Scribd
Upload
231 views2 pages

SIAX100

This document describes a touch screen numeric control called SIAX 100 that can control up to 4 axes of motors from 0.33 to 68 Nm. It has options for digital and analog I/O expansion via a proprietary bus or CAN-Open interface. The control has a 5.7-inch LCD touch screen, IP65 protection, and software for linear and circular interpolation, special instructions, electronic cams, and packaging functions.

Uploaded by

Kamal Mohamad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
231 views2 pages

SIAX100

This document describes a touch screen numeric control called SIAX 100 that can control up to 4 axes of motors from 0.33 to 68 Nm. It has options for digital and analog I/O expansion via a proprietary bus or CAN-Open interface. The control has a 5.7-inch LCD touch screen, IP65 protection, and software for linear and circular interpolation, special instructions, electronic cams, and packaging functions.

Uploaded by

Kamal Mohamad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Touch Screen

Numeric Control

SIAX 100
Can-Open I/O on proprietary Bus

or

Can-Open 32 Input 24Vdc


Motors
from 0.33 to 68 Nm 32 Output 24Vdc/2A

Up to 4 Axes

MAX 256 IN + 256 OUT - INPUT 24Vdc - OUTPUT 24Vdc/2A


RELAY OUTPUT - 8 ANALOG INPUT - 4 ANALOG OUTPUT

Hardware Optional
Display: LCD TFT ¼ VGA - 5,7” Ingressi / Uscite digitali:
65000 colori - Touch screen. Modulo da 32 ingressi 24 Vdc e 32 uscite 24 Vdc / 2A.
Linea seriale: 2 linee RS232 CAN-OPEN per espansione assi e I/O.
(oppure 1 RS232 + 1 RS422). N. 4 Encoder incrementali: 5/12V Push Pull/Line Driver.
Protezione: IP65. N. 4 Uscite analogiche: 12 bit ±10 V.
Alimentazione: 15 Vac oppure 24 Vdc. N. 4 Ingressi interrupt 24 Vdc.
Dimensioni: L 200 mm - H 160 mm - P 46 mm.
• Digital input / output:
• Display: TFT ¼ VGA LCD - 5,7” Module of 32 input 24 Vdc and 32 output 24Vdc / 2A.
65000 colors - Touch screen. • CAN-OPEN for axes and I/O expansion.
• 2 Serial lines RS232 • N. 4 Incremental encoder: 5/12 V
(or 1 RS232 + 1 RS422). Push Pull/Line Driver.
• Protection: IP65. • N. 4 Analog output: 12 bit ±10V.
• Power supply: 15 Vac or 24 Vdc . • N. 4 Interrupt input 24Vdc.
• Dimensions: W 200 mm - H 160 mm - D 46 mm.

Software
Interpolazione lineare e circolare.
Set di 250 istruzioni speciali
oltre al posizionamento.
Inseguimento tra assi.
Gestione camme.
Funzioni packaging.
Display grafico programmabile.
Test completi verso il mondo esterno.
Connessione modem - Teleassistenza.
Interfaccia con PC.

• Linear and circular interpolation.


• A set of 250 special instructions
in addition to positioning.
• Pursuit among axes.
• Electronic cams.
• Packaging functions.
• Graphic programmable display.
• Complete test for the outside world.
• Modem connection - Remote maintenance.
• Interface with PC.

Sipro S.r.l. Sistemi Programmabili


Viale dell’Industria, 7 - 37135 Verona (Italy)
tel. +39 (0)45 50 88 22 r.a - fax +39 (0)45 58 54 77 Solutions in motion.
[email protected] - www.sipro.vr.it

You might also like