Microprocessors and Microcontroller System-Prelim Lab Quiz 2-20-20
Microprocessors and Microcontroller System-Prelim Lab Quiz 2-20-20
Flag question
Question text
microprocesso
Decoder circuitry is within the Answer
Question 2
Correct
Mark 1.00 out of 1.00
Flag question
Question text
The binary codes of all instructions are all the same length
Select one:
True
False
Question 3
Correct
Mark 1.00 out of 1.00
Flag question
Question text
It keeps the track of the instruction in a program while they are being executed
Program Counter
Answer:
Question 4
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Accumulator
Answer is an 8-bit register associated with the ALU.
Question 5
Correct
Mark 1.00 out of 1.00
Flag question
Question text
SOD is a data line for serial output.
Select one:
True
False
Question 6
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Instruction Regis
The Answer holds the opcode (operation code or instruction code) of the
instruction which is being decoded and executed.
Question 7
Correct
Mark 1.00 out of 1.00
Flag question
Question text
It is used to hold the address of memory of the next instruction to be executed.
Program Counter
Answer:
Question 8
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Registers
Answer are used for temporary storage and manipulation of data and instructions
by the microprocessor
Question 9
Correct
Mark 1.00 out of 1.00
Flag question
Question text
The time required to fetch an instruction and necessary data from memory and to execute it, is
called an instruction cycle.
Select one:
True
False
Question 10
Correct
Mark 1.00 out of 1.00
Flag question
Question text
WR is a signal to control READ operation.
Select one:
True
False
Question 11
Correct
Mark 1.00 out of 1.00
Flag question
Question text
The first byte of the instruction is its opcode and the second and third bytes are either 16-bit
data or 16-bit address.
Select one:
True
False
Question 12
Correct
Mark 1.00 out of 1.00
Flag question
Question text
HOLD
Answer indicates that another device is requesting for the use of the address and
data bus.
Question 13
Correct
Mark 1.00 out of 1.00
Flag question
Question text
RD is a signal to control READ operation.
Select one:
True
False
Question 14
Correct
Mark 1.00 out of 1.00
Flag question
Question text
SID is data line for serial output.
Select one:
True
False
Question 15
Correct
Mark 1.00 out of 1.00
Flag question
Question text
It is an 8-bit register associated with the ALU.
Temporary Register
Answer:
Question 16
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Flags
The Intel 8085 microprocessor contains five flip-flops to serve as a status Answer .
Question 17
Correct
Mark 1.00 out of 1.00
Flag question
Question text
general purpose registe
The 8085 microprocessor contains six 8-bit Answer .
Question 18
Correct
Mark 1.00 out of 1.00
Flag question
Question text
ALE stands for
Address Latch Enable
Answer:
Question 19
Correct
Mark 1.00 out of 1.00
Flag question
Question text
It is a 16-bit special function register used as memory pointer.
Stack Pointer
Answer:
Question 20
Correct
Mark 1.00 out of 1.00
Flag question
Question text
: In a two byte instruction the first byte of the instruction is its opcode and the third byte is
either data or address.
Select one:
True
False