LAMCO Manufactured Product - Same Day Emergency Service

SINGLE PART BODY MECHANICAL SPLICE

WIRE ROPE SLINGS
Flemish Eye Splice

In the standard flemish eye mechanical

splice, wire rope is separated into two
Hook latches
parts: three adjacent strands to one are available
part and three adjacent strands along upon request
with the core to the other part. The two
parts are then re - laid back in opposite
directions to form an eye and ends are
secured with a pressed metal sleeve.

R AT E D C A PA C I T Y – To n s * E-E
Basket Eye E-HT E-EH
Hitch Dimensions Thimble Hook

Rope Choker
Dia. Vert. Hitch WLL**
(in.) *** 60° 45° 30° A B A B Tons E R

1/4 0.65 0.48 1.3 1.1 0.91 0.65 2.0 4 .88 1.63 3/4 .89 3.34
5/16 1.0 0.74 2.0 1.7 1.4 1.0 2.5 5 1.06 1.88 1 .91 3.81
3/8 1.4 1.1 2.9 2.5 2.0 1.4 3.0 6 1.13 2.13 1-1/2 1.00 4.14

7/16 1.9 1.4 3.9 3.4 2.7 1.9 3.5 7 1.25 2.38 2 1.09 4.69
6 x 19 I W R C

1/2 2.5 1.9 5.1 4.4 3.6 2.5 4.0 8 1.50 2.75 3 1.36 5.77
9/16 3.2 2.4 6.4 5.5 4.5 3.2 4.5 9 1.50 2.75 5 1.61 7.37
5/8 3.9 2.9 7.8 6.8 5.5 3.9 5.0 10 1.75 3.25 5 1.61 7.37
3/4 5.6 4.1 11 9.7 7.9 5.6 6.0 12 2.00 3.75 7-1/2 2.08 9.07
7/8 7.6 5.6 15 13 11 7.6 7.0 14 2.25 4.25 10 2.27 10.08

1 9.8 7.2 20 17 14 9.8 8.0 16 2.50 4.50 10 2.27 10.08

1-1/8 12 9.1 24 21 17 12 9.0 18 2.88 5.13 15 3.02 12.53
1-1/4 15 11 30 26 21 15 10.0 20 2.88 5.13 15 3.02 12.53

1-3/8 18 13 36 31 25 18 11 22 3.50 6.25 AH-22 3.02 12.53

1-1/2 21 16 42 37 30 21 12 24 3.50 6.25 AH-22 3.02 12.53
1-5/8 24 18 49 42 35 24 13 26 4.00 8.00 AH-30 3.25 14.06
6 x 36 IWRC

1-3/4 28 21 57 49 40 28 14 28 4.50 9.00 AH-37 3.00 18.19

2 37 28 73 63 52 37 16 32 6.00 12.00 AH-45 3.38 20.12
2-1/4 44 35 89 77 63 44 18 36 7.00 14.00 AH-60 4.12 23.72

2-1/2 54 42 109 94 77 54 20 40
2-3/4 65 51 130 113 92 65 22 44
3 77 60 153 133 108 77 24 48

3-1/2 102 79 203 176 144 102 28 56

4 130 101 260 224 183 130 32 64

All capacities in tons of 2,000 lbs. All eye and fitting dimensions in inches.
* Rated Capacities Basket Hitch based on D/d Ratio of 25.
Rated Capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter.
Rated Capacities based on design factor of 5. Horizontal sling angles less than 30° shall not be used.
** Working Load Limit, based on standard carbon f it tings unless noted otherwise.
*** See Choker Hitch Rated Capacit y Adjustment on page 31.

33
 LAMCO Manufactured Product - Same Day Emergency Service
2 LEG BRIDLE
R AT E D C A PA C I T Y Alloy Oblong Link Hook
( To n s )

Rope
Dia. WLL**
(in.) 60° 45° 30° D L W Tons E R

1/4 1.1 0.91 0.65 .50 5.00 2.50 3/4 .89 3.34
5/16 1.7 1.4 1.0 .50 5.00 2.50 1 .91 3.81
3/8 2.5 2.0 1.4 .50 5.00 2.50 1-1/2 1.00 4.14

7/16 3.4 2.7 1.9 .75 5.50 2.75 2 1.09 4.69

1/2 4.4 3.6 2.5 .75 5.50 2.75 3 1.36 5.77
6 x 19 I W RC

9/16 5.5 4.5 3.2 1.00 8.00 4.00 3 1.36 5.77

5/8 6.8 5.5 3.9 1.00 8.00 4.00 5 1.61 7.37
3/4 9.7 7.9 5.6 1.00 8.00 4.00 5 1.61 7.37
7/8 13 11 7.6 1.25 8.75 4.38 7-1/2 2.08 9.07

1 17 14 9.8 1.25 8.75 4.38 10 2.27 10.08

1-1/8 21 17 12 1.50 12.00 6.00 10 2.27 10.08
1-1/4 26 21 15 1.75 12.00 6.00 15 3.02 12.53

1-3/8 31 25 18 1.75 12.00 6.00 15 3.02 12.53

6 x 36 IWRC

1-1/2 37 30 21 2.00 14.00 7.00 AH-22 3.02 12.53

1-5/8 42 35 24 2.00 14.00 7.00 AH-30 3.25 14.06 Hook latches
1-3/4 49 40 28 2.25 16.00 8.00 AH-37 3.00 18.19 are available
2 63 52 37 2.50 16.00 8.00 AH-45 3.38 20.12 upon request
Rated Capacities based on pin diameter no larger than natural eye width or less than
the nominal sling diameter.
Rated Capacities based on design factor of 5.
Horizontal sling angles of less than 30° shall not be used unless noted otherwise.
** Working Load Limit, based on standard carbon fittings.

3 LEG BRIDLE* 4 LEG BRIDLE*

R AT E D C A PA C I T Y R AT E D C A PA C I T Y
( To n s ) ( To n s )

Rope Rope
Dia. Dia.
(in.) 60° 45° 30° (in.) 60° 45° 30°
5/16 3.5 2.8 2.0
1/4 1.7 1.4 0.97
3/8 5.0 4.1 2.9
5/16 2.6 2.1 1.5
3/8 3.7 3.0 2.2 7/16 6.7 5.5 3.9
6 x 19 IWRC

1/2 8.8 7.1 5.1

7/16 5.0 4.1 2.9
9/16 11 9.0 6.4
1/2 6.6 5.4 3.8
9/16 8.3 6.8 4.8 5/8 14 11 7.8
6 x 19 I W RC

5/8 10 8.3 5.9 3/4 19 16 11

3/4 15 12 8.4 7/8 26 21 15
7/8 20 16 11
1 34 28 20
1 26 21 15 1-1/8 42 34 24
1-1/8 31 26 18 1-1/4 51 42 30
6 x 36

1-1/4 38 31 22 1-3/8 62 50 36
1-1/2 73 60 42
1-3/8 46 38 27
6 x 36 IWRC

1-1/2 55 45 32
1-5/8 63 52 37
All capacities in tons of 2,000 lbs. Horizontal sling
1-3/4 74 60 42 angles of less than 30° shall not be used.

All capacities in tons of 2,000 lbs. Horizontal sling

angles of less than 30° shall not be used.

*See 2 Leg Bridle chart for hook size. All hook sizes correspond with rope diameter.

34
 LAMCO Manufactured Product - Same Day Emergency Service

Cable Laid Wire Rope Slings

These smooth and very flexible slings are made from cut lengths of cable-laid fabric that is
machine formed by laying six wire ropes in a helical pattern around a core rope. Flemish eye
mechanical splices, secured by pressed metal sleeves, provide centerline pull at the eyes.
RATED CAPACITY - Tons*
Eye Slip
Basket Hitch Thru Heavy
Thimble Thimble

Body Vert. Choker

Dia. Hitch** 60° 45° 30° A B ST HT
1/4 .50 .34 1.0 .87 .71 .50 2 4 W-2 1/4
3/8 1.1 .74 2.2 1.9 1.5 1.1 3 6 W-2 3/8

7x7x7
1/2 1.9 1.3 3.7 3.2 2.6 1.9 4 8 W-3 1/2

5/8 2.8 1.9 5.5 4.8 3.9 2.8 5 10 W-4 5/8

3/4 4.1 2.8 8.1 7.0 5.8 4.1 6 12 W-4 3/4
7/8 5.4 3.7 11. 9.4 7.6 5.4 7 14 W-5 7/8
7x7x19

1 6.9 4.7 14. 12. 9.7 6.9 8 16 W-5 1

1 1/8 8.3 5.8 17. 14. 12. 8.3 9 18 W-6 1 1/8
1 1/4 9.9 7.0 20. 17. 14. 9.9 10 20 W-6 1 1/4
* Rated Capacities Basket Hitch Based on D/d of 10 or greater.
** See Choker Hitch Rated Capacity Adjustment on page 31.
Rated Capacities based on pin diameter no larger than natural eye width or less than the nominal sling
diameter.
Rated Capacities based on design factor of 5.
Sling angles less than 30 degrees shall not be used

615 Six- part f lat braided sling

R AT E D C A PA C I T Y – Tons* Eye
Dimensions Slip
Thru Heavy
Rope Thimble Thimble
Dia. Width Thick. Choker Basket
(in.) of Body of Body Vert. Hitch** Hitch A B ST HT

#3/32 7/16 1/4 0.42 0.37 0.84 2 4 W-2 1/4

1/8 9/16 3/8 0.84 0.74 1.7 3 6 W-2 5/16
3/16 13/16 1/2 1.6 1.4 3.2 4 8 W-3 1/2

1/4 1-1/8 11/16 2.9 2.5 5.7 5 10 W-4 5/8

5/16 1-3/8 7/8 4.4 3.9 8.9 6 12 W-4 3/4
X I P I W RC

3/8 1-11/16 1 6.3 5.5 13 7 14 W-5 7/8

7/16 2 1-3/16 8.6 7.5 17 8 16 W-5 1

1/2 2-1/4 1-5/16 11 9.8 22 9 18 W-6 1-1/8
9/16 2-1/2 1-1/2 14 12 28 10 20 W-6 1-3/8

5/8 2-13/16 1-11/16 17 15 35 11 22 W-7 1-1/2

3/4 3-3/8 2 25 22 49 12 24 W-8 1-5/8
7/8 4 2-5/16 33 29 67 14 28 W-9 2

1 4-1/2 2-11/16 43 38 87 16 32 W-10 -

# Made with 7 x 19 GAC component rope.

* Rated Capacities Basket Hitch based on D/d ratio of 25 times the component rope
diameter.
** See Choker Hitch Rated Capacity Adjustment on page 31.
Rated Capacities based on pin diameter no larger than natural eye width or less
than the nominal sling diameter.
Rated Capacities based on design factor of 5.
Horizontal sling angles less than 30° shall not be used.
All capacities in tons of 2,000 lbs. All eye and fitting dimensions in inches.

35