Scribd
Upload
38 views7 pages

Install USB Driver

When connecting a USB cable from a controller to a host computer, the operating system will prompt the user to install drivers. The user should select "Install from a list or specific location" and then "Do not search, I will choose the driver to install". They then browse to the driver folder and select the ftdibus.inf file. After installation is complete, the device manager will show a new "USB Serial Port". Additional drivers may need to be installed by repeating the process and selecting the ftdiport.inf file. When complete, the COM port number for the controller will be displayed in device manager.

Uploaded by

Alex Vladut
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views7 pages

Install USB Driver

When connecting a USB cable from a controller to a host computer, the operating system will prompt the user to install drivers. The user should select "Install from a list or specific location" and then "Do not search, I will choose the driver to install". They then browse to the driver folder and select the ftdibus.inf file. After installation is complete, the device manager will show a new "USB Serial Port". Additional drivers may need to be installed by repeating the process and selecting the ftdiport.inf file. When complete, the COM port number for the controller will be displayed in device manager.

Uploaded by

Alex Vladut
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

https://www.ruidacontroller.

com

When the USB cable to the host, the operating system will be prompted to find new
hardware and install the driver required.

Select “Install from a list or specific location[Advanced]” and then select Next.
Select “Install from a list or specific location” and then select Next.

Select “Do not search, I will choose the driver to install” and then select Next.
Click button “Have Disk”.

Select the “Browse”, navigate to the directory where the folder drive.

Select the file ftdibus.inf, then OK, and in the “Found New Hardware Wizard” dialog
box, choose “Next”.
After the installation process, within the Device Manger will show “USB Serial Port”.
Operating system will still be prompted to find new hardware wizard.

Select “Install from a list or specific location [Advanced]” and then select “Next”. The
remaining operation is consistent with the foregoing. Until the following dialog box
appears.
Select “Have Disk”, and manually navigate to the driver to the driver location, select
the file ftdiport.inf.

Then select “Next”, the operating system will automatically install the driver.
After installation, the prompt window appears.

View Device Manager once again. The port number of the COM appears in the
following of the “USB Serial Port”. Specific values relate with the status of the system port.

You might also like