Scribd
Upload
47 views2 pages

MUR460

This document provides specifications for the MUR440 and MUR460 ultrafast plastic rectifiers. Some key details: - They are plastic packaged rectifiers rated for 400-600V reverse voltage and 4A forward current. - Features include a UL 94V-0 flame rating, ultrafast recovery for high efficiency switching, and high temperature operation and soldering capability. - They have an axial lead design and are intended for use in high frequency power supplies, inverters, and as free-wheeling diodes. - Electrical ratings and characteristics include maximum voltages and currents, forward and reverse recovery times in the 50ns range, and a typical thermal resistance of 28°C/W

Uploaded by

freddy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
47 views2 pages

MUR460

This document provides specifications for the MUR440 and MUR460 ultrafast plastic rectifiers. Some key details: - They are plastic packaged rectifiers rated for 400-600V reverse voltage and 4A forward current. - Features include a UL 94V-0 flame rating, ultrafast recovery for high efficiency switching, and high temperature operation and soldering capability. - They have an axial lead design and are intended for use in high frequency power supplies, inverters, and as free-wheeling diodes. - Electrical ratings and characteristics include maximum voltages and currents, forward and reverse recovery times in the 50ns range, and a typical thermal resistance of 28°C/W

Uploaded by

freddy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MUR440 and MUR460

Ultrafast Plastic Rectifiers


Reverse Voltage 400 to 600 Volts Forward Current 4.0 Amperes
Features
‹ Plastic package has Underwriters Laboratories Flammability
Classification 94V-0
‹ Ideally suited for use in very high frequency switching
power supplies, inverters and as a free wheeling diode
‹ Ultrafast recovery time for high efficiency
‹ Excellent high temperature switching
‹ Glass passivated junction
‹ High temperature soldering guaranteed:
250oC/10seconds, 0.375” (9.5mm) lead length,
5 lbs. (2.3Kg) tension

Mechanical Data
‹ Cases: JEDEC DO-201AD, molded plastic body over
passivated chip
‹ Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
‹ Polarity: Color band denotes cathode end
‹ Mounting position: Any
‹ Weight: 0.045 ounce, 1.2 grams

Maximum Ratings and Electrical Characteristics


Rating at 25°C ambient temperature unless otherwise specified.

Parameter Symbols MUR440 MUR460 Units

Maximum repetitive peak reverse voltage VRRM 400 600 Volts

Working peak reverse voltage VRWM 400 600 Volts

Maximum DC blocking voltage V DC 400 600 Volts


Maximum average forward rectified current
IF(AV) 4.0 Amps
(See figure 1)
Peak forward surge current 8.3 ms single half sine-wave
IFSM 125.0 Amps
superimposed on rated load (JEDEC Method)
o
at 3.0A, TJ=150 C 1.05
Maximum instantaneous
at 3.0A, TJ=25oC VF 1.25 Volts
forward voltage (Note 1)
at 4.0A, TJ=25oC 1.28
o
Maximum instantaneous reverse current TJ=25 C 10.0 uA
IR
at rated DC blocking voltage (Note 1) TJ=150oC 250 uA
Maximum reverse recovery time
trr 50 nS
at IF=0.5A, IR=1.0A, Irr=0.25A
Maximum reverse recovery time
trr 75 nS
at IF=1.0A, di/dt=50A/us, VR=30V, Irr=10% IRM
Maximum forward recovery time
tf r 50 nS
at IF=1.0A, di/dt=100A/us, recovery to 1.0V
Typical thermal resistance o
RθJA 28 C/W
junction to ambient (Note 2)
o
Operating junction and storage temperature range TJ, TSTG -55 to +175 C

Notes: 1. Pulse test: tp=300us, duty cycle < 2%


2. Lead length = 1/2” on P.C. Board with 1.5” x 1.5” copper surface

253
RATINGS AND CHARACTERISTIC CURVES
(TA = 25oC unless otherwise noted)

254

You might also like