Scribd
Upload
257 views9 pages

CPX USB+Adapter+Driver+Install+Process+Ca0pro+SPIMS+

This document provides steps to install the driver for a USB to M12 adapter used with Festo software tools: 1. Acquire the driver from the included CD or download the latest version from the Festo support website. 2. Ensure the software drivers are installed in the specified directory or install the downloaded drivers there. 3. Plug in the USB adapter and confirm the installation through Windows prompts and by checking the adapter details in the Device Manager.

Uploaded by

Fernando Gómez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
257 views9 pages

CPX USB+Adapter+Driver+Install+Process+Ca0pro+SPIMS+

This document provides steps to install the driver for a USB to M12 adapter used with Festo software tools: 1. Acquire the driver from the included CD or download the latest version from the Festo support website. 2. Ensure the software drivers are installed in the specified directory or install the downloaded drivers there. 3. Plug in the USB adapter and confirm the installation through Windows prompts and by checking the adapter details in the Device Manager.

Uploaded by

Fernando Gómez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

USB TO M12 ADAPTER DRIVER INSTALLATION

Steven Proud
Regional Contact Center Product Support Agent
Electric Drives, Servo Pneumatic Systems & Vision
Tel: 905-614-2761
[email protected]

Application Description:
This document shows the procedure for installing the Driver for the USB to M12 adapter used with FMT(Festo Maintenance Tool) or FCT (Festo
Configuration Tool Software)

14.07.2011 1
Step#1
Acquire the drivers for the USB adapter.
If you don’t have a new adapter, you may need to contact technical support for older drivers.
If you are installing a new adapter, you should have received the proper driver on a CD.
If you are installing onto a Windows 7 PC you will likely need to get the latest driver from the internet. Click the link to get to the shown
download area.
htt //
http://www.festo.com/net/en-us_us/SupportPortal/default.aspx?cat=1118&tab=5&s=t
f t / t/ /S tP t l/d f lt ? t 1118&t b 5& t

14.07.2011 2
Step#2
Makes sure the software drivers are installed on your PC

If you have already installed the FMT(Festo


Maintenance Tool), the driver for new adapters
should already exist in the following directory

If you have Downloaded from the internet, you will


need to install the drivers to the same directory as
shown above

14.07.2011 3
Step#3
Plug in the USB adapter. You should observe the following screen pop-up. Select “YES”

14.07.2011 4
Step#4
You should observe the following screen pop-up. Click the option as shown, then select “NEXT”

14.07.2011 5
Step#5
You should observe the following screen pop-up. Click the “Have Disk” option as shown, then select the location of the driver based on
where you put it (how you acquired the file will determine the needs here). When you have selected the driver click on the “Next” button

The
h driver
di ffor new adapters
d should
h ld already
l d exist
i in
i
the following directory as detailed in Step#2

14.07.2011 6
Step#6
You should observe the following screen pop-up. The drivers will now be installed.

14.07.2011 7
Step#7a
To confirm the COM port the adapter is using along with other setting – open the “Device Manager” on your PC. The following should be
observed for a variety of Old/New adapters.

14.07.2011 8
Step#7b
To confirm the COM port the adapter is using along with other setting – open the “Device Manager” on your PC. The following should be
observed for a variety of Old/New adapters.

14.07.2011 9

You might also like