Scribd
Upload
54 views

Data Manager

The Fronius Datamanager 2.0 is a device that controls and displays data from a solar energy system. It has an IP switch that can set the IP address to allow direct connection via LAN or open a WLAN access point. It has LED indicators for WLAN connection, solar.web connection, power supply, and device connection status. Ports on the device include an Ethernet port, digital input/outputs, and an RS485 port to connect to solar inverters and other devices.

Uploaded by

Radu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views

Data Manager

The Fronius Datamanager 2.0 is a device that controls and displays data from a solar energy system. It has an IP switch that can set the IP address to allow direct connection via LAN or open a WLAN access point. It has LED indicators for WLAN connection, solar.web connection, power supply, and device connection status. Ports on the device include an Ethernet port, digital input/outputs, and an RS485 port to connect to solar inverters and other devices.

Uploaded by

Radu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Fronius Datamanager 2.

Controls, connec-
tions and dis-
plays on the
Fronius Dataman- (1)
ager (2) (5)

(3) (4)

(10) (9) (8) (7) (6)

No. Function
(1) IP switch
For switching the IP address:
Switch position A
Default IP address with opening of the WLAN access point

Fronius Datamanager 2.0 uses the set IP address 169.254.0.180 to establish a


direct connection to a PC via LAN.

Setting the IP switch to position A also opens an access point to enable a direct
WLAN connection to the Fronius Datamanager 2.0.

Access data for this access point:


Network name: FRONIUS_240.XXXXXX
Key: 12345678

Access to the Fronius Datamanager 2.0 is possible:


- Using the DNS name "http://datamanager"
- Using the IP address 169.254.0.180 for the LAN interface
- Using the IP address 192.168.250.181 for the WLAN access point
Switch position B
Assigned IP address

The Fronius Datamanager 2.0 uses an assigned IP address (factory setting dy-
namic (DHCP))
The IP address can be set on the Fronius Datamanager 2.0 website.

18
No. Function
(2) WLAN LED

EN
- Flashing green: Fronius Datamanager 2.0 is in Service mode
(IP switch on the Fronius Datamanager 2.0 plug-in card is in position A or Ser-
vice mode has been activated via the inverter display, the WLAN access point
is open)
- Lights up green: WLAN connection established
- Flashing green/red (alternately): WLAN access point has timed out following
activation (1 hour)
- Lights up red: no WLAN connection
- Flashing red: faulty WLAN connection
- Does not light up: Fronius Datamanager 2.0 is in Slave mode
(3) Solar.web connection LED
- Lights up green: Fronius Solar.web connection established
- Lights up red: Fronius Solar.web connection is required but has not been es-
tablished
- Does not light up: no connection to Fronius Solar.web is required
(4) Supply LED
- Lights up green: Fronius Solar Net is providing an adequate power supply; Fro-
nius Datamanager 2.0 is ready for use.
- Does not light up: insufficient or no power supply from Fronius Solar Net - an
external power supply is required
or
the Fronius Datamanager 2.0 is in Slave mode
- Flashing red: update in progress

IMPORTANT! Never interrupt the power supply while an update is in progress.


- Lights up red: update failed
(5) Connection LED
- Lights up green: connection established within Fronius Solar Net
- Lights up red: connection within Fronius Solar Net interrupted
- Does not light up: Fronius Datamanager 2.0 is in Slave mode
(6) LAN connection
Ethernet interface, colour-coded blue, for connecting the Ethernet cable
(7) I/Os
Digital inputs and outputs
D-
9
7
5
3
1
-
-
D+
+
+
8
6
4
2
0

I IO RS485

Modbus RTU 2-wire (RS485):


D- Modbus data -
D+ Modbus data +

19

You might also like