GL300W Manage Tool User Guide

GSM/GPRS/WCDMA/GNSS Tracker
TRACGL300WMT001
Version: 1.03
GL300W Manage Tool User Guide

Document Title GL300W Manage Tool User Guide

Version 1.03

Date 2017-01-16

Status Release

Document Control ID TRACGL300WMT001

k
General Notes

n
Queclink offers this information as a service to its customers, to support application and

i
engineering efforts that use the products designed by Queclink. The information provided is

l l
based upon requirements specifically provided to Queclink by the customers. Queclink has not

c
undertaken any independent search for additional relevant information, including any

ia
information that may be in the customer’s possession. Furthermore, system validation of this

e t
product designed by Queclink within a larger electronic system remains the responsibility of the

u
customer or the customer’s system integrator. All specifications supplied herein are subject to

n
change.

Q fide
Copyright
This document contains proprietary technical information which is the property of Queclink
Wireless Solutions Co., Ltd. The copying of this document and giving it to others and the using or
communication of the contents thereof, are forbidden without express authority. Offenders are

n
liable to the payment of damages. All rights are reserved in the event of grant of a patent or the
registration of a utility model or design. All specifications supplied herein are subject to change

o
without notice at any time.

C
TRACGL300WMT001 -1-
GL300W Manage Tool User Guide

Contents

Contents ............................................................................................................................................ 2
0. Revision History ............................................................................................................................. 3
1. GL300W Manage Tool Interface .................................................................................................... 4
1.1. System Requirements .......................................................................................................... 4
1.2. COM Setting ........................................................................................................................ 5
1.3. Quick Setting Wizard ........................................................................................................... 5
1.4. Professional Setting Windows ............................................................................................. 6
1.4.1. Title Bar ..................................................................................................................... 6

k
1.4.2. Menus ........................................................................................................................ 6
1.4.2.1. Start Menu ............................................................................................................................ 6

i n
1.4.2.2. Tool Menu.............................................................................................................................. 6

l l
1.4.2.3. Help Menu ............................................................................................................................. 8

c
1.4.3. Toolbar ....................................................................................................................... 9

a
1.4.4. Status Bar................................................................................................................. 10

e t i
1.4.5. Command Browser and Command Operation Space .............................................. 10
1.4.5.1. Command Brower ............................................................................................................... 10

u n
1.4.5.2. Command Operation Space ................................................................................................. 11
1.5. Operation Result Interface ................................................................................................ 12

Q fide
1.5.1. Operation Successful Interface ................................................................................ 12
1.5.2. Operation Failed Interface ....................................................................................... 12
2. Operation Instructions ................................................................................................................ 14
2.1. Device Configuration with Quick Setting Wizard .............................................................. 14
2.1.1. Welcome to Quick Setting Wizard ........................................................................... 14

n
2.1.2. UMTS Network Setting ............................................................................................ 14

o
2.1.3. Main Server Setting ................................................................................................. 15
2.1.4. Fixed Time Report Setting ....................................................................................... 16

C
2.1.5. Send Command to Device ....................................................................................... 17
2.2. Device Configuration in Professional Setting Mode .......................................................... 18
2.3. Read/Save All Configurations ............................................................................................ 19
2.4. Load/Send All Configurations ............................................................................................ 20

TRACGL300WMT001 -2-
GL300W Manage Tool User Guide

0.Revision History

Revision Date Author Description of Change

1.00 2015-10-17 Sivan Cai Initial.
1.01 2015-12-23 Sivan Cai Added GTUPC/GTPDS/GTCMD/GTUDF/GTWLT.
1.02 2016-06-08 Janet He Modified copyright information format.
1.03 2017-01-16 Abel Xiang Added the note in Chapter 2.3 Read/Save All
Configurations

i n k
cl ia l
u e n t
Q fide
o n
C
TRACGL300WMT001 -3-
GL300W Manage Tool User Guide

1.GL300W Manage Tool Interface

GL300W Manage Tool is PC software which can be used to configure the GL300W device through
Data_Cable_M or USB Cable. It is easy for the backend server developers to configure GL300W
with the Manage Tool, which has friendly user interface. The correct command messages sent to
GL300W will be displayed on the Manage Tool. (These messages can also be sent by SMS or
UMTS).

The administrators can also use the Manage Tool to configure GL300W before sale. But it is
strongly recommended to establish a backend server and control GL300W by SMS or UMTS.
Please refer to “GL300W @Tracker Air Interface Protocol” for details.

n k
Before using the Manage Tool, please find “Queclink_WCDMA_USBDriver_V1.00” in developer

i
suite and install the driver. After that, a new COM port can be found in the PC system. Then

l l
please follow the steps as below:

c
1. Power on GL300W.

ia
2. Connect GL300W to PC with USB Cable or DATA_CABLE_M.

e t
3. Run “Queclink GL300W_Manage_Tool_Vx.xx.exe”.

u n
1.1.System Requirements

Q fide
In order for this Manage Tool to run on your computer, you must use it in operating system
below:
♦ Windows 98SE;
♦ Windows ME Windows 2000 SP4;
♦ Windows XP SP2 and above (32 & 64 bit);

n
♦ Windows Server 2003 (32 & 64 bit);

o
♦ Windows Server 2008 (32 & 64 bit);
♦ Windows Vista (32 & 64 bit);

C
♦ Windows 7 (32 & 64 bit);
♦ Windows 8 (32 & 64 bit);

Supported System Environments:

♦ Microsoft .NET Framework 2.0 or higher

TRACGL300WMT001 -4-
GL300W Manage Tool User Guide

1.2.COM Setting

n k
Select the COM port, input the password “gl300w”, and the main window will be displayed.

l i l
1.3.Quick Setting Wizard

c a
The Quick Setting Wizard provides basic settings for the device. If you want to use more

e t i
functions of GL300W, please change to enter professional setting mode.

u n
Before you enter Quick Setting Wizard, you must make sure the COM connection is OK.

Q fide
Please refer to Chapter 2.1 for the details of setting with Quick Setting Wizard.

o n
C
TRACGL300WMT001 -5-
 GL300W Manage Tool User Guide

Title Bar 1.4.Professional Setting Windows

Menus

Toolbar

Command
Browser

Command

k
Operation
Space

cl i n l
ia
Status Bar

u e n t
1.4.1.Title Bar

Title Bar indicates current command title and the name of the Manage Tool.

Q fide
1.4.2. Menus

It includes “Start”, “Tool”, and “Help” menu in menus.

o n
1.4.2.1.Start Menu

C
Start menu includes “COM Settings”.

[COM Setting]: It is used to set the COM information and password. For details, please refer to
Chapter 1.2.

1.4.2.2.Tool Menu

Tool menu includes “Quick Setting Wizard”, “Operation Log”, and “Options” setting.

[Quick Setting Wizard]: It is used to open Quick Setting Wizard directly. Please refer to Chapter
2.1 for details.

[Operation Log]: It is used to display/hide the operation log.

TRACGL300WMT001 -6-
 GL300W Manage Tool User Guide

Operation

i n k
l l
Log

c ia
[Options]: It is used to configure the basic settings of Manage Tool.

u e t
“Basic Options” includes startup setting options and log save option.

Q fide n
o n
C
“Advanced Options” includes COM settings and other settings.
COM Settings is used to enable/disable slowclock control. It is recommended to use default
settings.

TRACGL300WMT001 -7-
GL300W Manage Tool User Guide

i n k
cl ia l
e
1.4.2.3.Help Menu

t
Help menu includes “About” and “Diagnosis”.

u
Q fide n
[About]: Select “About”. Then the following pop-up window will be displayed.

o n
C
“Tool Version” indicates the version of this Manage Tool.
“Support Version” indicates the firmware which this Manage Tool is used for.
“Device Version” indicates the firmware which connects to PC. It is recommended to use the
same version as Support Version. If Support Version and Device Version are different, the new
feature(s) of the device can not be used in this tool.

[Diagnosis]: Select “Diagnosis”. Then the following pop-up window will be displayed.

TRACGL300WMT001 -8-
GL300W Manage Tool User Guide

i n k
cl ia l
e t
This function is only for technical diagnosis when the device reports data abnormally, so please

u
ignore it when the device works normally.

Q fide n
1.4.3.Toolbar

It includes “COM Setting”, “Operation Log”, “Quick Setting Wizard”, “Real All Configuration”,
“Execute All Configuration”, “Save All Configuration”, and “Connect/Disconnect to COM”.

n
[COM Setting]: It is used to set the COM information and password. For Setting details, please

o
refer to Chapter 1.2.

C
[Operation Log]: It is used to display/hide operation log.

[Quick Setting Wizard]: It is used to open Quick Setting Wizard directly. Please refer to Chapter
2.1 for details.

[Read All Configuration]: It is used to display/hide operation log.

“Read From Device”: It is used to read all configurations from the device which connects to PC.
“Load Configuration From File”: It is used to load configuration file to the Manage Tool.

[Send All Configuration]: It is used to execute all configurations in Command Operation Space
except those of GTRTO.

TRACGL300WMT001 -9-
GL300W Manage Tool User Guide

[Save All Configuration]: It is used to save all configurations in Command Operation Space to file.

[Connect/Disconnect to COM]: It is used to Connect/Disconnect COM manually.

1.4.4.Status Bar

There are system status and current status in status bar.

[System Status]: It indicates the count of commands which are waiting and being executed.

n k
[Current Status]: It indicates current COM status, IMEI, protocol version and software version

i
read from the device.

cl a l
1.4.5.Command Browser and Command Operation Space

e t i
This area is mainly used to read and set parameters of the device.

u n
1.4.5.1.Command Brower

Q fide
Command Brower divides all @Track protocol commands into several parts. Click Function in
command Brower, parameters of this command will be shown in Command Operation Space.

Command Brower Function Description Related Command

Bearer Setting Information GTBSI

n
Backend Server Registration GTSRI
Server Connection

o
Information
Quick Start Settings GTQSS

C
Global Configuration GTCFG
Auto-Unlock PIN GTPIN
Protocol Watchdog GTDOG
Device Configuration Time Adjustment GTTMA
Non Movement Detection GTNMD
Function Key Setting GTFKS
Outside Working Hours GTOWH
Position Related Report Fixed Position Report GTFRI
Geo-Fence Configuration GTGEO
Alarm Setting Speed Alarm GTSPD
Temperature Alarm GTTEM
IO Application Digital Input Settings GTDIS
Real Time Operation GTRTO
Other Settings
Data Transfer Between UART and GTDTA

TRACGL300WMT001 - 10 -
 GL300W Manage Tool User Guide

Backend Server
Google Link SMS Configuration GTGLM
Over-the-air Configuration Update GTUPC
Settings for Preserving Device’s GTPDS
Specified Logic States
Command String Storage GTCMD
User Defined Function GTUDF
White Number List Configuration GTWLT

1.4.5.2.Command Operation Space

k
Command

i n
Description

cl ia l
e t
Parameters

u n
Area

Q fide
Command

o n
C
Display

[Command Description]: There is a short description for the command.

[Parameters Area]: Set/Read parameters of this command in this area.

[Command Display]: Command with parameters in parameters area is displayed in this area.

[Read]: Click this button to read the command from the device.

[Send]: Click this button to send the command to the device.

TRACGL300WMT001 - 11 -
GL300W Manage Tool User Guide

1.5.Operation Result Interface

1.5.1.Operation Successful Interface

Command read OK.

Command sent OK.

i n k
cl ia l
u e n t
Q fide
1.5.2.Operation Failed Interface

There should be something wrong with COM port connection if the failure reason is timeout.

o n
C
There should be COM port that is occupied when the following occurs. Please close all other
COM-related applications.

TRACGL300WMT001 - 12 -
GL300W Manage Tool User Guide

Please change to correct device password if Password Error occurs.

i n k
cl ia l
u e t
There are some issues with this COM. Please check your COM wire or port.

Q fide n
o n
C
TRACGL300WMT001 - 13 -
GL300W Manage Tool User Guide

2.Operation Instructions

2.1.Device Configuration with Quick Setting Wizard

The Manage Tool is developed based on the @Track Air Interface Protocol. Please refer to
“GL300W @Track Air Interface Protocol” for details.

The Quick Setting Wizard provides basic settings for the device. If you want to use more
functions of GL300W, please change to professional setting mode.

2.1.1.Welcome to Quick Setting Wizard

k
Click “Quick Setting Wizard” in toolbar, and open Quick Setting Wizard. If the “Result” in this

n
window is OK, click “Next”. If the “Result” is not OK, please check the COM port connection till

l i
the result is OK.

e c ia l
u n t
Q fide
o n
C Welcome to Quick Setting Wizard

2.1.2.UMTS Network Setting

Step_1: Set APN, APN user name and password in this window. For the meanings of these
parameters, please refer to “GL300W @Track Air Interface Protocol”.

Step_2: Then click “Next”.

TRACGL300WMT001 - 14 -
 GL300W Manage Tool User Guide

Step_1

i n k
cl ia l
u e t
Step_2

Q fide n
2.1.3.Main Server Setting

Step_1: Set report mode, main server, main server port, and SMS gateway in this window. For
the detailed description of these parameters, please refer to the “GL300W @Track Air Interface

n
Protocol”.

o
Step_2: Click “Check if main backend server is available” to check if main server IP and port are
valid in network. If the result is ERROR, please check the server connection. You can not get

C
report from server if there is server connection problem.

Step_3: Click “Next”.

TRACGL300WMT001 - 15 -
 GL300W Manage Tool User Guide

Step_1

i n k
Step_2

cl ia l
u e n t
Q fide
Step_3

2.1.4.Fixed Time Report Setting

n
Step_1: Set check interval, send interval, and discard no fix in this window. For the meanings of
these parameters, please refer to “GL300W @Track Air Interface Protocol”.

o
Step_2: Click “Next”.

C
TRACGL300WMT001 - 16 -
 GL300W Manage Tool User Guide

Step_1

i n k
cl a l
Step_2

u e n t i
2.1.5.Send Command to Device

Step_1: Click “Send Command”. Command GTBSI, GTSRI, and GTFRI will be sent to the device.

Q fide
Step_2: If the settings are downloaded successfully, the result “OK” will be returned. Click “OK”.
Step_3: Exit the Quick Setting Wizard.

o n
C
Step_1

TRACGL300WMT001 - 17 -
 GL300W Manage Tool User Guide

Step_3

k
Step_2

cl i n l
u e t ia
Q fide n
2.2.Device Configuration in Professional Setting Mode
The Manage Tool is developed based on the @Track Air Interface Protocol. Please refer to
“GL300W @Track Air Interface Protocol” for details.

n
The following shows a general procedure to configure GL300W with the Manage Tool.

Step_1
Co Step_4

Step_2

Step_3

Step_5

TRACGL300WMT001 - 18 -
GL300W Manage Tool User Guide

Step_1: Select Command

Select command in Command Brower Windows based on the function described. After that, the
parameters of the function are shown in Command Operation Space.

Step_2: Command Created Automatically

The command message which shall be sent to GL300W will be generated based on input and
displayed here. Please note the command message can also be sent to GL300W through SMS or
UMTS.

Step_3: Read Command from Device

k
It is recommended to read the parameters from GL300W and edit settings based on them.

n
Step_4: Set Parameter

i
Set parameters in Command Operation Space. Please refer to “GL300W @Track Air Interface

l l
Protocol” for the meaning of each parameter.

c ia
Step_5: Send Command to Device

e t
Click the “Send” button; download the parameters of this command to GL300W.

u n
Note: The parameters of GTSRI and GTBSI will be changed when the parameters of GTQSS

Q fide
change.

2.3.Read/Save All Configurations

Step_1: It is recommended to read all configurations from the device before saving the

n
configuration. Select “Read All Configuration””Read From Device”.

Co
Step_2: After reading successfully, click “Save All Configuration” in toolbar.

Step_3: Select a folder, type in the name of configuration file, and then click “Save” button.

TRACGL300WMT001 - 19 -
GL300W Manage Tool User Guide

i n k
cl ia l
u e n t
Q fide
Step_4: Saved successfully.

o n
C
Note: The Manage Tool will also generate an .ini file with AT commands which MT has saved
except AT+GTRTO. The name of the .ini file is composed of configuration name and “_at”.
For example: Click “Save All Configuration”, fill the name of configuration file with “gl300w”, and
then it will generate “gl300w.gl300w” and “gl300w_at.ini”. It is recommended to save all
configurations before sending AT+GTCFG command or sending all commands. This is because
command GTCFG can change password which makes situation complicated.

2.4.Load/Send All Configurations

Step_1: Before executing all configurations, please load the configuration file or set all
parameters in commands. To load the configuration file, please select “Read All Configuration”
” Load Configurations From File”. Then select the configuration file you need.

TRACGL300WMT001 - 20 -
GL300W Manage Tool User Guide

i n k
cl ia l
u e n t
Q fide
o n
C
Step_2: You can set the parameters in commands based on the configuration file, and then click
“Send All Configuration” in toolbar.

Step_3: The Manage Tool will write all commands to the device.

Queclink
Grace Wang Checked
2018.03.26

TRACGL300WMT001 - 21 -