Scribd
Upload
60 views13 pages

Connection 4

This document provides design details for Project Item 64, including project name, materials, cross sections, load effects, plate checks, bolt checks, and weld checks. Steel A36 with a minimum yield strength of 248.2 MPa and concrete with a compressive strength of 4000 psi are used. Beams and columns with cross sections IPE300, IPE270, and IPE200 are designed. Load effects including axial force, shear forces, and bending moments are presented. Plate stresses, bolt capacities, and weld capacities are checked against design limits. The checks indicate all components meet the specified design codes and standards.

Uploaded by

Der3'am Al m7armeh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
60 views13 pages

Connection 4

This document provides design details for Project Item 64, including project name, materials, cross sections, load effects, plate checks, bolt checks, and weld checks. Steel A36 with a minimum yield strength of 248.2 MPa and concrete with a compressive strength of 4000 psi are used. Beams and columns with cross sections IPE300, IPE270, and IPE200 are designed. Load effects including axial force, shear forces, and bending moments are presented. Plate stresses, bolt capacities, and weld capacities are checked against design limits. The checks indicate all components meet the specified design codes and standards.

Uploaded by

Der3'am Al m7armeh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

Project:

Project no:
Author:

Project data
Project name
Project number
Author
Description
Date 4/3/2022
Design code AISC 360-16

Material
Steel A36
Concrete 4000 psi

1 / 13
Project:
Project no:
Author:

Project item 64

Design
Name 64
Description
Analysis Stress, strain/ loads in equilibrium
Design code AISC - ASD 2016

Beams and columns


β – Direction γ - Pitch α - Rotation Offset ex Offset ey Offset ez
Name Cross-section Forces in
[°] [°] [°] [mm] [mm] [mm]
18 4 - IPE300 0.0 0.0 0.0 -4000 0 0 Position
47 5 - IPE270 0.0 0.0 0.0 0 0 0 Position
115 2 - IPE200 0.0 0.0 0.0 0 0 0 Position

2 / 13
Project:
Project no:
Author:

3 / 13
Project:
Project no:
Author:

Cross-sections
Name Material
4 - IPE300 A36
5 - IPE270 A36
2 - IPE200 A36

4 / 13
Project:
Project no:
Author:

Cross-sections
Name Material Drawing

4 - IPE300 A36

5 - IPE270 A36

2 - IPE200 A36

Bolts
Diameter fu Gross area
Name Bolt assembly
[mm] [MPa] [mm2]
16 A325M 16 A325M 16 830.0 201

5 / 13
Project:
Project no:
Author:

Load effects (forces in equilibrium)


N Vy Vz Mx My Mz
Name Member
[kN] [kN] [kN] [kNm] [kNm] [kNm]
DSTL2(1) 18 -9.7 0.2 -47.8 0.0 59.9 0.2
47 0.0 0.0 -16.9 0.0 -1.8 0.0
115 0.0 0.1 12.4 0.0 -1.9 0.0
DSTL7(2) 18 -4.2 0.1 -20.8 0.0 26.0 0.1
47 0.0 0.0 -7.3 0.0 -0.7 0.0
115 0.0 0.0 4.7 0.0 -0.7 0.0
DSTL1(3) 18 -6.5 0.1 -32.4 0.0 40.4 0.1
47 0.0 0.0 -11.3 0.0 -1.1 0.0
115 0.0 0.1 7.4 0.0 -1.1 0.0

Check

Summary
Name Value Check status
Analysis 100.0% OK
Plates 0.0 < 5.0% OK
Bolts 39.9 < 100% OK
Welds 58.7 < 100% OK
Buckling Not calculated

Plates
fy Thickness σEd εPl σcEd
Name Loads Check status
[MPa] [mm] [MPa] [%] [MPa]
18-bfl 1 248.2 10.7 DSTL2(1) 9.2 0.0 0.0 OK
18-tfl 1 248.2 10.7 DSTL2(1) 8.6 0.0 0.0 OK
18-w 1 248.2 7.1 DSTL2(1) 37.6 0.0 0.0 OK
47-bfl 1 248.2 10.2 DSTL2(1) 24.2 0.0 0.0 OK
47-tfl 1 248.2 10.2 DSTL2(1) 24.1 0.0 0.0 OK
47-w 1 248.2 6.6 DSTL2(1) 120.9 0.0 8.8 OK
115-bfl 1 248.2 8.5 DSTL2(1) 16.6 0.0 0.0 OK
115-tfl 1 248.2 8.5 DSTL2(1) 17.2 0.0 0.0 OK
115-w 1 248.2 5.6 DSTL2(1) 127.3 0.0 10.5 OK
FP1 248.2 12.0 DSTL2(1) 72.6 0.0 8.8 OK
FP1 248.2 12.0 DSTL2(1) 64.1 0.0 10.5 OK

Design data

fy εlim
Material
[MPa] [%]
A36 248.2 5.0

6 / 13
Project:
Project no:
Author:

Symbol explanation
εPl Plastic strain
σcEd Contact stress
σEd Eq. stress
fy Yield strength
εlim Limit of plastic strain

Overall check, DSTL2(1)

7 / 13
Project:
Project no:
Author:

Strain check, DSTL2(1)

Equivalent stress, DSTL2(1)

8 / 13
Project:
Project no:
Author:

Bolts
Ft V Rn/ΩBearing Utt Uts Utts
Shape Item Grade Loads Status
[kN] [kN] [kN] [%] [%] [%]
B1 16 A325M - 1 DSTL2(1) 1.3 9.4 50.7 2.1 25.2 - OK

B2 16 A325M - 1 DSTL2(1) 3.3 14.9 50.7 5.2 39.9 - OK

B3 16 A325M - 1 DSTL2(1) 1.3 9.5 50.7 2.2 25.4 - OK

B4 16 A325M - 1 DSTL2(1) 3.2 14.9 50.7 5.1 39.9 - OK

B5 16 A325M - 1 DSTL2(1) 2.3 12.4 43.0 3.6 33.3 - OK

B6 16 A325M - 1 DSTL2(1) 3.2 12.4 43.0 5.2 33.2 - OK

Design data

Rn/ΩTension Rn/ΩShear
Grade
[kN] [kN]
16 A325M - 1 62.3 37.4

Symbol explanation
Ft Tension force
V Resultant of shear forces Vy, Vz in bolt
Rn/ΩBearing Bolt bearing resistance
Utt Utilization in tension
Uts Utilization in shear
Utts Utilization in tension and shear
Rn/ΩTension Bolt tension resistance AISC 360-16 J3.6
Rn/ΩShear Bolt shear resistance AISC 360-16 – J3.8

Weld sections
Th Ls L Lc Fn Rn/Ω Ut
Item Edge Xu Loads Status
[mm] [mm] [mm] [mm] [kN] [kN] [%]
18-w 1 FP1 E70xx ◢4.0◣ ◢5.7◣ 248 16 DSTL2(1) 2.7 9.4 28.9 OK
E70xx ◢4.0◣ ◢5.7◣ 248 16 DSTL2(1) 3.1 13.4 22.9 OK
18-w 1 FP1 E70xx ◢4.0◣ ◢5.7◣ 179 11 DSTL2(1) 5.6 9.6 58.7 OK
E70xx ◢4.0◣ ◢5.7◣ 179 11 DSTL2(1) 5.2 9.5 54.4 OK

Symbol explanation
Th Throat thickness of weld
Ls Leg size of weld
L Length of weld
Lc Length of weld critical element
Fn Force in weld critical element
Rn/Ω Weld resistance AISC 360-16 J2.4
Ut Utilization

9 / 13
Project:
Project no:
Author:

Buckling
Buckling analysis was not calculated.

Bill of material

Manufacturing operations
Plates Welds Length
Name Shape Nr. Bolts Nr.
[mm]
[mm]
[mm]

CUT1

FP1 P12.0x150.0-250.0 (A36) 1 Double fillet: a = 4.0 250.0 16 A325M 4





FP1 P12.0x151.4-180.0 (A36) 1 Double fillet: a = 4.0 180.0 16 A325M 2





Welds
Throat thickness Leg size Length
Type Material

[mm] [mm]
[mm]

Double fillet E70xx 4.0 5.7 430.0

Bolts
Grip length
Name Count
[mm]
16 A325M 19 4
16 A325M 18 2

Drawing

FP1

10 / 13
Project:
Project no:
Author:

P12.0x250-150 (A36)

FP1

P12.0x180-151 (A36)

11 / 13
Project:
Project no:
Author:

47, IPE270 - Web 1:

115, IPE200 - Web 1:

Code settings
Item Value Unit Reference
Friction coefficient - concrete 0.40 - ACI 349 – B.6.1.4
Friction coefficient in slip-resistance 0.30 - AISC 360-16 J3.8
Limit plastic strain 0.05 -
Plastic
Weld stress evaluation
redistribution

12 / 13
Project:
Project no:
Author:

Item Value Unit Reference


Detailing No
Distance between bolts [d] 2.66 - AISC 360-16 – J3.3
Distance between bolts and edge [d] 1.25 - AISC 360-16 – J.3.4
Concrete breakout resistance check Both
Base metal capacity check at weld fusion
No AISC 360-16: J2-2
face
Cracked concrete Yes ACI 318-14 – Chapter 17
Local deformation check No
Local deformation limit 0.03 - CIDECT DG 1, 3 - 1.1
Analysis with large deformations for hollow section
Geometrical nonlinearity (GMNA) Yes
joints

13 / 13

You might also like