QXLink 3 Installation Manual

© Vieworks. 2014 All rights reserved.

Under copyright laws, this manual should not be reproduced, in whole or in part, without the permission of
Vieworks.
 QXLink3 Installation Manual

Contents

1. Document Guide ............................................................................................................... 3

1.1 Symbols ....................................................................................................................................... 3

1.2 Notation ...................................................................................................................................... 3

2. Intended Use ..................................................................................................................... 4

3. Getting Started ................................................................................................................. 5

3.1 Prerequisite ................................................................................................................................ 5

3.2 Minimum Specifications .......................................................................................................... 5

4. Prgram Installation ........................................................................................................... 6

4.1 How to Install ............................................................................................................................ 6

5. QXLink Server Installation .............................................................................................. 9

5.1 How to Instlall ........................................................................................................................... 9

5.2 Setting File Sharing Environment ........................................................................................ 13

5.2.1. Windows 7 ..............................................................................................................................................................................................13

5.3 Setting Permissions for Shared Folders ............................................................................. 15

5.3.1. Windows 7 ..............................................................................................................................................................................................15

6. QXLink Viewer Installation ...........................................................................................19

6.1 How to Install .......................................................................................................................... 19

7. Running under Standard User Account .....................................................................23

7.1 Windows 7................................................................................................................................ 23

7.1.1. How to Set Access Permissions ....................................................................................................................................................23

8. Regulatory Information .................................................................................................26

8.1 FDA (Food and Drug Administration) ................................................................................ 26

9. Revision History ..............................................................................................................27

Rev.2.2 Page 2 of 27 RA14-12A-003

 QXLink3 Installation Manual

1. Document Guide

This installation manual explains about the installation and operation process of the QXLink 3 program
made by Vieworks. With this manual, you can install our program conveniently.

Target

This manual is intended for the engineers who install and maintain the QXLink 3 program. The engineer
can fully understand about the organization and installation way of QXLink 3 through this manual.

Contact Department

For any comments or inquiries regarding this document, contact to the department in Vieworks where
handles the manual as below.

Item Contens
Department Technical Support Division in Vieworks
E-mail [email protected]

1.1 Symbols

Before attempting to use Vieworks’ product or program, follow the safety instructions in this manual along
with the caution and information symbols. It is important for you to read and understand the contents of
this manual for operating the product safely.

Caution

This symbol is used to indicate a potentially hazardous situation which may cause death,
personal injury or substantial property damage if the instructions are ignored. Be sure to
understand the instructions of this symbol for the safe operation.

Information

This symbol is used to indicate references and complementary information. Users are
recommended to read the sentences with this notice carefully.

1.2 Notation

Bold Types

We applied bold font style to the words which indicated products terms, or the words and sentences which
are needed to transmit clear meaning to the customers. This helps you to easily distinguish the words from
other technical ones for explaining functions.

Rev.2.2 Page 3 of 27 RA14-12A-003

 QXLink3 Installation Manual

2. Intended Use

QXLink 3 is a device that provides one or more capabilities relating to the acceptance, transfer, display,
storage, and digital processing of medical images. The software components provide functions for
performing operations related to image manipulation, enhancement, or quantification.
This device is not intended for mammographic operations

The medical images are acquired from the following medical devices.
Modality Description
CR Computed Radiography
MR Magnetic Resonance
US Ultrasound
BI Biomagnetic imaging
ES Endoscopy
PT Positron emission tomography (PET)
XA X-ray Angiography
RTIMAGE Radiotherapy Image
DX Digital Radiography
IO Intra-oral Radiography
GM General Microscopy
XC External-camera Photography
OP Ophthalmic Photography
CT Computed Tomography
NM Nuclear Medicine
OT Other
DG Diaphanography
RG Radiographic Imaging (conventional film/screen)
TG Thermography
RF Radio Fluoroscopy
PX Panoramic X-ray
IVUS Intravascular Ultrasound
BMD Bone Densitometry (X-ray)

Rev.2.2 Page 4 of 27 RA14-12A-003

 QXLink3 Installation Manual

3. Getting Started

3.1 Prerequisite

QXLink 3 supports the following operating system.

Item Oprating System

 Home Premium 32bit
 Home Premium 64bit
 Professional 32bit
Microsoft Windows 7
 Professional 64bit
 Ultimate 32bit
 Ultimate 64bit
 Professional 32bit
 Professional 64bit
Microsoft Windows 8
 Ultimate 32bit
 Ultimate 64bit
 Professional 32bit
 Professional 64bit
Microsoft Windows 8.1
 Ultimate 32bit
 Ultimate 64bit

3.2 Minimum Specifications

The minimum specifications for operating QXLink Server and QXLink Viewer are as follows.

Item Specifications
CPU 1㎓ x86 or more than x64
RAM More than 1 GB
HDD More than 16 GB HDD

Rev.2.2 Page 5 of 27 RA14-12A-003

 QXLink3 Installation Manual

4. Prgram Installation

QXLink Prerequisite is a required program to operate QXLink server.

To install the QXLink Prerequisite program successfully in Windows 8 or Windows 8.1 OS

environment, you should install Prerequisite BN002 or the higher version.

4.1 How to Install

1 Open the QxLink Prerequisite installation file.

2 Click Install button.

 All packages should be installed with the administrator account.

 The program should be installed before installing QXLink Server.

Rev.2.2 Page 6 of 27 RA14-12A-003

 QXLink3 Installation Manual

3 Click Next button.

4 Click Install button.

Rev.2.2 Page 7 of 27 RA14-12A-003

 QXLink3 Installation Manual

5 Click Finish button.

6 Click Finish button and restart your computer.

Rev.2.2 Page 8 of 27 RA14-12A-003

 QXLink3 Installation Manual

5. QXLink Server Installation

5.1 How to Instlall

1 Open the QXLink Server installation file.

2 Click Install button.

3 Click Next button.

Rev.2.2 Page 9 of 27 RA14-12A-003

 QXLink3 Installation Manual

4 Click Install button.

5 Click Next button.

QXLink Server recognizes the operating system automatically while installing the program.

Rev.2.2 Page 10 of 27 RA14-12A-003

 QXLink3 Installation Manual

6 Click Install button.

7 Click Finish button.

Rev.2.2 Page 11 of 27 RA14-12A-003

 QXLink3 Installation Manual

8 Click the Finish button to restart your computer.

Rev.2.2 Page 12 of 27 RA14-12A-003

 QXLink3 Installation Manual

5.2 Setting File Sharing Environment

5.2.1. Windows 7

1 Click the Start button and input Network and sharing center in the input box to execute.

2 Choose Change advanced sharing settings.

Rev.2.2 Page 13 of 27 RA14-12A-003

 QXLink3 Installation Manual

3 Select Turn off password protected sharing.

4 Click the Save changes button.

You do not need to set the sharing environment if both server and viewer are installed in
the same computer.

Rev.2.2 Page 14 of 27 RA14-12A-003

 QXLink3 Installation Manual

5.3 Setting Permissions for Shared Folders

5.3.1. Windows 7

1 Move to Local STORAGE Path configured in Sever by using Windows Explorer and select Properties.

Rev.2.2 Page 15 of 27 RA14-12A-003

 QXLink3 Installation Manual

2 Move to the Security tab and click Edit button.

Rev.2.2 Page 16 of 27 RA14-12A-003

 QXLink3 Installation Manual

3 Click Add button and input Everyone in the box and then click OK button.

Rev.2.2 Page 17 of 27 RA14-12A-003

 QXLink3 Installation Manual

4 Click OK button to complete setting permissions for shared folders.

The permissions for shared folders should be set everytime when Local STORAGE Path of
sever is changed.

Rev.2.2 Page 18 of 27 RA14-12A-003

 QXLink3 Installation Manual

6. QXLink Viewer Installation

6.1 How to Install

1 Open the QXLink Viewer installation file.

2 Click Install button.

3 Click Next button.

Rev.2.2 Page 19 of 27 RA14-12A-003

 QXLink3 Installation Manual

4 Click Next button.

5 Click Next button.

QXLink Viewer recognizes the operating system automatically while installing the
program.

Rev.2.2 Page 20 of 27 RA14-12A-003

 QXLink3 Installation Manual

6 Click Install button.

7 Click Finish button.

Rev.2.2 Page 21 of 27 RA14-12A-003

 QXLink3 Installation Manual

8 Click Finish button to restart your computer.

This new installation program overwrites the previous installation file.

Rev.2.2 Page 22 of 27 RA14-12A-003

 QXLink3 Installation Manual

7. Running under Standard User Account

You can run both server and viewer under standard user account, not under administrator account.

7.1 Windows 7

Set the access permissions to folders installed QxLink.

7.1.1. How to Set Access Permissions

1 Move to the following path from Windows Explorer.

 C:\Program Files\Vieworks\QXLink3\Log

Rev.2.2 Page 23 of 27 RA14-12A-003

 QXLink3 Installation Manual

2 Click the right mouse button on the Log folder to select Properties, and move to the Security tab.

3 Select Users in Group or user names and click the Edit button.

Rev.2.2 Page 24 of 27 RA14-12A-003

 QXLink3 Installation Manual

4 Select Users in Group or user names and check Allow to Full control item in Permissions for Users.

5 Click the OK button to save settings.

6 Set access permissions to the following folders same as the procedures described in <5.2.1 Windows
7>.
 C:\Program Files\Vieworks\QXLink3\Server
 C:\Program Files\Vieworks\QXLink3\Viewer

Rev.2.2 Page 25 of 27 RA14-12A-003

 QXLink3 Installation Manual

8. Regulatory Information

8.1 FDA (Food and Drug Administration)

Item Description
21 CFR Part 207 -
21 CFR Part 801 -
21 CFR 1000-1050 -
The Electronic product radiation control provisions Sections 531-542 of the Act

Rev.2.2 Page 26 of 27 RA14-12A-003

 QXLink3 Installation Manual

9. Revision History

Version Date Description

1.0 2012-10-16 Initial Release
2013-04-12  (Revised) Apply the changed data from S/W V3.0.0.6~3.0.0.10
1.1
2013-04-18  (Deleted) CE mark on the front covers
 (Deleted) Contents related to Windows XP
2.0 2013-10-19
 (Added) 10 Regulatory Information
 (Changed) 3. Getting Started
2.1 2014-02-21
 (Changed) 4. Program Installation
2.2 2014-07-30  (Revised) Document format

Vieworks
Vieworks.Co.,Ltd
#107-108, 601-610 Suntechcity 2
52 Sagimakgol-ro (307-2 Sangdaewon-dong)
Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-736 South Korea
Telephone: +82-70-7011-6161
Fax: +82-31-737-4954
Homepage: http://www.vieworks.com

European representative: DONGBANG ACUPRIME

1 Forrest Units, Hennock Road East, Marsh Barton, Exeter EX2 8RU, UK
Telephone: +44(0)-1392-829500
Homepage: http://www.acuprime.com

Rev.2.2 Page 27 of 27 RA14-12A-003