AD-120ES Parts Manual

24 VAC Phase 5
1995-2001

American Dryer Corporation

88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
e-mail: [email protected]
www.amdry.com

120195
072997WL/tf ADC Part No. 450160
 Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble-free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY POUR VOTRE SÉCURITÉ

Do not store or use gasoline or Ne pas entreposer ni utiliser d’essence

other flammable vapors and ni d’autres vapeurs ou liquides
liquids in the vicinity of this or inflammables à proximité de cet
any other appliance. appareil ou de tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.

Important
For your convenience, log the following information:

DATE OF PURCHASE ____________________________ MODEL NO. AD-120ES

__________________________________________

RESELLER’S NAME _______________________________________________________________________________________

Serial Number(s) ________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory,
you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508)
678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that
your order is processed accurately and promptly.

qÜÉ= áääìëíê~íáçåë= çå= íÜÉ= ÑçääçïáåÖ= é~ÖÉë= ã~ó= åçí= ÇÉéáÅí= óçìê= é~êíáÅìä~ê= ÇêóÉê= Éñ~ÅíäóK= = qÜÉ= áääìëíê~íáçåë= ~êÉ= ~= ÅçãéçëáíÉ= çÑ
íÜÉ= î~êáçìë= ÇêóÉê= ãçÇÉäëK= = _É= ëìêÉ= íç= ÅÜÉÅâ= íÜÉ= ÇÉëÅêáéíáçåë= çÑ= íÜÉ= é~êíë= íÜçêçìÖÜäó= ÄÉÑçêÉ= çêÇÉêáåÖK

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.
 Table of Contents
Control Door Assembly .......................................................................................................................... 3
Control Door Assembly (Sprinkler Option) ............................................................................................. 4
Microprocessor Control Panel Assembly ................................................................................................. 5
Microprocessor Control Box Assembly ............................................................................................... 6, 7
Dual Timer Control Panel Assembly .................................................................................................... 8, 9
Dual Timer Control Box Assembly .................................................................................................. 10, 11
Front Panel/Main Door Assemblies
For Models Mfd. as of August 31, 2000 ..................................................................................... 12, 13
Front Panel/Main Door Assemblies
For Models Mfd. prior to August 31, 2000 ................................................................................. 14, 15
Main Door Switch Assembly
For Models Mfd. as of August 31, 2000 ........................................................................................... 16
Main Door Switch Assembly
For Models Mfd. prior to August 31, 2000 ....................................................................................... 17
Lint Drawer/Lint Drawer Switch Box Assemblies
For Models Mfd. as of August 30, 1999 ........................................................................................... 18
Lint Drawer/Lint Drawer Switch Box Assemblies
For Models Mfd. Between December 1, 1994 and August 30, 1999 ................................................. 19
Lint Door Assembly .............................................................................................................................. 20
Microprocessor Controller (Computer) Temperature Sensor Bracket Assembly ..................................... 21
Dual Timer Temperature Sensor Bracket Assembly .......................................................................... 22, 23
Basket (Tumbler)/Support Assemblies ............................................................................................. 24, 25
Basket (Tumbler) Bearing Mount Assembly ..................................................................................... 26, 27
Idler Bearing Mount Assembly ........................................................................................................ 28, 29
Basket (Tumbler) Drive Motor Mount Assembly ............................................................................. 30, 31
Blower Motor Mount Assembly
For Models Mfd. as of July 17, 2000 ................................................................................................ 32
Impellor/Fan Assembly
For Models Mfd. prior to November 6, 2000 ................................................................................... 33
Blower Motor Mount Assembly
For Gas Models Mfd. prior to November 6, 2000 ...................................................................... 34, 35
Blower Motor Mount Assembly
For Electric Models Mfd. prior to November 6, 2000 ................................................................. 36, 37
Blower Motor Mount Assembly
For Steam Models Mfd. prior to November 6, 2000 ................................................................... 38, 39
Direct Spark Ignition (DSI) Burner Assembly
For Gas Models Only ................................................................................................................. 40, 41
Direct Spark Ignition (DSI) Module Assembly
For Gas Models Mfd. as of April 1, 2000 ......................................................................................... 42
Direct Spark Ignition (DSI) Module Assembly
For Gas Models Mfd. prior to April 1, 2000 ..................................................................................... 43
Electric Oven Assembly
For Electric Models Only ............................................................................................................ 44, 45
Electric Oven Relay Box Assembly
208-240 VAC 3ø 50/60 Hz .............................................................................................................. 46
Electric Oven Relay Box Assembly
380-416/480 VAC 3ø 50/60 Hz ....................................................................................................... 47
Sail Switch Assembly ............................................................................................................................ 48
Steam Damper Assembly
For Steam Models Only ................................................................................................................... 49
Microprocessor Reversing Contactor Mounting Panel Assembly ............................................................ 50
Dual Timer Reversing Contactor Mounting Panel Assembly .................................................................... 51
Extended Back Guard Assembly ........................................................................................................... 52
Step Down Transformer Application Listing ........................................................................................... 53
Electric Oven Component Application Listing
For Electric Models Only .................................................................................................................. 54
Electric Oven Power Distribution
72 Kw 208-240 VAC 3ø 50/60 Hz .................................................................................................. 55
Electric Oven Power Distribution
72 Kw 380-416/480 VAC 3ø 50/60 Hz ........................................................................................... 56
Electric Oven Power Distribution
80 Kw 208-240 VAC 3ø 50/60 Hz .................................................................................................. 57
Electric Oven Power Distribution
80 Kw 380-416/480 VAC 3ø 50/60 Hz ........................................................................................... 58
Electric Oven Wiring
72/80 Kw 208-240 VAC 3ø 50/60 Hz ............................................................................................. 59
Electric Oven Wiring
72/80 Kw 380-416/480 VAC 3ø 50/60 Hz ...................................................................................... 60
Sprinkler Pneumatic Assembly .............................................................................................................. 61
Sprinkler Panel Assembly ................................................................................................................ 62, 63
Sprinkler Pipe Assembly ................................................................................................................. 64, 65
Relay Panel (Sprinkler Option) ........................................................................................................ 66, 67
Temperature Sensor Assembly For Sprinkler ......................................................................................... 68
Back Guard Assembly .......................................................................................................................... 69
Additional Parts Available ..................................................................................................................... 70
Control Door Assembly 3

Illus. No. Part No. Qty. Description

1 820004* 1 Control Door Assembly ONLY

(for gas models and electric models Only)
820003 1 Stainless Steel Control Door Assembly ONLY
(for gas models and electric models Only)
820006* 1 Short Control Door ONLY
(for steam models Only)
820009 1 Stainless Steel Control Door Assembly ONLY
(for steam models Only)
2 160005 2 Spring Turn Latch (2-piece)
3 112360 1 ADC Logo ONLY
870011 1 Logo Double Tape Kit
4 150309 9 #10-16 x 1/2” Hex Head TEK Crimptite Screw
5 102600 1 Control Door Support Rod Catch
6 102601 1 Control Door Retainer Clip
7 102505 1 Control Door Support Rod

* Specify color when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

4 Control Door Assembly (Sprinkler Option)

Illus No. Part No. Qty. Description

1 881314 1 Control Door Assembly ONLY

2 160005 2 Spring Turn Latch (2-piece)
3 112360 1 ADC Logo ONLY
870011 1 Double Tape Kit
4 150415 9 #10-16 x 1/2” Phillips Round Head Crimptite Screw
5 102600 1 Control Door Support Rod Catch
6 102601 1 Control Door Rod Retainer Clip
7 102505 1 Control Door Support Rod
8 123211 1 120 V Panel Light Bulb
9 122420 1 Engraved Label “Sprinkler Stop”
10 123200 1 Amber Lighted Push-Button Operator
11 132388 1 N.O. Contact Block with Direct Supply Base
12 132387 1 N.C. Contact Block

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Microprocessor Control Panel Assembly 5

Illus. No. Part No. Qty. Description

1 112535 1 OPL English Keyboard Label Assembly

112276 1 OPL Stick-On Label (English Only)...Not Illustrated
112275 1 3-Language OPL Stick-On Label
(Spanish, Italian, and Hebrew)...Not Illustrated
112277 1 3-Language OPL Stick-On Label
(English, Spanish, and Hebrew)...Not Illustrated
112278 1 5-Language OPL Stick-On Label
(Italian, Dutch, French, German, and Chinese)...Not Illustrated
2 880836 1 Microprocessor Controller (computer) Control Panel ONLY
801260 1 Microprocessor Controller (computer) Control Panel ONLY
with Battery Bracket
801215 1 Microprocessor Controller (computer) Control Panel Assembly Complete
(includes illus. nos. 1 through 5 and 7)
801214 1 Microprocessor Control Panel Assembly Complete with Battery Option
(includes illus. nos. 1 through 5 and 7)
3 137231 1 Phase 5 OPL Reversing Microprocessor Controller (computer) ONLY
824998 1 Phase 5 Battery Clip ONLY
4 153010 2 #6 Star Washer
5 150005 2 #6-32 x 3/4” Phillips Round Head Machine Screw
6 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw
7 136048 1 1/8-Amp (slo blo) Fuse ONLY

IMPORTANT: Check label on computer chip to verify correct part number for microprocessor (computer).

Telephone: (508) 678-9000 Fax: (508) 678-9447

6 Microprocessor Control Box Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Microprocessor Control Box Assembly 7

Illus. No. Part No. Qty. Description

1 150100 2 #8-32 x 1/2” Round Head Machine Screw

2 141403 1 24 VAC Transformer - 50/60 Hz (for gas and steam models Only)
3 151001 2 #8-23 Pal Nut
4 150002 2 #6-32 x 1” Round Head Machine Screw
5 120715 1 30-Position Terminal Block
6 151000 2 #6-32 Pal Nut
7 150102 2 or 3 #8 x 3/8” Phillips Round Head TEK Screw
8 136057 2 1/2-Amp (slo blo) Fuse ONLY
182453 2 or 3 6-Amp (fast acting) Fuse (for electric models Only)
9 136008 2 or 3 Fuse Block/Strip ONLY
10 150413 2 #10-16 x 1/2” Torx Crimptite Screw
11 131932 1 24 VAC Relay (for electric models Only)
12 150413 1 #10-16 x 1/2” Torx Crimptite Screw
13 121010 1 L-70 Ground Lug
14 122631 1 6-Pin Connector ONLY
15 122705 * Socket Terminal ONLY
16 122704 * Pin Terminal ONLY
17 122630 1 6-Pin Connector ONLY
18 122625 1 15-Pin Connector ONLY
137025 1 15-Position Strain Relief...Not Illustrated
19 122704 12 Pin Terminal ONLY
20 122705 12 Socket Terminal ONLY
21 122626 1 15-Pin Socket Connector ONLY
22 122706 11 Microprocessor Socket ONLY
23 122641 1 15-Pin Microprocessor Connector ONLY
--- 122800 1 Microprocessor (female) Pin Extraction Tool
--- 122801 1 Pin/Socket Extraction Tool

* As required (either 2 or 3).

Telephone: (508) 678-9000 Fax: (508) 678-9447

8 Dual Timer Control Panel Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Dual Timer Control Panel Assembly 9

Illus. No. Part No. Qty. Description

1 123005 1 Red Indicator Light - 24 VAC

2 122400 1 Rocker Heat Selector Switch
3 880838 1 Dual Timer Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 15 and 17 through 21)
880837 1 Dual Timer Control Panel ONLY
4 131917 1 Push To Start Relay - 24 VAC
5 150207 2 #10-24 x 1/2” Phillips Round Head Machine Screw
6 154001 2 #10-24 Speed Nut
7 152000 2 #6-32 Hex Nut
8 153010 2 #6 Star Washer
9 120730 1 30-Position Terminal Block
10 153565 2 #6-32 x 1” Clinch Stud
11 150110 4 #8-32 x 1/4” Phillips Round Head Machine Screw
12 153560 2 #6-32 x 1/2” Clinch Stud
13 131931 1 Dual Timer Relay - 24 VAC
14 151000 1 #10-16 x 1/2” Pal Nut
15 112050 1 Dual Timer Label ONLY
16 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw
17 124103 2 Arrow Timer Knob
18 124025 1 60-Minute Timer - 24 VAC
19 124030 1 15-Minute Timer - 24 VAC
20 122602 1 9-Pin Connector ONLY
21 122700 7 Pin Terminal ONLY
--- 122801 1 Pin/Socket Extraction Tool

Telephone: (508) 678-9000 Fax: (508) 678-9447

10 Dual Timer Control Box Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Dual Timer Control Box Assembly 11

Illus. No. Part No. Qty. Description

1 122603 1 9-Pin Socket Connector

2 122701 7 Socket Terminal ONLY
122801 1 Pin/Socket Extraction Tool
3 315010 1 9-Pin Connector Bracket
4 150300 2 #10 x 1/2” Hex Washer TEK Screw
5 150100 2 # 8-32 x 1/2” Phillips Round Head Machine Screw
6 141403 1 24 VAC Transformer - 50/60 Hz (for gas models and steam models Only)
7 151001 2 #8-23 Pal Nut
8 150002 2 #6-32 x 1” Phillips Round Head Machine Screw
9 120715 1 30-Position Terminal Block
10 151000 2 #6-32 Pal Nut
11 150102 2 or 3 #8 x 3/8” Phillips Round Head TEK Screw
12 136057 2 1/2-Amp (slo blo) Fuse ONLY
182453 1 6-Amp (fast acting) Fuse (for electric models Only)
13 136008 2 or 3 Fuse Block/Strip ONLY
14 150413 2 #10-16 x 1/2” Torx Crimptite Screw
15 131932 1 24 VAC Relay (for electric models Only)
16 150413 1 #10-16 x 1/2” Torx Crimptite Screw
17 121010 1 L-70 Ground Lug
18 122631 1 6-Pin Connector ONLY
19 122705 * Socket Terminal ONLY
20 122704 * Pin Terminal ONLY
21 122630 1 6-Pin Connector ONLY
137025 1 6/15-Position Strain Relief...Not Illustrated
22 122625 1 15-Pin Connector ONLY
23 122704 12 Pin Terminal ONLY
24 122705 12 Socket Terminal ONLY
25 122626 1 15-Pin Socket Connector ONLY
--- 122801 1 Pin/Socket Extraction Tool

* As required (either 2 or 3).

Telephone: (508) 678-9000 Fax: (508) 678-9447

12 Front Panel/Main Door Assemblies
For Models Mfd. as of August 31, 2000

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Front Panel/Main Door Assemblies 13
For Models Mfd. as of August 31, 2000

Illus. No. Part No. Qty. Description

1 883081 1 Door Hinge (black)

2 150683 4 1/4-20 x 5/8” Carriage Bolt
3 151012 1 #10-32 Acorn Nut (white)
4 883082 1 Main Door Handle (black)
5 102214 1 30” Door Glass
170730 1 Door Glass Adhesive (10.3 oz. cartridge)
6 152014 6 1/4-20 Free Spin Wash Nut
7 150120 1 Main Door Latch Screw (#10-32 dome hex head screw)
8 151010 1 #10-32 Acorn Nut
9 883083 1 Main Door Assembly Complete (black)
(includes illus. nos. 2 through 10)
883080 1 Main Door Ring (black)
10 882411 1 Extruded Steel Door Gasket
11* 825195 1 Front Panel Assembly (white)
12 170330 1 Friction Door Latch
13 154215 2 5/32” Pop Rivet
14 102360 2 0.0625 x 0.125 Gasket (black)
15 154270 2 1” Spacer
16 150685 1 1/4-20 x 1-3/4” Carriage Bolt

* Specify color when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

14 Front Panel/Main Door Assemblies
For Models Mfd. prior to August 31, 2000

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Front Panel/Main Door Assemblies 15
For Models Mfd. prior to August 31, 2000

Illus. No. Part No. Qty. Description

1 820012* 1 Right Hand Front Panel Assembly

(includes illus. nos. 1, 4, and 5)
820014 1 Stainless Steel Right Hand Front Panel Assembly
(includes illus. nos. 1, 4, and 5)
2 150309 15 #10-16 x 1/2” Hex Head TEK Crimptite Screw
3 150412 12 #10-16 x 3/4” Phillips Round Head Crimptite Screw
4 170340 3 3-1/2” Stainless Steel Striker Pad
5 154200 6 5/32” Pop Rivet
6 102308 1 Door Gasket ONLY (94” length)
7 102210 1 20-7/16” Door Glass ONLY
170730 1 Glass Adhesive (10.3 oz. cartridge)
8 150401 3 #10-24 x 1-1/4” Phillips Taptite Screw
9 306801 9 Magnet Keeper ONLY
10 102102 6 1” x 3/4” x 0.197” Main Door Magnet ONLY
11 150430 9 #10-16 x 1/2” Phillips Pan Head Self Tapping Screw
12 180150 1 35” Granite Main Door Handle ONLY
13 800127* 1 Main Door Assembly Complete with Gray Cross Handle
(includes illus. nos. 6 through 13)
800128 1 Stainless Steel Main Door Assembly Complete with Gray Cross Handle
(includes illus. nos. 6 through 13)
800122* 1 Main Door Assembly with Glass and Gasket ONLY
(includes illus. nos. 6, 7, and 13)
800123 1 Stainless Steel Main Door Assembly with Glass and Gasket ONLY
(includes illus. nos. 6, 7, and 13)
14 150430 10 #10 x 1/2” Phillips Pan Head Machine Screw
15 180155 1 35” Cross Main Door Hinge Block ONLY (gray)

* Specify color when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

16 Main Door Switch Assembly
For Models Mfd. as of August 31, 2000

Illus. No. Part No. Qty. Description

1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw

2 152013 2 #6-32 Hex Nut
3 153010 2 #6 Star Washer
4 137005 1 Single-Pole Door Switch (SDS)
5 150445 4 1/4-20 x 3/4” Socket Head Cap Screw
6 881687 1 Main Door Switch Housing ONLY (white)
881695 1 Main Door Switch Housing ONLY (blue)
881702 1 Main Door Switch with Housing Assembly (white)
(includes illus. nos. 1 through 4 and 6)
881700 1 Main Door Switch with Housing Assembly (blue)
(includes illus. nos. 1 through 4 and 6)
7 150443 2 1/4-20 x 3/4” Stainless Steel Cap Screw
8 881441 1 Bottom Hinge Block (white)
881735 1 Bottom Hinge Block (blue)
9 881440 1 Top Hinge Block (white)
881736 1 Top Hinge Block (blue)
10 153031 1 Nylon Washer

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Main Door Switch Assembly 17
For Models Mfd. prior to August 31, 2000

Illus. No. Part No. Qty. Description

1 821098 1 Main Door Switch Assembly Complete

(includes illus. nos. 1 through 4 and 6)
821097 1 Main Door Switch Bracket Assembly ONLY
102405 1 Main Door Switch Actuator ONLY
2 150415 2 #10-16 x 1/2” Phillips Round Head Crimptite Screw
3 102405 1 Main Door Switch Actuator
4 137005 1 Main Door Switch ONLY
5 121028 2 1/4” x 0.032 Insulated Terminal ONLY
6 180155 1 35” Cross Door Hinge Block ONLY (gray)
7 122705 2 Socket Mate to Split Pin
8 122626 1 15-Pin Cap Housing ONLY (M/L)

Telephone: (508) 678-9000 Fax: (508) 678-9447

18 Lint Drawer/Lint Drawer Switch Box Assemblies
For Models Mfd. as of August 30, 1999

Illus. No. Part No. Qty. Description

1 802106 1 Lint Basket Assembly

802125 1 Stainless Steel Lint Basket Assembly
2 122116 1 Lint Drawer Switch ONLY
3 122605 1 4-Pin Socket Connector
4 122701 2 Socket Terminal ONLY
122801 1 Pin/Socket Extraction Tool
5 882507 1 Lint Drawer Switch Box Assembly Complete
(includes illus. nos. 3 through 6)
For Models Mfd. as of August 30, 1999
6 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw
7 122700 2 Pin Terminal ONLY
8 122604 1 4-Pin Connector
9 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
10 319076 1 Right Hand Divider Panel
11 319077 1 Left Hand Divider Panel
12 150301 14 #8-18 x 7/16” Phillips Pan Head TEK Screw

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Lint Drawer/Lint Drawer Switch Box Assemblies 19
For Models Mfd. Between December 1, 1994 and August 30, 1999

Illus. No. Part No. Qty. Description

1 881141* 1 Lint Drawer Assembly with Safety Switch Actuator Complete

881173 1 Stainless Steel Lint Drawer Assembly with Safety Switch Actuator
2 820017 1 Lint Screen Assembly ONLY
3 153562 2 #6-32 x 3/4” Clinch Stud
4 136992 1 Lint Drawer Switch ONLY
5 153010 2 #6 Star Washer
6 152000 2 #6-32 Hex Nut
7 122605 2 4-Pin Socket Connector ONLY
8 122701 4 Socket Terminal ONLY
122801 1 Pin/Extraction Tool
9 821119 1 Lint Drawer Switch Assembly Complete
(includes illus. nos. 3 and 9)
For Models Mfd. prior to August 30, 1999
821116 1 Lint Drawer Switch Mounting Bracket Assembly ONLY
(includes illus. nos. 3 and 9)
10 150415 2 #10-16 x 1/2” Phillips Round Head Crimptite Screw

* Specify color when ordering.

Telephone: (508) 678-9000 Fax: (508) 678-9447

20 Lint Door Assembly

Illus. No. Part No. Qty. Description

1 824256* 1 Lint Door Assembly

(includes illus. nos. 1, 2, and 4)
For Models Mfd. as of August 30, 1999
820015* 1 Lint Drawer Assembly
(includes illus. nos. 1, 2, and 4)
For Models Mfd. Between December 1, 1994 and August 30, 1999
820021 1 Stainless Steel Lint Door Assembly
2 117602 5 Gasket (sold by the foot)
3 150309 5 #10-16 x 1/2” Hex Head TEK Crimptite Screw
4 117604 8 Neoprene Sponge Tape (sold by the foot)

* Specify color when ordering.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Microprocessor Controller (Computer) Temperature Sensor Bracket Assembly 21

Illus. No. Part No. Qty. Description

1 820022 1 Microprocessor Controller (computer) Temperature Sensor Bracket

Assembly Complete
(includes illus. nos. 1 through 10)
331295 1 Temperature Sensor Bracket ONLY
2 154007 2 1/4” Tinnerman Push On Fastener
3 880251 1 1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 2, 3, 8, 9, and 10)
4 152000 2 #6-32 Hex Nut
5 153010 2 #6 Star Washer
6 130302 1 225° Large Automatic Reset Thermostat ONLY
7 150000 2 #6-32 x 1/4” Round Head Machine Screw
8 121028 2 Insulated Terminal
9 122605 1 4-Pin Socket Connector ONLY
10 122701 4 Socket Terminal ONLY
11 122604 1 4-Pin Connector ONLY
12 122700 4 Pin Terminal ONLY
122801 1 Pin/Socket Extraction Tool
13 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw

Telephone: (508) 678-9000 Fax: (508) 678-9447

22 Dual Timer Temperature Sensor Bracket Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Dual Timer Temperature Sensor Bracket Assembly 23

Illus. No. Part No. Qty. Description

1 801404 1 Dual Timer Sensor Bracket Assembly Complete

(includes illus. nos. 1 through 11 and 15)
331295 1 Sensor Bracket ONLY
2 152000 5 #6-32 Hex Nut
3 153010 5 #6 Star Washer
4 130302 1 225° Large Thermostat ONLY
5 130107 1 160° Large Thermostat ONLY
6 130109 1 140° Large Thermostat ONLY
7 130101 1 180° Large Thermostat ONLY
8 150001 5 #6-32 x 1/2” Phillips Round Head Machine Screw
9 121028 8 Insulated Terminal
10 122605 1 4-Pin Socket (female) Connector ONLY
840062 1 Sensor Bracket Harness Assembly
(includes illus. nos. 9, 10, and 11)
11 122701 4 Socket Terminal ONLY
12 122604 1 4-Pin Connector ONLY
13 122700 4 Pin Terminal ONLY
122801 1 Pin/Extraction Tool
14 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
15 840065 1 Sensor Jumper Harness ONLY

Telephone: (508) 678-9000 Fax: (508) 678-9447

24 Basket (Tumbler)/Support Assemblies

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Basket (Tumbler)/Support Assemblies 25

Illus. No. Part No. Qty. Description

1 820110* 1 Basket (tumbler) ONLY without Felt Collar

820111* 1 Stainless Steel Basket (tumbler) ONLY without Felt Collar
820020 1 Basket (tumbler) and Support Assembly Complete
(includes illus. nos. 1 through 12)
820052 1 Basket (tumbler) and Support Assembly Complete with Rotational Sensor
Option
(includes illus. nos. 1 through 12)
820030 1 Stainless Steel Basket (tumbler) and Support Assembly Complete
(includes illus. nos. 1 through 12)
820029 1 Stainless Steel Basket (tumbler) and Support Assembly Complete
with Rotational Sensor Option
(includes illus. nos. 1 through 12)
2 150413 40 #10-16 x 1/2” Torx Crimptite Screw
3 331105 4 Basket (tumbler) Rib ONLY
331106 4 Stainless Steel Basket (tumbler) Rib ONLY
4 150500 1 5/16-18 x 3/4” Socket Button Head Screw
5 100910 8 1/2-13 x 44” Tie Rod
6 301700 4 Basket (tumbler) Reinforcing Plate ONLY
7 301701 ** Basket (tumbler) Shim ONLY
8 820115 1 Basket (tumbler) Support ONLY
820116 1 Basket (tumbler) Support ONLY with Rotational Sensor Option
9 152011 8 1/2-13 Hex Nut
10 153026 8 1/2” Lock Washer
11 153011 8 9/16” Flat Washer
12 116006 1 Felt Collar ONLY
401010 1 #847 Adhesive For Felt Collar (5 oz. tube)
13 821002 1 Rotational Magnet Holder Assembly
(for microprocessor models with optional rotational sensor)

* Felt collar is not included and must be ordered separately.

** As required.

Telephone: (508) 678-9000 Fax: (508) 678-9447

26 Basket (Tumbler) Bearing Mount Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Basket (Tumbler) Bearing Mount Assembly 27

Illus. No. Part No. Qty. Description

1 101137 1 2-1/4” SFX Bushing

2* 100135 2 AP-74 V-Belt
3 101136 1 20” Basket (tumbler) Pulley
4 150602 4 5/8-11 x 3” Hex Head Machine Bolt
5 153016 4 5/8” Flat Washer
6 880204 1 2-1/4” Pillow Block Bearing ONLY
7 153016 4 5/8” Flat Washer
8 153015 4 5/8” Lock Washer
9 152010 4 5/8-11 Hex Nut
10 150600 2 3/8-16 x 1-1/2” Hex Head Machine Bolt
11 152005 2 3/8-16 Hex Nut
12 801102 1 Basket (tumbler) Bearing Mount Assembly
(includes illus. nos. 4 through 13)
13 880204 1 2-1/4” Pillow Block Bearing ONLY
14 150603 2 1/2-13 x 3” Square Head Machine Bolt
15 152011 2 1/2-13 Hex Nut
16 152005 2 3/8-16 Hex Nut
17 153005 2 3/8” Lock Washer
18 153004 4 3/8” Flat Washer
19 150600 2 3/8-16 x 1-1/2” Hex Head Machine Bolt
20 153004 2 3/8” Flat Washer
21 100801 2 5/8” Retaining Ring
22 301810 1 5/8” Hinge Pin
23 100811 2 2-1/4” Retaining Ring
24 153018 2 1/4” Flat Washer
25 153007 2 1/4” Lock Washer
26 150512 2 1/4-20 x 1/2” Hex Head Machine Bolt
27 824807 1 Rotational Sensor Assembly
28 880841 1 Rotational Sensor Mounting Bracket

* Replace in matched sets (both belts).

Telephone: (508) 678-9000 Fax: (508) 678-9447

28 Idler Bearing Mount Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Idler Bearing Mount Assembly 29

Illus. No. Part No. Qty. Description

1 101110 1 1” Bushing
2 101113 1 2A3.0 Pulley
3* 100135 1 AP-74 V-Belt
4 101107 1 1” SK Bushing
5* 100170 1 3V-710 V-Belt
6 101112 1 19” Idler Pulley
7 100715 1 1/4” x 1/4” x 4-5/8” Key
8 301852 1 1” Idler Shaft ONLY
9 880205 1 1” Pillow Block Bearing ONLY
10 153004 4 3/8” Flat Washer
11 150600 4 3/8-16 x 1-1/2” Hex Head Machine Bolt
12 150512 6 1/4-20 x 1/2” Hex Head Machine Bolt
13 150509 2 5/16-18 x 3” Hex Head Machine Bolt
14 153001 4 5/16” Flat Washer
15 152004 6 5/16” Hex Nut
16 153002 8 5/16” Lock Washer
17 801001 1 Idler Bearing Mount Assembly Complete
(includes illus. nos. 8 through 11 and 17 through 25)
311401 1 Idler Bearing Mount ONLY
18 880205 1 1” Pillow Block Bearing ONLY
19 153004 4 3/8” Flat Washer
20 153005 4 3/8” Lock Washer
21 152005 4 3/8-16 Hex Nut
22 103005 1 Idler Adjustment Hinge ONLY
23 153007 6 1/4” Lock Washer
24 152002 6 1/4-20 Hex Nut

* Replace in matched sets (both belts).

Telephone: (508) 678-9000 Fax: (508) 678-9447

30 Basket (Tumbler) Drive Motor Mount Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Basket (Tumbler) Drive Motor Mount Assembly 31

Illus. No. Part No. Qty. Description

1 101121 1 5/8” SK Bushing

2 101114 1 2.65” Pulley (for 60 Hz models Only)
101120 1 3.15” Pulley (for 50 Hz models Only)
3* 100170 1 3V-710 V-Belt
4 120200 1 3/8” x 90° Connector
5 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
6 153001 4 5/16” Flat Washer
7 100029 1 3/4 HP 208/230/460v 3ø 50/60 Hz and 380v 3ø 50 Hz Totally Enclosed,
Fan-Cooled (T.E.F.C.) Motor (56Z frame)
100084 1 3/4 HP 380v 3ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor
(56Z frame)
8 800952 1 Basket (tumbler) Motor Mount ONLY (56Z frame)
800953** 1 3/4 HP 208/230/460v 3ø 60 Hz Basket (tumbler) Motor Mount Assembly
Complete
(includes illus. nos. 1, 2, 4 through 11, 15, and 16)
800955** 1 3/4 HP 208/230/380/460v 3ø 50 Hz Motor Mount Assembly Complete
(includes illus. nos. 1, 2, 4 through 11, 15, and 16)
800956** 1 3/4 HP 380v 3ø 60 Hz Basket (tumbler) Motor Mount Assembly Complete
(includes illus. nos. 1, 2, 4 through 11, 15, and 16)
9 152004 4 5/16-18 Hex Nut
10 153002 4 5/16” Lock Washer
11 153001 4 5/16” Flat Washer
12 152004 4 5/16-18 Hex Nut
13 153002 4 5/16” Lock Washer
14 153001 4 5/16” Flat Washer
15 150619 1 3/8-16 x 3” Hex Head Machine Bolt
16 152005 2 3/8-16 Hex Nut

* Replace in matched sets (both belts).

** Specify voltage when ordering.

IMPORTANT: For voltages higher than 460 VAC, contact the ADC factory for correct part number of
motor mount assembly.

Telephone: (508) 678-9000 Fax: (508) 678-9447

32 Blower Motor Mount Assembly
For Models Mfd. as of July 17, 2000

Illus. No. Part No. Qty. Description

1 150501 4 5/16-18 x 1” Hex Head Bolt

2 153001 4 5/16” Flat Washer
3 181043 1 3 HP Motor 208/230/460/416v 50 Hz
100022 1 3 HP Motor 380v 3ø 60 Hz
100088 1 3 HP Motor 575v 3ø 60 Hz
4 152004 4 5/16-18 Hex Nut
5 153002 4 5/16” Lock Washer
6 153001 4 5/16” Flat Washer
7 117604 4’ Noise Suppressor Tape (sold by the foot)
8 153001 4 5/16” Flat Washer
9 153002 4 5/16” Lock Washer
10 152004 4 5/16-18 Hex Nut
11 803561 1 Blower Motor Mount
12 153055 1 5/8” Motor Washer
13 802027 1 16” Riveted High Flow Impellor 7/8” Bore (60 Hz dryers)
802024 1 16” Riveted Impellor 7/8” Bore (50 Hz dryers)
14 100705 1 3/16” x 3/16” x 1-3/8” Key
15 153055 1 5/8” Motor Washer
16 152006 2 1/2-20 Left Hand Jam Nut

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Impellor/Fan Assembly 33
For Models Mfd. prior to November 6, 2000

Illus. No. Part No. Qty. Description

1 101194 1 SDS x 1-3/8” Bushing (for 60 Hz models Only)

101152 1 SH x 1-3/8” Bushing (for 50 Hz models Only)
2 101147 1 2B x 4.8 Pulley (for 60 Hz models Only)
101148 1 2B x 4.0 Pulley (for 50 Hz models Only)
3 100706 1 5/16” x 5/16” x 1-3/8” Key
4 100811 2 Retaining Ring
5 317400 1 Impellor (fan/blower) Shaft
6 880879 2 1-3/8” Pillow Block Bearing with Setscrews and Grease Fitting
154326 4 5/16 x 3/8” Allen Setscrew ONLY
170512 2 1/4-28 N.P.T. Grease Fitting ONLY
7 153004 4 3/8” Flat Washer
8 153005 4 3/8” Lock Washer
9 150601 4 3/8-16 x 2” Hex Head Machine Bolt
10 813002 1 Impellor (fan/blower) Shaft Mount ONLY
813023 1 Impellor (fan/blower) Assembly Complete (for 60 Hz models Only)
(includes illus. nos. 1 through 9 and 13 through 17)
813024 1 Impellor (fan/blower) Assembly Complete (for 50 Hz models Only)
(includes illus. nos. 1 through 9 and 13 through 17)
11 152005 8 3/8-16 Hex Nut
12 153005 8 3/8” Lock Washer
13 153004 8 3/8” Flat Washer
14 117604 4 Neoprene Sponge Tape (sold by the foot)
15 100603 1 16” Impellor (fan/blower) with 3/4” Bore
16 100714 1 3/16” x 3/16” x 1 7/8” Key
17 153065 1 1/2” x 1-1/2” Flat Washer
(for models mfd. as of May 19, 1998)
153050 1 1/2” x 1-1/16” Flat Washer
(for models mfd. prior to May 19, 1998)
18 152006 2 1/2-20 Left Hand Jam Nut

Telephone: (508) 678-9000 Fax: (508) 678-9447

34 Blower Motor Mount Assembly
For Gas Models Mfd. prior to November 6, 2000

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Blower Motor Mount Assembly 35
For Gas Models Mfd. prior to November 6, 2000

Illus. No. Part No. Qty. Description

1 802253 1 Adjustable Plate Assembly

(for models mfd. as of July 20, 1998)
802229 1 Adjustable Plate Assembly
(for models mfd. prior to July 20, 1998)
813025 1 Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 208-230/460 Volt - 60 Hz and 380/460 Volt - 50 Hz Models ONLY
813049 1 Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 380 Volt/60 Hz Models ONLY
2 152034 2 3/8-16 x 3-1/2” Hex Head Bolt
3 152005 4 3/8-16 Hex Nut
4 802232 1 Adjustable Angle Assembly
5 153001 11 5/16” Flat Washer
6 153002 11 5/16” Lock Washer
7 150501 7 5/16-18 x 3/4” Hex Head Machine Bolt
8 152004 4 5/16-18 Hex Nut
9 882078 1 3 HP Blower Motor with Adjusting Plate
(for 208-230/460 volt - 60 Hz and 380/460 volt - 50 Hz models Only)
100043 1 3 HP Blower Motor
(for 208-230/460 volt - 60 Hz and 380-416 volt - 50 Hz models Only)
For Models Mfd. as of January 7, 1999
100081 1 3 HP Blower Motor
(for 380 volt/60 Hz models Only)
For Models Mfd. prior to January 7, 1999
10* 100169 1 5L-350 V-Belt
11 101135 1 2B x 5.4 Motor Pulley
12 101138 1 SDS x 1-1/8” Bore Bushing
13 100706 1 5/16” x 5/16” x 1-3/8” Key

* Replace in matched sets (both belts).

Telephone: (508) 678-9000 Fax: (508) 678-9447

36 Blower Motor Mount Assembly
For Electric Models Mfd. prior to November 6, 2000

Illus. No. Part No. Qty. Description

1 802253 1 Adjustable Plate Assembly

(for models mfd. as of July 20, 1998)
802229 1 Adjustable Plate Assembly
(for models mfd. prior to July 20, 1998)
813028 1 60 Kw Electric Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 208-230/460 Volt - 60 Hz and 380/460 Volt - 50 Hz Models ONLY
813052 1 60 Kw Electric Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 380 Volt/60 Hz ONLY

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Blower Motor Mount Assembly 37
For Electric Models Mfd. prior to November 6, 2000

Illus. No. Part No. Qty. Description

813025 1 72 Kw Electric Blower Motor Mount Assembly Complete

(includes illus. nos. 1 through 13)
For 208-230/460 Volt - 60 Hz and 380/460 Volt - 50 Hz Models ONLY
813049 1 72 Kw Electric Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 380 Volt/60 Hz Models ONLY
813070 1 80 Kw Electric Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 208-230/460 Volt - 60 Hz and 380-416 Volt - 50 Hz Models ONLY
(for models mfd. as of November 2, 1998)
813027 1 80 Kw Electric Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 208-230/460 Volt - 60 Hz and 380/460 Volt - 50 Hz Models ONLY
(for models mfd. prior to November 2, 1998)
813051 1 80 Kw Electric Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 380 Volt/60 Hz Models ONLY
2 152034 2 3/8-16 x 3-1/2” Hex Head Machine Bolt
3 152005 4 3/8-16 Hex Nut
4 802232 1 Adjustable Angle Assembly
5 153001 11 5/16” Flat Washer
6 153002 11 5/16” Lock Washer
7 150501 7 5/16-18 x 3/4” Hex Head Machine Bolt
8 152004 4 5/16-18 Hex Nut
9 882078 1 3 HP Blower Motor with Adjusting Plate
(for 208-230/460 volt - 60 Hz and 380/460 volt - 50 Hz models Only)
100043 1 3 HP Blower Motor
(for 208-230/460 volt - 60 Hz and 380-416 volt - 50 Hz models Only)
For Models Mfd. as of January 7, 1999
100081 1 3 HP Blower Motor (for 380 volt/60 Hz models Only)
For Models Mfd. prior to January 7, 1999
10* 100156 1 5L-330 V-Belt (for 60 Kw electric oven models Only)
100169 1 5L-350 V-Belt (for 72 Kw electric oven models Only)
100168 1 5L-360 V-Belt (for 80 Kw electric oven models Only)
11 101147 1 2B x 4.8 Motor Bushing (for 60 Kw electric oven models Only)
101135 1 2B x 5.4 Motor Bushing (for 72 Kw electric oven models Only)
101185 1 2B x 6.2 Motor Bushing (for 80 Kw electric oven models Only)
12 101138 1 SDS x 1-1/8” Bore Bushing
13 100706 1 5/16” x 5/16” x 1-3/8” Key

* Replace in matched sets (both belts).

Telephone: (508) 678-9000 Fax: (508) 678-9447

38 Blower Motor Mount Assembly
For Steam Models Mfd. prior to November 6, 2000

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Blower Motor Mount Assembly 39
For Steam Models Mfd. prior to November 6, 2000

Illus. No. Part No. Qty. Description

1 802253 1 Adjustable Plate Assembly

(for models mfd. as of July 20, 1998)
802229 1 Adjustable Plate Assembly
(for models mfd. prior to July 20, 1998)
813069 1 Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 380-416 Volt/50 Hz Models ONLY
(for models mfd. as of November 2, 1998)
813026 1 Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 208-230/460 Volt - 60 Hz and 380/460 Volt - 50 Hz Models ONLY
(for models mfd. as of November 2, 1998)
813069 1 Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 380-416 Volt/50 Hz Models ONLY
(for models mfd. as of January 7, 1999)
813050 1 Blower Motor Mount Assembly Complete
(includes illus. nos. 1 through 13)
For 380 Volt/60 Hz Models ONLY
(for models mfd. prior to January 7, 1999)
2 152034 2 3/8-16 x 3-1/2” Hex Head Bolt
3 152005 4 3/8-16 Hex Nut
4 802232 1 Adjustable Angle Assembly
5 153001 11 5/16” Flat Washer
6 153002 11 5/16” Lock Washer
7 150501 7 5/16-18 x 3/4” Hex Head Machine Bolt
8 152004 4 5/16-18 Hex Nut
9 882078 1 3 HP Blower Motor with Adjusting Plate
(for 208-230/460 volt - 60 Hz and 380/460 volt - 50 Hz models Only)
100043 1 3 HP Blower Motor
(for 208-230/460 volt - 60 Hz and 380-416 volt - 50 Hz models Only)
For Models Mfd. as of January 7, 1999
100081 1 3 HP Blower Motor
(for 380 volt/60 Hz models Only)
For Models Mfd. prior to January 7, 1999
10* 100168 1 5L-360 V-Belt
11 101185 1 2B x 6.2 Motor Bushing
12 101138 1 SDS x 1-1/8” Bore Bushing
13 100706 1 5/16” x 5/16” x 1-3/8” Key

* Replace in matched sets (both belts).

Telephone: (508) 678-9000 Fax: (508) 678-9447

40 Direct Spark Ignition (DSI) Burner Assembly
For Gas Models ONLY

Illus. No. Part No. Qty. Description

1 880874* 1 Direct Spark Ignition (DSI) Natural Gas Burner Assembly Complete
Less Orifices
(includes illus. nos. 1 through 16 and 18 through 36)
880875* 1 Direct Spark Ignition (DSI) Liquid Propane (L.P.) Gas Burner Assembly
Complete Less Orifices
(includes illus. nos. 1 through 16 and 18 through 38)
820201 1 Burner Box ONLY
2 331291 1 Pipe Bracket
3 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
4 142813 1 3/4” x 32-1/2” Pipe
5 141300 1 3/4” Union Shut-off
6 142701 1 3/4” Closed Nipple
7 142601 1 3/4” Union
8 142710 1 3/4” x 4” Nipple
9 142504 1 3/4” x 90° Elbow
10 142734 1 3/4” x 5 1/2” Nipple
11 150413 2 #10-16 x 1/2” Torx Crimptite Screw
12 331291 1 Gas Valve Pipe Bracket
13 140026 1 3/4” Direct Spark Ignition (DSI) 24 VAC Redundant (natural gas) Gas Valve
(3/4” to 1/2” reducing bushing included with gas valve)
140411 - 24 VAC Gas Valve Liquid Propane (L.P.) Conversion Kit
14 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
15 331291 1 Gas Valve Pipe Bracket
16 141208 1 3-Port Manifold

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Direct Spark Ignition (DSI) Burner Assembly (continued) 41
For Gas Models ONLY

Illus. No. Part No. Qty. Description

17** 140832 3 #4 Burner Orifice (natural gas) ONLY

140819 3 #30 Burner Orifice (liquid propane [L.P.] gas) ONLY
18 150309 4 #10-16 x 1/2” Hex Head TEK Crimptite Screw
19 331288 1 Manifold Support ONLY
20 150309 6 #10-16 x 1/2” Hex Head TEK Crimptite Screw
21 141110 3 Burner Tube ONLY
22 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
23 331287 1 Burner Tube Support ONLY
24 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
25 150309 6 #10-16 x 1/2” Hex Head TEK Crimptite Screw
26 --------- 1 Sail Switch
(refer to Sail Switch Assembly on page 48)
27 331289 1 Burner Box Cover Plate ONLY
28 150413 1 #10-16 x 1/2” Phillips Round Head Screw
29 331290 1 Ignitor/Flame-Probe Sight Hole Disc ONLY
30 880325 1 Ignitor High Voltage (HV) Wire/Connector ONLY
(includes high voltage [HV] wire and connector)
305410 1 Direct Spark Ignition (DSI) Ignitor Gap Feeler Gauge...Not Illustrated
31 880330 1 Direct Spark Ignition (DSI) Ignitor High Voltage (HV) Wire/Connector ONLY
32 150413 2 #10-16 x 1/2” Phillips Round Head Screw
33 151000 2 #6-32 Pal Nut
34 130201**** 1 330° Hi-Limit Small Manual Reset Thermostat ONLY
(for models mfd. as of May 26, 1998)
130401 1 330° Hi-Limit Thermostat ONLY
(for models mfd. prior to May 26, 1998)
35 150001 2 #6-32 x 1/2” Round Head Machine Screw
36 142924 1 1” to 3/4” Reducing Coupling
142937 1 1” BSPT x 3/4” N.P.T. Coupling (for CE models Only)
37*** 332256 1 Liquid Propane (L.P.) Burner Baffle ONLY
38*** 150309 5 #10-16 x 1/2” Hex Head TEK Crimptite Screw
--- 880886** 1 Direct Spark Ignition (DSI) Liquid Propane (L.P.) Conversion Kit
(with 3/4” White-Rodgers gas valve)

* Orifices are not included and must be ordered separately.

** Consult factory for elevations over 2,000 feet.
*** For liquid propane (L.P.) gas models ONLY.
**** ADC Part No. 130201 (330° Hi-Limit Small Manual Reset Thermostat) can and should be used in place
of ADC Part No. 132401 (330° Hi-Limit Thermostat).

Telephone: (508) 678-9000 Fax: (508) 678-9447

42 Direct Spark Ignition (DSI) Module Assembly
For Gas Models Mfd. as of April 1, 2000

Illus. No. Part No. Qty. Description

1 128935 1 Direct Spark Ignition (DSI) Module ONLY - 50/60 Hz

(for models mfd. as of April 1, 2000)
2 820100 1 Direct Spark Ignition (DSI) Module Mount Assembly ONLY
3 121400 2 Universal Bushing
4 150522 3 1/4-20 x 1/2” Hex Head TEK Screw
5 150301 1 #8-18 x 7/16” Phillips Pan Head TEK Screw
6 153010 4 #6 Star Washer
7 152000 4 #6-32 Hex Nut
8 120102 2 3/8” Straight x 1/2” Knock-Out Connector

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Direct Spark Ignition (DSI) Module Assembly 43
For Gas Models Mfd. prior to April 1, 2000

Illus. No. Part No. Qty. Description

1 880815 1 ADC Direct Spark Ignition (DSI) Module ONLY - 50/60 Hz

2 820100 1 Direct Spark Ignition (DSI) Module Mount Assembly ONLY
3 121400 3 Universal Bushing
4 152014 3 1/3-20 Free Spin Wash Nut
5 150301 1 #8-18 x 7/16” Phillips Pan Head TEK Screw
6 153010 4 #6 Star Washer
7 152000 4 #6-32 Hex Nut

Telephone: (508) 678-9000 Fax: (508) 678-9447

44 Electric Oven Assembly
For Electric Models ONLY

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Electric Oven Assembly 45
For Electric Models ONLY

Illus. No. Part No. Qty. Description

1 803015 1 Electric Oven Box ONLY

(for models mfd. as of December 8, 1997)
803002 1 Electric Oven Box ONLY
(for models mfd. prior to December 8, 1997)
---------* 1 Electric Oven Assembly Complete
2 ---------* 18 Electric Element
3 802802 1 Safety Control Bracket ONLY
4 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
5 130400 1 290° Hi-Limit ONLY
6 150309 4 #10-16 x 1/2” Hex Head TEK Crimptite Screw
7 802800 1 Sail Switch Box with Cover and Bracket ONLY
802801 1 Sail Switch Box Assembly Complete
(includes illus. nos. 7 through 15)
8 154004 1 Twin Speed Nut
9 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
10 802799 1 Sail Switch Box with Cover and Bracket ONLY
11 122200 1 Sail Switch ONLY
12 150303 2 #4 x 3/4” Pan Head “A” Machine Screw
13 105500 1 Sail Switch Actuator Rod
14 319202 1 Sail Switch Damper (flat)
15 154002 1 1/8” Push On Fastener
16 150413 8 #10-16 x 1/2” Torx Crimptite Screw
17 803101 4 Element Cover ONLY
18 120081 36 Internal Ceramic Insulator
19 120080 36 External Ceramic Insulator
20 152008 36 #10-32 Hex Nut
21 121011* --- Bus Bar (sold by the foot)
22 121010* --- Terminal Lug
23 153009 36 #10 Star Washer
24 152008 36 #10-32 Hex Nut
25 150413 14 #10-16 x 1/2” Torx Crimptite Screw
26 320823 1 Electric Wire Burner Cover ONLY
(for models mfd. as of December 8, 1997)
321400 1 Electric Wire Burner Cover ONLY
(for models mfd. prior to December 8, 1997)
27 ---------* - Oven Wire (sold by the foot)

* Refer to Electric Oven Component Application Listing on page 54.

Telephone: (508) 678-9000 Fax: (508) 678-9447

46 Electric Oven Relay Box Assembly
208-240 VAC 3ø 50/60 Hz

Illus. No. Part No. Qty. Description

1 320902 1 Electric Oven Relay Box Cover

2 150301 12 #8-18 x 7/16” Phillips Pan Head TEK Screw
3 120710 1 Power Distribution Block
4 151001 2 #8-32 Pal Nut
5 121400 2 Universal Bushing
6 132004 1 Transformer
(for ALL microprocessor controller [computer] models and timer models)
7 150108 3 #8-32 x 1/2” Pan Head Machine Screw
8 121010 1 L-70 Terminal Lug
9 151001 1 #8-32 Pal Nut
10 150108 1 #8-32 x 1/2” Pan Head Machine Screw
11 131385 2 Single Pole Single Throw (SPST) 112-Amp - 24 VAC Relay
12 151001 3 #8-32 Pal Nut
13 150521 2 1/4-20 x 2” Carriage Bolt
14 120706 1 Power Distribution Block
15 152014 2 1/4-20 Free Spin Wash Nut

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Electric Oven Relay Box Assembly 47
380-416/480 VAC 3ø 50/60 Hz

Illus. No. Part No. Qty. Description

1 320902 1 Electric Oven Relay Box Cover

2 150301 12 #8-18 x 7/16” Phillips Pan Head TEK Screw
3 150300 3 #10 x 1/2” Hex Washer TEK Screw
4 132004 1 Transformer (for ALL electric models - 380 VAC thru 480 VAC)
5 121400 2 Universal Bushing
6 150108 3 #8-32 x 1/2” Pan Head Machine Screw
7 121010 1 L-70 Terminal Lug
8 151001 1 #8-32 Pal Nut
9 151001 3 #8-32 Pal Nut
10 152014 2 1/4-20 Free Spin Wash Nut
11 150108 1 #8-32 x 1/2” Pan Head Machine Screw
12 131385 1 Single Pole Single Throw (SPST) 112-Amp - 24 VAC Relay
13 120706 1 Power Distribution Block
14 150501 2 1/4-20 x 2” Carriage Bolt

Telephone: (508) 678-9000 Fax: (508) 678-9447

48 Sail Switch Assembly

Illus. No. Part No. Qty. Description

1 105500 1 Sail Switch Actuator Rod

2 319202 1 Sail Switch Damper (flat)
3 154002 1 1/8” Push On Fastener
4 802800 1 Sail Switch Box Cover and Bracket ONLY
802801 1 Sail Switch Box Assembly Complete
(includes illus. nos. 1 through 4 and 6 through 10)
5 150309 2 #10 x 1/2” Hex Head TEK Crimptite Screw
6 150303 2 #4 x 3/4” Pan Head “A” Machine Screw
7 122200 1 Sail Switch ONLY
8 802799 1 Sail Switch Box Cover and Bracket ONLY
9 150413 2 #10-16 x 1/2” Torx Crimptite Screw
10 154004 1 Twin Speed Nut

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Steam Damper Assembly 49
For Steam Models ONLY

Illus. No. Part No. Qty. Description

1 165012 1 Steam Coil Assembly

165019 1 Steel Steam Coil Assembly (optional)
2 153002 6 5/16” Lock Washer
3 152004 6 5/16-18 Hex Nut
4 152002 4 1/4-20 Hex Nut
5 153007 4 1/4” Lock Washer
6 820321 2 Steam Damper Hinge Assembly
7 820320 1 Steam Damper Assembly
(includes illus. nos. 7, 10, and 11)
8 153007 4 1/4” Lock Washer
9 152002 4 1/4-20 Hex Nut
10 115995 84 Steam Damper Gasket (sold by the inch)
11 102350 1 Steam Damper Foam (68-1/2” length)
12 151007 1 7/16-20 Stainless Steel Acorn Nut
13 152007 1 7/16-20 Hex Nut
14 100499 1 1-1/2” Bore x 3” Stroke Piston
15 100500 1 Piston Support Bracket
16 152002 4 1/4-20 Hex Nut
17 153007 4 1/4” Lock Washer
18 100472 1 1/4” x 1/8” Connector
19 143110 1 1/4” Tubing (sold by the foot)
20 100472 1 1/4” x 1/8” Connector
21 100496 1 1/8” Needle Valve
22 143238 1 1/8” Close Nipple
23 100498 1 3-Way Micro Valve - 24 VAC
24 150002 2 #6-32 x 1” Slotted Machine Screw
25 153010 2 #6 Star Washer
26 152000 2 #6-32 Hex Nut
27 330987 1 Micro Valve Support Bracket
28 152002 2 1/4-20 Hex Nut
29 153007 2 1/4” Lock Washer
30 100520 1 1/8” N.P.T. Silencer (muffler)

Telephone: (508) 678-9000 Fax: (508) 678-9447

50 Microprocessor Reversing Contactor Mounting Panel Assembly

Illus. No. Part No. Qty. Description

1 332346 1 Contactor/Relay Mounting Panel ONLY

2 121010 1 L-70 Ground Lug
3 150108 1 #8-32 x 1/2” Pan Head Machine Screw
4 153001 2 5/16” Flat Washer
5 153002 2 5/16” Lock Washer
6 152004 2 5/16-18 Hex Nut
7 120765 2 End Stop/Bracket
8 132445 1 3 HP Impellor (fan/blower) Contactor
9 132467 1 208 Volt Blower Overload (for 208/230/240 volt models Only)
132468 1 380 Volt Blower Overload (for 380/460/480/575/600 volt models Only)
10 882386 1 Reversing (impellor/blower/fan) Contactor - 24 VAC
132458 1 Reversing Contactor with N.C. Connection
11 137060 1 Arc Suppressor (A.S.) Board (3)
12 137013 4 Nylon Standoff
13 --------- 1 Step Down Transformer
(refer to Step Down Transformer Application Listing on page 53)
14 150300 4 #10 x 1/2” Hex Washer TEK Screw
15 150008 2 #6-32 x 1-1/4” Slotted Round Head Machine Screw
16 120701 1 4-Position Power Distribution Block
17 151000 2 #6-32 Pal Nut
18 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
19 120768 9 Din Mounting Rail (sold by the inch)

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Dual Timer Reversing Contactor Mounting Panel Assembly 51

Illus. No. Part No. Qty. Description

1 332346 1 Contactor/Relay Mounting Panel ONLY

2 121010 1 L-70 Ground Lug
3 150108 1 #8-32 x 1/2” Phillips Pan Head Machine Screw
4 153001 2 5/16” Flat Washer
5 153002 2 5/16” Lock Washer
6 152004 2 5/16-18 Hex Nut
7 120765 2 End Stop/Bracket
8 132445 1 3 HP Impellor (fan/blower) Contactor
9 132467 1 208 Volt Blower Overload (for 208/230/240 volt model Only)
132468 1 380 Volt Blower Overload (for 380/460/480/575/600 volt model Only)
10 882386 1 Reversing (impellor/fan/blower) Contactor - 24 VAC
132458 1 Reversing Contactor with N.C. Connection
11 150108 2 #8-32 x 1/2” Phillips Pan Head Machine Screw
12 132198 1 Reversing Timer ONLY (50/60 Hz) - 24 VAC
13 151001 2 #8-32 Pal Nut
14 --------- 1 Step Down Transformer
(refer to Step Down Transformer Application Listing on page 53)
15 150300 4 #10 x 1/2” Hex Washer TEK Screw
16 150008 2 #6-32 x 1-1/4” Slotted Round Head Machine Screw
17 120701 1 4-Position Power Distribution Block
18 151000 2 #6-32 Pal Nut
19 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
20 120768 9 Din Mounting Rail (sold by the inch)

Telephone: (508) 678-9000 Fax: (508) 678-9447

52 Extended Back Guard Assembly

Illus. No. Part No. Qty. Description

1 813029 1 Top Back Guard

2 150301 12 #8-18 x 7/16” Phillips Pan Head TEK Screw
3 354000 1 Gas and Electric Lower Back Guard
354003 1 Steam Lower Back Guard
4 112017 1 ADC Name and Address Label
5 112229 1 Installation Instructions Label
6 112519 1 Routine Maintenance Label
7 --------- 1 Dryer Data Label
8 112534 1 Phase 5 OPL Program Location Label
(for microprocessor models Only)

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Step Down Transformer Application Listing 53

STEP DOW N TRANSFORM ER APPLICATION LISTING

(REVERSING RELAY BOX)
TRANSFORMER PART NUMBER
WIRE
HEAT VOLTAGE MICROPROCESSOR
SERVICE TIMER MODELS
MODELS
380 3 or 4 132059 132059
GAS 416 3 or 4 132062 132062
440 3 or 4 132056 132056

STEAM 460/480 3 or 4 132053 132053

575 3 132050 132050
380 3 or 4 132059 N/R
416 3 or 4 132062 N/R
ELECTRIC
460/480 3 or 4 132053 N/R
575 3 N/A N/A
N/A = Not available. N/R = Not required.

Telephone: (508) 678-9000 Fax: (508) 678-9447

54 Electric Oven Component Application Listing
For Electric Models ONLY

VOLTS 208 230 380 416 480

72 KW OVEN

PHASE 3ø 3ø 3ø 3ø 3ø

WIRE 3 3 3 or 4 3 or 4 3 or 4

OVEN ASSY. PART NO. 815816 815817 815820 815821 815822

QTY. 18 18 18 18 18

ELEMENTS SIZE 4 Kw 4 Kw 4 Kw 4 Kw 4 Kw

PART NO. 120008 120009 120044 120008 120009

QTY.* 6’ 25’ 6’ 25’ 3’ 8’ 3’ 25’ 3’ 25’

OVEN WIRE SIZE #2 #8 #2 #8 #2 #8 #2 #8 #2 #8

PART NO. 133302 133100 133302 133100 133302 133100 133302 133100 133302 133100

TERMINAL QTY. 13 6 13 6 9 1 9 1 9 1
LUG PART NO. 121010 121012 121010 121012 121010 121012 121010 121012 121010 121012

BUS BAR PART NO. 121011* 2’ 2’ 3’ 3’ 3’

VOLTS 208 230 380 416 480

PHASE
80 KW OVEN

3ø 3ø 3ø 3ø 3ø

WIRE 3 3 3 or 4 3 or 4 3 or 4

OVEN ASSY. PART NO. 815823 815824 815810 815826 815827

QTY. 18 18 18 18 18

ELEMENTS SIZE 4.5 Kw 4.5 Kw 4.5 Kw 4.5 Kw 4.5 Kw

PART NO. 120047 120048 120022 120047 120048

QTY.* 6’ 25’ 6’ 25’ 3’ 25’ 3’ 25’ 3’ 25’

OVEN WIRE SIZE #2 #8 #2 #8 #1 #8 #1 #8 #2 #8

PART NO. 133302 133100 133302 133100 133301 133100 133301 133100 133302 133100

TERMINAL QTY. 18 18 10 1 18 1 18 1
LUG PART NO. 121010 121010 121010 121012 121010 121012 121010 121012

BUS BAR PART NO. 121011* 8’ 8’ 11’ 11’ 11’

* Sold by the foot.

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Electric Oven Power Distribution 55
72 Kw 208-240 VAC 3ø 50/60 Hz

ELEMENT 24 VAC
ELECTRIC QTY. OVEN WIRE SIZE
PART CONTACTOR STEP DOWN
SERVICE ELEMENTS AMPS
NUMBER A B C TRANSFORMER
208v 3ø 3, 4w 18 120008 200 2 2 8 131385 132004
240v 3ø 3, 4w 18 120009 174 2 2 8 131385 132004

Telephone: (508) 678-9000 Fax: (508) 678-9447

56 Electric Oven Power Distribution
72 Kw 380-416/480 VAC 3ø 50/60 Hz

ELEMENT 24 VAC
ELECTRIC QTY. OVEN WIRE SIZE
PART CONTACTOR STEP DOWN
SERVICE ELEMENTS AMPS
NUMBER A B TRANSFORMER
308v 3ø 3, 4w 18 1200044 110 2 8 131385 132004
416v 3ø 3, 4w 18 120008 100 2 8 131385 132004
480v 3ø 3, 4w 18 120009 87 2 8 131385 132004

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Electric Oven Power Distribution 57
80 Kw 208-240 VAC 3ø 50/60 Hz

ELEMENT 24 VAC
ELECTRIC QTY. OVEN WIRE SIZE
PART CONTACTOR STEP DOWN
SERVICE ELEMENTS AMPS
NUMBER A B C TRANSFORMER
208v 3ø 3, 4w 18 1200047 222 2 2 8 131385 132004
240v 3ø 3, 4w 18 120048 193 2 2 8 131385 132004

Telephone: (508) 678-9000 Fax: (508) 678-9447

58 Electric Oven Power Distribution
80 Kw 380-416/480 VAC 3ø 50/60 Hz

ELEMENT 24 VAC
ELECTRIC QTY. OVEN WIRE SIZE
PART CONTACTOR STEP DOWN
SERVICE ELEMENTS AMPS
NUMBER A B TRANSFORMER
308v 3ø 3, 4w 18 1200022 122 1 8 131385 132004
416v 3ø 3, 4w 18 120047 111 1 8 131385 132004
480v 3ø 3, 4w 18 120048 96.3 2 8 131385 132004

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Electric Oven Wiring 59
72/80 Kw 208-240 VAC 3ø 50/60 Hz

Telephone: (508) 678-9000 Fax: (508) 678-9447

60 Electric Oven Wiring
72/80 Kw 380-416/480 VAC 3ø 50/60 Hz

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Sprinkler Pneumatic Assembly 61

Illus No. Part No. Qty. Description

1 150524 2 1/4-20 x 2” Long Bolt

2 153007 2 1/4” Lock Washer
3 153018 4 1/4” Flat Washer
4 100556 1 Sprinkler Solenoid Valve, 120 Volt
5 100462 1 3/8” Silencer
6 143283 1 3/8” Poly x 3/8” M.P.T. Connector, Brass
7 143151 1 1/4” Compression x 3/8” M.P.T. Elbow, Brass
8 143100 5 1/4” Aluminum Tubing
9 821532 1 Sprinkler Solenoid Bracket
10 150522 4 1/4-20 x 1/2” Long TEK Screw

Telephone: (508) 678-9000 Fax: (508) 678-9447

62 Sprinkler Panel Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Sprinkler Panel Assembly 63

Illus No. Part No. Qty. Description

1 120768 5-1/2 35 x 15 mm Din Rail

2 150300 2 #10 x 1/2” Self Drilling Sheet Metal Screw
3 120766 1 End Section
4 120758 7 Feed Thru Terminal Block
5 136033 1 3-Amp 3AG Fuse
6 120756 1 1/4” Fuse Terminal Block with Light Emitting Diode (L.E.D.)
7 120761 9 4 Position Feed Thru Terminal Block
8 120750 2 Ground Terminal Block
9 136050 2 3AG 1-Amp Fuse (slo blo)
10 120999 4 Blank Marking Tag
11 120721 2 Disconnect Fuse Block 3AG
12 136039 1 5 x 20 mm 250 mA Med. LAG Fuse
13 120754 1 5 x 20 mm Fuse Terminal Block with Light Emitting Diode (L.E.D.)
14 131409 2 Hold Down Spring
15 131405 2 Double Pole Double Throw Relay
16 131408 2 Relay Socket with Screw Terminals
17 150106 3 #8-32 x 1” Phillips Head Machine Screw
18 150108 4 #8-32 x 1/2” Machine Screw
19 153000 4 #8 Flat Washer
20 132091 1 208-240 Volt to 120 Volt Transformer
21 333002 1 Temperature Controller Mounting Bracket
22 153000 2 #8 Flat Washer
23 150108 2 #8-32 x 1/2” Machine Screw
24 821761 1 Digital Controller Assembly
25 331499 1 Sprinkler Electrical Panel
26 122424 1 Power Warning Label
27 821990 1 J-Box with Hinged Cover

Telephone: (508) 678-9000 Fax: (508) 678-9447

64 Sprinkler Pipe Assembly

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Sprinkler Pipe Assembly 65

Illus No. Part No. Qty. Description

1 143556 1 1” Ball Valve

2 142579 1 3/4” x 2” Nipple
3 142602 1 1” Union
4 142579 1 3/4” x 2” Nipple
5 142548 1 1” x 90º Elbow
6 152002 2 1/4-20 Hex Nut
7 150522 2 1/4-20 x 1/2” Hex Head TEK Screw
8 332429 1 Rear Sprinkler Bracket
9 142584 1 1” x 4-1/2” Nipple
10 154350 1 1” Pipe U-Bolt
11 100565 1 1” Water Valve, Air Operated
(for models mfd. as of September 1, 1996)
881414 1 1” Water Valve, Air Operated
(for models mfd. prior to September 1, 1996)
12 143227 1 1/4” Compression x 1/4” M.P.T. Elbow, Brass
(for models mfd. as of July 7, 1996)
143210 1 1/4” Compression x 1/4” M.P.T. Elbow, Brass
(for models mfd. prior to July 7, 1996)
13 143100 5 1/4” Aluminum Tubing
14 152002 2 1/4-20 Hex Nut
15 150522 2 1/4-20 x 1/2” Hex Head TEK Screw
16 332429 1 Rear Sprinkler Bracket
17 142709 1 3/4” x 2” Nipple
18 154350 1 1” Pipe U-Bolt
19 142924 1 1” x 3/4” Reducing Coupling
20 142709 1 3/4” x 2” Nipple
21 142504 1 3/4” x 90º Elbow
22 142709 1 3/4” x 2” Nipple
23 142504 1 3/4” x 90º Elbow
24 102326 1 Sprinkler Pipe Gasket
25 142750 1 3/4” x 46” Nipple with 1/8” Holes
26 321610 1 Sprinkler Sensor Support Bracket
27 150522 2 1/4-20 x 1/2” Hex Head TEK Screw
28 142933 1 3/4” Pipe Strap
29 153007 2 1/4” Lock Nut
30 152002 2 1/4-20 Hex Nut
31 142751 1 3/4” Pipe End Cap

Telephone: (508) 678-9000 Fax: (508) 678-9447

66 Relay Panel (Sprinkler Option)

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Relay Panel (Sprinkler Option) 67

Illus No. Part No. Qty. Description

1 332346 1 Contactor/Relay Mounting Panel

2 121010 1 L-70 Ground Lug
3 150108 1 #8-32 x 1/2” Pan Head Machine Screw
4 153001 2 5/16” Flat Washer
5 153002 2 5/16” Lock Washer
6 152004 2 5/16-18 Hex Nut
7 120765 2 End Stop/Bracket
8 132445 1 3 HP Impellor (blower/fan) Contactor
9 132467 1 208 Volt Blower Overload
(for use on models mfd. for 208/230/240 V electric service)
132468 1 380 Volt Blower Overload
(for use on models mfd. for 380/460/480/575/600 V electric service)
10 132444 1 3 HP Control Relay with a 110 V Coil
11 137060 1 Arc Suppressor (A.S.) Board
12 137013 4 Nylon Standoff
13 -------- 1 Step Down Transformer
(refer to Step Down Transformer Application Listing on page 53)
14 150300 4 #10 x 1/2” Hex Washer TEK Screw
15 150008 2 #6-32 x 1/4” Slotted Round Head Machine Screw
16 120701 2 4-Position Power Distribution Block
17 151000 2 #6-32 Pal Nut
18 150415 2 #10-16 x 1/2” Phillips Round Head Crimptite Screw
19 120768 9 Din Mounting Rail (sold by the inch)
20 132431 1 Reversing Contactor 24 VAC
132432 2 Contact Replacement Coil 24 VAC

Telephone: (508) 678-9000 Fax: (508) 678-9447

68 Temperature Sensor Assembly For Sprinkler

Illus No. Part No. Qty. Description

1 331877 1 Temperature Sensor Mounting Plate

2 150523 2 1/4-20 x 3/4” Hex Washer Machine Bolt
3 881312 1 Temperature Probe Assembly
4 143296 1 1/4” Compression Fitting
5 120649 1 1/2” N.P.T. Cord Grip (green)
6 120914 1 1/2” Metal Clad “O” Ring
7 120915 1 1/2” N.P.T. Locknut
8 122736 3 18 AWG Ferrule (yellow)
9 881228 1 Sprinkler Temperature Probe Assembly
(includes illus. nos. 9 and 12)
10 152000 2 #6-32 Hex Nut
11 120703 1 6 Position Screw Connector
12 122427 1 Caution Label
13 150008 2 #6-32 x 1-1/4” Machine Screw

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

Back Guard Assembly 69

Illus No. Part No. Qty. Description

1 881306 1 Top Back Guard

2 150301 12 #8-18 x 7/16” Phillips Pan Head TEK Screw
3 354000 1 Lower Back Guard
4 112017 1 ADC Name and Address Label
5 112229 1 Installation Instructions Label
6 112519 1 Routine Maintenance Label
7 ——— 1 Dryer Data Label
8 112534 1 Phase 5 OPL Program Location Label
(Microprocessor Models Only)

Telephone: (508) 678-9000 Fax: (508) 678-9447

70 Additional Parts Available

Part No. Description

112280 “Clean Lint Screen” Label

114001 “CAUTION-Exhausted/Lint Screen” Label
114006 “WARNING - Fire Hazards” Label
120100 3/8” Straight (BX) Connector
120300 3/8” x 45° (BX) Connector
120400 3/8” Red Jacket (BX) Insulator
120500 3/8” Jiffy Clip (BX retainer clip)
120600 3/8” Greenfield (BX)
120800 1/4” In-Line Connector
120802 Red Butt Connector
120902 #74B Wire Nut
120903 Crimp-On Wire Nut
121014 1/4” Insulated (female) Terminal
121026 Tab Receptacle Combination
121499 5-1/2” Harness Tie
121500 8” Harness Tie
122503 Harness Tie Mounting Clip
122804 Manometer (water column test gauge)
121507 Snap Wire Tie Screw Mount
880200 Electrical Terminal (assortment) Kit

American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781

ADC 450160 1 - 12/02/95-100 2 - 08/22/96-100 3 * 04/24/97-100
4 - 08/05/98-50 5 * 04/27/99-50 6 * 09/13/99-50
7 - 03/02/00-50 8 * 09/11/00-25 9 * 12/03/01-25