AMB4519R3v06

2MXX-790-960/1710-2200-33/33-16i/18.5i-M/M-R
EasyRET Hybrid Quad-beam Antenna with 4 Integrated RCUs - 2.0m

Antenna Specifications
Electrical Properties
790 - 960 1710 - 2200
Frequency range (MHz)
790 - 862 824 - 894 880 - 960 1710 - 1990 1920 - 2200
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable , each band separately
at mid Tilt 14.8 15.2 15.7 18.2 19.2
Gain (dBi)
over all Tilts 14.7 ±0.8 15.1 ±0.8 15.5 ±0.8 18.0 ±0.8 19.0 ±0.6
Side lobe suppression for first
> 16 > 17 > 17 > 17 > 18
side lobe above main beam (dB)
Horizontal 3dB beam width (°) 38 ±3 37 ±3 35 ±3 30 ±3 29 ±1.5
Vertical 3dB beam width (°) 16.0 ±2.4 15.5 ±2.6 14.2 ±2.5 7.2 ±0.5 6.5 ±0.5
VSWR < 1.5
Horizontal beam centers (°) ± 27 ± 26 ± 24 ± 30 ± 29
Cross polar isolation (dB) Same beam: ≥ 25 Same beam: ≥ 25
Beam to beam isolation(dB) ≥ 18 ≥ 18
Interband isolation (dB) ≥ 28
Front to back ratio, ±30°(dB) > 25 > 30
Cross polar ratio at boresight (dB) > 18 > 17 > 18
Max. power per input (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Total power (W) 960 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

2. Electrical datasheet in XML format is available.
144
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2090 x 590 x 169

(725)
Packing dimensions (H x W x D) (mm) 2350 x 705 x 275
Antenna weight (kg) 38.5
Clamps weight (kg) 5.8 (2 units)
Antenna packing weight (kg) 55.0 (Included clamps)
Mast diameter supported (mm) 50 - 115
2090
1267

Radome material Fiberglass

Radome colour Light grey
Operational temperature (℃) -40 .. +65
Frontal: 1330 (at 150 km/h)
Wind load (N) Lateral: 190 (at 150 km/h)
Maximum: 1330 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
98

Connector 8 x 4.3-10 Female

Connector position Bottom

Accessories
Item Model Description Weight Units per antenna

ASMDT0F0 Mechanical downtilt: 0 - 12

Downtilt kit 3.1 kg 1 (Separate packing)
1 °

234
 AMB4519R3v06
2MXX-790-960/1710-2200-33/33-16i/18.5i-M/M-R
EasyRET Hybrid Quad-beam Antenna with 4 Integrated RCUs - 2.0m

Integrated RET Specifications

Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety)，ETSI EN 301 489, FCC Part15, ICES-003

Multi-beam
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Integrated RET S/N:

r1 r2 HWMxxx……r1

HWMxxx……b1

HWMxxx……b2
b1 b2
HWMxxx……r2

r - Red b - Blue

235
 AMB4519R3v06
2MXX-790-960/1710-2200-33/33-16i/18.5i-M/M-R
EasyRET Hybrid Quad-beam Antenna with 4 Integrated RCUs - 2.0m

Pattern sample for reference

790 - 960 MHz 790 - 960 MHz

(r2-30) (r1+30)

1710 - 2200 MHz 1710 - 2200 MHz

(b2-30) (b1+30)

236