Scribd Logo
Upload

Welcome to Scribd!

  • 189 views

    Specification Cylinder Block Caterpillar 3412 Serial Number Prefix 38S

    Uploaded by

    Amir J.
    The document provides specifications and torque values for various components of a cylinder block including dowel sizes, gasket thicknesses, bore sizes, plug locations, and torque values for fasteners holding parts like water pumps, bearing caps, and piston cooling tubes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Specification Cylinder Block Caterpillar 3412 Serial Number Prefix 38S

    Uploaded by

    Amir J.
    189 views2 pages
    The document provides specifications and torque values for various components of a cylinder block including dowel sizes, gasket thicknesses, bore sizes, plug locations, and torque values for fasteners holding parts like water pumps, bearing caps, and piston cooling tubes.

    Original Description:

    Specification Cylinder Block Caterpillar 3412 Serial Number prefix 38S

    Original Title

    Specification Cylinder Block Caterpillar 3412 Serial Number prefix 38S

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides specifications and torque values for various components of a cylinder block including dowel sizes, gasket thicknesses, bore sizes, plug locations, and torque values for fasteners holding parts like water pumps, bearing caps, and piston cooling tubes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    189 views2 pages

    Specification Cylinder Block Caterpillar 3412 Serial Number Prefix 38S

    Uploaded by

    Amir J.
    The document provides specifications and torque values for various components of a cylinder block including dowel sizes, gasket thicknesses, bore sizes, plug locations, and torque values for fasteners holding parts like water pumps, bearing caps, and piston cooling tubes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    1996/05/28 Cylinder Block (SENR1136-00)

    SMCS - SENR11360042

    (1) Torque for three studs to hold the water pump ... 27 ± 4 N·m (20 ± 3 lb ft)

    (2) Plug (two on front and two on rear).

    (3) Length of dowels (four) out of the block face ... 18.5 ± 0.5 mm (.73 ± .02 in)

    (4) Thickness of the gasket between the cylinder block and top plates ... 0.21 ± 0.03 mm (.008 ± .001 in)

    (5) Thickness of the top plates ... 8.585 ± 0.025 mm (.3380 ± .0010 in)

    (6) Make reference to Cylinder Liner Projection in the Systems Operation, Testing & Adjusting, for the height of the liner.

    (7) Bore in the block for the camshaft bearings (seven bores) ... 76.835 ± 0.018 mm (3.0250 ± .0007 in)

    (8) Torque for one plug on front and two on rear of the block ... 80 ± 15 N·m (60 ± 11 lb ft)

    Put 5P3413 Pipe Sealant on the threads of the plug.

    (9) Bore in the block for the main bearings:

    Standard, original size (new) ... 129.891 ± 0.013 mm (5.1138 ± .0005 in)

    0.64 mm (.025 in) larger than original size ... 130.526 ± 0.013 mm (5.1388 ± .0005 in)

    (10) Projection of dowels (four) out of the front and rear faces of the block ... 19.0 ± 0.5 mm (.75 ± .02 in)

    (11) Width of slot for bearing cap ... 215.900 ± 0.013 mm (8.5000 ± .0005 in)

    Width of bearing cap ... 215.900 ± 0.013 mm (8.5000 ± .0005 in)

    Press fit between sides of the main bearing cap and the cylinder block ... 0.026 mm (.0010 in) tight to 0.026 mm (.0010 in) loose

    (12) Torque for the bolts that hold the piston cooling tubes ... 25 ± 7 N·m (18 ± 5 lb ft)

    (13) Torque for the bolts that hold the caps for the main bearings:

    Install the main bearing caps with the marks (arrow) toward the front of the engine. Each cap has a number on the bottom and must be installed in
    the same position as the correct number on the left side of the block pan rail.

    a. Tighten the bolts on left (tab) side to ... 258 ± 14 N·m (190 ± 10 lb ft)

    b. Tighten the bolts on right side to ... 258 ± 14 N·m (190 ± 10 lb ft)

    c. Put a mark on each bolt and cap.

    d. Tighten the bolts on right side, from the mark ... 120 ± 5 degrees

    e. Tighten the bolts on left (tab) side, from the mark ... 120 ± 5 degrees
    (14) Dimension (new) from the centerline of crankshaft bearing bore to top of block (top deck) ... 419.10 ± 0.15 mm (16.500 ± .006 in)

    (15) Dimension (new) from centerline of crankshaft bearing bore to bottom of block (pan rails) ... 165.10 ± 0.10 mm (6.500 ± .004 in)

    Right Side Of Engine


    (16) Plug. Two plugs (one located at front and the other located at rear of right cylinder bank).

    (17) Plug.

    NOTE: Put 9S3263 Thread Lock on the threads of all plugs installed without a seal.

    NOTE: For cylinder block repair procedures, refer to Special Instruction, 3400 Cylinder Head To Block Joint Repair Procedure, SEHS9564.

    PIP-10862268

    2022/11/20

    14:30:51+07:00

    SENR11360042

    © 2022 Caterpillar Inc.


    Caterpillar:

    Confidential Green

    You might also like