MAS FOR INF-3507

Division : Irrigation
Subjects : Valve Box Option-01
Material Description : Valve Box Option-01
Product Model : WS-VB910-G, WS-VB1419-G, WS-VB1320-G
Manufacturer : Al-Wasail
Supplier : Al-Wasail Industrial Company
Location of use : Irrigation System
Compliance statement : Yes
Company profile : Yes
MSDS : No
Test certificate : Yes
Approval from previous wave: Yes
Project : No
Samples : Yes

Sign
Name: Amani Al-Falahi
POSITION: - QA/QC Engineer

Design & Reviewed by Reviewed by

Reviewed by Material Reviewed by QS QA/QC Project
Coordinator Manager Manager

Signature

Date
 INDEX

A. Specification Reference

B. Compliance Statement

C. Technical Data Sheet

D. Product Catalogue

E. Test Report

F. Previous MAS

G. Company Profile

H. ISO Certificate

I. Commercial Registration Certificate

J. Country of Origin Certificate

K. Warranty certificate

L. Drawing Reference
SPECIFICATION
 A. Inline emitter:
1. Type: Inline
2. Standard ISO 9261:2004
3. Material: Plastic
4. Pressure compensating Yes
5. Flow Type Turbulent
6. Self-flushing Yes
7. Clogging resistant Yes
8. Constant flow range 0-60⁰
9. Coefficient of variation <5%
10. Operating pressure: 0.5 – 4.5 bar
11. Required filtration: 120 mesh
12. Flow: 3.5 l/h AND 2.4 l/h
13. Spacing 30.5 & 46 cm
14. Warranty: 7 years

B. Drip tubing:
1. Type: Drip tubing
2. Standard ISO 9261:2004
3. Material: LDPE
4. Minimum carbon black 2.8%
5. OD 16 mm
6. WTH 1.1 mm
7. Warranty: 7 years

C. Fittings:
1. Type Bush
2. Standard: NA
3. Material: High impact plastic & ABS
4. UV-resistant: Yes
5. Warranty: 3 Years

2.15 VALVE BOXES

A. Type: Grade Level

B. Standard NA
C. Loading Capabilities: 15 KN
D. Material:
1. Body & Cover: Nitrogen Foamed HDPE
2. Bolt and nut: Stainless steel
3. Identification tag: Aluminum
E. Duty: Light
F. Bolt Hex-bolt
G. Ultraviolet resistant property: Yes

19-1780 32 8000/12 Automatic Irrigation System

AL-MOUJ, SECTOR D, BOULEVARD
Muscat, Oman
 H. Cover Type T type
I. Green color body and cover: Yes
J. Chemical resistant: Yes
K. Labeled in Arabic and English: Yes
L. Dimension:
Model No Length (cm) x Width (cm) Depth (cm) Application
910-10 25 DIA 25 Pull Box and Quick Coupling
Valve
1419-12 43 x 30 31 1.0” Solenoid valve
Assembly

M. Warranty: 10 year

PART 3: EXECUTION

1.01 SITE CONDITIONS

A. Inspections:
1. Examine surfaces, substrates and conditions for compliance with
requirements of other sections in which that related work is specified,
and determine if surfaces, substrates not proceed with work of this
Section until unsatisfactory conditions have been corrected in a manner
acceptable to the Installer. Starting installation constitutes acceptance of
surfaces substrates and conditions.
2. Verify that irrigation system may be installed in strict accordance with all
pertinent codes and regulations, the original design, the referenced
standards, and the manufacturer's recommendations.

B. Discrepancies:
1. In the event of discrepancy, immediately notify the Engineer or Owner’s
Authorized Representative.
2. Do not proceed with installation in areas of discrepancy until all
discrepancies have been resolved.

C. Grades:
Before starting work, carefully check all grades to determine that work may
safely proceed, keeping within the specified material depths with respect to
finish grade 2. Final grades shall be accepted by the Engineer and Owner’s
Authorized Representative before work on this section will be allowed to
begin.

D. Field Measurements:

19-1780 32 8000/13 Automatic Irrigation System

AL-MOUJ, SECTOR D, BOULEVARD
Muscat, Oman
 PROJECT NAME SECTOR D, AREA 6,9 LUXURY BOULEVARD Option Date
01 08.12.2022

COMPLAINCE SHEET FOR VALVE BOX

Project: Sector D

Material / Subject: Valve Box

Manufacturer / Supplier: Al Wasail

Location to
Ref: Specification Proposed Remarks
be used

A. Type: Grade level

B. Standard: NA
C. Loading capabilities: 15KN
D. Material: -High impact, high density / polythene
1. Body & Cover: Nitrogen Foamed HDPE structural constructions and shall be colored
Part-13 2. Bolt & nut: Stainless steel green.
-Comply Lock type Landscape
Irrigation 3. Identification tag: Aluminium
-Valve boxes are WS-VB910-G, WS- Area
2.15
E. Duty: Light VB1419, WS-VB1320G
F. Bolt: Hex-bolt
G. Ultraviolet resistant property: Yes
H. Cover type: T type
I. Green color body and cover: Yes
PROJECT NAME SECTOR D, AREA 6,9 LUXURY BOULEVARD Option Date
01 08.12.2022

J. Chemical resistant: Yes

K. Labeled in Arabic and English: Yes
L. Dimension:

Solenoid valve assembly

1. Model:1419-12 WS-VB910 measurement 254mm top 298mm
2. Length x Width (cm): 40x30 bottom diameter and 254 mm high.
3. Depth (cm): 31 -WS-VB1419 measurement 482.6 mm
Quick coupler valve assembly long,537 mm wide and 304 high.
1. Model: 910-10 -WS-VB1320-G measurement 635mm
2. Length x Width(cm): 25 Día long,483 mm wide and 304 mm high.
3. Depth (cm):25

M. Warranty: 10 Year Warranty: 2 Year

FM/IF/QC/35 Industrial Company

TECHNICAL DATA SHEET

TO WHOM IT MAY CONCERN

Product Description: VALVE BOX-6”GREEN (AL-WASAIL)

Material: HDPE
Manufacturing Standard: ISO & Alwasail Methods
Alwasail Industrial Company certify that the above cited product shall be manufactured,
inspected & tested in accordance with ISO & Alwasail Methods.
Following are the requirement and compliances:
Test Description Ref. Standard Unit Standard Req. Result
1. Raw Material
Characteristics Melt Flow Index ISO - 1133 g/10min 8.0 ± 20% Shall Comply
@230°C/2.160kgs
Density ISO - 1183 g/cm3 6 Shall Comply
Master Batch Green Al-Wasail (Method) % 2.0 Shall Comply
U.V Stabilizer Al-Wasail (Method) % 2.0 Shall Comply
2. MECHANICAL/PHYSICAL CHARACTERISTICS
UV (Resistant ) Direct Sunlight Al-Wasail (Method) Hrs 400 Shall Comply

Falling Test Al-Wasail (Method) Meters 5 Shall Comply

Load Resistance Test Al-Wasail (Method) Kg 128 Shall Comply

3.MECHANICAL/PHYSICAL CHARACTERISTICS
Tensile Strength ASTM D638 Bar 385 to 504 Shall Comply

Flexural Modulus Bar Shall Comply

Notched Izod Impact Strength ASTM D256 Ft-lbs/In2 0.5 to 20 Shall Comply

Deflection Temperature ASTM D648 °F 140 to 170 Shall Comply

4.GEOMETRICAL CHARACTERISTIC

A B C
148mm 223mm 224mm
We certify that the product mentioned above shall fully comply with the above mentioned specifications.

__________________
Quality Control Deprt

Revision No: 00 Revised On. 01.05.2016 Page 01 of 01

FM/IF/QC/35 Industrial Company

TECHNICAL DATA SHEET

TO WHOM IT MAY CONCERN

Product Description: VALVE BOX-10” GREEN, (ALWASAIL)

Material: HDPE
Manufacturing Standard: ISO & Alwasail Methods
Alwasail Industrial Company certifies that the above cited product shall be manufactured,
inspected & tested in accordance with ISO, ASTM standards & Alwasail Methods.

Following are the requirements and compliances:

Test Description Ref. Standard Unit Standard Req. Result
1. Raw Material
Characteristics Melt Flow Index ISO - 1133 g/10min 8.0 ± 20% Shall Comply
@230°C/2.160kgs
Density ISO - 1183 g/cm3 6 Shall Comply
Master Batch Green Alwasail (Method) % 2.0 Shall Comply
U.V Stabilizer Alwasail (Method) % 2.0 Shall Comply
2. MECHANICAL/PHYSICAL CHARACTERISTICS
UV (Resistant ) Direct Sunlight Alwasail (Method) Hrs 400 Shall Comply

Falling Test Alwasail (Method) Meters 5 Shall Comply

Load Resistance Test Alwasail (Method) Kg Shall Comply

3.MECHANICAL/PHYSICAL CHARACTERISTICS
Tensile Strength ASTM D638 Bar 385 to 504 Shall Comply

Flexural Modulus Bar Shall Comply

Notched Izod Impact Strength ASTM D256 Ft-lbs/In2 0.5 to 20 Shall Comply

Deflection Temperature ASTM D648 °F 140 to 170 Shall Comply

4.GEOMETRICAL CHARACTERISTICS

We certify that the product mentioned above shall comply with the above mentioned specifications.

__________________
Quality Department

Revision No: 00 Revised On. 01.05.2016 Page 01 of 01

FM/IF/QC/35 Industrial Company

TECHNICAL DATA SHEET

TO WHOM IT MAY CONCERN

Product Description: VALVE BOX-11” GREEN,Model:1111 (ALWASAIL)

Material: HDPE
Manufacturing Standard: ISO & Alwasail Methods
Alwasail Industrial Company certify that the above cited product shall be manufactured,
inspected & tested in accordance with ISO & Alwasail Methods.
Following are the requirement and compliances:
Test Description Ref. Standard Unit Standard Req. Result
1. Raw Material
Characteristics Melt Flow Index ISO - 1133 g/10min 8.0 ± 20% Shall Comply
@230°C/2.160kgs
Density ISO - 1183 g/cm3 6 Shall Comply
Master Batch Green Alwasail (Method) % 2.0 Shall Comply
U.V Stabilizer Alwasail (Method) % 2.0 Shall Comply
2. MECHANICAL/PHYSICAL CHARACTERISTICS
UV (Resistant ) Direct Sunlight Alwasail (Method) Hrs 400 Shall Comply

Falling Test Alwasail (Method) Meters 5 Shall Comply

Load Resistance Test Alwasail (Method) Kg Shall Comply

3.MECHANICAL/PHYSICAL CHARACTERISTICS
Tensile Strength ASTM D638 Bar 385 to 504 Shall Comply

Flexural Modulus Bar Shall Comply

Notched Izod Impact Strength ASTM D256 Ft-lbs/In2 0.5 to 20 Shall Comply

Deflection Temperature ASTM D648 °F 140 to 170 Shall Comply

4.GEOMETRICAL CHARACTERISTIC

We certify that the product mentioned above shall fully comply with the above mentioned specifications.

__________________
Quality Department

Revision No: 00 Revised On. 01.05.2016 Page 01 of 01

FM/IF/QC/35 Industrial Company

TECHNICAL DATA SHEET

TO WHOM IT MAY CONCERN

Product Description: VALVE BOX-12” GREEN (ALWASAIL)

Material: HDPE
Manufacturing Standard: ISO & Alwasail Methods
Alwasail Industrial Company certifies that the above cited product shall be produced, inspected
& tested in accordance with ISO, ASTM standards & Alwasail Methods.
Following are the requirement and compliances:
Test Description Ref. Standard Unit Standard Req. Result
1. Raw Material
Characteristics Melt Flow Index ISO - 1133 g/10min 8.0 ± 20% Shall Comply
@230°C/2.160kgs
Density ISO - 1183 g/cm3 6 Shall Comply
Master Batch Green Alwasail (Method) % 2 Shall Comply
U.V Stabilizer Alwasail (Method) % 2 Shall Comply
2. MECHANICAL/PHYSICAL CHARACTERISTICS
UV (Resistant ) Direct Sunlight Alwasail (Method) Hrs 400 Shall Comply
Falling Test Alwasail (Method) Meters 5 Shall Comply
Load Resistance Test Alwasail (Method) Kg 400 Shall Comply
3.MECHANICAL/PHYSICAL CHARACTERISTICS
Tensile Strength ASTM D638 Bar 385 to 504 Shall Comply
Flexural Modulus Bar Shall Comply
Notched Izod Impact Strength ASTM D256 Ft-lbs/In2 0.5 to 20 Shall Comply
Deflection Temperature ASTM D648 °F 140 to 170 Shall Comply
4.GEOMETRICAL CHARACTERISTICS

We certify that the product mentioned above shall comply with the above mentioned specifications.

__________________
Quality Department

Revision No: 00 Revised On. 01.05.2016 Page 01 of 01

FM/IF/QC/35 Industrial Company

TECHNICAL DATA SHEET

TO WHOM IT MAY CONCERN

Product Description: VALVE BOX-15” GREEN, Model: 1324 (ALWASAIL) Big Jumbo
Material: HDPE
Manufacturing Standard: ISO & Alwasail Methods
Alwasail Industrial Company certifies that the above cited product shall be produced, inspected
& tested in accordance with ISO, ASTM standards & Alwasail Methods.
Following are the requirement and compliances:
Test Description Ref. Standard Unit Standard Req. Result
1. Raw Material
Characteristics Melt Flow Index ISO - 1133 g/10min 8.0 ± 20% Shall Comply
@230°C/2.160kgs
Density ISO - 1183 g/cm3 6 Shall Comply
Master Batch Green Alwasail (Method) % 2 Shall Comply
U.V Stabilizer Alwasail (Method) % 2 Shall Comply
2. MECHANICAL/PHYSICAL CHARACTERISTICS
UV (Resistant ) Direct Sunlight Alwasail (Method) Hrs 400 Shall Comply
Falling Test Alwasail (Method) Meters 5 Shall Comply
Load Resistance Test Alwasail (Method) Kg 700 Shall Comply
3.MECHANICAL/PHYSICAL CHARACTERISTICS
Tensile Strength ASTM D638 Bar 385 to 504 Shall Comply
Flexural Modulus Bar Shall Comply
2
Notched Izod Impact Strength ASTM D256 Ft-lbs/In 0.5 to 20 Shall Comply
Deflection Temperature ASTM D648 °F 140 to 170 Shall Comply
4.GEOMETRICAL CHARACTERISTICS

We certify that the product mentioned above shall comply with the above mentioned specifications

Quality Department

Revision No: 00 Revised On. 01.05.2016 Page 01 of 01

FM/IF/QC/35 Industrial Company

TECHNICAL DATA SHEET

TO WHOM IT MAY CONCERN

Product Description: VALVE BOX-18” GREEN, Model: 1730 (ALWASAIL) Super Jumbo
Material: HDPE
Manufacturing Standard: ISO & Alwasail Methods
Alwasail Industrial Company certifies that the above cited product shall be produced, inspected
& tested in accordance with ISO, ASTM standards & Alwasail Methods.
Following are the requirement and compliances:
Test Description Ref. Standard Unit Standard Req. Result
1. Raw Material
Characteristics Melt Flow Index ISO - 1133 g/10min 8.0 ± 20% Shall Comply
@230°C/2.160kgs
Density ISO - 1183 g/cm3 6 Shall Comply
Master Batch Green Alwasail (Method) % 2 Shall Comply
U.V Stabilizer Alwasail (Method) % 2 Shall Comply
2. MECHANICAL/PHYSICAL CHARACTERISTICS
UV (Resistant ) Direct Sunlight Alwasail (Method) Hrs 400 Shall Comply
Falling Test Alwasail (Method) Meters 5 Shall Comply
Load Resistance Test Alwasail (Method) Kg 727 Shall Comply
3.MECHANICAL/PHYSICAL CHARACTERISTICS
Tensile Strength ASTM D638 Bar 385 to 504 Shall Comply
Flexural Modulus Bar Shall Comply
Notched Izod Impact Strength ASTM D256 Ft-lbs/In2 0.5 to 20 Shall Comply
Deflection Temperature ASTM D648 °F 140 to 170 Shall Comply
4.GEOMETRICAL CHARACTERISTICS

We certify that the product mentioned above shall comply with the above mentioned specifications.

__________________
Quality Department

Revision No: 00 Revised On. 01.05.2016 Page 01 of 01

FM/IF/QC/35 Industrial Company

TECHNICAL DATA SHEET

TO WHOM IT MAY CONCERN

Product Description: VALVE BOX-20”GREEN (AL-WASAIL)

Material: HDPE
Manufacturing Standard: ISO & Alwasail Methods
Al-Wasail Industrial Company certifies that the above cited product will be produced, inspected
& tested in accordance with ISO & Al-Wasail Methods.
Following are the requirement and compliances:
Test Description Ref. Standard Unit Standard Req. Result
1. Raw Material
Characteristics Melt Flow Index ISO - 1133 g/10min 8.0 ± 20% Shall Comply
@230°C/2.160kgs
Density ISO - 1183 g/cm3 6 Shall Comply
Master Batch Green Al-Wasail (Method) % 2 Shall Comply
U.V Stabilizer Al-Wasail (Method) % 2 Shall Comply
2. MECHANICAL/PHYSICAL CHARACTERISTICS
UV (Resistant ) Direct Sunlight Al-Wasail (Method) Hrs 400 Shall Comply
Falling Test Al-Wasail (Method) Meters 5 Shall Comply
Load Resistance Test Al-Wasail (Method) Kg 250 Shall Comply
3.MECHANICAL/PHYSICAL CHARACTERISTICS
Tensile Strength ASTM D638 Bar 385 to 504 Shall Comply
Flexural Modulus Bar Shall Comply
2
Notched Izod Impact Strength ASTM D256 Ft-lbs/In 0.5 to 20 Shall Comply
Deflection Temperature ASTM D648 °F 140 to 170 Shall Comply
3.GEOMETRICAL CHARACTERISTIC

We certify that the product mentioned above shall fully comply with the above mentioned specifications.

__________________
Quality Control Deprt

Revision No: 00 Revised On. 01.05.2016 Page 01 of 01

PRODUCT CATALOGUE
FM/IF/QC/35 Industrial Company

TECHNICAL DATA SHEET

TO WHOM IT MAY CONCERN

Product Description: VALVE BOX-6”GREEN (AL-WASAIL)

Material: HDPE
Manufacturing Standard: ISO & Alwasail Methods
Alwasail Industrial Company certify that the above cited product shall be manufactured,
inspected & tested in accordance with ISO & Alwasail Methods.
Following are the requirement and compliances:
Test Description Ref. Standard Unit Standard Req. Result
1. Raw Material
Characteristics Melt Flow Index ISO - 1133 g/10min 8.0 ± 20% Shall Comply
@230°C/2.160kgs
Density ISO - 1183 g/cm3 6 Shall Comply
Master Batch Green Al-Wasail (Method) % 2.0 Shall Comply
U.V Stabilizer Al-Wasail (Method) % 2.0 Shall Comply
2. MECHANICAL/PHYSICAL CHARACTERISTICS
UV (Resistant ) Direct Sunlight Al-Wasail (Method) Hrs 400 Shall Comply

Falling Test Al-Wasail (Method) Meters 5 Shall Comply

Load Resistance Test Al-Wasail (Method) Kg 128 Shall Comply

3.MECHANICAL/PHYSICAL CHARACTERISTICS
Tensile Strength ASTM D638 Bar 385 to 504 Shall Comply

Flexural Modulus Bar Shall Comply

Notched Izod Impact Strength ASTM D256 Ft-lbs/In2 0.5 to 20 Shall Comply

Deflection Temperature ASTM D648 °F 140 to 170 Shall Comply

4.GEOMETRICAL CHARACTERISTIC

A B C
148mm 223mm 224mm
We certify that the product mentioned above shall fully comply with the above mentioned specifications.

__________________
Quality Control Deprt

Revision No: 00 Revised On. 01.05.2016 Page 01 of 01

FM/IF/QC/35 Industrial Company

TECHNICAL DATA SHEET

TO WHOM IT MAY CONCERN

Product Description: VALVE BOX-10” GREEN, (ALWASAIL)

Material: HDPE
Manufacturing Standard: ISO & Alwasail Methods
Alwasail Industrial Company certifies that the above cited product shall be manufactured,
inspected & tested in accordance with ISO, ASTM standards & Alwasail Methods.

Following are the requirements and compliances:

Test Description Ref. Standard Unit Standard Req. Result
1. Raw Material
Characteristics Melt Flow Index ISO - 1133 g/10min 8.0 ± 20% Shall Comply
@230°C/2.160kgs
Density ISO - 1183 g/cm3 6 Shall Comply
Master Batch Green Alwasail (Method) % 2.0 Shall Comply
U.V Stabilizer Alwasail (Method) % 2.0 Shall Comply
2. MECHANICAL/PHYSICAL CHARACTERISTICS
UV (Resistant ) Direct Sunlight Alwasail (Method) Hrs 400 Shall Comply

Falling Test Alwasail (Method) Meters 5 Shall Comply

Load Resistance Test Alwasail (Method) Kg Shall Comply

3.MECHANICAL/PHYSICAL CHARACTERISTICS
Tensile Strength ASTM D638 Bar 385 to 504 Shall Comply

Flexural Modulus Bar Shall Comply

Notched Izod Impact Strength ASTM D256 Ft-lbs/In2 0.5 to 20 Shall Comply

Deflection Temperature ASTM D648 °F 140 to 170 Shall Comply

4.GEOMETRICAL CHARACTERISTICS

We certify that the product mentioned above shall comply with the above mentioned specifications.

__________________
Quality Department

Revision No: 00 Revised On. 01.05.2016 Page 01 of 01

FM/IF/QC/35 Industrial Company

TECHNICAL DATA SHEET

TO WHOM IT MAY CONCERN

Product Description: VALVE BOX-11” GREEN,Model:1111 (ALWASAIL)

Material: HDPE
Manufacturing Standard: ISO & Alwasail Methods
Alwasail Industrial Company certify that the above cited product shall be manufactured,
inspected & tested in accordance with ISO & Alwasail Methods.
Following are the requirement and compliances:
Test Description Ref. Standard Unit Standard Req. Result
1. Raw Material
Characteristics Melt Flow Index ISO - 1133 g/10min 8.0 ± 20% Shall Comply
@230°C/2.160kgs
Density ISO - 1183 g/cm3 6 Shall Comply
Master Batch Green Alwasail (Method) % 2.0 Shall Comply
U.V Stabilizer Alwasail (Method) % 2.0 Shall Comply
2. MECHANICAL/PHYSICAL CHARACTERISTICS
UV (Resistant ) Direct Sunlight Alwasail (Method) Hrs 400 Shall Comply

Falling Test Alwasail (Method) Meters 5 Shall Comply

Load Resistance Test Alwasail (Method) Kg Shall Comply

3.MECHANICAL/PHYSICAL CHARACTERISTICS
Tensile Strength ASTM D638 Bar 385 to 504 Shall Comply

Flexural Modulus Bar Shall Comply

Notched Izod Impact Strength ASTM D256 Ft-lbs/In2 0.5 to 20 Shall Comply

Deflection Temperature ASTM D648 °F 140 to 170 Shall Comply

4.GEOMETRICAL CHARACTERISTIC

We certify that the product mentioned above shall fully comply with the above mentioned specifications.

__________________
Quality Department

Revision No: 00 Revised On. 01.05.2016 Page 01 of 01

FM/IF/QC/35 Industrial Company

TECHNICAL DATA SHEET

TO WHOM IT MAY CONCERN

Product Description: VALVE BOX-12” GREEN (ALWASAIL)

Material: HDPE
Manufacturing Standard: ISO & Alwasail Methods
Alwasail Industrial Company certifies that the above cited product shall be produced, inspected
& tested in accordance with ISO, ASTM standards & Alwasail Methods.
Following are the requirement and compliances:
Test Description Ref. Standard Unit Standard Req. Result
1. Raw Material
Characteristics Melt Flow Index ISO - 1133 g/10min 8.0 ± 20% Shall Comply
@230°C/2.160kgs
Density ISO - 1183 g/cm3 6 Shall Comply
Master Batch Green Alwasail (Method) % 2 Shall Comply
U.V Stabilizer Alwasail (Method) % 2 Shall Comply
2. MECHANICAL/PHYSICAL CHARACTERISTICS
UV (Resistant ) Direct Sunlight Alwasail (Method) Hrs 400 Shall Comply
Falling Test Alwasail (Method) Meters 5 Shall Comply
Load Resistance Test Alwasail (Method) Kg 400 Shall Comply
3.MECHANICAL/PHYSICAL CHARACTERISTICS
Tensile Strength ASTM D638 Bar 385 to 504 Shall Comply
Flexural Modulus Bar Shall Comply
Notched Izod Impact Strength ASTM D256 Ft-lbs/In2 0.5 to 20 Shall Comply
Deflection Temperature ASTM D648 °F 140 to 170 Shall Comply
4.GEOMETRICAL CHARACTERISTICS

We certify that the product mentioned above shall comply with the above mentioned specifications.

__________________
Quality Department

Revision No: 00 Revised On. 01.05.2016 Page 01 of 01

FM/IF/QC/35 Industrial Company

TECHNICAL DATA SHEET

TO WHOM IT MAY CONCERN

Product Description: VALVE BOX-15” GREEN, Model: 1324 (ALWASAIL) Big Jumbo
Material: HDPE
Manufacturing Standard: ISO & Alwasail Methods
Alwasail Industrial Company certifies that the above cited product shall be produced, inspected
& tested in accordance with ISO, ASTM standards & Alwasail Methods.
Following are the requirement and compliances:
Test Description Ref. Standard Unit Standard Req. Result
1. Raw Material
Characteristics Melt Flow Index ISO - 1133 g/10min 8.0 ± 20% Shall Comply
@230°C/2.160kgs
Density ISO - 1183 g/cm3 6 Shall Comply
Master Batch Green Alwasail (Method) % 2 Shall Comply
U.V Stabilizer Alwasail (Method) % 2 Shall Comply
2. MECHANICAL/PHYSICAL CHARACTERISTICS
UV (Resistant ) Direct Sunlight Alwasail (Method) Hrs 400 Shall Comply
Falling Test Alwasail (Method) Meters 5 Shall Comply
Load Resistance Test Alwasail (Method) Kg 700 Shall Comply
3.MECHANICAL/PHYSICAL CHARACTERISTICS
Tensile Strength ASTM D638 Bar 385 to 504 Shall Comply
Flexural Modulus Bar Shall Comply
2
Notched Izod Impact Strength ASTM D256 Ft-lbs/In 0.5 to 20 Shall Comply
Deflection Temperature ASTM D648 °F 140 to 170 Shall Comply
4.GEOMETRICAL CHARACTERISTICS

We certify that the product mentioned above shall comply with the above mentioned specifications

Quality Department

Revision No: 00 Revised On. 01.05.2016 Page 01 of 01

FM/IF/QC/35 Industrial Company

TECHNICAL DATA SHEET

TO WHOM IT MAY CONCERN

Product Description: VALVE BOX-18” GREEN, Model: 1730 (ALWASAIL) Super Jumbo
Material: HDPE
Manufacturing Standard: ISO & Alwasail Methods
Alwasail Industrial Company certifies that the above cited product shall be produced, inspected
& tested in accordance with ISO, ASTM standards & Alwasail Methods.
Following are the requirement and compliances:
Test Description Ref. Standard Unit Standard Req. Result
1. Raw Material
Characteristics Melt Flow Index ISO - 1133 g/10min 8.0 ± 20% Shall Comply
@230°C/2.160kgs
Density ISO - 1183 g/cm3 6 Shall Comply
Master Batch Green Alwasail (Method) % 2 Shall Comply
U.V Stabilizer Alwasail (Method) % 2 Shall Comply
2. MECHANICAL/PHYSICAL CHARACTERISTICS
UV (Resistant ) Direct Sunlight Alwasail (Method) Hrs 400 Shall Comply
Falling Test Alwasail (Method) Meters 5 Shall Comply
Load Resistance Test Alwasail (Method) Kg 727 Shall Comply
3.MECHANICAL/PHYSICAL CHARACTERISTICS
Tensile Strength ASTM D638 Bar 385 to 504 Shall Comply
Flexural Modulus Bar Shall Comply
Notched Izod Impact Strength ASTM D256 Ft-lbs/In2 0.5 to 20 Shall Comply
Deflection Temperature ASTM D648 °F 140 to 170 Shall Comply
4.GEOMETRICAL CHARACTERISTICS

We certify that the product mentioned above shall comply with the above mentioned specifications.

__________________
Quality Department

Revision No: 00 Revised On. 01.05.2016 Page 01 of 01

FM/IF/QC/35 Industrial Company

TECHNICAL DATA SHEET

TO WHOM IT MAY CONCERN

Product Description: VALVE BOX-20”GREEN (AL-WASAIL)

Material: HDPE
Manufacturing Standard: ISO & Alwasail Methods
Al-Wasail Industrial Company certifies that the above cited product will be produced, inspected
& tested in accordance with ISO & Al-Wasail Methods.
Following are the requirement and compliances:
Test Description Ref. Standard Unit Standard Req. Result
1. Raw Material
Characteristics Melt Flow Index ISO - 1133 g/10min 8.0 ± 20% Shall Comply
@230°C/2.160kgs
Density ISO - 1183 g/cm3 6 Shall Comply
Master Batch Green Al-Wasail (Method) % 2 Shall Comply
U.V Stabilizer Al-Wasail (Method) % 2 Shall Comply
2. MECHANICAL/PHYSICAL CHARACTERISTICS
UV (Resistant ) Direct Sunlight Al-Wasail (Method) Hrs 400 Shall Comply
Falling Test Al-Wasail (Method) Meters 5 Shall Comply
Load Resistance Test Al-Wasail (Method) Kg 250 Shall Comply
3.MECHANICAL/PHYSICAL CHARACTERISTICS
Tensile Strength ASTM D638 Bar 385 to 504 Shall Comply
Flexural Modulus Bar Shall Comply
2
Notched Izod Impact Strength ASTM D256 Ft-lbs/In 0.5 to 20 Shall Comply
Deflection Temperature ASTM D648 °F 140 to 170 Shall Comply
3.GEOMETRICAL CHARACTERISTIC

We certify that the product mentioned above shall fully comply with the above mentioned specifications.

__________________
Quality Control Deprt

Revision No: 00 Revised On. 01.05.2016 Page 01 of 01

PREVIOUS MAS
CO MPANY
PR O F IL E
20 1 7

HDPE PRODUCTS AND

LINING SERVICES

www.alwasail.com
 Alwasail Industrial Co. (www.alwasail.com)

Introduction

Alwasail Industrial Co.

The Pipe & Fitting
Expert

Alwasail manufacturers polyethylene pipes

and fittings; mainly for irrigation, telecom,
drinking water and firefighting networks,
gas and oil transport systems.
2
It also produces rubber products and foam
through its affiliate company Saudi Rubber
Products (SRP).

Alwasail has grown to become one of

the Saudi Arabia’s largest manufac-
turers and suppliers of polyethylene
products serving infrastructure and
irrigation products.
Alwasail Industrial Co. (www.alwasail.com)

PAGE OF CONTENTS

2 I nt roduc t ion

3 Vision a nd M ission 9 Sales & M ar ket ing

4 The Com pa ny 10 P roduc t ion Fac ilit ie s

5 A bout U s 14 A c c reditat ion

6 P roduc t Lines 15 Par t ners & A ffiliate s

8 M a nufa c t ur ing Fa c ilit ies 16 M anagem e nt Te am

OUR VISION AND MISSION

Alwasail’s vision is to become the local market

leader in HDPE pipe and fitting producer serving
contractors and farmers with complete quality
solutions. At the same time, expand its irrigation
business to support landscape and farming re-
quirements through the introduction of its newly
produced or imported items via its
expanding branch network.
 Alwasail Industrial Co. (www.alwasail.com)

truck fleet that makes direct deliveries to its branches and

4 clients.

Alwasail is well known for its quality products; it

emphasizes manufacturing excellence and has been
accredited with ISO 9001 standards and preapproved by
COMPANY BACKGROUND
major companies like Aramco, Sabic, Maaden and many others.

Alwasail started production in Saudi Arabia as “Alwasail Ag- Alwasail Industrial Company produces plastic pipes
ricultural Company” in 1979 producing polyethylene pipes (Polyethylene) of different sizes and lengths for irrigation
for irrigation. It changed its name to Alwasail Industrial systems, drinking water, wastewater, sanitation, gas, electricity
Company in 1990 as it increased its production lines, then conduits and telecom ducts. It also complements its pipe
transformed to a closed Joined Stock Company in 2012 by production with a diverse production program for pipe
increasing its paid up capital to reach SR 250 million. Alwasail fittings and irrigation accessories. Saudi Rubber Prod-
also has a much smaller affiliated company called Saudi Rubber ucts produces rubber rings, joints’ seals. It has recently
Products (SPR) that complements its pipe and fitting commissioned its foam rubber production lines, which
manufacturing line; which specializes in rubber rings produces insulations tubing and flat sheets for air condition-
flat-foam and pipe-foam insulation. ing pipes and ducts respectively.

The company’s head office is in Buraydah, Qassim, with The Company’s management and board of directors
four manufacturing plants for Alwasail and one plant for consists of five members, which are also the shareholders. The
Saudi Rubber. Sales for the past 4 years averaged over SR shareholders are taking steps to develop a professional
300 million annually. The company has more than 550 em- corporate governance structure that institutionalizes the
ployees, 25 branches in the Kingdom and 4 branches in the management of the company. The management
Gulf States and Egypt. The branches are served via a central team consists of experienced engineers, finance and
warehouse and a transport department managing its own management professionals.
Alwasail Industrial Co. (www.alwasail.com)

ABOUT US
ABOUT US
PEOPLE DEVELOPMENT
& EMPLOYMENT

Alwasail is passionate about enabling

people to get the most out of their
employment. The company is as
committed in helping its partners and
clients to get the most out of their
businesses.

PRODUCT & SERVICE

ACCESSIBILITY

Alwasail products are available King-

dom-wide in Saudi Arabia and
internationally on its sales networks.

The company has 25 local branches in 5

KSA and 4 international branches in UAE
and Egypt.
Alwasail served industries include:
Alwasail products reached:
• Water (Potable, Non Potable, Supply lines-Sewage) • 5 Continents and 31 Countries
• Sea Water( Intake-Outfalls)
• Oil and Gas Infrastructures
• Irrigations (landscapes and agricultural)
CUSTOMER EXCELLENCE
• Communications
• Firefighting & QUALITY ASSURANCE
• Power Supply Cables Protection

Alwasail is diligent about understand-

ing and fulfilling its partners’ and
customers’ needs. The company strives
to please them with excellence in qual-
ity and services.

When a client or a potential client wants

to buy us products, it is our standard
procedure to help find the best solution
to its needs.
 Alwasail Industrial Co. (www.alwasail.com)

The company has the following major product lines that transform into thousands of end use products:

1. High Density Polyethylene Pipes (HDPE) and Low Density Polyethylene Pipes (LDPE) of all sizes up to 1,200mm with fittings
used for water, firefighting, gas, wastewater, irrigation, electrical ducts and telecom.
2. Lining pipes of all grades and material to meet client’s uses, including high temperature and chemical resistant
applications.
3. Corrugate Pipes, mainly used as wastewater and conduit for electrical and telecom applications.

6 Irrigation Potable Water Industrial Pipes

Alwasail irrigation products include Aside from pressure pipes, Alwasail Industrial pipes category includes RTP
fittings, clamp saddles, valve boxes, also supplies fittings that are based on pipes, relining pipes, and firefighting
tools and accessories used for irriga- either butt-welding or electro-fusion applications.
tion systems. for potable water systems.

We have a wide range of resources for our products. These include brochures, specification documents, and more to aid
you in specifying and installing our products.
Alwasail Industrial Co. (www.alwasail.com)

4. Fittings and accessories to its pipelines and irrigation systems and industry.
5. Linking installations services in association with its lining installation partners.
6. Rubber and foam insulations for pipes and ducts.

The products are produced through extrusion or injection molding applications. A complete list of produced
product portfolio is available in its catalogues and website (www.alwasail.com).

Telecom & Electrical Gas Wastewater 7

Alwasail manufactures microducts with The company is also manufacturing Wastewater products includes
variety of sizes, corrugated pipes and high quality gas pipes for gas infra- manufacturing drainage pipes and
electrical products such as electrical structure. accessories for sewers and drainage
box, sunk box and cable clips. structures.
 Alwasail Industrial Co. (www.alwasail.com)

The manufacturing facilities that produces these

major product lines, lie on 5 manufacturing sites
with over 125,000 sq. meters with complete raw
material and finished goods storage facilities
(silos and hangers) and other support service.

For the extrusion and injection molding there

are 100 production lines with more than 200
on-shelf molds. The rubber and insulation
production has 4 lines for rubber seals and 6 lines
for foam insulation.

The factory has top of the line testing labora-

tories equipped with all required instrumenta-
tion to test and comply with the most stringent
requirements. It has complete quality control
& engineering systems and proper staff to com-
ply with all accreditation testing and procedural
8 requirements. The laboratory is marked to
have an upgrade and transformation to become
a third party testing approved laboratory and
service center.
Alwasail Industrial Co. (www.alwasail.com)

Sales & Marketing

Alwasail is ranked as one of the top manufacturers of pipes and fittings in the Kingdom. It sells its
products through 3 main channels:

1. Contractors for civil works,

2. Retails to farmers and small contractors through its branches, and
3. Export sales.

It has 25 branches in the Kingdom and plans to open another 2 in 2017. These branches cover the entire Kingdom and bring
cash sales to the company. The company also has 4 international branches in Egypt and UAE.

9
 Alwasail Industrial Co. (www.alwasail.com)

Pipes Extrusion Plant (A)

• 10 High Speed Extrusion Lines with full

automatic coilers
• Irrigation and communication pipes
• Full automatic materials feeding systems
• Coils-Drums pipes lengths up to 2000 mts
• Drip irrigation pipes with built-in emitters
• Daily Production Capacity 50 Tons
• Sizes 3mm to 63 mm

10
Pipes Extrusion Plant (B)

• 18 High Speed Extrusion Lines with full

automatic coilers
• Sizes 20mm to 110mm
• Multi Layers communication pipes
• Coils-Drums pipes lengths up to 2000 mts
• Pipes with built In rope
• Daily Production Capacity 95 Tons
• Full automatic materials feeding systems
Alwasail Industrial Co. (www.alwasail.com)

Pipes Extrusion Plant (C)

• 18 Extrusion Lines equipped with large coilers

• Sizes 110 mm to 1200 mm
• Water-Sewage-Communication pipes
• Coils-Drum-Pcs pipes
• 200 mm pipes in coils
• Double wall corrugated pipes up to 280 mm
• Daily Production Capacity 150 Tons
• Full automatic materials feeding systems

11
Injection Molding Plant

• 47 Injection molding machines

• 2000 products
• +2000 molds
• Multiple engineering materials
• Water-Sewage-Communication-Irrigation fittings
• Injection machines Sizes up to 1300 tons
• Products weight up to 30kg
• Daily Production Capacity 20 Tons
 Alwasail Industrial Co. (www.alwasail.com)

Production Facilities
FABRICATION FACILITIES

• High precise welding and cutting tools

• Ability to produce fittings as per customer requests
• Water-Sewage-Irrigation fittings

TOOLS WORKSHOP

• High precise machines

• Molds-tools-spare parts fabrication facility
• Highly skilled team in both design and
executing processes
12
• High technology cad cam systems
Alwasail Industrial Co. (www.alwasail.com)

LOGISTIC FACILITIES

Transportation
• +40 Heavy Trucks supply products wherever needed

Branches
• +25 Local branches and agents all around the region

Warehouses
• +125,000 m2 in main warehouses in addition to the
branches
• warehouses to cover immediate requests

QUALITY CONTROL FACILITIES

• 2 Quality control labs

• All products observed through production journey
from raw material to products 24/7 running tests
• Products have been certified globally 13
• All raw materials are required for incoming
inspection
• All products have to pass-through with quality
control checks such as first piece, online and final
before release.
 Alwasail Industrial Co. (www.alwasail.com)

Alwasail is keen on keeping the most stringent accreditations and certificates for its products as they are required by
14
contractors and best practices, starting from being an ISO 9001-2015 certified company and accredited by domestic, European and
American certification bodies for many of its product lines. The companies are Saudi Aramco, Ma’aden, NWC, SWCC and many
others approved vendor for key products and has the proper accreditations to produce water and gas lines in accordance to
international standards. A complete list of accreditations is available in its technical prequalification document.

Alwasail strives to meet the highest quality control commitment to its customers by providing the highest quality products and
services.

Certificates
Alwasail Industrial Co. (www.alwasail.com)

Partners & Affiliates

Our Active and Loyal Partners and Customers

We proudly serve and collaborate with many industries and brands throughout Saudi Arabia and international
companies. Below are some of our major clients.

Customers

15

Partners

Sharing success with our partners is one of the Alwasail’s goals to sustain the needs of the company. Being part of our group
always brings pride and pleasure to the company.
 Alwasail Industrial Co. (www.alwasail.com)

The Board of Directors

16

Abdul Rahman Almushekih

Chairman of Board of Directors

Nasser Almushekih Abdul Aziz Almushekih

Board of Director Board of Director

Saleh Almushekih Abdul Kader Almushekih

Managing and Board of Director Board of Director
Alwasail Industrial Co. (www.alwasail.com)

The board hired a qualified CEO, Eng. Saad Alrayes, who is an Industrial Engineer and an Ex-Banker, with
local and international manufacturing, restructuring and banking experience. He is the US post graduate from
Columbia University, NY, an ex-financial consultant and an IFC-World Bank projects’ officer. During his
leadership and brief duration at Alwasail, positive changes has already taken place as planned; mainly
introducing and implementing a complete ERP system, cleaning the company financials to reflect its status
and potential, hiring new qualified staff in key positions, and introducing systematic procedures and a new
management team to enhance productivity and management best practices. All enhancements reflected
well on the company performance and readiness to face 2017 challenges.

The CEO and the Department Managers

Saad Alrayes
Chief Executive Officer (CEO)

17

Siddig Elgillani Saleh Fahad Almushekih Khawar Munir

Production Manager General Manager Factory Finance Manager

Tahseen Yasin Mughal Mohamed Abdelwahab Abdullah Gamma

I.T. Manager Sales & Marketing Regional Purchase & Procurement
Manager (Western Region) Manager

Maged Askar Abdultawab Almushiyagah Sameh Elefify

Sales & Marketing Regional HR & Administration Manager Chief Accountant
Manager (East & North Region)
CONTACT US

First Industrial City

Buraydah, KSA.e

Customer Service
920027777

[email protected]

www.alwasail.com

Alwasail Industrial Company

 ‫ﺷﻬﺎﺩﺓ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
Commercial Registration
Certificate

CR Number 1331768 1331768 ‫ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬

Commercial Name ‫ﺍﻻﺳﻢ ﺍﻟﺘﺠﺎﺭﻱ‬
‫ﺷﺮﻛﺔ ﺍﻟﻮﺳﺎﺋﻞ ﺍﻟﺼﻨﺎﻋﻴﺔ ﺵ ﻡ ﻡ‬

Legal Type Limited Liability Company ‫ﺷﺮﻛﺔ ﻣﺤﺪﻭﺩﺓ ﺍﻟﻤﺴﺆﻭﻟﻴﺔ‬ ‫ﺍﻟﺸﻜﻞ ﺍﻟﻘﺎﻧﻮﻧﻲ‬

Head Q Al Khuwair / Bousher / Muscat Governorate ‫ ﻣﺤﺎﻓﻈﺔ ﻣﺴﻘﻂ‬/ ‫ ﺑﻮﺷﺮ‬/ ‫ﺍﻟﺨﻮﻳﺮ‬

‫ﺍﻟﻤﺮﻛﺰ ﺍﻟﺮﺋﻴﺴﻲ‬
P.O.Box: 3016 Postal Code: 112 112 :‫ﺭﻣﺰ ﺑﺮﻳﺪﻱ‬ 3016 :‫ﺏ‬.‫ﺹ‬
Telephone: 968 71744949 968 71744949 :‫ﻫﺎﺗﻒ‬
Email: [email protected] [email protected] :‫ﺍﻟﺒﺮﻳﺪ ﺍﻹﻟﻜﺘﺮﻭﻧﻲ‬

Establishment Date: 25/11/2018 25/11/2018 :‫ﺗﺎﺭﻳﺦ ﺍﻟﺘﺄﺳﻴﺲ‬

Registration Date: 29/11/2018 Active ‫ﻧﺸﻂ‬ 29/11/2018 ‫ﺗﺎﺭﻳﺦ ﺍﻟﺘﺴﺠﻴﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
Expiry Date: 25/11/2023 25/11/2023 :‫ﺗﺎﺭﻳﺦ ﺍﻧﺘﻬﺎﺀ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
Fiscal Year End: 31/12 12/31 :‫ﺗﺎﺭﻳﺦ ﺍﻧﺘﻬﺎﺀ ﺍﻟﺴﻨﺔ ﺍﻟﻤﺎﻟﻴﺔ‬
Cash Capital: 100,000 100,000 :‫ﺭﺃﺱ ﺍﻟﻤﺎﻝ ﺍﻟﻨﻘﺪﻱ‬
Kind Capital: 0 0 :‫ﺭﺃﺱ ﺍﻟﻤﺎﻝ ﺍﻟﻌﻴﻨﻲ‬
Total Capital (Omani Riyal): 100,000 100,000 :(‫ﺭﺃﺱ ﺍﻟﻤﺎﻝ ﺍﻟﻜﻠﻲ )ﺑﺎﻟﺮﻳﺎﻝ ﺍﻟﻌﻤﺎﻧﻲ‬
No. of Shares: 100000 100000 :‫ﻋﺪﺩ ﺍﻷﺳﻬﻢ‬

The Commercial Registration is not considered as an approval or a ‫ﻻ ﻳﻌﺘﺒﺮ ﻫﺬﺍ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ ﻣﻮﺍﻓﻘﺔ ﺃﻭ ﺿﻤﺎﻧﺎ ﻟﻠﺤﺼﻮﻝ ﻋﻠﻰ ﺗﺮﺧﻴﺺ ﺑﺎﺳﺘﻘﺪﺍﻡ ﻗﻮﻯ‬
warranty for a license of bringing in labour. .‫ﻋﺎﻣﻠﺔ ﻭﺍﻓﺪﺓ‬
: ‫ﺇﻋﺎﺩﺓ ﻃﺒﺎﻋﺔ‬

MANAR ALI RASHID

‫ﺃﻣﺎﻧﺔ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
Page 1 of 7 7‫ﻣﻦ‬ 1 ‫ﺻﻔﺤﺔ‬
12/11/2021

Email: [email protected]: ‫ ﺍﻟﺒﺮﻳﺪ ﺍﻹﻟﻜﺘﺮﻭﻧﻲ‬,

Investors Service Department Website: www.investeasy.gov.om :‫ﻣﻮﻗﻊ ﺩﺍﺋﺮﺓ ﺧﺪﻣﺎﺕ ﺍﻟﻤﺴﺘﺜﻤﺮﻳﻦ‬
F: http://facebook.com/investeasy.oman, T: twitter.com/invest_easy, call center: 2481 7210 :‫ﻣﺮﻛﺰ ﺍﻻﺗﺼﺎﻝ‬
 ‫ﺷﻬﺎﺩﺓ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
Commercial Registration
Certificate

CR Number 1331768 1331768 ‫ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬

Tax Registration Number: 1398444 1398444 :‫ﺭﻗﻢ ﺍﻟﺘﺴﺠﻴﻞ ﺍﻟﻀﺮﻳﺒﻲ‬

Registered Commercial Activities ‫ﺍﻷﻧﺸﻄﺔ ﺍﻟﺘﺠﺎﺭﻳﺔ ﺍﻟﻤﺴﺠﻠﺔ‬

477309:Retail sale in specialized stores of pipes and their
‫ﺍﻟﺒﻴﻊ ﺑﺎﻟﺘﺠﺰﺋﺔ ﻓﻲ ﺍﻟﻤﺘﺎﺟﺮ ﺍﻟﻤﺘﺨﺼﺼﺔ ﻟﻸﻧﺎﺑﻴﺐ ﻭﻣﺴﺘﻠﺰﻣﺎﺗﻬﺎ‬:477309
supplies

The Commercial Registration is not considered as an approval or a ‫ﻻ ﻳﻌﺘﺒﺮ ﻫﺬﺍ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ ﻣﻮﺍﻓﻘﺔ ﺃﻭ ﺿﻤﺎﻧﺎ ﻟﻠﺤﺼﻮﻝ ﻋﻠﻰ ﺗﺮﺧﻴﺺ ﺑﺎﺳﺘﻘﺪﺍﻡ ﻗﻮﻯ‬
warranty for a license of bringing in labour. .‫ﻋﺎﻣﻠﺔ ﻭﺍﻓﺪﺓ‬
: ‫ﺇﻋﺎﺩﺓ ﻃﺒﺎﻋﺔ‬

MANAR ALI RASHID

‫ﺃﻣﺎﻧﺔ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
Page 2 of 7 7‫ﻣﻦ‬ 2 ‫ﺻﻔﺤﺔ‬
12/11/2021

Email: [email protected]: ‫ ﺍﻟﺒﺮﻳﺪ ﺍﻹﻟﻜﺘﺮﻭﻧﻲ‬,

Investors Service Department Website: www.investeasy.gov.om :‫ﻣﻮﻗﻊ ﺩﺍﺋﺮﺓ ﺧﺪﻣﺎﺕ ﺍﻟﻤﺴﺘﺜﻤﺮﻳﻦ‬
F: http://facebook.com/investeasy.oman, T: twitter.com/invest_easy, call center: 2481 7210 :‫ﻣﺮﻛﺰ ﺍﻻﺗﺼﺎﻝ‬
 ‫ﺷﻬﺎﺩﺓ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
Commercial Registration
Certificate

CR Number 1331768 1331768 ‫ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬

Registered Commercial Activities ‫ﺍﻷﻧﺸﻄﺔ ﺍﻟﺘﺠﺎﺭﻳﺔ ﺍﻟﻤﺴﺠﻠﺔ‬

ISIC Registration Date: 29/11/2018 29/11/2018 :‫ﺗﺎﺭﻳﺦ ﺗﺴﺠﻴﻞ ﺍﻟﻨﺸﺎﻁ‬

‫ﻋﺪﺩ ﺃﻣﺎﻛﻦ ﻣﻤﺎﺭﺳﺔ ﺍﻟﻨﺸﺎﻁ‬

Number of POA Registered: 1 1
:‫ﺍﻟﻤﺴﺠﻠﺔ ﻟﻬﺬﺍ ﺍﻟﻨﺸﺎﻁ‬

License Required: Yes ‫ﻧﻌﻢ‬ :‫ﻳﺘﻄﻠﺐ ﺗﺮﺧﻴﺺ‬

Places of Activities ‫ﺃﻣﺎﻛﻦ ﺍﻷﻧﺸﻄﺔ‬

Reg. Date: 08/01/2019 ID: 45574356 45574356 :‫ﺍﻟﺮﻣﺰ‬ 08/01/2019 :‫ﺗﺎﺭﻳﺦ ﺗﺴﺠﻴﻞ‬
Bait Alfalaj / Muttrah / Muscat Governorate ‫ ﻣﺤﺎﻓﻈﺔ ﻣﺴﻘﻂ‬/ ‫ ﻣﻄﺮﺡ‬/ ‫ﺑﻴﺖ ﺍﻟﻔﻠﺞ‬

477309:Retail sale in specialized stores of pipes and their supplies ‫ﺍﻟﺒﻴﻊ ﺑﺎﻟﺘﺠﺰﺋﺔ ﻓﻲ ﺍﻟﻤﺘﺎﺟﺮ ﺍﻟﻤﺘﺨﺼﺼﺔ ﻟﻸﻧﺎﺑﻴﺐ ﻭﻣﺴﺘﻠﺰﻣﺎﺗﻬﺎ‬:477309

The Commercial Registration is not considered as an approval or a ‫ﻻ ﻳﻌﺘﺒﺮ ﻫﺬﺍ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ ﻣﻮﺍﻓﻘﺔ ﺃﻭ ﺿﻤﺎﻧﺎ ﻟﻠﺤﺼﻮﻝ ﻋﻠﻰ ﺗﺮﺧﻴﺺ ﺑﺎﺳﺘﻘﺪﺍﻡ ﻗﻮﻯ‬
warranty for a license of bringing in labour. .‫ﻋﺎﻣﻠﺔ ﻭﺍﻓﺪﺓ‬
: ‫ﺇﻋﺎﺩﺓ ﻃﺒﺎﻋﺔ‬

MANAR ALI RASHID

‫ﺃﻣﺎﻧﺔ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
Page 3 of 7 7‫ﻣﻦ‬ 3 ‫ﺻﻔﺤﺔ‬
12/11/2021

Email: [email protected]: ‫ ﺍﻟﺒﺮﻳﺪ ﺍﻹﻟﻜﺘﺮﻭﻧﻲ‬,

Investors Service Department Website: www.investeasy.gov.om :‫ﻣﻮﻗﻊ ﺩﺍﺋﺮﺓ ﺧﺪﻣﺎﺕ ﺍﻟﻤﺴﺘﺜﻤﺮﻳﻦ‬
F: http://facebook.com/investeasy.oman, T: twitter.com/invest_easy, call center: 2481 7210 :‫ﻣﺮﻛﺰ ﺍﻻﺗﺼﺎﻝ‬
 ‫ﺷﻬﺎﺩﺓ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
Commercial Registration
Certificate

CR Number 1331768 1331768 ‫ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬

Partneoard Members/Authorized Managers ‫ﺃﻋﻀﺎﺀ ﻣﺠﻠﺲ ﺍﻹﺩﺍﺭﺓ‬/‫ﺃﺳﻤﺎﺀ ﺍﻟﺸﺮﻛﺎﺀ‬

SALEH 'ABDALLAH ABDUL AZIZ AL-
Name MASHIQAH
‫ﺻﺎﻟﺢ ﻋﺒﺪﺍﻟﻠﻪ ﻋﺒﺪﺍﻟﻌﺰﻳﺰ ﺍﻟﻤﺸﻴﻘﺢ‬ ‫ﺍﻻﺳﻢ‬
Nationality: Saudi Arabia Kingdom ‫ﺍﻟﻤﻤﻠﻜﺔ ﺍﻟﻌﺮﺑﻴﺔ ﺍﻟﺴﻌﻮﺩﻳﺔ‬ :‫ﺍﻟﺠﻨﺴﻴﺔ‬

ID Number: 116509604 116509604 :‫ﺭﻗﻢ ﺍﻟﻬﻮﻳﺔ‬

Passport No.: T693128 T693128 :‫ﺭﻗﻢ ﺟﻮﺍﺯ ﺍﻟﺴﻔﺮ‬

Designation: Limited Liability Partner ‫ﺷﺮﻳﻚ ﻣﺤﺪﻭﺩ ﺍﻟﻤﺴﺆﻭﻟﻴﺔ‬ :‫ﺍﻟﺼﻔﺔ‬

Registration Date: 29/11/2018 29/11/2018 : ‫ﺗﺎﺭﻳﺦ ﺍﻟﺘﺴﺠﻴﻞ‬
Num. and Perc. Shares: 50000 (50.000%) (50.000%) 50000 : ‫ﻋﺪﺩ ﻭﻧﺴﺒﺔ ﺍﻟﺤﺼﺺ‬

Name AL MUSHAYQIH ABDULAZIZ ABDULLAHA ‫ﻋﺒﺪﺍﻟﻌﺰﻳﺰ ﺑﻦ ﻋﺒﺪﺍﻟﻠﻪ ﺑﻦ ﻋﺒﺪﺍﻟﻌﺰﻳﺰ ﺍﻟﻤﺸﻴﻘﺢ‬ ‫ﺍﻻﺳﻢ‬

Nationality: Saudi Arabia Kingdom ‫ﺍﻟﻤﻤﻠﻜﺔ ﺍﻟﻌﺮﺑﻴﺔ ﺍﻟﺴﻌﻮﺩﻳﺔ‬ :‫ﺍﻟﺠﻨﺴﻴﺔ‬

ID Number: :‫ﺭﻗﻢ ﺍﻟﻬﻮﻳﺔ‬

Passport No.: 176428 176428 :‫ﺭﻗﻢ ﺟﻮﺍﺯ ﺍﻟﺴﻔﺮ‬

Designation: Limited Liability Partner ‫ﺷﺮﻳﻚ ﻣﺤﺪﻭﺩ ﺍﻟﻤﺴﺆﻭﻟﻴﺔ‬ :‫ﺍﻟﺼﻔﺔ‬

Registration Date: 29/11/2018 29/11/2018 : ‫ﺗﺎﺭﻳﺦ ﺍﻟﺘﺴﺠﻴﻞ‬
Num. and Perc. Shares: 50000 (50.000%) (50.000%) 50000 : ‫ﻋﺪﺩ ﻭﻧﺴﺒﺔ ﺍﻟﺤﺼﺺ‬

The Commercial Registration is not considered as an approval or a ‫ﻻ ﻳﻌﺘﺒﺮ ﻫﺬﺍ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ ﻣﻮﺍﻓﻘﺔ ﺃﻭ ﺿﻤﺎﻧﺎ ﻟﻠﺤﺼﻮﻝ ﻋﻠﻰ ﺗﺮﺧﻴﺺ ﺑﺎﺳﺘﻘﺪﺍﻡ ﻗﻮﻯ‬
warranty for a license of bringing in labour. .‫ﻋﺎﻣﻠﺔ ﻭﺍﻓﺪﺓ‬
: ‫ﺇﻋﺎﺩﺓ ﻃﺒﺎﻋﺔ‬

MANAR ALI RASHID

‫ﺃﻣﺎﻧﺔ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
Page 4 of 7 7‫ﻣﻦ‬ 4 ‫ﺻﻔﺤﺔ‬
12/11/2021

Email: [email protected]: ‫ ﺍﻟﺒﺮﻳﺪ ﺍﻹﻟﻜﺘﺮﻭﻧﻲ‬,

Investors Service Department Website: www.investeasy.gov.om :‫ﻣﻮﻗﻊ ﺩﺍﺋﺮﺓ ﺧﺪﻣﺎﺕ ﺍﻟﻤﺴﺘﺜﻤﺮﻳﻦ‬
F: http://facebook.com/investeasy.oman, T: twitter.com/invest_easy, call center: 2481 7210 :‫ﻣﺮﻛﺰ ﺍﻻﺗﺼﺎﻝ‬
 ‫ﺷﻬﺎﺩﺓ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
Commercial Registration
Certificate

CR Number 1331768 1331768 ‫ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬

Authorized Managers and Signatories ‫ﺃﺳﻤﺎﺀ ﺍﻟﻤﻔﻮﺿﻴﻦ ﺑﺎﻹﺩﺍﺭﺓ ﻭ ﺍﻟﺘﻮﻗﻴﻊ‬

Name YOUSSEF MOHAMMAD ALMHAWESH ‫ﻳﻮﺳﻒ ﻣﺤﻤﺪ ﺍﻟﻤﻬﺎﻭﺵ‬ ‫ﺍﻻﺳﻢ‬
Nationality: Syrian Arab Republic ‫ﺳﻮﺭﻳﺎ‬ :‫ﺍﻟﺠﻨﺴﻴﺔ‬
ID Number: 86683678 86683678 :‫ﺭﻗﻢ ﺍﻟﻬﻮﻳﺔ‬
Passport No.: N012147403 N012147403 :‫ﺭﻗﻢ ﺟﻮﺍﺯ ﺍﻟﺴﻔﺮ‬
Designation: Authorized Manager - Sole ‫ ﻣﻨﻔﺮﺩ‬- ‫ﻣﺪﻳﺮ ﻣﻔﻮﺽ‬ :‫ﺻﻔﺔ ﺍﻟﺘﻔﻮﻳﺾ‬
Authorization Type: Full ‫ﻣﻄﻠﻖ‬ :‫ﻧﻮﻋﻴﺔ ﺍﻟﺘﻔﻮﻳﺾ‬
Authorization Limit: Unlimited ‫ﻏﻴﺮ ﻣﺤﺪﻭﺩﺓ‬ :‫ﺣﺪﻭﺩ ﺍﻟﺘﻔﻮﻳﺾ‬
Registration Date: 10/11/2021 10/11/2021 : ‫ﺗﺎﺭﻳﺦ ﺍﻟﺘﺴﺠﻴﻞ‬
Name MANAR ALI RASHID ALI AL KALBANI ‫ﺍﻻﺳﻢ ﻣﻨﺎﺭ ﻋﻠﻲ ﺭﺍﺷﺪ ﻋﻠﻲ ﺍﻟﻜﻠﺒﺎﻧﻴﺔ‬

Nationality: Sultanate of Oman ‫ﺳﻠﻄﻨﺔ ﻋﻤﺎﻥ‬ :‫ﺍﻟﺠﻨﺴﻴﺔ‬

ID Number: 9130052 9130052 :‫ﺭﻗﻢ ﺍﻟﻬﻮﻳﺔ‬
Passport No.: 01408836 01408836 :‫ﺭﻗﻢ ﺟﻮﺍﺯ ﺍﻟﺴﻔﺮ‬
Designation: Authorized Manager - Sole ‫ ﻣﻨﻔﺮﺩ‬- ‫ﻣﺪﻳﺮ ﻣﻔﻮﺽ‬ :‫ﺻﻔﺔ ﺍﻟﺘﻔﻮﻳﺾ‬
Authorization Type: Full ‫ﻣﻄﻠﻖ‬ :‫ﻧﻮﻋﻴﺔ ﺍﻟﺘﻔﻮﻳﺾ‬
Authorization Limit: Unlimited ‫ﻏﻴﺮ ﻣﺤﺪﻭﺩﺓ‬ :‫ﺣﺪﻭﺩ ﺍﻟﺘﻔﻮﻳﺾ‬
Registration Date: 16/03/2021 16/03/2021 : ‫ﺗﺎﺭﻳﺦ ﺍﻟﺘﺴﺠﻴﻞ‬
Name AL MUSHAYQIH ABDULAZIZ ABDULLAHA ‫ﺍﻻﺳﻢ ﻋﺒﺪﺍﻟﻌﺰﻳﺰ ﺑﻦ ﻋﺒﺪﺍﻟﻠﻪ ﺑﻦ ﻋﺒﺪﺍﻟﻌﺰﻳﺰ ﺍﻟﻤﺸﻴﻘﺢ‬

Nationality: Saudi Arabia Kingdom ‫ﺍﻟﻤﻤﻠﻜﺔ ﺍﻟﻌﺮﺑﻴﺔ ﺍﻟﺴﻌﻮﺩﻳﺔ‬ :‫ﺍﻟﺠﻨﺴﻴﺔ‬

ID Number: :‫ﺭﻗﻢ ﺍﻟﻬﻮﻳﺔ‬
Passport No.: 176428 176428 :‫ﺭﻗﻢ ﺟﻮﺍﺯ ﺍﻟﺴﻔﺮ‬
Designation: Authorized Partner - Sole ‫ ﻣﻨﻔﺮﺩ‬- ‫ ﺷﺮﻳﻚ ﻣﻔﻮﺽ‬:‫ﺻﻔﺔ ﺍﻟﺘﻔﻮﻳﺾ‬
Authorization Type: Full ‫ ﻣﻄﻠﻖ‬:‫ﻧﻮﻋﻴﺔ ﺍﻟﺘﻔﻮﻳﺾ‬
Authorization Limit: Unlimited ‫ ﻏﻴﺮ ﻣﺤﺪﻭﺩﺓ‬:‫ﺣﺪﻭﺩ ﺍﻟﺘﻔﻮﻳﺾ‬

Registration Date: 29/11/2018 29/11/2018 : ‫ﺗﺎﺭﻳﺦ ﺍﻟﺘﺴﺠﻴﻞ‬

The Commercial Registration is not considered as an approval or a ‫ﻻ ﻳﻌﺘﺒﺮ ﻫﺬﺍ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ ﻣﻮﺍﻓﻘﺔ ﺃﻭ ﺿﻤﺎﻧﺎ ﻟﻠﺤﺼﻮﻝ ﻋﻠﻰ ﺗﺮﺧﻴﺺ ﺑﺎﺳﺘﻘﺪﺍﻡ ﻗﻮﻯ‬
warranty for a license of bringing in labour. .‫ﻋﺎﻣﻠﺔ ﻭﺍﻓﺪﺓ‬
: ‫ﺇﻋﺎﺩﺓ ﻃﺒﺎﻋﺔ‬

MANAR ALI RASHID

‫ﺃﻣﺎﻧﺔ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
Page 5 of 7 7‫ﻣﻦ‬ 5 ‫ﺻﻔﺤﺔ‬
12/11/2021

Email: [email protected]: ‫ ﺍﻟﺒﺮﻳﺪ ﺍﻹﻟﻜﺘﺮﻭﻧﻲ‬,

Investors Service Department Website: www.investeasy.gov.om :‫ﻣﻮﻗﻊ ﺩﺍﺋﺮﺓ ﺧﺪﻣﺎﺕ ﺍﻟﻤﺴﺘﺜﻤﺮﻳﻦ‬
F: http://facebook.com/investeasy.oman, T: twitter.com/invest_easy, call center: 2481 7210 :‫ﻣﺮﻛﺰ ﺍﻻﺗﺼﺎﻝ‬
 ‫ﺷﻬﺎﺩﺓ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
Commercial Registration
Certificate

CR Number 1331768 1331768 ‫ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬

Name SALEH 'ABDALLAH ABDUL AZIZ AL-MASHIQAH ‫ﺻﺎﻟﺢ ﻋﺒﺪﺍﻟﻠﻪ ﻋﺒﺪﺍﻟﻌﺰﻳﺰ ﺍﻟﻤﺸﻴﻘﺢ‬ ‫ﺍﻻﺳﻢ‬
Nationality: Saudi Arabia Kingdom ‫ﺍﻟﻤﻤﻠﻜﺔ ﺍﻟﻌﺮﺑﻴﺔ ﺍﻟﺴﻌﻮﺩﻳﺔ‬ :‫ﺍﻟﺠﻨﺴﻴﺔ‬
ID Number: 116509604 116509604 :‫ﺭﻗﻢ ﺍﻟﻬﻮﻳﺔ‬
Passport No.: T693128 T693128 :‫ﺭﻗﻢ ﺟﻮﺍﺯ ﺍﻟﺴﻔﺮ‬
Designation: Authorized Partner - Sole ‫ ﻣﻨﻔﺮﺩ‬- ‫ﺷﺮﻳﻚ ﻣﻔﻮﺽ‬ :‫ﺻﻔﺔ ﺍﻟﺘﻔﻮﻳﺾ‬
Authorization Type: Full ‫ﻣﻄﻠﻖ‬ :‫ﻧﻮﻋﻴﺔ ﺍﻟﺘﻔﻮﻳﺾ‬
Authorization Limit: Unlimited ‫ﻏﻴﺮ ﻣﺤﺪﻭﺩﺓ‬ :‫ﺣﺪﻭﺩ ﺍﻟﺘﻔﻮﻳﺾ‬
Registration Date: 29/11/2018 29/11/2018 : ‫ﺗﺎﺭﻳﺦ ﺍﻟﺘﺴﺠﻴﻞ‬

Allowed Imported Items ‫ﺍﻟﺴﻠﻊ ﺍﻟﻤﺼﺮﺡ ﺑﺎﺳﺘﻴﺮﺍﺩﻫﺎ‬

Pipes And Their Accessories ‫ﺍﻻﻧﺎﺑﻴﺐ ﻭﻣﺴﺘﻠﺰﻣﺎﺗﻬﺎ‬

The Commercial Registration is not considered as an approval or a ‫ﻻ ﻳﻌﺘﺒﺮ ﻫﺬﺍ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ ﻣﻮﺍﻓﻘﺔ ﺃﻭ ﺿﻤﺎﻧﺎ ﻟﻠﺤﺼﻮﻝ ﻋﻠﻰ ﺗﺮﺧﻴﺺ ﺑﺎﺳﺘﻘﺪﺍﻡ ﻗﻮﻯ‬
warranty for a license of bringing in labour. .‫ﻋﺎﻣﻠﺔ ﻭﺍﻓﺪﺓ‬
: ‫ﺇﻋﺎﺩﺓ ﻃﺒﺎﻋﺔ‬

MANAR ALI RASHID

‫ﺃﻣﺎﻧﺔ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
Page 6 of 7 7‫ﻣﻦ‬ 6 ‫ﺻﻔﺤﺔ‬
12/11/2021

Email: [email protected]: ‫ ﺍﻟﺒﺮﻳﺪ ﺍﻹﻟﻜﺘﺮﻭﻧﻲ‬,

Investors Service Department Website: www.investeasy.gov.om :‫ﻣﻮﻗﻊ ﺩﺍﺋﺮﺓ ﺧﺪﻣﺎﺕ ﺍﻟﻤﺴﺘﺜﻤﺮﻳﻦ‬
F: http://facebook.com/investeasy.oman, T: twitter.com/invest_easy, call center: 2481 7210 :‫ﻣﺮﻛﺰ ﺍﻻﺗﺼﺎﻝ‬
 ‫ﺷﻬﺎﺩﺓ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
Commercial Registration
Certificate

CR Number 1331768 1331768 ‫ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬

Note: :‫ﻣﻼﺣﻈﺎﺕ‬
This certificate is digitally signed. .‫ﻫﺬﻩ ﺍﻟﺸﻬﺎﺩﺓ ﻣﻮﻗﻌﺔ ﺭﻗﻤﻴًﺎ‬
This certificate has been signed and certified using a Digital
‫ﺗﻢ ﺗﻮﻗﻴﻊ ﻭﺍﻋﺘﻤﺎﺩ ﻫﺬﻩ ﺍﻟﺸﻬﺎﺩﺓ ﺑﺎﺳﺘﺨﺪﺍﻡ ﺧﺎﺻﻴﺔ ﺍﻟﺸﻬﺎﺩﺍﺕ ﺍﻟﻤﻮﻗﻌﺔ ﺭﻗﻤﻴًﺎ ﻭﻓﻘﺎ ﻟﻤﺎ ﻫﻮ ﻭﺍﺭﺩ‬
Signature Certificate as specified under The Electronic Transactions
‫ﻓﻲ ﻗﺎﻧﻮﻥ ﺍﻟﻤﻌﺎﻣﻼﺕ ﺍﻹﻟﻜﺘﺮﻭﻧﻴﺔ ﻟﺴﻠﻄﻨﺔ ﻋﻤﺎﻥ ﻭﺍﻟﺼﺎﺩﺭ ﺑﻤﻮﺟﺐ ﺍﻟﻤﺮﺳﻮﻡ ﺍﻟﺴﻠﻄﺎﻧﻲ ﺭﻗﻢ‬
Law of the Sultanate of Oman issued by His Majesty’s Royal
.(2008/69)
Decree (69/2008).

To check the validity and authenticity of the digitally signed ‫ﻳﺮﺟﻰ ﺍﻟﺘﺤﻘﻖ ﻣﻦ ﺻﻼﺣﻴﺔ ﻭﻣﺼﺪﺍﻗﻴﺔ ﺍﻟﻤﺴﺘﻨﺪﺍﺕ ﻭﺍﻟﺸﻬﺎﺩﺍﺕ ﺍﻟﻤﺼﺪﻗﺔ ﺭﻗﻤﻴًﺎ ﻋﻦ‬
documents and certificates, please check the online service of ‫ﻃﺮﻳﻖ ﺍﻟﺨﺪﻣﺎﺕ ﺍﻹﻟﻜﺘﺮﻭﻧﻴﺔ ﺍﻟﻤﻘﺪﻣﺔ ﻣﻦ ﺍﻟﻤﺮﻛﺰ ﺍﻟﻮﻃﻨﻲ ﻟﻠﺘﺼﺪﻳﻖ ﺍﻹﻟﻜﺘﺮﻭﻧﻲ ﻭﺫﻟﻚ‬
National Digital Certification Center at ( www.oman.om/tam ). .( www.oman.om/tam ) ‫ﻋﺒﺮ ﺍﻟﺮﺍﺑﻂ‬

The information in this commercial registration is registered based

on the Commercial Registration Law No. (3/1974). The commercial .(1974/3) ‫ﺗﻢ ﻗﻴﺪ ﺍﻟﻤﻌﻠﻮﻣﺎﺕ ﺑﻬﺬﺍ ﺍﻟﺴﺠﻞ ﺑﻤﻮﺟﺐ ﻗﺎﻧﻮﻥ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ ﺭﻗﻢ‬
registration owner is obligated to obtain the approval of the ‫ﻭﻳﺴﺘﻠﺰﻡ ﻋﻠﻰ ﻣﺎﻟﻜﻪ ﺍﻟﺤﺼﻮﻝ ﻋﻠﻰ ﻣﻮﺍﻓﻘﺔ ﺍﻟﺠﻬﺎﺕ ﺍﻟﻤﺨﺘﺼﺔ ﻗﺒﻞ ﻣﺒﺎﺷﺮﺓ ﺃﻱ ﻧﺸﺎﻁ‬
competent authorities before the commencement of any economic ‫ﺍﻗﺘﺼﺎﺩﻱ ﻣﺘﻰ ﻛﺎﻥ ﺍﻟﻨﺸﺎﻁ ﻣﻘﻴﺪًﺍ ﺑﻤﻮﺍﻓﻘﺔ ﻣﺴﺒﻘﺔ ﺑﻤﺎ ﻓﻲ ﺫﻟﻚ ﺍﺳﺘﻘﺪﺍﻡ ﻭﺗﺸﻐﻴﻞ ﺍﻟﻘﻮﻯ‬
activity when the activity is restricted by prior consent, including the .‫ﺍﻟﻌﺎﻣﻠﺔ ﺍﻟﻮﺍﻓﺪﺓ‬
introduction and operation of foreign labor force.

This certificate proves that this commercial registration has a

membership of Oman Chamber of Commerce and Industry for only ‫ﺷﻬﺎﺩﺓ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ ﺗﺜﺒﺖ ﺃﻥ ﻫﺬﺍ ﺍﻟﺴﺠﻞ ﻣﻨﺘﺴﺐ ﻟﻐﺮﻓﺔ ﺗﺠﺎﺭﺓ ﻭﺻﻨﺎﻋﺔ ﻋﻤﺎﻥ ﻟﻤﺪﺓ‬
one year from registration date. .‫ﻋﺎﻡ ﻭﺍﺣﺪ ﻓﻘﻂ ﻣﻦ ﺗﺎﺭﻳﺦ ﺍﻟﺘﺴﺠﻴﻞ‬

The Commercial Registration and the CR certificate are not

‫ﻻ ﻳﻌﺘﺒﺮ ﺗﺴﺠﻴﻞ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ ﻭﺷﻬﺎﺩﺓ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ ﻣﻮﺍﻓﻘﺔً ﺃﻭ ﺿﻤﺎﻧًﺎ ﻟﻠﺤﺼﻮﻝ‬
considered as an approval or a warranty for a license of bringing in
.‫ﻋﻠﻰ ﺗﺮﺧﻴﺺ ﺑﺎﺳﺘﻘﺪﺍﻡ ﻗﻮﻯ ﻋﺎﻣﻠﺔ ﻭﺍﻓﺪﺓ‬
labour.

The Commercial Registration does not grant an approval or a

‫ﻻ ﻳﻌﺘﺒﺮ ﻫﺬﺍ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ ﻣﻮﺍﻓﻘﺔ ﺃﻭ ﺿﻤﺎﻧﺎً ﻟﻠﺤﺼﻮﻝ ﻋﻠﻰ ﺗﺮﺧﻴﺺ ﺇﻗﺎﻣﺔ‬
guarantee for obtaining an investor's residence permit in the
‫ﺍﻟﻤﺴﺘﺜﻤﺮ ﺑﺎﻟﺴﻠﻄﻨﺔ‬
Sultanate of Oman.

The Commercial Registration is not considered as an approval or a ‫ﻻ ﻳﻌﺘﺒﺮ ﻫﺬﺍ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ ﻣﻮﺍﻓﻘﺔ ﺃﻭ ﺿﻤﺎﻧﺎ ﻟﻠﺤﺼﻮﻝ ﻋﻠﻰ ﺗﺮﺧﻴﺺ ﺑﺎﺳﺘﻘﺪﺍﻡ ﻗﻮﻯ‬
warranty for a license of bringing in labour. .‫ﻋﺎﻣﻠﺔ ﻭﺍﻓﺪﺓ‬
: ‫ﺇﻋﺎﺩﺓ ﻃﺒﺎﻋﺔ‬

MANAR ALI RASHID

‫ﺃﻣﺎﻧﺔ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
Page 7 of 7 7‫ﻣﻦ‬ 7 ‫ﺻﻔﺤﺔ‬
12/11/2021

Email: [email protected]: ‫ ﺍﻟﺒﺮﻳﺪ ﺍﻹﻟﻜﺘﺮﻭﻧﻲ‬,

Investors Service Department Website: www.investeasy.gov.om :‫ﻣﻮﻗﻊ ﺩﺍﺋﺮﺓ ﺧﺪﻣﺎﺕ ﺍﻟﻤﺴﺘﺜﻤﺮﻳﻦ‬
F: http://facebook.com/investeasy.oman, T: twitter.com/invest_easy, call center: 2481 7210 :‫ﻣﺮﻛﺰ ﺍﻻﺗﺼﺎﻝ‬
COUNTRY OF ORIGIN
DRAWING
 N
04 05

05

01 02 03

Way 408
06

CT4 IRRIGATION_SCHEDULE
V-535
V-534 CT4H

MATCHLINE SEE SHEET DWG-INF-3507-ATS-SC-00D-XXX-L86-01-2016-W00

110Ø TSE HDPE PIPE
VALVE TYPE & NO.

DV
TT1-H 50
A
10
CONTROLLER NAME

FLOW RATE (GPM)

SIZE OF VALVE (MM)

IFC DRAWING REFERENCE NO:

160Ø TSE HDPE PIPE * AUTOMATIC IRRIGATION LAYOUT
19-1783-INS-DWG-LAN-27001 TO 27006
* TYPICALE IRRIGATION DETAILS.
19-1783-INS-DWG-LAN-70901
SHOP DRAWING REFERENCE NO:
* TREE PLANTING PLAN
INF-3507-ATS-SC-00D-XXX-L83-01-2001-W00 TO 2006
* SHRUBS&GROUND COVER PLAN
INF-3507-ATS-SC-00D-XXX-L83-01-2007-W00 TO 2012
* IRRIGATION TYPICAL DETAILS
INF-3507-ATS-SC-00D-XXX-L86-01-2021-W00

TT1 * TREATED SEWAGE EFFLUENT LAYOUT (TSE)

INF-3507-ATS-SC-00D-PH1-I05-01-3030-W02
INF-3507-ATS-SC-00D-PH1-I05-01-3030-W02

SHOP DRAWING

4"
M1

DT1 C

PROJECT MANAGEMENT
QUANTITY SURVEYING
40mm 24.7 MAJAN ENGINEERING CONSULTANTS
DV1 C
50mm 107

DV2
50mm
C
V-603
112 P.O. Box 49100, Dubai, UAE. 31st Floor Rolex Tower Sheik Zayed Road.
Tel: (971) 43888440, Fax: (971) 43888440
web: http://www.keoic.com email: [email protected]
V-604

F.F.L+6.100

AL TASNIM ENTERPRISES L.L.C

BUILDING FINISHES DIVISION (LS & IRR)
Central Enquiry : 2421 4000/ 2459 0140,iHelpdesk:2421 4123
Address: P.O. Box - 103,P.C.-113,Muscat,Sultanate of Oman
Quality You Can Build On
Web: www.altasnim.com

SECTOR D, AREA 6,9

LUXURY BOULEVARD
V-605

TSE TSE
CU - 04

CU - 03

AUTOMATIC IRRIGATION LAYOUT

DOG
HOUSE
DOG
HOUSE
(SHEET 1 OF 6)

DOG DOG
HOUSE HOUSE

INF-3507-ATS-SC-00D-XXX-L86-01-2015-W00
 N
04 05

05

01 02 03

Way 408
06

IRRIGATION_SCHEDULE

DT2 C
93.0

DV3 C DT3 C
MATCHLINE SEE SHEET DWG-INF-3507-ATS-SC-00D-XXX-L86-01-2015-W00

MATCHLINE SEE SHEET DWG-INF-3507-ATS-SC-00D-XXX-L86-01-2017-W00

50mm 52.4 50mm 55.3

VALVE TYPE & NO.

DV4 C DV5 C
100Ø TOP-01 REFER DRAWING NO: DV A CONTROLLER NAME
50mm 126 50mm 81.1
INF-3507-ATS-SC-00D-PH1-I05-01-3030-W02
50 10
FLOW RATE (GPM)

IPE SIZE OF VALVE (MM)

P
TSE HDPE
140Ø
M2

4" IFC DRAWING REFERENCE NO:

* AUTOMATIC IRRIGATION LAYOUT
19-1783-INS-DWG-LAN-27001 TO 27006
* TYPICALE IRRIGATION DETAILS.
140Ø TSE HDPE PIPE 19-1783-INS-DWG-LAN-70901
160Ø TSE HDPE PIPE
SHOP DRAWING REFERENCE NO:
* TREE PLANTING PLAN
INF-3507-ATS-SC-00D-XXX-L83-01-2001-W00 TO 2006
* SHRUBS&GROUND COVER PLAN
INF-3507-ATS-SC-00D-XXX-L83-01-2007-W00 TO 2012
* IRRIGATION TYPICAL DETAILS
INF-3507-ATS-SC-00D-XXX-L86-01-2021-W00
* TREATED SEWAGE EFFLUENT LAYOUT (TSE)
INF-3507-ATS-SC-00D-PH1-I05-01-3030-W02
INF-3507-ATS-SC-00D-PH1-I05-01-3030-W02

SHOP DRAWING

PROJECT MANAGEMENT
AP

QUANTITY SURVEYING
N D C 69 MAJAN ENGINEERING CONSULTANTS
Ø E 64.1
110 6125 3.537
N2 3092
E6

P.O. Box 49100, Dubai, UAE. 31st Floor Rolex Tower Sheik Zayed Road.
Tel: (971) 43888440, Fax: (971) 43888440
web: http://www.keoic.com email: [email protected]

AL TASNIM ENTERPRISES L.L.C

BUILDING FINISHES DIVISION (LS & IRR)
Central Enquiry : 2421 4000/ 2459 0140,iHelpdesk:2421 4123
Address: P.O. Box - 103,P.C.-113,Muscat,Sultanate of Oman
Quality You Can Build On
Web: www.altasnim.com

SECTOR D, AREA 6,9

LUXURY BOULEVARD

AUTOMATIC IRRIGATION LAYOUT

(SHEET 2 OF 6)

INF-3507-ATS-SC-00D-XXX-L86-01-2016-W00
 N
MATCHLINE SEE SHEET DWG-INF-3507-ATS-SC-00D-XXX-L86-01-2018-W00 04 05

05

01 02 03

Way 408
IPE
PEP 06
E HD
TS
0Ø
14
IRRIGATION_SCHEDULE

IPE
PEP
HD
SE M
ØT
140
MATCHLINE SEE SHEET DWG-INF-3507-ATS-SC-00D-XXX-L86-01-2016-W00

VALVE TYPE & NO.

DV A CONTROLLER NAME

50 10
FLOW RATE (GPM)
P
D CA SIZE OF VALVE (MM)
N 8
Ø E 0.71
110 1252 11
6 7
N2 1100.
E6 3
IFC DRAWING REFERENCE NO:
* AUTOMATIC IRRIGATION LAYOUT
19-1783-INS-DWG-LAN-27001 TO 27006
* TYPICALE IRRIGATION DETAILS.
19-1783-INS-DWG-LAN-70901
SHOP DRAWING REFERENCE NO:
* TREE PLANTING PLAN
INF-3507-ATS-SC-00D-XXX-L83-01-2001-W00 TO 2006
* SHRUBS&GROUND COVER PLAN
INF-3507-ATS-SC-00D-XXX-L83-01-2007-W00 TO 2012
* IRRIGATION TYPICAL DETAILS
INF-3507-ATS-SC-00D-XXX-L86-01-2021-W00
* TREATED SEWAGE EFFLUENT LAYOUT (TSE)
INF-3507-ATS-SC-00D-PH1-I05-01-3030-W02
INF-3507-ATS-SC-00D-PH1-I05-01-3030-W02

SHOP DRAWING

PROJECT MANAGEMENT
QUANTITY SURVEYING
MAJAN ENGINEERING CONSULTANTS

P.O. Box 49100, Dubai, UAE. 31st Floor Rolex Tower Sheik Zayed Road.
Tel: (971) 43888440, Fax: (971) 43888440
web: http://www.keoic.com email: [email protected]

AL TASNIM ENTERPRISES L.L.C

BUILDING FINISHES DIVISION (LS & IRR)
Central Enquiry : 2421 4000/ 2459 0140,iHelpdesk:2421 4123
Address: P.O. Box - 103,P.C.-113,Muscat,Sultanate of Oman
Quality You Can Build On
Web: www.altasnim.com

SECTOR D, AREA 6,9

LUXURY BOULEVARD

AUTOMATIC IRRIGATION LAYOUT

(SHEET 3 OF 6)

INF-3507-ATS-SC-00D-XXX-L86-01-2017-W00
 N
04 05

05

01 02 03

Way 408
06

IRRIGATION_SCHEDULE

MATCHLINE SEE SHEET DWG-INF-3507-ATS-SC-00D-XXX-L86-01-2019-W00

VALVE TYPE & NO.

DV A CONTROLLER NAME

DV8 C 50 10
FLOW RATE (GPM)
40mm 46.5
SIZE OF VALVE (MM)

DV7 C
40mm 49.0
IFC DRAWING REFERENCE NO:
* AUTOMATIC IRRIGATION LAYOUT
DV6 C 19-1783-INS-DWG-LAN-27001 TO 27006
50mm 61.1 * TYPICALE IRRIGATION DETAILS.
19-1783-INS-DWG-LAN-70901
SHOP DRAWING REFERENCE NO:
DT4 C
* TREE PLANTING PLAN
50mm 59.7 INF-3507-ATS-SC-00D-XXX-L83-01-2001-W00 TO 2006
* SHRUBS&GROUND COVER PLAN
INF-3507-ATS-SC-00D-XXX-L83-01-2007-W00 TO 2012
* IRRIGATION TYPICAL DETAILS
INF-3507-ATS-SC-00D-XXX-L86-01-2021-W00
* TREATED SEWAGE EFFLUENT LAYOUT (TSE)
INF-3507-ATS-SC-00D-PH1-I05-01-3030-W02
100Ø TOP-03 REFER DRAWING NO: INF-3507-ATS-SC-00D-PH1-I05-01-3030-W02
INF-3507-ATS-SC-00D-PH1-I05-01-3031-W02
M3
SHOP DRAWING
4"

PROJECT MANAGEMENT
QUANTITY SURVEYING
MAJAN ENGINEERING CONSULTANTS

P.O. Box 49100, Dubai, UAE. 31st Floor Rolex Tower Sheik Zayed Road.
Tel: (971) 43888440, Fax: (971) 43888440
web: http://www.keoic.com email: [email protected]

E
E PIP
H DP AL TASNIM ENTERPRISES L.L.C
TSE BUILDING FINISHES DIVISION (LS & IRR)
0Ø
14 Central Enquiry : 2421 4000/ 2459 0140,iHelpdesk:2421 4123
Address: P.O. Box - 103,P.C.-113,Muscat,Sultanate of Oman
Quality You Can Build On
Web: www.altasnim.com

SECTOR D, AREA 6,9

LUXURY BOULEVARD

PIP
E AUTOMATIC IRRIGATION LAYOUT
E
DP
TS
EH (SHEET 4 OF 6)
Ø
140

MATCHLINE SEE SHEET DWG-INF-3507-ATS-SC-00D-XXX-L86-01-2017-W00

INF-3507-ATS-SC-00D-XXX-L86-01-2018-W00
 N
04 05

05

01 02 03

Way 408
06

IRRIGATION_SCHEDULE

M
MATCHLINE SEE SHEET DWG-INF-3507-ATS-SC-00D-XXX-L86-01-2018-W00

PE
PI
PE
HD VALVE TYPE & NO.
E
TS
0Ø
14 DV A CONTROLLER NAME

50 10
FLOW RATE (GPM)

SIZE OF VALVE (MM)

IFC DRAWING REFERENCE NO:

* AUTOMATIC IRRIGATION LAYOUT
19-1783-INS-DWG-LAN-27001 TO 27006
PE PIPE
* TYPICALE IRRIGATION DETAILS.
D
140Ø TSE H 19-1783-INS-DWG-LAN-70901
SHOP DRAWING REFERENCE NO:
* TREE PLANTING PLAN
INF-3507-ATS-SC-00D-XXX-L83-01-2001-W00 TO 2006
* SHRUBS&GROUND COVER PLAN
INF-3507-ATS-SC-00D-XXX-L83-01-2007-W00 TO 2012
* IRRIGATION TYPICAL DETAILS
INF-3507-ATS-SC-00D-XXX-L86-01-2021-W00
* TREATED SEWAGE EFFLUENT LAYOUT (TSE)
INF-3507-ATS-SC-00D-PH1-I05-01-3030-W02
INF-3507-ATS-SC-00D-PH1-I05-01-3030-W02

SHOP DRAWING

PROJECT MANAGEMENT
QUANTITY SURVEYING
MAJAN ENGINEERING CONSULTANTS

P.O. Box 49100, Dubai, UAE. 31st Floor Rolex Tower Sheik Zayed Road.
Tel: (971) 43888440, Fax: (971) 43888440
web: http://www.keoic.com email: [email protected]

AL TASNIM ENTERPRISES L.L.C

BUILDING FINISHES DIVISION (LS & IRR)
Central Enquiry : 2421 4000/ 2459 0140,iHelpdesk:2421 4123
Address: P.O. Box - 103,P.C.-113,Muscat,Sultanate of Oman
Quality You Can Build On
Web: www.altasnim.com

SECTOR D, AREA 6,9

LUXURY BOULEVARD

AUTOMATIC IRRIGATION LAYOUT

(SHEET 5 OF 6)

INF-3507-ATS-SC-00D-XXX-L86-01-2019-W00
 CT2

V-605
TSE TSE

CU - 04

CU - 03

N
DOG DOG
HOUSE HOUSE

MATCHLINE SEE SHEET DWG-INF-3507-ATS-SC-00D-XXX-L86-01-2015-W00

04 05

05

DOG
HOUSE
DOG
HOUSE
01 02 03

Way 408
CU - 02

CU - 01
PW PW

06

CT1-H

V-606
IRRIGATION_SCHEDULE

CT1
M

CT2-H

V-607
CT3-H
CT3-H V-593
CT3-H V-594
V-595

V-608
CT1-H VALVE TYPE & NO.

DV A CONTROLLER NAME

50 10
FLOW RATE (GPM)

SIZE OF VALVE (MM)

IFC DRAWING REFERENCE NO:

* AUTOMATIC IRRIGATION LAYOUT
S/S 19-1783-INS-DWG-LAN-27001 TO 27006
* TYPICALE IRRIGATION DETAILS.
CT3 R15/2
19-1783-INS-DWG-LAN-70901
SHOP DRAWING REFERENCE NO:
CT3-H V-609
CT3-H
* TREE PLANTING PLAN

V-611 V-610 C O N C E PT
INF-3507-ATS-SC-00D-XXX-L83-01-2001-W00 TO 2006
* SHRUBS&GROUND COVER PLAN

A AW A I T I N G
INF-3507-ATS-SC-00D-XXX-L83-01-2007-W00 TO 2012

ARE
* IRRIGATION TYPICAL DETAILS
INF-3507-ATS-SC-00D-XXX-L86-01-2021-W00

N L A Y O U T
* TREATED SEWAGE EFFLUENT LAYOUT (TSE)
INF-3507-ATS-SC-00D-PH1-I05-01-3030-W02

DESIG
INF-3507-ATS-SC-00D-PH1-I05-01-3030-W02

SHOP DRAWING

S A S B U ILT
A R E A S H O W
R M AT I O N
INFO

PROJECT MANAGEMENT
QUANTITY SURVEYING
MAJAN ENGINEERING CONSULTANTS

P.O. Box 49100, Dubai, UAE. 31st Floor Rolex Tower Sheik Zayed Road.
Tel: (971) 43888440, Fax: (971) 43888440
web: http://www.keoic.com email: [email protected]

AL TASNIM ENTERPRISES L.L.C

BUILDING FINISHES DIVISION (LS & IRR)
Central Enquiry : 2421 4000/ 2459 0140,iHelpdesk:2421 4123
Address: P.O. Box - 103,P.C.-113,Muscat,Sultanate of Oman
Quality You Can Build On
Web: www.altasnim.com

SECTOR D, AREA 6,9

LUXURY BOULEVARD

AUTOMATIC IRRIGATION LAYOUT

(SHEET 6 OF 6)

INF-3507-ATS-SC-00D-XXX-L86-01-2020-W00