Delta Ia-Ies DX-2100RW-WW Um en 20160914

Industrial Automation Headquarters
Delta Electronics, Inc.

Taoyuan Technology Center
No.18, Xinglong Rd., Taoyuan City,
Taoyuan County 33068, Taiwan
TEL: 886-3-362-6301 / FAX: 886-3-371-6301
Asia
Delta Electronics (Jiangsu) Ltd.
Wujiang Plant 3
1688 Jiangxing East Road,
Wujiang Economic Development Zone
Wujiang City, Jiang Su Province, P.R.C. 215200
TEL: 86-512-6340-3008 / FAX: 86-769-6340-7290
Delta Greentech (China) Co., Ltd.

238 Min-Xia Road, Pudong District,
ShangHai, P.R.C. 201209
TEL: 86-21-58635678 / FAX: 86-21-58630003
Delta Electronics (Japan), Inc.

Tokyo Office
2-1-14 Minato-ku Shibadaimon,
Tokyo 105-0012, Japan
TEL: 81-3-5733-1111 / FAX: 81-3-5733-1211
Delta Electronics (Korea), Inc.

1511, Byucksan Digital Valley 6-cha, Gasan-dong,
Geumcheon-gu, Seoul, Korea, 153-704
DX-2100 Series Industrial

TEL: 82-2-515-5303 / FAX: 82-2-515-5302
Delta Electronics Int’l (S) Pte Ltd.

4 Kaki Bukit Ave 1, #05-05, Singapore 417939
TEL: 65-6747-5155 / FAX: 65-6744-9228
Delta Electronics (India) Pvt. Ltd.

3G Cloud Router
User Manual
Plot No 43 Sector 35, HSIIDC
Gurgaon, PIN 122001, Haryana, India
TEL : 91-124-4874900 / FAX : 91-124-4874945
Americas
Delta Products Corporation (USA)
Raleigh Office
DIACloud Cloud Platform

P.O. Box 12173,5101 Davis Drive,
Research Triangle Park, NC 27709, U.S.A.
TEL: 1-919-767-3800 / FAX: 1-919-767-8080
Delta Greentech (Brasil) S.A.

Sao Paulo Office
Rua Itapeva, 26 - 3° andar Edificio Itapeva One-Bela Vista
01332-000-São Paulo-SP-Brazil
TEL: 55 11 3568-3855 / FAX: 55 11 3568-3865
Europe
Delta Electronics (Netherlands) B.V.
Eindhoven Office
De Witbogt 20, 5652 AG Eindhoven, The Netherlands
TEL : +31 (0)40-8003800 / FAX : +31 (0)40-8003898
2016-09-13
*We reserve the right to change the information in this manual without prior notice.
www.deltaww.com
DX-2100 Series Industrial 3G Cloud
Router User Manual

Table of Contents
Chapter 1 Introduction
1.1 Product Overview .......................................................................................... 1-3

1.1.1 Network Design ...................................................................................... 1-4
1.1.2 Features.................................................................................................1-4
1.1.3 Front Panel Ports and LEDs .......................................................................1-5
1.1.4 Top Panel ............................................................................................... 1-5
1.1.5 Bottom Panel .......................................................................................... 1-6
1.1.6 Dimension .............................................................................................. 1-7
1.2 Package Checklist ......................................................................................... 1-7
Chapter 2 User Interface
2.1 Web-based GUI Configuration ............................................................................................. 2-2

2.1.1 System Connection .................................................................................... 2-2
2.1.2 Default IP Address/Account/Password .......................................................... 2-2
2.1.3 Local Network Setups ................................................................................. 2-2
2.1.4 Logging in ................................................................................................ 2-4
Chapter 3 Functions
3.1 Status ......................................................................................................... 3-3

3.1.1 Device Information ................................................................................. 3-3
3.1.2 Network Status ...................................................................................... 3-5
3.1.3 Routing Table ......................................................................................... 3-5
3.1.4 Local Log .............................................................................................. 3-6
3.1.5 Traffic Statistics ..................................................................................... 3-6
3.1.6 Cloud Status .......................................................................................... 3-7
3.1.7 Connected Device................................................................................... 3-7
3.2 Network ....................................................................................................... 3-7
3.2.1 Cellular Network Configurations ............................................................... 3-7
3.2.2 LAN Configurations ................................................................................ 3-10
3.2.3 Static Routing Rules .............................................................................. 3-11
3.2.4 Dynamic DNS ....................................................................................... 3-13
3.3 Firewall....................................................................................................... 3-14
3.3.1 Firewall Settings ................................................................................... 3-14
3.3.2 DMZ Settings ........................................................................................ 3-14
3.3.3 Port Forward ......................................................................................... 3-15
3.3.4 Port Trigger .......................................................................................... 3-18
3.3.5 URL Filter ............................................................................................. 3-19
3.3.6 MAC Filter ............................................................................................ 3-20
3.3.7 IP Filter ................................................................................................ 3-21
3.4 System ....................................................................................................... 3-22
3.4.1 User Management ................................................................................. 3-22
3.4.2 Time Zone Configurations ....................................................................... 3-23
3.4.3 RS232 ................................................................................................. 3-23
3.4.4 RS485 ................................................................................................. 3-25
3.4.5 Modbus TCP .......................................................................................... 3-29
3.4.6 Log Settings ......................................................................................... 3-32
3.4.7 Firmware Upgrade ................................................................................. 3-33
3.4.8 Backup & Restore .................................................................................. 3-33
3.4.9 Scheduled Jobs ..................................................................................... 3-34
3.4.10 Network Diagnosis................................................................................. 3-36
3.4.11 System Reboot ..................................................................................... 3-37
3.4.12 Privilege Management ............................................................................ 3-37
3.4.13 Event Management ................................................................................ 3-39
3.4.14 Register Management ............................................................................ 3-44
3.5 Cloud Service .............................................................................................. 3-45
3.6 SD Card Quick Configuration ......................................................................... 3-48
Chapter 4 DIACom
4.1 Introduction to DIACom ................................................................................. 4-2

4.1.1 Select a Suitable Firmware Version ........................................................... 4-2
4.1.2 DIACom Installation ............................................................................... 4-3
4.1.3 DIACloud Account Registration ................................................................. 4-3
4.1.4 Bind DIACloud Account ........................................................................... 4-5
4.1.5 Setup a Secure Tunnel ............................................................................ 4-6
4.1.6 Remote Control and Monitoring via DIACom .............................................. 4-9
Chapter 5 DIACloud
5.1 Introduction to DIACloud..................................................................................................... 5-2

5.1.1 Select a Suitable Firmware Version .............................................................. 5-2
5.2 Instructions for DIACloud .................................................................................................... 5-2
5.2.1 Register and Login ..................................................................................... 5-2
5.2.2 Home ....................................................................................................... 5-4
5.2.3 Devices .................................................................................................... 5-6
5.2.4 Alarm ...................................................................................................... 5-15
5.2.5 Secure Tunnels ......................................................................................... 5-16
5.2.6 Sub Users ................................................................................................ 5-18
5.2.7 Logs ....................................................................................................... 5-21
5.2.8 Orders .................................................................................................... 5-21
5.2.9 Profile ..................................................................................................... 5-22
Chapter 6 DIACloud APP
6.1 Introduction to DIACloud APP ......................................................................... 6-2

6.1.1 Devices Supported ................................................................................. 6-2
6.1.2 DIACloud APP Installation ........................................................................ 6-2
6.2 DIACloud APP Function .................................................................................. 6-3
6.2.1 DIACloud APP Login ................................................................................ 6-3
6.2.2 Device List ............................................................................................ 6-4
6.2.3 Device Details ........................................................................................ 6-5
6.2.4 Registers View ....................................................................................... 6-6
6.2.5 Alarm List ............................................................................................. 6-7
1
Chapter 1 Product Introduction
Table of Contents
1.1 Product Overview ....................................................................................... 1-3
1.1.1 Network Design ...................................................................................... 1-4
1.1.2 Features ................................................................................................ 1-4
1.1.3 Front Panel Ports and LEDs ...................................................................... 1-5
1.1.4 Top Panel............................................................................................... 1-5
1.1.5 Bottom Panel ......................................................................................... 1-6
1.1.6 Dimension ............................................................................................. 1-7
1.2 Package Checklist ...................................................................................... 1-7
1-1
DX - 2 1 00 Ser i es I nd us t r i al 3G C lo u d Ro u ter
About This Manual

_1
The user manual is suitable for DX-2100RW-WW. If you need to use the Delta DX-2100 series products in China areas,
please refer to the model name DX-2100RW-CN on the Delta website, or contact our branch offices or distributors.
FCC Interference Statement

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates radio frequency signal and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
---Consult the dealer or an experienced radio/TV technician for help.
CE Declaration of Conformity
In accordance with the Directives 2004/108/EC*, 2014/30/EU, 2006/95/EC*, 2014/35/EU and 1999/5/EC. The test record,
data evaluation and DX-2100RW-WW configurations represented herein are true and accurate under the standards
herein specified.
EN 301 511 V9.0.2 (2003-3)

Test Items:
Radiated spurious emissions – MS allocated channel (Clause 4.2.16)
Radiated spurious emissions – MS in idle mode (Clause 4.2.17)
EN 301 908-1 V7.1.1 (2015-03)
EN 301 489-1 V1.9.2 (2011-09)
EN 301 489-7 V1.3.1 (2005-11)
EN 301 489-24 V1.5.1 (2010-10)
Disclaimers and Limitation of Liabilities

To the maximum extent permitted by law and regardless DELTA be aware or has been advised of the possibility of these
damages, DELTA is not liable to any user or anyone else for: (a) any loss of use, data, reputation, goodwill, credit,
opportunity, economy or profits, whether or not foreseeable; (b) any special, incidental, indirect, consequential, or punitive
damages whatsoever; (c) any losses or damages based on any theory of liability, including breach of contract or warranty,
negligence or other tortious action; (d) any losses or damages resulting from use or unable to use the systems or devices
to which the Software or Services are incorporated or co-operated; and (e) any losses or damages arising from any other
claim or in connection with the use of or access to the Software or Services.
1-2
Ch a pt er 1 Pr o d uc t I ntr od uc ti o n
1.1 Product Overview

The DX-2100RW-WW is a single-port 3G industrial router, an Internet of Things wireless communication product of
1_
industrial grade. Apart from supporting HSPA+/HSUPA/HSDPA/UMTS, the product is also downward compatible with
GSM/GPRS/EDGE mobile network. Moreover, the product is equipped with multiple application interfaces, including
Ethernet interface, RS232 serial interface and RS485 serial interface, and thus can satisfy the user’s various different
application demands.
The product supports DIACloud platform services, and by this platform, convenient and efficient point-to-point connection
with the router, safe and reliable data transmission, remote device management and configuration, remote firmware
upgrading, remote maintenance and other functions can be realized, so as to save the cost of device operation and
maintenance for users.
The product can be widely used in the fields requiring mobile network interconnection, such as industrial automation,
smart home, intelligent building, smart power grids, mobile video surveillance, intelligent self-service and intelligent
transportation.
1-3
1.1.1 Network Design

_1
DIACloud platform services supported, users can connect intelligent devices from different locations to the internet with
DX-2100RW-WW and use point-to-point connection with the router for a safe and reliable data transmission and
additionally save the costs of VPN device operation as well as maintenance. By browsing the web or apps on the
handheld computers, managers can check the data and monitor the devices remotely in real-time
1.1.2 Features
 HSPA+/HSUPA/HSDPA/UMTS: 800/850/900/1700(AWS)/1900/2100 MHz
 GSM/GPRS/EDGE: 850/900/1800/1900 MHz
 Authentication Protocols, CHAP and PAP
 Access Point Name (APN) gateway
 Auto Dial-up Connection
 Provide Dual Port RS232 & RS485 and LAN Port Interfaces for Different Application Demands
 Built-in a Watchdog Timer to Ensure System Stability
 Built-in RTC and Support NTP Server
 Firmware Upgrade Locally and Remotely

 Support Firewall: Stateful Packet Inspection (SPI), Prevent Denial of Service (DoS) Attacks, NAT (Network
Address Translation), Port Trigging, Port Mapping, IP Address Filtering, MAC Address Filtering, URL Filtering,
DHCP Server, Dynamic DNS, Static Routes, Demilitarized Zone (DMZ)
 Various Protocols, TCP/IP, UDP, ICMP, DHCP, HTTP, DNS, SSH and More
 Modbus TCP, Modbus ASCII and Modbus RTU protocol
 Scheduled Task Management
 Servers for Local Log and Remote Log
1-4
 Configurations Backup, Export and Import
 Network Flow Monitoring 1_

 Network Fault Detection and Diagnosis
 DIACloud Service to Secure Point-to-point Data Transmission, to Manage Device Configurations Piece by
Piece or in Batch and to Upgrade Firmware Remotely
1.1.3 Front Panel Ports and LEDs
1.1.4 Top Panel
1-5
1.1.5 Bottom Panel

_1
Notice
This router’s reset button is on the front panel. By pressing the Reset button, users can reset the router or
reset the router to factory default settings. See the instruction below:
 Reset the Router: With the router powered on, press the Reset button and release the button right
away.
 Reset to Factory Defaults: With the router powered on, press and hold the Reset button for 3~6
seconds and then release the button.
 Reset can only be done when the device is running properly.
 With the router powered on, press and hold the Reset button until all the LEDs go out (except
the Power LED). Then release the button and wait the router to reboot to its factory default
settings.
1-6
1.1.6 Dimension
Unit = mm 1_
1.2 Package Checklist

Unpack the package carefully and check the package contents. The package should contain the following items:
 DX-2100RW-WW Industrial 3G Cloud Router x 1
 Quick Installation Guide x 1
 10/100Mbps Ethernet Cable (100cm) x1
 SMA Antenna (300cm) x 1
Notice
Verify that nothing is missing from the DX-2100RW-WW package by using the check list above. If any item
is found missing or damaged, please contact your local sales representative for support.
1-7
2
Chapter 2 User Interface
Table of Contents
2.1 Web-based GUI Configuration ....................................................................... 2-2
2.1.1 System Connection .................................................................................... 2-2
2.1.2 Default IP Address/Account/Password .......................................................... 2-2
2.1.3 Local Network Setups ................................................................................. 2-2
2.1.4 Logging in ................................................................................................. 2-4
2-1
2.1 Web-based GUI Configuration

The DX-2100RW-WW Industrial 3G Cloud Router provides a friendly Web Browser Configuration for users to set up and
operate more intruitivly.
2.1.1 System Connection 換照片

_2 Connect the DX-2100RW-WW with a computer directly or via a switch/hub.
2.1.2 Default IP Address/Account/Password

The default domain name of router is www.diadevice.com, default IP address is 192.168.1.1. The initial account and
password is admin/admin
2.1.3 Local Network Setups

After the connection of the local computer and the router is done, you will need to set the network configruration for your
computer. There are 2 methods for the setting, we prefer you use the first one:
 Obtain an IP address automatically by using the router as a DHCP server.
1. Open Network Connections by clicking the Start button , and then clicking Control Panel.
2. Under Network and Sharing Center, click View network connections.
3. Right-click the connection that you want to change, and then click Properties. If you're prompted for an
administrator password or confirmation, type the password or provide confirmation.
4. Click the Networking tab. Under This connection uses the following items, click either Internet Protocol
Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click Properties.
2-2
C ha pt er 2 I nt r o d uc t i o n to Us er I nt er f ac e
2_
5. Click Obtain DNS server address automatically and then click OK to get a DNS server address automatically
using DHCP.
 Set up the IP address manually.

(The IP address of the computer should be in the same subnet as the router’s.)
2-3
Since the router’s default IP address is 192.168.1.1 and the subnet mask is 255.255.255.0, the computer’s IP
address can be set between 192.168.1.2 to 192.168.1.254. However, you’ll need to make sure there are no IP
conflicts.
Here, we set the address to 192.168.1.10 and the default gateway to 192.168.1.1. For DNS, the usable DNS
address can be selected or the address can also be set to 192.168.1.1.
_2
2.1.4 Logging in
1. Open your Internet Explorer browser and input LAN IP address (Default is 192.168.1.1) or the router’s domain name
(www.diadevice.com) in the search bar and then press Enter.
2. You’ll be prompted with the log-in page. Input the user name and the password (Default is admin/admin) and then
press Enter to log in to the setup page.
3. After login, you can see the main selection area on the left hand side and the upper area of the page. The detailed
settings can be seen on the right hand side of the page.
2-4
C ha pt er 2 I nt r o d uc t i o n to Us er I nt er f ac e
2_
Notice
Considerations of the router LAN port IP will be change after the device is bind
with DIACloud account, we prefer you use 192.168.1.1 and use the
automatically obtained IP address and DNS server for the computer
2-5
3
Chapter 3 Functions
Table of Contents
3.1 Status ........................................................................................................ 3-3
3.1.1 Device Information ................................................................................. 3-3
3.1.2 Network Status ...................................................................................... 3-5
3.1.3 Routing Table......................................................................................... 3-5
3.1.4 Local Log ............................................................................................... 3-6
3.1.5 Traffic Statistics ..................................................................................... 3-6
3.1.6 Cloud Status .......................................................................................... 3-7
3.1.7 Connected Device ................................................................................... 3-7
3.2 Network ..................................................................................................... 3-7

3.2.1 Cellular Network Configurations................................................................ 3-7
3.2.2 LAN Configurations ............................................................................... 3-10
3.2.3 Static Routing Rules .............................................................................. 3-11
3.2.4 Dynamic DNS ....................................................................................... 3-13
3.3 Firewall .................................................................................................... 3-14

3.3.1 Firewall Settings ................................................................................... 3-14
3.3.2 DMZ Settings ....................................................................................... 3-15
3.3.3 Port Forward ........................................................................................ 3-15
3.3.4 Port Trigger ......................................................................................... 3-18
3.3.5 URL Filter ............................................................................................ 3-19
3.3.6 MAC Filter ............................................................................................ 3-20
3.3.7 IP Filter ............................................................................................... 3-21
3.4 System ..................................................................................................... 3-22

3.4.1 User Management ................................................................................ 3-22
3.4.2 Time Zone Configurations ...................................................................... 3-23
3.4.3 RS232 ................................................................................................. 3-23
3.4.4 RS485 ................................................................................................. 3-25
3.4.5 Modbus TCP ......................................................................................... 3-29
3.4.6 Log Settings ........................................................................................ 3-32
3.4.7 Firmware Upgrade ................................................................................ 3-33
3.4.8 Backup & Restore ................................................................................. 3-33
3.4.9 Scheduled Jobs .................................................................................... 3-34
3.4.10 Network Diagnosis ................................................................................ 3-36
3-1
3.4.11 System Reboot .....................................................................................3-37

3.4.12 Privilege Management ............................................................................3-37
3.4.13 Event Management ................................................................................3-39
3.4.14 Register Management ............................................................................3-44
3.5 Cloud Service ........................................................................................... 3-45
3.6 SD Card Quick Configuration .................................................................... 3-48
3-2
CH 3 F u nc t i ons
3.1 Status
You can view summary or detailed information on the Device Information, Network Status, Routing Table, Local Log,
Traffic Statistics, Cloud Status, and Connected Device.
3.1.1 Device Information

This page shows basic information on the Hardware/Software version and Resource Usage Information.
_3
3-3
 Hardware Version
Item Description
RTM Version Release to manufacturing version of the router
Release Date Hardware release date
S/N Serial number of the router
 Software Version
_3 Item Description
RTM Version Release to manufacturing version of the software
Release Date Software release date
Current Version Version number of the software currently used on the router
Upgrade Date Upgrade time of the software currently used on the router
 Resource Usage Information
Item Description
CPU Usage The CPU usage of current router
Total Memory The total memory on the router
Memory Used The memory currently used on the router.
Memory Usage The current ratio of the router usage
3-4
C ha pt er 3 I ntr o duc t i on t o F u nc t i o ns
3.1.2 Network Status

This page shows basic information on Cellular Network Status and LAN Status.
Cellular Network Status includes the Operator, Signal Strength, Connection Status, Online Duration, Authorization Mode,
APN, Telephone Number, IP Address Network Mask, Gateway Address, primary DNS, and Secondary DNS.
LAN Status includes the Device Name, MAC Address, IP Address, DHCP Server, Lease Time and First IP Address.
_3
3.1.3 Routing Table

This page shows basic information on the routing table, including the Destination, Gateway, Network Mask, HOPS and
Network Interface.
3-5
3.1.4 Local Log

This page shows logs of the router, including the System log, Warning lot and the Debug log. You can use the buttons on
the right hand side to refresh, clear or download the displayed logs.
_3
3.1.5 Traffic Statistics

This page shows network traffic information of the router, including the data sent and received over Cellular and LAN. You
can use the buttons on the right hand side to refresh or clear the traffic information.
3-6
3.1.6 Cloud Status

This page shows cloud server information of the router, including the Registration Status, Service Status, and Activated
Time.
_3
3.1.7 Connected Device

This page shows information of the devices connected to the router, including the IP Address, Host Name, MAC Address.
3.2 Network
You can set up networks, including the WAN Configurations, LAN Configurations, Static Routing Rules and Dynamic
DNS.
3.2.1 Cellular Network Configurations

This page is used for setting up the Cellular Network, including the Operator, Dial-Up Number, User Name, Password,
APN, Dial-Up Mode, Authorization Mode, Redial Interval, Redial Times, Max Idle Time, Connection Check Interval,
Connection Check Times, and MTU.
3-7
_3
Description Default
Operator
Select Auto or Others for the Operator from the dropdown list.
 Auto: the system will detect the operator from the inserted SIM card
AUTO
and set up accordingly.
 Others: users can set up the operator manually.
Dial-Up Number
This number is provided by the operator. When “Auto” is selected, the *99#
3-8
Description Default
system will set the number up automatically and users cannot change the
setting.
User Name
This name is provided by the operator. When “Auto” is selected, the system
N/A
will set the name up automatically and users cannot change the setting.
Password
This password is provided by the operator. When “Auto” is selected, the

system will set the password up automatically and users cannot change the N/A
setting. _3
APN (Access Point Name)
This APN is provided by the operator. When “Auto” is selected, the system
3gnet
will set the APN up automatically and users cannot change the setting.
Dial-Up Mode
Options are :
 Always online: stay connected and once a disconnection is detected,
the router will redial to connect automatically.
 On-demand connection: redial when connection to the internet is on Always online
demand.
 Manual connection: users dial to connect and when it fails to
connect, it will not redial.
Authorization Mod
Options are “Auto”, “PAP” and “CHAP”. Auto
Redial Interval
Set up the time to redial when the system fails to connect. This will only be
executed when the option “Always online” or “On-demand connection” is 30
selected.
Redial Times
Set up the maximum redial time, 0 indicating infinity. This will only be
executed when the option “Always online” or “On-demand connection” is 5
selected.
Max Idle Time
Set up the maximum idle time. When the idle time exceeds the set value,
180
the router will disconnect and then redial, 0 indicating not to disconnect.
Connection Check Interval
Set up the connection check interval. Check the connectivity, if the

connection is lost, it will redial automatically, 0 indicating not to check the 60
connectivity.
Connection Check Times
3-9
Description Default
Set up the connection check times, 0 indicating infinity. Once a

disconnection is detected, and the option “Always online” or “On-demand
5
connection” is selected, the router will redial according to the set value in
the Redial Times.
MTU
Maximum Transmission Unit is the largest packet that can be transmitted

1492
over packet based networks.
Auto Detect
_3 If the connection is dropped, a ping test will launch automatically. Enable
Target Address
www.DIACloudSo
Set the IP/domain of the server that program will do a ping testing.
lutions.com
Dial Failure To Restart
Enable or disable the function if the dial failure will be in the default time to
Disable
restart device.
3.2.2 LAN Configurations

This page is used for setting up the LAN, including the Device Name, IP Address, Network Mask, and DHCP Server.
3-10
Description Default
Device Name
DX2100 + “_” +
Set up a device name for your router. The name shall be composed of
“the last four
letters, numbers and underline, starting with a letter or number. The
digits of Mac
maximum string length is 32 bytes.
address”
IP Address
Set up an IP address for your device. 192.168.1.1
Network Mask
Set up the LAN network mask. 255.255.255.0 _3

DHCP Server
If DX router uses DHCP to assign IP addresses automatically on your

network, you can specify the IP address range and lease time for the clients
Enable
on your network. Once the DX router have bound the DIACloud and enabled
the DIACloud DHCP, the DHCP in DX router will be disabled automatically.
Address Lease Time
To set up the address lease time so that a client doesn't hold an IP address
indefinitely. It allows for a mechanism to gracefully reuse DHCP addresses. One day
Options here are 1 to 3 days.
First IP Address
To increase the number of addresses available to clients, you can change

192.168.1.100
the Start Address.
Last IP Address
To increase the number of addresses available to clients, you can change

192.168.1.200
the End Address.
STP
STP is a network protocol that builds a logical loop-free topology for Ethernet
networks. The basic function of STP is to prevent bridge loops and the
Disable
broadcast radiation that results from them. If this STP is enabled, the traffic
usage will increase about 15Mbit in 24 hours.
3.2.3 Static Routing Rules

This page is used for setting up the Static Routing, including the Rule Name, Network Interface, Enabled, Destination IP,
Network Mask, Gateway Address and Metric. Click the “Add A Rule” to add static routing rules.
3-11
After clicking the “Add A Rule”, you will see the following page.
_3
Description Default
Rule Name
Set up a name for your rule. The name shall be composed of letters,
numbers and underline, starting with a letter or number. The maximum string N/A
length is 32 bytes.
Network Interface
For a specific network destination address, select the network interface of

WAN
the router for sending data package. Options are LAN and WAN.
Enabled
Activate the static routing functionality. Yes
Destination IP
Set up a Destination IP address for your device. N/A
Network Mask
Set up the subnet mask corresponding to the destination network segment. If

the final destination of the routing is a single host, please type in N/A
255.255.255.255.
Gateway Address
Set up the next-hop routing address. N/A
Metric
Set up the hops. The number of hops that are passed for reaching the
2
destination address. One hop indicates passing one router passed. The
3-12
Description Default
range is 2~15.
3.2.4 Dynamic DNS

This page is used for setting up the Dynamic DNS Settings, including the Dynamic DNS, Service Provider, Domain User
Name, Password, and the Refreshing Interval.
_3
Description Default
Dynamic DNS
Dynamic Host Configuration Protocol allows you to obtain an IP address

Disable
automatically from your router. You can enable or disable this functionality.
Service Provider
Select the dynamic domain service provider. www.DynDns.org
Domain
The domain applied for to the corresponding dynamic domain service

N/A
provider.
User Name
The name of the user registered at the corresponding dynamic domain

N/A
service provider.
Password
The corresponding password to the registered user. N/A
Refreshing Interval
Set up the time for the router to update its public network IP from the 86400
3-13
Description Default
dynamic domain service provider. The value range is 120~86400 sec.
3.3 Firewall
You can set up firewall configurations, including the Firewall Settings, DMZ Settings, Port Forward, Port Trigger, URL
Filter, MAC Filter, and IP Filter.
3.3.1 Firewall Settings

This page is used for setting up the basic firewall settings, including the SPI firewall switch, WAN Ping response, LAN
SSH function and WAN SSH.
_3
Description Default
Firewall
The SPI Firewall keeps track of the state of network connections travelling
across it, protecting your Internet connection against Internet threats Enable
and Denial of Service (DoS).
WAN Ping
It creates a filter that your router not to respond to Ping command and
prevents other users on the internet from pinging your pc and gaining your Not responded
IP address.
LAN SSH
Set up whether to allow LAN end to connect with the router via SSH. Enable
WAN SSH
Set up whether to allow WAN end to connect with the router via SSH. Disable
3-14
3.3.2 DMZ Settings

This page is used for setting up the DMZ server.
_3
Description Default
DMZ Server
Demilitarized zone (DMZ) is a special segment of the local network reserved

for servers accessible from the Internet, adding an additional layer of Disable
security.
DMZ Host IP Address
Set up the IP address for the DMZ host. N/A
3.3.3 Port Forward

This page is used for setting up the port forward, including configuring the Network Services, Service Name, Protocol,
Public Port, Server Port, and Server IP Address.
Click the “Add A Portforward Rule” to add port forwarding entries to the router.
After clicking the “Add A Portforward Rule”, you will see the following page.
3-15
_3
Description Default
Network Services
Select the common network services. Refer to the following common service
Customized
list for optional values.
Service Name
Set up the service name for port forwarding. The name is composed of letters,
length is 32 bytes.
Protocol
Set up the protocol type for port forwarding. TCP/UDP
Public Port
Set up the public port for port forwarding. The port range is 1~65534. A Public
Single Port
port should be less than or equal to the server port.
Server Port
Set up the server port for port forwarding. The port range is 1~65534. A server
port should be greater than or equal to the public port.
When the public port is set to a Single Port, the server port can only be set to a
Single Port. When the public port is set to a Port Range, the server port can be
set to a Single Port or a Port Range. And when the public port is set to a single
port, all the port will be forwarded to ONE single port. Single Port
Examples of different port forwarding settings:
1:1
3-16
Description Default
N:1
N:N
Server IP Address
_3
Set up the server IP address that applies to the port mapping rule. 192.168.1.*
Common Service List for Port Forwarding
Service name Protocol Starting Port Ending Port
Customized TCP, UDP, TCP/UDP 1~65534 1~65534
FTP TCP 20 21
HTTP TCP 80 80
ICUII TCP 23566 23566
IP_PHONE TCP 6670 6670
NetMeeting TCP 1720 1720
News TCP 119 119
PPTP TCP/UDP 1723 1723
Telnet TCP 23 23
QuakeII/III TCP/UDP 27960 27960
Real-Audio TCP 6970 7170
3-17
3.3.4 Port Trigger

This page is used for setting up the port trigger, including configuring the Service Name, Service User, Service Type,
Trigger Port, Protocol Role, Begin Port, End Port, and Status.
Port triggering is port forwarding with an on/off switch for the ports that have been forwarded. Have data flown out of a
trigger port or not by enabling or disabling this functionality. Set up the time for the Port Trigger Timeout and click
“Save” to save the setting.
Click the “Add ATrigger Rule” to add port trigger entries to the router.
_3
After clicking the “Add A Trigger Rule”, you will see the following page.
Description Default
Service Name
Set up the service name for port triggering. The name is composed of letters,
length is 32 bytes.
Service User
3-18
Description Default
Select the service user to apply the port triggering rule. Any Address
Service Type
Set up the protocol type for port triggering. TCP
Triggering Port
Set up the triggering port. The port range is 1~65534. N/A
Protocol Role
Set up the protocol type for the inbound connection. TCP/UDP
Begin port _3
Set up the starting port for the inbound connection. The port range is 1~65534. N/A
End Port
Set up the ending port for the inbound connection. The port range is 1~65534. N/A
Status
Enable/disable the port triggering functionality. Disabled
3.3.5 URL Filter

This page is used for setting up the URL Filter, including configuring the URL Address, LAN IP Address and Status.
URL Filter is used to block particular website from the local network. Select Enable/Disable to activate/deactivate this
functionality. Click the “Add An URL Address” to block the URL.
After clicking the “Add An URL Address”, you will see the following page.
3-19
Description Default
URL Address
Manually input the URL address that you’d like to block, for example
N/A
www.baidu.com.
LAN IP Address
Set up the LAN IP address that you’d like to block. Options are “Any Address”,
Any Address
“Single Address” and “Address Range”.
Status
_3 Enable/disable the URL Filter functionality. Enabled
3.3.6 MAC Filter

This page is used for setting up the MAC Filter, including configuring the MAC Address, Device Name and Status.
MAC Filter is used to block particular MAC address from the local network. Select Enable/Disable to activate/deactivate
this functionality. Click the “Add A MAC Address” to block the MAC Address.
After clicking the “Add A MAC Address”, you will see the following page.
Description Default
MAC Address
Manually input the MAC address that you’d like to block. N/A
Device Name
Set up the device name corresponding to the set MAC address. N/A
Status
Enable/disable the MAC Filter functionality. Enabled
3-20
3.3.7 IP Filter
This page is used for setting up the IP Filter, including configuring the Source IP, Source Port, Destination IP, Destination
Port, Protocol and Status.
IP Filter is used to block particular IP address from the local network. Select Enable/Disable to activate/deactivate this
functionality. Click the “Add An IP Address” to block the IP Address.
_3
After clicking the “Add An IP Address”, you will see the following page.
Description Default
Source IP
Set up the source IP. Any Address
Source Port
Set up the source port where the datagram came from. Any port
Destination IP
Set up the destination IP. Any Address
Destination Port
Set up the destination port where the datagram is going to. Any port
Protocol
Set up the protocol type for the IP Filter. TCP/UDP
Status
3-21
Description Default
Enable/disable the URL Filter functionality. Enabled
3.4 System
You can set up the system configurations, including the User Management, Time Zone Configurations, RS232, RS485,
Modbus TCP, Log Setting, Firmware Upgrade, Backup & Restore, Scheduled Jobs, Network Diagnosis, System Reboot,
Event Management, and Register Management.
3.4.1 User Management

You can change the administrator password here. The password must be a combination of 5 to 12 characters, numbers
_3 and/or underline symbols.
Description Default
Old Password
Input the original password. admin
New Password
Input the new password you’d like to use. The password length should be 5-12
digits and is composed of lowercase letters, uppercase letters (case sensitive), N/A
numerals 0-9 and underline.
Confirm Password
Again input the password you’d like to use to double confirm there is no typo. N/A
3-22
3.4.2 Time Zone Configurations

You can change the current time of the device. Use the dropdown list to select the correct time zone for your device.
Description Default _3
The current time of device
Here shows the current time of your device. N/A
Time Zone Setting
Select the operating time zone of your device: GMT-12:00 - GMT+13:00. N/A
3.4.3 RS232
RS232 (Recommended Standard - 232) is a telecommunication standard for binary serial communications between
devices. You can set up the configurations for RS232, including Baud Rate, Data Bits, Stop Bits, Parity Bits and Flow
Control.
3-23
_3
Description Default
Working Mode
Select the working mode for the current active serial port.
 Transparent mode: This mode is suitable for uploading and downloading
data remotely via the serial port.
Close
 Slave mode: This mode is suitable for the PLC to perform the read/ write
tasks on the open register of the DX-2100RW-WW.
 Close: Disable this functionality.
Baud Rate
Set up the baud rate for the serial port. Options are
2400, 4800, 9600, 19200, 38400, 57600 and 9600
115200.
Data Bits
Set up the data bits for the serial port.

 Transparent mode: 7, 8 8
Parameters of COM  Slave mode: 8
Stop Bits
Set up the stop bits for the serial port. Options are
1
1 and 2.
Parity Bits
Set up the parity bits for the serial port. Options are
None
None, Odd and Even.
Flow Control
3-24
Description Default
Set up the flow control. Options are None, XON,

None
XOFF, RTS, and CTS.
Modbus ID
Set up the MODBUS ID. The value is between 1

1
and 247.
Modbus Mode
Slave Mode Set up the communication mode for the device.

ModBus RTU
Device support ModBus RTU and ModBus ASCII
Modbus Timeout _3
Set up the timeout timer from 200ms to 3000ms. If
the set value is out of range, it will be automatically 200ms
changed to its maximum or minimum value.
3.4.4 RS485
RS485 (Recommended Standard - 485) is a telecommunication standard for binary serial communications between
devices. You can set up the configurations for RS485, including Baud Rate, Data Bits, Stop Bits, Parity Bits, and many
more.
3-25
_3
3-26
_3
Description Default
Working Mode
Select the working mode for the current active serial port.
 Transparent mode: This mode is suitable for uploading and downloading
data remotely via the serial port.
 Slave mode: This mode is suitable for the PLC to perform the read/ write
Close
tasks on the open register of the DX-2100RW-WW.
 Master mode: This mode is suitable for the DX-2100RW-WW to perform
the read/write tasks on the open register of the PLC.
 Close: Disable this functionality.
Baud Rate
Set up the baud rate for the serial port. Options are
2400, 4800, 9600, 19200, 38400, 57600 and 9600
115200.
Parameters of COM
Data Bits
Set up the data bits for the serial port.

 Transparent mode: 7, 8 8
 Modbus RTU: 8
3-27
Description Default
Stop Bits
Set up the stop bits for the serial port. Options are 1
1
and 2.
Parity Bits
Set up the parity bits for the serial port. Options are
None
None, Odd and Even.
Modbus ID
_3 Set up the MODBUS ID. The value is between 1 and 247. 1
Modbus Mode
Set up the communication mode for the device. The Device supports ModBus
ModBus RTU
RTU and ModBus ASCII.
Modbus Timeout
Set up the timeout timer from 200ms to 5000ms. If the set value is out of range,
200ms
it will be automatically changed to its maximum or minimum value.
Scan Interval
Set up the time for scan interval, ranging from 20ms

30000ms
to 60000ms.
Read/Write
Set up the access permissions for the mapped

register address;
 Read-only: The device regular read data from
appointed registers in the slave, but will not
update the data to the slave
 Write-only: The device update the data to the
slave when the registers values was Read/Write
changed, but will not read the data from the
Master Mode
slave
 Read/write: The device regular read data from
appointed registers in the slave, will update
the data to the slave when the registers
values is changed.
Slave ID
Set up the corresponding slave communication

N/A
port. The value is between 1 and 247.
Slave Starting Address (decimal)
Set up the slave starting address (decimal) for

read/write the registers in a PLC. The range is from
N/A
0 ~ 65535
P.S. Support the Holding Register :
3-28
Description Default
400001~465535 (Decimal)
Device Starting Address (decimal)

Set up the device starting address (decimal, input
range is from $2048 to $4095). $ specifies that the
match must start at the beginning of a Device N/A
Starting Address.
Length (1-123)
Here displays the number of the continuous

N/A
address followed by the default mapped address.
Add Mappings _3
Click the button to add mappings; up to 100
N/A
addresses can be set up.
Edit
Click an item of register mapping forms that can be

N/A
edited.
Operation
The added mappings can be deleted here. N/A
3.4.5 Modbus TCP

This page is used for configuring the Modbus TCP, including Working Mode, Server IP, Server Port, and Response
Timeout.
3-29
_3
Description Default
Working Mode
The default is OFF. Other options are:
 Modbus TCP Server (Slave): for applications of a PLC to read/write the
open registers in DX-2100RW-WW. DX-2100RW-WW supports up to 32
connections from client. OFF
 Modbus TCP Client (Master): for DX-2100RW-WW to read/write the
open registers in a PLC. DX-2100RW-WW supports to connect to 4
different servers at most.
Server IP
Set up the IP address of a PLC in the Modbus TCP
Client mode N/A
Server Port
Set up the server port of a PLC in the Modbus TCP
Client mode 502
Response Timeout
Modbus TCP Client
Set up the timeout timer from 50ms to 100000ms.
If the set value is out of range, it will be
300
automatically changed to its maximum or minimum
value. The default is 300ms.
Scan Interval
Set up the time for scan interval, ranging from

30000
20ms to 60000ms; the default is 3000ms.
Read/Write
Add Mappings
Set up the access permissions for the mapped Read/Write
3-30
Description Default
register address;
 Read-only: The device regular read data from
appointed registers in the slave, but will not
update the data to the slave
 Write-only: The device update the data to the
slave when the registers values was
changed, but will not read the data from the
slave
 Read/write: The device regular read data
from appointed registers in the slave, will
update the data to the slave when the
_3
registers values is changed.
Slave ID
Set up the corresponding slave communication

N/A
port. The value is between 1 and 247.
Slave Starting Address
Set up the slave starting address (decimal) for

read/write the registers in a PLC. Range is 0 ~
65535 N/A
P.S. Support the Holding Register :
400001~465535 (Decimal)
Device Starting Address
Set up the device starting address (decimal, input

range is from $2048 to $4095). $ specifies that the
N/A
match must start at the beginning of a Device
Starting Address.
Length (1-123)
Here displays the number of the continuous

N/A
address followed by the default mapped address.
Operation
Delete the selected mapped address. N/A
Add Mappings
Click the button to add mappings; up to 100

N/A
addresses can be set up.
Edit
Click to select the records from the mapped address
to edit. N/A
Operation
The added mappings can be deleted here. N/A
3-31
3.4.6 Log Settings

This page is used for configuring the log settings, including Log to Console, Remote Log Service, Remote Log Server
Address, and Port of Remote Log Server.
_3
Description Default
Log to Console
Set up the log to the console port. No
Remote Log Service
Enable/disable the remote log service. Disable
Remote Log Server Address
Set up the remote log server address N/A
Port of Remote Log Server
Set up the remote log server port, ranging from 1 to 65534. 514
Notice
Remote log service is used for qualified engineers to check the device remotely when
errors occurred. With this service, there is no need to log in to the device, device logs can
be exported to the remote log server. The server should support the syslog protocol.
When this functionality is enabled, it will take up some resources. Do not enable this
functionality disabled, unless it’s necessary.
3-32
3.4.7 Firmware Upgrade

This page is used for upgrading the system.
_3
Description Default
Select Firmware
Click “Browse” to select the new firmware file. N/A
Upgrade
Click “Upgrade” to upgrade firmware. The device will reboot after the upgrade
N/A
is done.
3.4.8 Backup & Restore

This page is used for backing up and restoring the configurations.
Description Default
Backup
Click “Backup” to save the device configurations on your computer. N/A
Restore
Click “Browse” to select the backup file and then click “Restore” to restore the
N/A
configurations. The device configuration will be restored to the previous version
3-33
Description Default
and the device will reboot after the restoring is done.
Restore To Factory Default
Click “Restore To Factory Default” to reset the configurations to the factory

N/A
defaults. The device will reboot after the reset is done.
3.4.9 Scheduled Jobs

This page is used for scheduling job configurations, including ADD A New Job, Export Job List, and Import Job List.
_3
3.4.9.1 Add A New Job

Click “Add A New Job”, and then you will see the following page. Follow the instruction to add a new scheduled job.
Description Default
Job Name
Set up a name for your scheduled job. The name shall be composed of letters,
length is 32 bytes.
Enable
Select “Enable” to activate this functionality. Enable
Recurring Job
3-34
Description Default
The scheduled job can be done Once, Every day, Every week, or Every month. Once
And the specific time can be further defined. 01:00
Date
Select a specific date to perform the scheduled job. 2015.01.01
Job Type
Select one of the job type for the scheduled job.

 Restart device
Restart device
 Enable DIACloud Service
 Disable DIACloud Service _3
3.4.9.2 Export Job List
Click “Export Job List” to export the scheduled jobs for future usage.
3.4.9.3 Import Job List

Click “Chose file” to select the scheduled jobs file you have saved and then click “Import Job List” to import the
scheduled jobs you have set before.
3-35
3.4.10 Network Diagnosis

This page is used for diagnosing the network status; methods are Ping Test and Route Trace.
_3
Description Default
Diagnosing Method
Select the Diagnosing Method; options are Ping Test and Route
Ping Test
Trace.
Host Name/IP Address
Select the domain name or IP address of the server that you want
to test. The default options are www.google.com, www.yahoo.com,
www.MSN.com, www.amazon.com, www.wikipedia.org, www.diacloudsolutions.com
www.facebook.com, www.diacloudsolutions.com and others. When
user choose others, user can input the domain/IP manual.
Start
Click “Start” to start the network diagnosing. While running the

N/A
network diagnosing, the settings cannot be changed.
3-36
3.4.11 System Reboot

This page is used for manually rebooting the system. Click “Restart Device” and the system will reboot.
3.4.12 Privilege Management

Privilege management use in order to set the white list of phone numbers and the device operation can be triggered via _3
the specific SMS text from the white list of phone numbers.
The SMS commands listed below:

Function SMS Command Description
List all SMS commands and
SMS Query commands “ZLCX” or “zlcx”
explanations.
Discover the router's current status
information, including the following:
Status Query “ZTCX” or “ztcx”
1. Cellular network state
2. Firewall state
3. DIACloud state
Restart Device “CQLY” or “cqly” Restart the router
Enable cellular network “KQBH” or “kqbh” Dial-up the router to internet
Disable cellular network “DKBH” or “dkbh” The router disconnects from the internet
Enable DIA cloud service “KQVD” or “kqvd” DIA cloud service enables on the router
Disable DIA cloud service “GBVD” or “gbvd” DIA cloud service disables on the router
3-37
Currently, there are three the main SMS settings: 1. Short Message Control Gateway. 2. Short Message Controlling PLC.
3. Control List of Event Management. Setting interface as follows:
_3
3-38
Description Default
ID
The maximum allow the 10 phone numbers N/A
Name
Set up a name for phone number, The name shall be composed of
letters, numbers and underline, starting with a letter or number. The N/A
maximum string length is 32 bytes.
Telephone Number
Add A
Set up a telephone number which can receive the alarm message. N/A
Telephone
Number Enabled
Set up the permission to enable or disable Yes
_3
Short Message Reply
When the router receives the SMS commands, the router will response
a confirmed message. Yes
Email
Set up an Email address to receive the alarm message. This setting
work with The Event management. N/A
Edit
Edit the existing event N/A
Delete
Delete the existing event N/A
Export The List
Export the event of SMS Fixed_sms_control_list.cfg
Import A List
Import the event of SMS to the router N/A
3.4.13 Event Management

This page is used for setting up 3 types of events, Communication Verification, Alarm Event and SMS Queries Event.
 Communication Verification: when this option is selected, the router will monitor and check if this channel is
trustable to ensure a safe communication between a router and a PLC via MODBUS TCP, MODBUS ASCII or
MODBUS RTU.
The operators that the expression supports are as below:
Operators Types Examples Description
3-39
+ Arithmetic operator A+100 Addition
- Arithmetic operator A-100 Subtraction
* Arithmetic operator A*100 Multiplication
/ Arithmetic operator A/100 Division
& Logic operator A&A+100 Logic AND
| Logic operator A|A+100 Logic OR

_3
() Bracket operator (A+100)*45 Change operation order
^ XOR operation A^100 XOR operation
 Alarm Event: uses can set up the Alarm Name, Alarm Description, Alarm Criteria, Target Receiver and Operation.
Click “Add” button to create new alarm event and click “Details” to edit the existing event and use ”Delete” button to delete
the selected event.
3-40
_3
Description Default
Alarm Name
Input an alarm name. The name shall be composed of numbers, English

N/A
letters, uppercase and lowercase. The maximum string length is 32 bytes.
Alarm Description
The alarm description shall be composed of numbers, English letters,

N/A
uppercase and lowercase. The maximum string length is 50 bytes.
Alarm Criteria
Setup the alarm trigger condition. The format of alarm variable is {$number
0-4095}, the alarm criteria can be a single alarm variable, or a formula of one or N/A
several alarm criteria. For example, the formula can be: {$2048}>100
Event Interval
The time interval of alarm sending 0
Repeat Times
The repeated times of alarm sending 0
Alarm Status
Enable or disable this alarm setting Enable
Alarm Content
Set up the information shown on the alarm contents. The content of the alarm
will be sent to the target when alarm criteria are met. The information order can N/A
be self-defined.
3-41
Description Default
 Time: the time when the alarm occurred

 Date: the date when the alarm occurred
 Name: the name of the occurred alarm
 Description: the description of the occurred alarm
For example: Register $2048 represents electrical voltage, the value of register
$2048 is 10, and the alarm content is set as: {Date} {Time} Voltage = {$2048},
then the alarm content received by users will be: 2016/06/01 10:00:00(currently
time) Voltage = 10. The maximum content length is 160 characters.
Target Receiver
_3 Set up the recipient. User can maintain the list by 【Control List Of Event
Management】in Privilege Management function. N/A
 SMS Queries Event: user can declar a query event, when the mobile number in the Control List of event send a
query message, system will reply the special content to the mobile number.
Description Default
3-42
Description Default
Query Name
Input an query name. The name shall be composed of numbers, English

letters, and underline. The maximum string length is 9 characters. For
example, after you create a query event name query1, you can send a N/A
message with content #MSG#query1 to device SIM card number, then it will
reply you the content you setup in the event.
Query Description
The query description shall be composed of numbers, English letters,

N/A
uppercase and lowercase. The maximum string length is 50 bytes.
_3
Query Content
Set up the information shown on the alarm contents. The content of the alarm
will be sent to the target when alarm criteria are met. The information order can
be self-defined.
 Time: the time when the alarm occurred
 Date: the date when the alarm occurred
 Name: the name of the occurred alarm N/A
 Description: the description of the occurred alarm
For example: Register $2048 represents electrical voltage, the value of register
$2048 is 10, and the alarm content is set as: {Date} {Time} Voltage = {$2048},
then the query content received by users will be: 2016/06/01 10:00:00(currently
time) Voltage = 10. The maximum content length is 95 characters.
Target Receiver
Set up the recipient. User can maintain the list by 【Control List Of Event
Management】in Privilege Management function. System only response the query N/A
from receiver list.
Notice
{} is a special system symbol, which is used to reference system variables or system
registers, like ${Time}, ${Date} or ${Number 0 - 4095}. Please use it with caution.
3-43
3.4.14 Register Management

This page is used for setting up the rules of register data upload to Cloud. Click “Add” to set a new rule. Click ”Edit” to
modify the existing rule. Click “Delete” to delete the existing rule.
The address segment 2048~4095 can be self-defined. The Start address, Length, Uploaded to Cloud or not and keep
history or not can be set up.. After clicking “Add”, the following page will show up.
_3
Description Default
Register Start Address
This rule will effect from which register address. The allowable range is
N/A
2048~4095. Start with $.
Length
How many register will be effect by this rule. Input range: 1-2048. N/A
Uploaded To Cloud
Whether to upload the variable information to Cloud. Yes
Keep History Data
This function will keep or overwrite the history data when the register values
are uploaded to Cloud.
 Yes: The existed register values in the cloud WON’T be overwritten by the
No
new uploaded register values.
 No: The existed register values in the cloud CAN be overwritten by the
new uploaded register values.
Notice
When the values in the register changes, the results will be uploaded to cloud.
3-44
3.5 Cloud Service

In this page, user can assign the cloud account which will be used to connect to DIACloud by device. Input the user name,
the password and click “Verify”. Refer to Chapter 4 for DIACloud account registration.
1. Login with your DIACloud account then click the “Verify” button to authenticate with DIACloud server.
_3
2. After authentication successfully, the cloud configurations will show up then the user can modify the secure tunnel
and device name.
3. The user also can set IP address manually.
4. Click the "Bind" button, the DX router will bind with DIACloud server and established a secure tunnel between
DIACloud server and the DX router. Meanwhile a new IP will assigns to DX router from DIACloud server (assign from
the cloud HDCP server or a user specified).
3-45
5. Your browser will access to the DX router with new IP address automatically if DIACloud account binds with
DIACloud server successfully. Please make sure a PC and DX router are in the same subnet; otherwise PC will not
be able to access to the DX router.
_3
6. If the network is in the poor condition, The binding proccess could be successfully but the Service Status is shown
“Disable”.
7. In this situation, the browser will access with 192.168.1.1 and the service status will be “Disable”. You can re-enable
the service status to rebuild the secure tunnel again in cloud configurations.
3-46
8. When the service status is shown “Enable”, that means the DIACloud service is actived on DX-2100RW-WW. The
user also can get the related information in cloud platform.
_3
9. Click the “Unbind” button, DX-2100RW-WW will remove the registered account in DIACloud.
Description Default
User Name
Set up the name for the DIACloud account. N/A
Password
Set up the password for the account. N/A
Verify
Check if the username and the password are matched. N/A
Secure Tunnel
Select the device under the account to join in a certain secure tunnel network
group. For secure tunnel related settings, go to Default
http://www.DIACloudsolutions.com/
Device Name
Set up the name for the device N/A
Secure Tunnel DHCP
When secure tunnel DHCP server is available, and the IP address is allocated
by the DHCP server in secure tunnel network, the IP address of this device can N/A
be found in the cloud portal.
Get IP From Cloud
When selecting “Yes”, IP address can be obtained by the cloud. When

Yes
selecting “No”, the IP address can be manually set.
Cloud IP Range
Display the Cloud IP Range. The Cloud IP Range is depended on the secure
N/A
tunnel setting. For the secure tunnel setting, please refer to 5.2.5 Tunnel
3-47
Description Default
Network.
Cloud Netmask
Display the Cloud Netmask. The Cloud Netmask is depended on the secure
tunnel setting. For the secure tunnel setting, please refer to 5.2.5 Tunnel N/A
Network.
Device IP
User can assign an IP address manually; remember that IP address should be

the same subnet as the secure tunnel setting. For the secure tunnel setting, N/A
_3 please refer to 5.2.5 Tunnel Network.
Notice
 Users can log-in to http://www.DIACloudSolutions.com/ and register for a
DIACloud account.
 In rare case, you can’t access the web because the computer did not refresh the IP
and DNS after the activation, please re-plug the cable to resolve the issue.
3.6 SD Card Quick Configuration

DX-2100RW provides the multiple quick configurations via SD Card.
 Upgrade the device firmware
 Import the device configuration
 Active the device with the DIACloud account.
The SD Card quick configurations will triggers by the following file is created in the SD card after the DX-2100RW reboots:
 The upgrade-package file ’DX2100_UpgradeImage_NorFlash_xxxx_xxxx.bin’
 The device configuration files ‘backup.cfg’. (Please refer 3.4.8 Backup & Restore)
 The cloud configuration file ‘Provision.bin’ (Please refer to the following steps).
1. Go to the DIACloud platform (DIACloudSolutions.com).
2. Log in the DIACloud webpage and click “SECURE TUNNELS”
3. Click to select the Network which you’d like to use and then click the to see and check the details.
4. Click the to download the generated Provision.bin to the local computer.
3-48
5. Copy Provision.bin file to SD card.
Power off the device and then insert the SD card into the device (SD card slot below the SIM card slot, on the right side of
the device). Turn on the device and it will automatically bind. Check the SD card status indicator to see if the binding is
_3
successful.
The following beep codes are for SD Card Quick Configurations, its definition that the various combinations of the
configuration file exist on SD card. (× – fail, √ - success or not this operation)
Beep Code Upgrade.bin backup.cfg Provision.bin
1 long × √ √
1 long, 1 short √ × √
1 long, 2 short × × √
1 long, 3 short √ √ ×
1 long, 4 short × √ ×
1 long, 5 short √ × ×
1 long, 6 short × × ×
None √ √ √
Notice
 Name rule for BIN file: Provision.bin
 Please do not change the file name of firmware upgrade-package.
 Please do not create the two different upgrade-package file in SD Card. In order to
avoid the upgrading process fails.
 At least a 10-minute interval of separation between the two SD Card Quick

Configuration
3-49
4
Chapter 4 DIACom
Table of Contents
4.1 Introduction to DIACom ............................................................................. 4-2
4.1.1 Select a Suitable Firmware Version ........................................................... 4-2
4.1.2 DIACom Installation ................................................................................ 4-3
4.1.3 DIACloud Account Registration ................................................................. 4-3
4.1.4 Bind DIACloud Account............................................................................ 4-5
4.1.5 Setup a Secure Tunnel ............................................................................ 4-6
4.1.6 Remote Control and Monitoring via DIACom ............................................... 4-9
4-1
4.1 Introduction to DIACom

DIACom allows you to create a secure tunnel between your PC and router, making it possible for
your PC to communicate remotely with the devices connected to the router. Thus engineers can
control, monitor, operate, program and diagnose the device remotely whenever there is internet
connectivity.
_4
Notice
 DIACloud provides you with cloud services, including the connected device
management, secure tunnel network creation, data upload/download, and
directional transmission.
 If you need to configure or monitor your controller, you will need to install
programmable logic controller software, for example WPLSoft/ISPSoft for Delta
PLC.
4.1.1 Select a Suitable Firmware Version

Find a suitable DIACom firmware version according to the following table below for your router.
Corresponding Table:
Device Model Firmware Version

DX-2100 V1.3.0.1 or above
4-2
C ha pt er 4 I ntr o duc t i on t o DI A Com
4.1.2 DIACom Installation

Obtain the DIACom firmware package from the official website or from our sales representative.
Administrator privileges are required to run and install the package. Uninstall older versions of
DIACom before downloading new DIACom firmware package.
Notice
DIACom supports Windows XP, Windows 7 (32-bit and 64-bit) and Windows 8
(32-bit and 64-bit).
4.1.3 DIACloud Account Registration

1. Before registration, you should have a valid email account. (DIACloud uses your email
address as your account.)
2. Open the DIACloud web page (http://www.DIACloudSolutions.com). The system will redirect
you to the registration page:
4_
Notice
*Click at the upper right corner to change the interface language to
English.
3. Input your email address, password and other relevant information on the registration page.
Select “I Agree” and click “CREATE AN ACCOUNT”.
4-3
_4
4. After clicking “CREATE AN ACCOUNT”, a congratulation page will be prompted and an

activation email will be sent to the email address you have used as your DIACloud account.
5. You will find an activation email sent from [email protected] in your email box.
Open the email, click “here” link in the email and complete DIACloud account activation
operation. And you will be redirected to the DIACloud login page. Input your account and
password to log in to the DIACloud.
4-4
4_
4.1.4 Bind DIACloud Account

Follow the steps blow to bind your DIACloud Account.
1. Local Network Setups: Please refer to Chapter 2.1 to 2.1.3 Web-based GUI Configuration for
more information.
2. Bind DIACloud Account: Please refer to Chapter 3.5 Cloud Service for more information.
Notice
 Secure Tunnel: Secure tunnel is a virtual network. Users can set up several
groups of secure tunnel for easier device management.
 Device Name: the serial number + “_” + “Mac address” of the device is the device
name by default.
 Get IP From Cloud:
 When selecting “Yes”: The system will assign an IP address for the device
according to the Secure Tunnel settings and the availability of the IP
addresses. Take note of the assigned IP address, it will be used when
logging to the DIACloud.
 When selecting “No”: The IP address can be manually set.
The IP address of the DX-2100 Series and the WAN of your connected PC should be in
4-5
different network segments.
4.1.5 Setup a Secure Tunnel

Make sure there is internet connectivity, before creating a secure tunnel between your local PC
and router via the DIACom. Http Proxy and Port Agent are configurable in DIACom network
setting function, you can set it to avoid the possible limitation.
1. Run DIACom and log in with your router’s cloud account.
_4
2. Click to go into network setting page if need be.
4-6
4_
 Http proxy: Please fills in the proxy server address, port, username and password if
the LAN needs to set the proxy to access the Internet.
Notice
 DIACOM will automatically determine whether the port agent
needs to enable.
 Make sure that the external network port 80 and port 443 is
opened and can access any network domains and IP addresses
3. Add a virtual IP address and subnet mask for your computer. You can use DHCP to obtain an
IP address automatically or manually set the IP address. Be sure to set the IP address in the
same network segment as your router’s, for example, your router IP is 192.168.200.6, and
the computer’s virtual IP should be set to
4-7
192.168.200.xxx.
_4
4. Select the same group of the secure tunnel, same as your router’s group (refer to 3.5 Cloud
Service for details) and specify an IP address with the same network segment of your router
IP and the virtual IP of the computer (); or select “Obtain an IP address automatically”.
Notice
Secure Tunnel is a virtual network. Users can create various secure tunnel groups and
design different devices to the appointed groups for easier group management. When
your DIACloud account is successfully registered, the system will assign a new secure
tunnel group named default for your router.
5. Click “Create secure tunnel” and the following image will show up, indicating the creation is
successful. Whenever there is internet connectivity, you can use programmable logic
controller software to control, monitor, operate, and program your PLC and open your router’s
webpage (simply input your router’s IP in the search bar of a browser) to configure your
router remotely.
6. Click “Disconnect” or exit from the DIACom to close the secure tunnel.
4-8
4_
4.1.6 Remote Control and Monitoring via DIACom
4.1.6.1 Via a LAN Port
If your router is connected to remote devices via a LAN port, you can use the
configuring/monitoring software on your local computer to configure and monitor after opening a
virtual tunnel. Some program would require the IP addresses of your remote device. Simply input
the required information in the configuring/monitoring software and then you can configure and
monitor the connected device remotely.
4.1.6.2 Via a RS232/RS485 Port
After opening a virtual tunnel, you will need to follow the setups below before using WPLSoft or
other configuring/monitoring software on your local computer to configure and monitor the
connected device remotely.
1. Open a browser and input the IP address of the router which is connected to your remote
device on the search bar and then log in.
2. Go to the System setup page, select the setup option RS232 or RS485 and input the required
information to set up. Make sure the parameters are consistent with your remote device.
 Working Mode：Transparent mode
 Parameters of COM (Baud Rate, Data Bits, Stop Bits, Parity Bits, Flow Control)
4-9
3. Go back to the DIACom and input the IP address of the router which is connected to your
remote device. Click “Create COM port” to create a virtual tunnel. Once the creation is done,
the virtual IP address will show up on the same page. Users can use this IP address to
connect to your local computer and then you can use the configuring/monitoring software to
configure and monitor the connected device remotely. Click “Delete COM port” to close the
virtual tunnel.
_4
Notice
If the PLC is Siemens S7-200, you can select the “PPI” in the DIACom to support PPI
protocol.
4. Open the WPLSoft to check if the COM parameters are consistent with the settings on your
router. When these parameters are consistent, you can use the WPLSoft to configure/monitor
your device remotely.
4-10
4_
4-11
5
Chapter 5 DIACloud
Table of Contents
5.1 Introduction to DIACloud .............................................................................. 5-2
5.1.1 Select a Suitable Firmware Version .............................................................. 5-2
5.2 Instructions for DIACloud.............................................................................. 5-2

5.2.1 Register and Login ..................................................................................... 5-2
5.2.2 Home ....................................................................................................... 5-4
5.2.3 Devices .................................................................................................... 5-6
5.2.4 Alarm ..................................................................................................... 5-15
5.2.5 Secure Tunnels ........................................................................................ 5-16
5.2.6 Sub Users ............................................................................................... 5-18
5.2.7 Logs ....................................................................................................... 5-21
5.2.8 Orders .................................................................................................... 5-21
5.2.9 Profile .................................................................................................... 5-22
5-1
5.1 Introduction to DIACloud

DIACloud Web is a web portal of DIACloud cloud platform. Users can check the status of connected industrial device
through DIACloud Web, browse data that has been collected, receive warnings, notices and other messages that are sent
by cloud platform, create and manage sub-account and virtual safety network and check login and interface logging, to
improve the manageability of devices, optimize the device performance and efficiency, save the operation cost and
enhance the service quality.
5.1.1 Select a Suitable Firmware Version

Please confirm that your Firmware version of router meets the requirements in the following table before use:

5.2 Instructions for DIACloud

5.2.1 Register and Login
1. Open the DIACloud web page (http://www.DIACloudSolutions.com). If you have got an account, input your account
and password in the following page to log in; if you have not got an account, click “CREAT AN COUNT” to register.
Then the system will redirect you to the registration page:
_5
2. Input your email address, password and other relevant information on the registration page. Select “I Agree” and
click “CREATE AN ACCOUNT”. Pls insure your region information is correct, otherwise it maybe cause problem in
payment when you extend your service.
Notice
Click at the upper right corner to change the interface language to English
or Chinese.
5-2
CH 5 In tr o d uc t i o n t o I O T DI A C lo u d
_5
3. After clicking “CREATE AN ACCOUNT”, a congratulation page will be prompted and an activation email will be sent
to the email address you have used as your DIACloud account.
4. You will find an activation email sent from [email protected] in your email box. Open the email,
click “here” link in the email and complete DIACloud account activation operation. And you will be redirected to the
DIACloud login page. Input your account and password to log in to the DIACloud.
5-3
_5
5. Open the DIACloud web page (http://www.DIACloudSolutions.com). Log in using your account that you have
registered.
5.2.2 Home
The Home Page will show up after login.
5-4
Item Description
Menu User can switch to corresponding function through menu on the left.
Devices Total The number of total devices
Devices is Online The number of total online devices
Alarms in 24 Hours The number of alarms in Recently 24 hours
Virtual Networks is
It will show the number of Secure Tunnel groups under the account.
Usable
Switching among the Chinese and English
Show the service package you selected, user can add packeage to shopping cart
through Devices function and Profile function.
Show the alarm message(s) in latest 7 days
Show the profile or logout
Online payment process as below:
1. After click , it will show the detail information in shopping cart.

_5
2. Click to generate an order. DIACloud provides the follow types of invoices.

 No need For Invoice
 Electric Invoice
 Paper Invoice
5-5
3. Click , we accept PayPal payments and process credit cards on your order forms.
_5
5.2.3 Devices
It will switch to page of device list after clicking “Devices” in navigation bar.
Item Description
You can filter the device base on you input the key word of the device name.
Filter base on tunnel group, show all devices or only show the devices under user
specified tunnel group.
5-6
Show the list of device。The information include device’s name, device’s SN, device’s
type, storage usage, data usage, the time of binding device.
Devices List
 Green represents that the device is on-line
 Gray represents the device is off-line.
 : Represents that all device is displayed currently, and you can switch to
on-line device list after clicking this icon.
 : Represents that on-line device is displayed currently, and you can switch
to list of on-line device after clicking this icon.
Show relevant position information of device.
Refresh pages
Show detail information of the device
 : It will show relevant position information of device after you click “ ” , which is shown as follows:
_5
It will show the device name and SN of the device after clicking position icon in the map. When there is large number of
device of user, it will switch to corresponding device when user clicks blue arrows at the edge of the map.
 : More detail information about device will be shown after clicking under the “Operation” at the
most right side of device list:

1. OVERVIEW: The page will show the basic information of the device and latest alarm message.
5-7
_5
Item Description
It represents that device is on-line if background color is blue, and device is off-line if it
is gray.
 : Show device names; it can switch device after clicking the

drop down arrow.
Operation zone of device

 : Realize refresh of device data on operation page.
 : Delete binding relationship between device and the account. Device
needs to be un-bund after clicking this button, and user can recover the device
by rebinding.
 : Close the operation page.
Operation is divided into 4 pages:
 Overview
Page switching
 Registers
 Package
 More
Different buttons are used to switch different pagers.
Basic information is shown in Overview page.
 IP Address: it means the IP that has been bound for device;
 Tunnel Network: it means virtual network that has been bound to device;
Basic information zone  Boot Time: it means the boot time of device;
 RS232 Mode: work modes of RS232, including transparent transmission mode
and slave station mode;
 RS485 Mode: work modes of RS 485, including transparent transmission
5-8
mode, slave station mode and master station mode;

 Modbus TCP: work modes of Modbus TCP, including Modbus TCP Server，
Modbus TCP Client and Closed
 RSSI: it means signal strength of device which contains 5 bars; the larger the
number of green bars is, the stronger the signal strength is;
The latest five Alarm of the current device. “ ” represents the state that the email is
being sent;
Latest Alarms
 Green represents that the email has been sent successfully
 Red represents failure of sending.
2. REGISTER: The page will show and manage register value that uploaded from DX production.
_5
Item Description
The filtering function displays a list of keywords that match specific register.
Click and add the corresponding register and register value, then click “SAVE”
button. DIACloud server will send the corresponding data to the device.
“<” Pervious page，“>” Next page，“1/205” show the current page of register table and
the total amount of register table page.
Register Table Show the register table, registers show a maximum of 10 posts per page.
Show the register name, when you do not make an alias configuration in the register,
Register Name the register number is displayed; an alias configuration in the register will be displayed
after you configure the alias
Register Value Show the current register value and data transfer time.
5-9
You can view the current register of historical data or delete the current register; it can
also be configured to register.
P.S. If this register is not set to remeber history (device configuration page), the menu
does not appear [History] after clicking icon.
The History and Config options will be shown after clicking
_5
Item Description
History It represents trend chart of historical data
Delete User can delete the all data of this register
Config User can customize name of register and content returned.
 History : The following figure will be shown after clicking “History”:
5-10
Item Description
Set the Date Stare and query the historical data for
Date Start
a specific time
Set the Date End and query the historical data for a specific
Date End
time
_5
Register Value History Diagram The latest trend chart of value of register;
Time Axis User can change time scope of historical data by sliding “ ”.
 Config : The following information will be shown after clicking “Config”
Item Description
The user can set the name of the register to be displayed in the
Alias Name
"Alias Name"
5 - 11
function(val) is used for convert the register value, and the

function(val)
grammar of function-supported JavaScript is similar.
There are two examples for “function (val)”.

Example 1 : If you want to show the wind speed as 10m/s. (Data +unit, such as: speed 10m/s).
1. Input the code: return val+“m/s” in function (val){…} as the following picture.
_5 2. Save the configuration.

Example 2: If you want to convert the register value to the text such as the register value of 1 shows the text as ‘NO’;
register value of 2 shows the text as ‘OFF’
1. Input the code in function (val) {…} as the following picture.
2. Save the configuration.
5-12
SERVICES: This page shows the Device Data Usage, Device Storage Usage and Account Storage Usage for users.
Item Description _5
 Device Data Usage: Show device traffic usage this month and
monthly capacity.
Data  ：User can purchase more traffic package for this device if
need.
 : Show the Data Usage History in past 12 months.
 Device Storage Usage: Show device storage usage till now and
total capacity
Storage  Account Storage Usage: Show account and device storage usage
till now and total capacity，account storage will share to all device
under this account, device storage only use for itself.
5-13
1. After Click the , it will show the traffic package select page. User can add a package to cart or pay it direct.
2. After Click the , it will show the Data Usage History in past 12 months.
_5
Notice
Traffic package is tie to device and computed separately for each device, user can
purchase more for each device
Initial storage package is tie to device, after the device’s storage is spent all, it wil
charge to account storage. User can purchase more for account only. This means
the account storage will share to all devices under this account.
5-14
MORE: This page will show the Serial Number, Software Version, Hardware Version, and IMEI for users.
Item Description
Serial Number Serial number of device

_5
Software Version Version information of software
Hardware Version Version information of hardware
IMEI Device Identity which is the only identification number of telephone.
5.2.4 Alarm
Click the Alarm in the left menu. The warning information in the latest 7 days will be shown in this page. The warning
information includes name and serial number of device, content of warning, status of email that is being sent (green“ ”
represents that the email has been sent successfully, and red represents fail.), time of warning and content record of
warning.
5-15
5.2.5 Secure Tunnels

Secure Tunnel is an important concept in DIACloud. Its objective is to realize virtual Switch across Internet; when device is
bound to this network, it will be equivalent to adding device with one LAN port; when PC operates DIACom and creates a
virtual network, PC and the device will be under the same switch at this time. It is shown as follows:換照片
_5
5-16
Users can manager the tunnel network in this page. Interface is shown as follows:
tem Description
Search the existed tunnel network
Tunnel network List List all tunnel network under this account
Add a new tunnel network
Refresh the tunnel network list
Edit the tunnel network
_5
Item Description
The detail information of tunnel network:

 Network Name: User can enter a name of tunnel network.
 DHCP Option: Automatic IP Address Assignment by DIACloud.
Tunnel Network Information  DHCP IP Start: it represents the beginning IP in automatic IP
distribution address pool of DIACloud
 DHCP IP End: it represents the ending IP in automatic IP distribution
address pool of DIACloud.
5-17
If the DHCP of thes tunnel network is enabled, click will export

configurations include DIACloud Servier /account /Tunnel networks info to a
file (default file name Provision_vlnname_date_time.bin).
Note: Detail configuration, please refer to 3.2 SD Card Quick Installation.
Delete the current tunnel network
Close the current operation window.
Save the configuration of tunnel network
5.2.6 Sub Users

All accounts that are registered through register page of DIACloud (http://www.DIACloudSolutionscom/#/signup) are main
accounts. Every main account can create sub-account, and users can realize power separation and grouping
management of device by conducting authorization for virtual network and DIACom by sub-account. Use can conduct
addition and operation for sub-account through the “Sub Users” page.
_5
Item Description
Search the sub users.
Sub Users List Show the list of all sub users in main account.
Add a sub user.
Refresh the list of sub users.
Modify the access control of the tunnel network.
 : User can modify the access control of the tunnel network.
5-18
Item Description
 Login to DIACom: Allow the sub user to access the DIACom if the
option is enabled.
Sub Users Information _5
 Tunnel Network: Allow the sub user to access the Tunnel Network if
the option of Tunnel Network is checked.
Delete a sub user.
Close the current operation window.
 : User can add sub users after clicking the “+” in the page, and. The following interface will be shown after
clicking the “+” in the page:
5-19
1. Fill in corresponding account information and conduct authorization for it.
2. The system will send an activation email which is attached with random login password to email box of sub user.
The account status is “Un-activated” now.
3. Goto the mailbox, click the hyperlink to complete account activation operation, then sub user can login DIACloud
with new account.
4. The page will link to the following page after clicking the activation link in the email:
_5
5. When user login to DIACloud with main account and the sub user that we created has been activated.
5-20
5.2.7 Logs
This page will show the web operation information of some users. It includes: login IP, setup of register, API interface call
of DIACloud and other information.
_5
5.2.8 Orders
In this page, user can check his all orders. Continue to pay for the unpaid orders or cancel the unpaid orders.
5-21
Item Description
View the order detail information
Pay for the unpaid order
Cancel the order, order will remove from the list.
 Order detail
 Payment Method: Currently, we only support PayPal payment for the world wide user.
_5
5.2.9 Profile
In this page, QR Code of user, Package info, password management and other information will be shown.
Item Description
You can get the part information of user by using DIACloud APP and
QR Code
scanning QR Code.
5-22
Account The current account information.
 Show account storage usage till now
Packeage info  user can purchase more storage package for this account if
need
Notice: account storage will share to all device under this account.
Change the password of DIACloud user account.
Change Password Note: parts of old users use password in 6 digits; the new password has been
increased to 8 digits to improve safety of their accounts.
After Click the , it will show the storage package select page.
_5
Change Password page as below
5-23
6
Chapter 6 DIACloud APP
Table of Contents
6.1 Introduction to DIACloud APP .................................................................... 6-2
6.1.1 Devices Supported .................................................................................. 6-2
6.1.2 DIACloud APP Installation ........................................................................ 6-2
6.2 DIACloud APP Function .............................................................................. 6-3

6.2.1 DIACloud APP Login ................................................................................ 6-3
6.2.2 Device List ............................................................................................. 6-4
6.2.3 Device Details ........................................................................................ 6-5
6.2.4 Registers View ....................................................................................... 6-6
6.2.5 Alarm List .............................................................................................. 6-7
6-1
6.1 Introduction to DIACloud APP

DIACloud APP is the client software of DIACloud cloud platform running on mobile devices.
The APP supports both iOS and Android mobile system, it enables users to view the field
data collected, the locations of the field devices, and the alarms/notifications pushed by the
industrial IOT cloud platform, so that keep users posted anytime and anywhere, and
therefore improve the manageability of devices, optimize the device performance and
efficiency, save the operation cost and enhance the service quality.
_6
6.1.1 Devices Supported
The APP can support the devices below:
6.1.2 DIACloud APP Installation

The DIACloud APP is available on Google Play and Apple APP Store.
Mobile Device OS Version
Android 4.4.0 or above
iPhone 6.2.0 or above
6-2
C ha pt er 6 I ntr o duc t i on t o DI A C lo u d A P P
6.2 DIACloud APP Function

6.2.1 DIACloud APP Login
Enter the DIACloud account and password, then click the “Sign in” button to login the APP. Click
the “Sign up” to register an account if you don’t have one.
6_
Item Description
Scan QR code, the QR code is generated by DIACloud Web portal,

which carries the user name and password information. By scanning
the QR code, user won’t need to input user name. By default, the
APP will connect the default DIACloud server in the cloud, if the
APP is to connect other servers, QR code should be scanned to
provision the APP.
DIACloud account, Email format
The password of DIACloud account, click to see what are you

input
Auto Login Save the password and login the APP automatically
Login Login to App
Sign up Create a new DIACloud account
Forget Reset the password if you forget it.
Switch the language.
6-3
6.2.2 Device List

Device list will be shown after user login the APP.
Device tab and alarm tab will be shown in the APP. In the device tab, the device information will
be shown, include the value of registers of the remote device. And the value of the register can be
changed in the APP as well. In the alarm tab, users can read the alarm messages.
Item Description
_6 Logoff or exit App
Search Search device base on key word
 Click “ALL” to show all device

All/Online  Click “Online” only show online device. Digit at the back is the
all/online device count.
Display device online/offline status, device name, device serial
Device list
number. Click it will go into device detail page
Switch to device list page
Switch to alarm list page.
6-4
6.2.3 Device Details

Device details will be shown by selecting a device in the device list.
Item Description
Type Type of the device
Time The time when the device is online.

6_
IP IP Address of the device
Account DIACloud account activating the device.
The working mode of RS485 and RS232..

 RS232: Transparent transmission mode or Slave mode
Mode
 RS485: Transparent transmission mode / Slave mode /
Master mode
Showing the location of the device on the map

Map
P.S. DX-2300 Series doesn’t support this function.
6-5
6.2.4 Registers View

By selecting the “Registers” table, the name, value and last change time of the register will be
shown. The information can be refreshed by pulling down the APP. When there are a lot of
registers, more registers can be shown by pulling up the App.
Click icon to edit the register value.

_6
Click “ok” button, the register value will be pushed to the device.
6-6
6.2.5 Alarm List

Alarm criteria can be set on the device configuration web page. When the alarm criteria are met,
the device will send out alarm messages. User can click the “Alarm” tab to read the alarm
messages. When there are new alarm messages, the number of the unread messages will be
shown on the icon .
 Alarm tab will be shown by clicking icon , the alarm messages in Red are unread
messages. Digit in parentheses is the number of alarm messages.
 Pull down the APP to refresh the alarm list.
6_
6-7

Delta Ia-Ies DX-2100RW-WW Um en 20160914

Uploaded by

Copyright:

Available Formats

Delta Ia-Ies DX-2100RW-WW Um en 20160914

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Delta Ia-Ies DX-2100RW-WW Um en 20160914

Uploaded by

Copyright:

Available Formats

Industrial Automation Headquarters

Delta Electronics, Inc.

Delta Greentech (China) Co., Ltd.

Delta Electronics (Japan), Inc.

Delta Electronics (Korea), Inc.

DX-2100 Series Industrial

Delta Electronics Int’l (S) Pte Ltd.

Delta Electronics (India) Pvt. Ltd.

DIACloud Cloud Platform

Delta Greentech (Brasil) S.A.

Router User Manual

1.1 Product Overview .......................................................................................... 1-3

Chapter 2 User Interface

2.1 Web-based GUI Configuration ............................................................................................. 2-2

3.1 Status ......................................................................................................... 3-3

4.1 Introduction to DIACom ................................................................................. 4-2

5.1 Introduction to DIACloud..................................................................................................... 5-2

Chapter 6 DIACloud APP

6.1 Introduction to DIACloud APP ......................................................................... 6-2

1.2 Package Checklist ...................................................................................... 1-7

About This Manual

FCC Interference Statement

---Reorient or relocate the receiving antenna.

---Increase the separation between the equipment and receiver.

---Consult the dealer or an experienced radio/TV technician for help.

EN 301 511 V9.0.2 (2003-3)

Disclaimers and Limitation of Liabilities

claim or in connection with the use of or access to the Software or Services.

1.1 Product Overview

maintenance for users.

1.1.1 Network Design

 HSPA+/HSUPA/HSDPA/UMTS: 800/850/900/1700(AWS)/1900/2100 MHz

 GSM/GPRS/EDGE: 850/900/1800/1900 MHz

 Authentication Protocols, CHAP and PAP

 Access Point Name (APN) gateway

 Auto Dial-up Connection

 Built-in a Watchdog Timer to Ensure System Stability

 Built-in RTC and Support NTP Server

 Firmware Upgrade Locally and Remotely

DHCP Server, Dynamic DNS, Static Routes, Demilitarized Zone (DMZ)

 Modbus TCP, Modbus ASCII and Modbus RTU protocol

 Scheduled Task Management

 Servers for Local Log and Remote Log

 Configurations Backup, Export and Import

 Network Flow Monitoring 1_

1.1.3 Front Panel Ports and LEDs

1.1.4 Top Panel

1.1.5 Bottom Panel

 Reset can only be done when the device is running properly.

1.2 Package Checklist

 DX-2100RW-WW Industrial 3G Cloud Router x 1

 Quick Installation Guide x 1

 10/100Mbps Ethernet Cable (100cm) x1

 SMA Antenna (300cm) x 1

2.1 Web-based GUI Configuration

2.1.1 System Connection 換照片

2.1.2 Default IP Address/Account/Password

2.1.3 Local Network Setups

 Obtain an IP address automatically by using the router as a DHCP server.