Scribd Logo
Upload

Welcome to Scribd!

  • 44 views

    Lab 9-10

    Uploaded by

    Komol7390X
    The document describes a laboratory work on configuring and studying the principles of operation of RIP and OSPF routing protocols. It provides instructions on configuring the protocols on routers R1, R2, R3 and R4, and their interfaces. It also describes testing connectivity between PCs using the ping command and verifying routes using the show ip routing-table command.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Lab 9-10

    Uploaded by

    Komol7390X
    44 views18 pages
    The document describes a laboratory work on configuring and studying the principles of operation of RIP and OSPF routing protocols. It provides instructions on configuring the protocols on routers R1, R2, R3 and R4, and their interfaces. It also describes testing connectivity between PCs using the ping command and verifying routes using the show ip routing-table command.

    Original Title

    (3)lab 9-10

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a laboratory work on configuring and studying the principles of operation of RIP and OSPF routing protocols. It provides instructions on configuring the protocols on routers R1, R2, R3 and R4, and their interfaces. It also describes testing connectivity between PCs using the ping command and verifying routes using the show ip routing-table command.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    44 views18 pages

    Lab 9-10

    Uploaded by

    Komol7390X
    The document describes a laboratory work on configuring and studying the principles of operation of RIP and OSPF routing protocols. It provides instructions on configuring the protocols on routers R1, R2, R3 and R4, and their interfaces. It also describes testing connectivity between PCs using the ping command and verifying routes using the show ip routing-table command.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 18

    O’ZBEKISTON RESPUBLIKASI AXBOROT TEXNOLOGIYALARI

    VA KOMMUNIKATSIYALARINI RIVOJLANTIRISH VAZIRLIGI


    MUHAMMAD AL-XORAZMIY NOMIDAGI
    TOSHKENT AXBOROT TEXNOLOGIYALARI UNIVERSITETI

    TTBA fani bo’yicha

    Mavzu: RIP protokolini sozlash va uning ishlash prinsipini o’rganish.


    OSPF protokolini sozlash va uning ishlash prinsipini o’rganish.

    Guruh: BTN001-L2

    Bajardi: Muslimbekov Ibratbek

    Tekshirdi: Abdullayev Ulug’bek

    TOSHKENT 2022
    9- Laboratoriya ishi

    RIP protokolini sozlash va uning ishlash prinsipini o’rganish

    Ishdan maqsad: RIP protokolini sozlash va uning ishlash prinsipini o’rganish.

    10- Laboratoriya ishi

    OSPF protokolini sozlash va uning ishlash prinsipini o’rganish

    Ishdan maqsad: OSPF protokolini sozlash va uning ishlash prinsipini

    o’rganish.

    1- Topshiriq:
    - Qurilmalar interfeyslarini variantingizda ko’rsatilganidek sozlang;
    - RIP protokolini sozlang;

    - Tarmoq segmentlarini sozlang;

    - Marshrutlarni tekshirib ko’ring va tahlil qiling (Natijalarni hisobotga qo’shing).

    2- Topshiriq:
    - Qurilmalar interfeyslarini variantingizda ko’rsatilganidek sozlang;

    - OSPF protokolini sozlang;

    - Hududni (area) o’rnating va unga tarmoq segmentlarini kiriting;

    - Marshrutlarni tekshirib ko’ring va tahlil qiling (Natijalarni hisobotga qo’shing).


    Ishni bajarish tartibi

    18-laboratoriya
    Asosiy tizim sozlamalari va IP manzillarni sozlash. R1, R2, R3 va R4 uchun qurilma
    nomlari va interfeyslarga tarmoq IP manzillarini sozlaymiz.

    R1 marshrutizatorini sozlaymiz
    <Huawei>system-view
    [Huawei]sysname Komol R1
    [Komol R1]interface Ethernet 0/0/0
    [Komol R1-Ethernet0/0/0]ip address 192.168.1.1 255.255.255.0
    [Komol R1-Ethernet0/0/0]quit
    [Komol R1]interface Ethernet 0/0/1
    [Komol R1-Ethernet0/0/1]ip address 10.10.10.1 255.255.255.252
    [Komol R1-Ethernet0/0/1]quit
    [Komol R1]quit
    < Komol R1>display ip interface brief
    R2 marshrutizatorni sozlaymiz:
    <Huawei>system-view
    [Huawei]sysname Komol R2
    [Komol R2]interface Ethernet 0/0/0
    [Komol R2-Ethernet0/0/0]ip address 10.10.10.2 255.255.255.252
    [Komol R2-Ethernet0/0/0]quit
    [Komol R2]interface Ethernet 0/0/1
    [Komol R2-Ethernet0/0/1]ip address 192.168.2.1 255.255.255.0
    [Komol R2-Ethernet0/0/1]quit
    [Komol R2]interface GigabitEthernet 0/0/0
    [Komol R2-GigabitEthernet0/0/0]ip address 11.11.11.1
    255.255.255.252 [Komol R2-GigabitEthernet0/0/0]quit
    [Komol R2]quit
    < Komol R2>display ip interface brief

    R3 marshrutizatorni sozlaymiz:
    <Huawei>system-view
    [Huawei]sysname Komol R3
    [Komol R3]interface Ethernet 0/0/0
    [Komol R3-Ethernet0/0/0]ip address 11.11.11.2 255.255.255.252
    [Komol R3-Ethernet0/0/0]quit
    [Komol R3]interface Ethernet 0/0/1
    [Komol R3-Ethernet0/0/1]ip address 192.168.3.1 255.255.255.0
    [Komol R3-Ethernet0/0/1]quit
    [Komol R3]interface GigabitEthernet 0/0/0
    [Komol R3-GigabitEthernet0/0/0]ip address 12.12.12.1
    255.255.255.252 [Komol R3-GigabitEthernet0/0/0]quit
    [Komol R3]quit
    < Komol R3>display ip interface brief
    R4 marshrutizatorni sozlaymiz:
    <Huawei>system-view
    [Huawei]sysname Komol R4
    [Komol R4]interface Ethernet 0/0/0
    [Komol R4-Ethernet0/0/0]ip address 12.12.12.2 255.255.255.252
    [Komol R4-Ethernet0/0/0]quit
    [Komol R4]interface Ethernet 0/0/1
    [Komol R4-Ethernet0/0/1]ip address 192.168.4.1 255.255.255.0
    [Komol R4-Ethernet0/0/1]quit
    [Komol R4]quit
    < Komol R4>display ip interface brief

    R1, R2, R3, R4 marshrutizatorlarda RIPv2 protokolini va tarmoq segmentlarini


    sozlaymiz.

    < Komol R1>sys


    [Komol R1]rip 1
    [Komol R1-rip-1]network 10.0.0.0
    [Komol R1-rip-1]network 192.168.1.0
    [Komol R1-rip-1]version 2
    < Komol R2>sys
    [Komol R2]rip 1
    [Komol R2-rip-1]network 10.0.0.0
    [Komol R2-rip-1]network 11.0.0.0
    [Komol R2-rip-1]network 192.168.2.0
    [Komol R2-rip-1]version 2

    < Komol R3>sys


    [Komol R3]rip 1
    [Komol R3-rip-1]network 11.0.0.0
    [Komol R3-rip-1]network 12.0.0.0
    [Komol R3-rip-1]network 192.168.3.0
    [Komol R3-rip-1]version 2
    < Komol R4>sys
    [Komol R4]rip 1
    [Komol R4-rip-1]network 12.0.0.0
    [Komol R4-rip-1]network 192.168.4.0
    [Komol R4-rip-1]version 2

    Joriy sozlamalarni ko’rish uchun “display this” buyrug’idan foydalanamiz.

    [Komol R1-rip-1]display this


    [Komol R2-rip-1]display this

    [Komol R3-rip-1]display this

    [Komol R4-rip-1]display this

    R1, R2, R3 va R4 marshrutizatorlarning marshrutlash jadvallarini ko’rish uchun


    “display ip routing-table” buyrug’idan foydalanamiz.
    < Komol R1>display ip routing-table
    < Komol R2>display ip routing-table

    < Komol R3>display ip routing-table


    < Komol R4>display ip routing-table

    Aloqa o’rnatilganligini tekshirish uchun ping buyrug’idan foydalanamiz. PC1 dan PC2
    ping yuboramiz va aloqani tekshiramiz.
    Aloqa o’rnatilganligini tekshirish uchun ping buyrug’idan foydalanamiz. PC2 dan PC3
    ping yuboramiz va aloqani tekshiramiz.

    Aloqa o’rnatilganligini tekshirish uchun ping buyrug’idan foydalanamiz. PC3 dan PC4
    ping yuboramiz va aloqani tekshiramiz.
    Aloqa o’rnatilganligini tekshirish uchun ping buyrug’idan foydalanamiz. PC4 dan PC1
    ping yuboramiz va aloqani tekshiramiz.

    Endi har bir marshrutizatorda OSPF protokolini sozlaymiz.

    R1 marshrutizatorda OSPF ni sozlaymiz:


    < Komol R1>sys
    [Komol R1]ospf
    [Komol R1-ospf-1]a rea 0
    [Komol R1-ospf-1-area-0.0.0.0]net work 10.10.10.0 0.0.0.3
    [Komol R1-ospf-1-area-0.0.0.0]quit
    [Komol R1-ospf-1]area 2
    [Komol R1-ospf-1-area-0.0.0.2]network 192.168.1.0 0.0.0.255
    R2 marshrutizatorda OSPF ni sozlaymiz:
    < Komol R2>sys
    [Komol R2]ospf
    [Komol R2-ospf-1]area 0
    [Komol R2-ospf-1-area-0.0.0.0]network 10.10.10.0 0.0.0.3
    [Komol R2-ospf-1-area-0.0.0.0]network 11.11.11.0
    0.0.0.3
    [Komol R2-ospf-1-area-0.0.0.0]quit
    [Komol R2-ospf-1]area 1
    [Komol R2-ospf-1-area-0.0.0.1]network 192.168.2.0 0.0.0.255
    R3 marshrutizatorda OSPF ni sozlaymiz:
    < Komol R3>sys
    [Komol R3]ospf
    [Komol R3-ospf-1]area 0
    [Komol R3-ospf-1-area-0.0.0.0]network 11.11.11.0 0.0.0.3
    [Komol R3-ospf-1-area-0.0.0.0]network 12.12.12.0
    0.0.0.3
    [Komol R3-ospf-1-area-0.0.0.0]quit
    [Komol R3-ospf-1]area 3
    [Komol R3-ospf-1-area-0.0.0.3]network 192.168.3.0 0.0.0.255
    R4 marshrutizatorda OSPF ni sozlaymiz:
    < Komol R4>sys
    [Komol R4]ospf
    [Komol R4-ospf-1]area 0
    [Komol R4-ospf-1-area-0.0.0.0]network 12.12.12.0
    0.0.0.3
    [Komol R4-ospf-1-area-0.0.0.0]quit
    [Komol R4-ospf-1]area 4
    [Komol R4-ospf-1-area-0.0.0.4]network 192.168.4.0 0.0.0.255

    Joriy sozlamalarni ko’rish uchun “display this” buyrug’idan foydalanamiz.

    [Komol R1-ospf-1]display this


    [Komol R2-ospf-1]display this

    [Komol R3-ospf-1]display this

    [Komol R4-ospf-1]display this

    Aloqa o’rnatilganligini tekshirish uchun ping buyrug’idan foydalanamiz. PC1 dan PC2
    ping yuboramiz va aloqani tekshiramiz.
    Aloqa o’rnatilganligini tekshirish uchun ping buyrug’idan foydalanamiz. PC2 dan PC3
    ping yuboramiz va aloqani tekshiramiz.

    Aloqa o’rnatilganligini tekshirish uchun ping buyrug’idan foydalanamiz. PC3 dan PC4
    ping yuboramiz va aloqani tekshiramiz.
    Aloqa o’rnatilganligini tekshirish uchun ping buyrug’idan foydalanamiz. PC4 dan PC1
    ping yuboramiz va aloqani tekshiramiz.

    You might also like