Scribd
Upload
240 views2 pages

Cat 980H Wheel Loader: Fuel Burn

The document provides specifications for the Cat 980H Wheel Loader including its fuel burn rates under low, medium, and high duty cycles. It lists key dimensions of the loader labeled A through Q along with ground clearance and tread/tire widths. Specifications include its flywheel power, engine details, speeds, hydraulic cycle time, and fuel/hydraulic tank capacities. Performance data includes bucket capacity, operating loads, struck capacity, tipping loads, breakout force, and operating weight.

Uploaded by

Mohamed Badian Traore
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
240 views2 pages

Cat 980H Wheel Loader: Fuel Burn

The document provides specifications for the Cat 980H Wheel Loader including its fuel burn rates under low, medium, and high duty cycles. It lists key dimensions of the loader labeled A through Q along with ground clearance and tread/tire widths. Specifications include its flywheel power, engine details, speeds, hydraulic cycle time, and fuel/hydraulic tank capacities. Performance data includes bucket capacity, operating loads, struck capacity, tipping loads, breakout force, and operating weight.

Uploaded by

Mohamed Badian Traore
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Cat 980H Wheel Loader

Fuel Burn Low duty Medium Duty High Duty


L/hr 15.6 – 20.6 20.6 – 26.0 26.0 – 32.9

Dimension Description Measurement


A Height to top of Stack 3.72m
B Height to top of engine compartment 2.72m
C Height to top of ROPS 3.77m
D Hinge pin height at carry position .453m
E Dump clearance at full lift and 45* discharge angle 3.27m
F Hinge pin height at full lift 4.5m
G Maximum overall height 6.36m
H Maximum digging depth .125m
J Machine centre point to axle 1.85m
K Wheel base 3.7m
L Radius of tire .867m
M Maximum overall length 9.47m
N Reach at full tilt 1.53m
O Maximum rollback at maximum lift 61*
P Maximum rollback at carry height 49*
Q Maximum rollback at ground 41*
Ground Clearance .442m
Tread width 2.44m
Width over tyres 3.25m
Specifications

Item Specification
Flywheel Power Gross 293 kw

Engine Model C15 ATAAC


Rated Engine RPM 1800
No Cylinders 6
Max forward speed 36.3 km
Max reverse speed 41.5 km
Hydraulic cycle time (raise, dump, lower) 11.5 sec
Fuel tank Capacity 479 L
Hydraulic tank Capacity 125 L

Performance Data

Item Measurement
Bucket Capacity (heaped) 4.7m3
Operating Load at rated capacity 9 233kg
Struck capacity 4.0m3
Tipping load straight 21 129kg
Static tipping load full turn 18 466kg
Breakout force 197 kN
Operating weight 30 361kg

You might also like