Scribd
Upload
129 views4 pages

RSG 10 R

The RSG 10 R incremental encoder is designed for use in heavy industry and manufacturing environments. It has a stainless steel enclosure, can withstand shocks up to 200g, and has a high bearing load capacity. The encoder provides up to 100,000 pulses per turn and operates at temperatures from -42 to 110 degrees Celsius with optional cooling or heating. Key features include IP67 protection, a coupling separating the internal encoder from the shaft, and compatibility with existing encoder mounting dimensions.

Uploaded by

Max
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
129 views4 pages

RSG 10 R

The RSG 10 R incremental encoder is designed for use in heavy industry and manufacturing environments. It has a stainless steel enclosure, can withstand shocks up to 200g, and has a high bearing load capacity. The encoder provides up to 100,000 pulses per turn and operates at temperatures from -42 to 110 degrees Celsius with optional cooling or heating. Key features include IP67 protection, a coupling separating the internal encoder from the shaft, and compatibility with existing encoder mounting dimensions.

Uploaded by

Max
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

ReSatron GmbH

Eindhovener Str. 58
D-41751 Viersen
Phone (+49) 02162 - 45 06 80
Fax (+49) 02162 - 45 03 04
www. resatron.de
eMail: [email protected]

RSG 10 R
Incremental encoder with stainless
steel cover
• shockproof up to 200 g
• very high bearing load
• up to 100.000 pulses/turn
• pulse frequency up to 4 MHz
• protection class IP 67
• expanded temperature range up to + 110° C
• optional with cooling or heating

The shaft encoder system RSG 10 was especially constructed for use under the conditions of heavy and plant making
industries. The consderably lowers the costs of the mechanical adaption of the encoder, as a high efficient measuring
system, to the different constructions.
System RSG 10 was developed in close cooperation with engineers of electrical maintenance and plant making
departments of the heavy industries. Because of this the already known dimensions of the standard shaft encoder
system have been maintained. The system stays compatible to the mostly required encoders, inspite of its very high
mechanical resistivity.
Because of the extremely high mechanical and atmospheric loads all parts have been manufactured in stainlees steel
(V4A 1.4571).
The high protection class of IP 67 and the very high bearings loads of 100 kg axial and 150 kg radial ease the use of
this encoder under the conditions of the heavy and plant making industries. Additionally the internal encoder is
separated form the shaft of the protection cover by means of a coupling, that e.g. guarantees a protection of the
internal encoder shaft against shocks.
An additional protection cover is not necessary even under the conditions of heavy industries.

RSG 10 R 05/03 - 007 Subject to change Weight approx. 5 kg


1
Technical data PIN - assignment RSG 10 R
Resolution in pulses/turn up to 100.000 I/U Signal PIN Cable
Number of channels 3 or 6 Channel B inverted 1 brown
Pulse frequency up to 4 MHz Heating + 2 red 0,5
Output driver 5 V Line-Driver Zero pulse 3 orange/black
or push-pull Zero pulse inverted 4 orange
Channel A 5 gray
Electrical data Channel A inverted 6 green
Operating voltage UB = 5 VDC ± 5 % Heating - 7 blue 0,5
or UB = 10...30 VDC Channel B 8 white
Current consumption 60...200 mA Shield 9 yellow
Output current 20 mA...1A GND 10 lila
Report „Heating on“ 11 black
Output signals Kanal A, B, N + inverted
UB 12 pink
Mechanische Werte Instructions:
Speed ≤ 6.000 min -1
Start-up torque < 0,3 Ncm (20° C)
Shaft loading < 1.500 N radial The supply voltage of the electric heating (24 VDC)
< 1.000 N axial is, if existing, layed on PIN 2 and 7 (internal not
Moment of inertia 104 rad/s2 connected with UB and GND).

Material The report „heating on“ signals the furning on of the


Housing stainless steel V4A 1.4571 thermostat.
Flange stainless steel V4A 1.4571
Not used out put channels before putting info
Weight < 5 kg
operation.
Ambient conditions Circuit principle
Vibration ≤ 20 g (20...2000 Hz)
Shock ≤ 200 g (11 ms)
Operating temperature 20...+ 80° C
or upgrade to - 42...+ 110° C
Storage temperature - 30 ... + 90° C
Humidity < 85 % r. h.
Protection type IP 67 (DIN 40050/IEC 529)
EMV IEC 801

Type key of encoder


Encoder
Pulse/T Channels Voltage Driver Flange Output Options
type
Look to
X= T = temperature-resistant
RSG 10 R Standard- pulse
3-channelled
5 = 5 VDC S = TTL
up to + 110° C
numbers

Y= 3 = 10 - 30 V1 = 10 mm shaft SG = 12pol.
RSG 10 R 6-channelled VDC
G = push pull
servo flange plug axial
L = air cooling

SS = 12pol.
RSG 10 R plug radial
W = water cooling

RSG 10 R H = electrical heating

RSG 10 R ______ _______ _______ _______ V1 _______ _______

Standard pulse numbers:


10 - 50 - 100 - 125 - 150 - 180 - 200 - 250 - 256 - 300 - 314 - 360 - 400 - 500 - 512 - 600 - 625 - 720 - 750 - 800 - 900 - 1000 - 1024 - 1200
- 1250 - 1375 - 1500 - 1800 - 2000 - 2048 - 2500 - 3600 - 4096 - 5000 - 6000 - 10000 Other pulse numbers on request
2
Dimension and cutout RSG 10 R

3
For your notes:

You might also like