Gas Insulated Switchgear: Your Partner in Energy Solutions
Gas Insulated Switchgear: Your Partner in Energy Solutions
Gas Insulated Switchgear: Your Partner in Energy Solutions
Main features
The GT01 type SF6 Gas Insulated Switchgear (GIS) is a three-phase enclosed compact design, including the following main equipment: puffer assisted self-blast circuit breaker with spring drive, combined disconnector and earthing switch with motor drive, high speed earthing switch with motor charged spring drive, current and voltage transformers and surge arrester. The enclosure is made of corrosionresistant aluminium alloy in welded or in casted construction. The current carrying tubes are aluminium tubes silver plated on the connection surfaces and tted into silvered contacts. For supporting the current carrying tubes and for terminating the independent gas compartments, epoxy resin insulators are used. Sealing is ensured by well-proven special O ring system, which gives an excellent gas tightness in case of indoor and outdoor installation as well.
Ratings
Rated voltage: Rated lightning impulse withstand voltage: Rated power frequency withstand voltage: Rated frequency: Rated current (max.): Rated short time withstand current: Rated gas pressure (abs.): Applied standard: Other data on request.
72.5145 kV 325650 kV 140275 kV 50 Hz 3150 A (at 40 C ambiant temp.) 40 kA, 3 sec 0.8 MPa (CB), 0.6 MPa (GIS) IEC
Contact
CG Electric Systems Hungary Zrt Registered Ofce Mriassy utca 7, Floor IV 1095 Budapest, Hungary T + 36 1 483 6611 F + 36 1 483 6613 CG Power Systems Belgium NV Antwerpsesteenweg 167 B-2800 Mechelen, Belgium T + 32 15 283 333 F + 32 15 283 300
Contact
[email protected] - www.cgglobal.com