Scribd
Upload
89 views11 pages

Part2 Static 1 1

1. The document summarizes a static simulation analysis of Part2 using Solidworks. 2. It includes information on the model, study properties, material properties, loads applied, mesh details, and results showing maximum von Mises stress. 3. The maximum von Mises stress of 2.673e+08N/m^2 occurred at node 80633.

Uploaded by

Hemn Rafiq Tofiq
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
89 views11 pages

Part2 Static 1 1

1. The document summarizes a static simulation analysis of Part2 using Solidworks. 2. It includes information on the model, study properties, material properties, loads applied, mesh details, and results showing maximum von Mises stress. 3. The maximum von Mises stress of 2.673e+08N/m^2 occurred at node 80633.

Uploaded by

Hemn Rafiq Tofiq
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 11

Simulation of Part2

Date: 30 November 2022


Designer: Solidworks
Study name: Static 1
Analysis type: Static

Table of Contents
Description...........................................1
Assumptions..........................................2
Model Information..................................2
Study Properties.....................................3
Units..................................................3
Material Properties.................................4
Loads and Fixtures..................................4
Connector Definitions..............................5
Description Interaction Information............................5
No Data Mesh information....................................5
Sensor Details........................................6
Resultant Forces....................................6
Beams.................................................6
Study Results........................................7
Conclusion..........................................10

Analyzed with SOLIDWORKS Simulation Simulation of Part2 1


Assumptions

Model Information

Model name: Part2

Current Configuration: Default

Solid Bodies
Document Name and Document Path/Date
Treated As Volumetric Properties
Reference Modified
SurfaceCut2
Mass:0.228819 kg
C:\Users\Hemn Tofiq\
Volume:5.16663e-05 m^3
Desktop\Hip\My Design\
Solid Body Density:4,428.78 kg/m^3
Design 1\Part2.SLDPRT
Weight:2.24242 N
Nov 30 22:35:44 2022

Analyzed with SOLIDWORKS Simulation Simulation of Part2 2


Study Properties
Study name Static 1
Analysis type Static
Mesh type Solid Mesh
Thermal Effect: On
Thermal option Include temperature loads
Zero strain temperature 298 Kelvin
Include fluid pressure effects from SOLIDWORKS Off
Flow Simulation
Solver type Automatic
Inplane Effect: Off
Soft Spring: Off
Inertial Relief: Off
Incompatible bonding options Automatic
Large displacement Off
Compute free body forces On
Friction Off
Use Adaptive Method: Off
Result folder SOLIDWORKS document (C:\Users\Hemn Tofiq\
Desktop\Hip\My Design\Design 1)

Units
Unit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2

Analyzed with SOLIDWORKS Simulation Simulation of Part2 3


Material Properties
Model Reference Properties Components
Name: Ti-6Al-4VSolution SolidBody 1(SurfaceCut2)
treated and aged (SS) (Part2)
Model type: Linear Elastic Isotropic
Default failure Max von Mises Stress
criterion:
Yield strength: 8.27371e+08 N/m^2
Tensile strength: 1.05e+09 N/m^2
Elastic modulus: 1.048e+11 N/m^2
Poisson's ratio: 0.31
Mass density: 4,428.78 kg/m^3
Shear modulus: 4.10238e+10 N/m^2
Thermal expansion 9e-06 /Kelvin
coefficient:

Curve Data:N/A

Analyzed with SOLIDWORKS Simulation Simulation of Part2 4


Loads and Fixtures
Fixture name Fixture Image Fixture Details
Entities: 5 face(s)
Type: Fixed Geometry

Fixed-1

Resultant Forces
Components X Y Z Resultant
Reaction force(N) 0.00331509 2,300.1 0.0738535 2,300.1
Reaction Moment(N.m) 0 0 0 0

Load name Load Image Load Details


Entities: 1 face(s)
Type: Apply normal force
Value: 2,300 N
Force-1

Connector Definitions
No Data

Interaction Information
No Data

Analyzed with SOLIDWORKS Simulation Simulation of Part2 5


Mesh information
Mesh type Solid Mesh
Mesher Used: Blended curvature-based mesh
Jacobian points for High quality mesh 16 Points
Maximum element size 1.8629 mm
Minimum element size 0.620961 mm
Mesh Quality High

Mesh information - Details


Total Nodes 112522
Total Elements 76370
Maximum Aspect Ratio 7.9143
% of elements with Aspect Ratio < 3 99.9
Percentage of elements with Aspect Ratio > 10 0
Percentage of distorted elements 0
Time to complete mesh(hh;mm;ss): 00:00:10
Computer name:

Sensor Details
No Data

Analyzed with SOLIDWORKS Simulation Simulation of Part2 6


Resultant Forces
Reaction forces
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N 0.00331509 2,300.1 0.0738535 2,300.1

Reaction Moments
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m 0 0 0 0

Free body forces


Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N -0.00455967 -0.540083 -1.41854 1.51788

Free body moments


Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m 0 0 0 1e-33

Beams
No Data

Analyzed with SOLIDWORKS Simulation Simulation of Part2 7


Study Results

Name Type Min Max


Stress1 VON: von Mises Stress 1.781e-02N/m^2 2.673e+08N/m^2
Node: 49810 Node: 80633

Part2-Static 1-Stress-Stress1

Name Type Min Max


Displacement1 URES: Resultant Displacement 0.000e+00mm 1.367e-01mm
Node: 13 Node: 103575

Analyzed with SOLIDWORKS Simulation Simulation of Part2 8


Name Type Min Max

Part2-Static 1-Displacement-Displacement1

Name Type Min Max


Strain1 ESTRN: Equivalent Strain 2.345e-13 1.427e-03
Element: 4346 Element: 7754

Analyzed with SOLIDWORKS Simulation Simulation of Part2 9


Name Type Min Max

Part2-Static 1-Strain-Strain1

Name Type
Displacement1{1} Deformed shape

Analyzed with SOLIDWORKS Simulation Simulation of Part2 10


Name Type

Part2-Static 1-Displacement-Displacement1{1}

Conclusion

Analyzed with SOLIDWORKS Simulation Simulation of Part2 11

You might also like