur.execute("create table users(username varchar(255) , password
varchar(255) , check (username <> 'ADMIN'))")
cur.execute("create table purchased (Book_no bigint , purchased_on
date , foreign key(Book_no) references stock(Book_No))")
cur.execute("create unique index Book_Index on stock(Book_No)")
cur.execute("insert into users values('admin' , 'admin@123')")
9
print("Database and Tables created successfully")
c = input("Press any key to continue---->")
cur.close()
db.close()

====================================================================

# PYTHON MODULE : main

import Book

c = 'y'
while c.lower() == 'y' :
print("Book Shop Management".center(89 , '='))
print('1. Register')
print('2. Login')
print('3. Exit')
choice4 = int(input("Enter the serial number of your choice :
"))
if choice4 == 1 :
Book.clrscreen()
Book.add_user()
elif choice4 == 2 :
Book.clrscreen()
if Book.login() :
Book.clrscreen
C = 'y'
while C.lower() == 'y' :
Book.clrscreen()
print("Book Shop Management".center(89 , '='))
print("1. Book Stock")
print("2. Book Selling")
print("3. Exit")
choice = int(input("Enter the serial number of your
choice : "))
if choice == 1 :
Book.clrscreen()
print("Book Book".center(89 , '='))
print("1. Add a new Stock")
print("2. View all Stock")
print("3. Update an existing Stock")
print("4. Exit")
choice2 = int(input("Enter the choice : "))
if choice2 == 1 :
Book.clrscreen()
Book.add_stock()
elif choice2 == 2 :
Book.clrscreen()
Book.view_stock()

10
 elif choice2 == 3 :
Book.clrscreen()
Book.update_stock()
elif choice2 == 4 :
print("Good Bye")
break
else : print("INVALID CHOICE")
elif choice == 2 :
Book.clrscreen()
print('Book Selling'.center(89 , '='))
print('1. Sell a book')
print('2. View Sales this month')
print("3. Exit")
choice3 = int(input("Enter your choice : "))
if choice3 == 1 :
Book.clrscreen()
Book.sell_book()
elif choice3 == 2 :
Book.clrscreen()
Book.view_sales()
elif choice3 == 3 :
print("Good Bye")
break
else : print("INVALID CHOICE")
elif choice == 3 :
print("Good Bye")
break
else : print("INVALID CHOICE")
C = input("Do you want to continue (y/[n]) : ")
else : print("Good Bye")
else :
print("Either your username or password is incorrect")
elif choice4 == 3 :
print("Good Bye")
break
else : print("INVALID CHOICE")
c = input("Do you want to return to main menu (y/[n]) : ")
else : print("Good Bye")

====================================================================

OUTPUT

11
 HARDWARE AND SOFTWARE REQUIREMENTS

I.OPERATING SYSTEM : WINDOWS 7 AND ABOVE

II. PROCESSOR : PENTIUM(ANY) OR AMD

ATHALON(3800+- 4200+ DUAL CORE)

III. MOTHERBOARD : 1.845 OR 915,995 FOR PENTIUM 0R MSI

K9MM-V VIA K8M800+8237R PLUS

CHIPSET FOR AMD ATHALON

IV. RAM : 512MB+

V. Hard disk : SATA 40 GB OR ABOVE

VI. CD/DVD r/w multi drive combo: (If back up required)

VII. FLOPPY DRIVE 1.44 MB : (If Backup required)

VIII. MONITOR 14.1 or 15 -17 inch

IX. Key board and mouse :

X. Printer : required

SOFTWARE REQUIREMENTS:
12
I. Windows OS
II. Python

Bibliography:
• Informatics Practices With Python - Class XII By : Sumita Arora
• A Project Report On, Book and Database Stall Management(BDSM)
By : Praveen M Jigajinni
• Website: https://www.w3resource.com
• https://en.wikipedia.org/

13
 BIBLIOGRAPHY

1. Computer science With Python - Class XI By : Sumita Arora

2. A Project Report On Space Invader Game and Gold Loan Shop
Management (GLSM)
By : M.Kalanithi
3. Website: https://www.youtube.com

***

14