Scribd Logo
Upload

Welcome to Scribd!

  • 49 views

    Camry TSB Evap System Codes T-EG003-98

    Uploaded by

    Janet Wert
    This document provides diagnostic and repair procedures for check engine lights and codes P0441 and P0446 related to the evaporative emission control system on various Toyota models. For code P0441, the repair procedure involves removing and replacing hoses and the EVAP VSV and charcoal canister assembly. For code P0446, the procedure is to inspect hoses and pipes for leaks and replace the vapor pressure VSV and canister. The note indicates that code P0441 could be caused by debris blocking vapor lines or a stuck VSV.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Camry TSB Evap System Codes T-EG003-98

    Uploaded by

    Janet Wert
    49 views1 page
    This document provides diagnostic and repair procedures for check engine lights and codes P0441 and P0446 related to the evaporative emission control system on various Toyota models. For code P0441, the repair procedure involves removing and replacing hoses and the EVAP VSV and charcoal canister assembly. For code P0446, the procedure is to inspect hoses and pipes for leaks and replace the vapor pressure VSV and canister. The note indicates that code P0441 could be caused by debris blocking vapor lines or a stuck VSV.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides diagnostic and repair procedures for check engine lights and codes P0441 and P0446 related to the evaporative emission control system on various Toyota models. For code P0441, the repair procedure involves removing and replacing hoses and the EVAP VSV and charcoal canister assembly. For code P0446, the procedure is to inspect hoses and pipes for leaks and replace the vapor pressure VSV and canister. The note indicates that code P0441 could be caused by debris blocking vapor lines or a stuck VSV.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    49 views1 page

    Camry TSB Evap System Codes T-EG003-98

    Uploaded by

    Janet Wert
    This document provides diagnostic and repair procedures for check engine lights and codes P0441 and P0446 related to the evaporative emission control system on various Toyota models. For code P0441, the repair procedure involves removing and replacing hoses and the EVAP VSV and charcoal canister assembly. For code P0446, the procedure is to inspect hoses and pipes for leaks and replace the vapor pressure VSV and canister. The note indicates that code P0441 could be caused by debris blocking vapor lines or a stuck VSV.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    ENGINE

    EG003–98
    Title:
    EVAP SYSTEM DIAGNOSIS: P0441/P0446
    Technical Service Models:

    BULLETIN RAV4, Tercel, Paseo, Camry, Avalon, Tacoma,


    April 3, 1998 4Runner, T–100

    Introduction The following procedure is recommended for repair of MIL “ON” conditions involving
    confirmed DTC P0441 and P0446.

    Affected All RAV4, Tercel, Paseo, Camry, Avalon, Tacoma, 4Runner, T–100 that display
    Vehicles codes P0441 or P0446.
    Repair A. Diagnostics for P0441:
    Affected Area
    Procedure
    1. Remove Vacuum Hoses between (shaded line)
    Vapor Pressure
    EVAP VSV and Charcoal Canister ECM Sensor
    and discard.
    VSV for
    2. If there is a metal vapor pipe VSV for Vapor
    between EVAP VSV and Charcoal EVAP Pressure
    Canister, clean inside of vapor Sensor
    pipe.
    3. Replace EVAP VSV and Charcoal
    Charcoal Canister Fuel Tank
    Canister assembly with new parts.
    4. Install new vacuum hoses
    between EVAP VSV and Charcoal Charcoal Canister Assembly (broken line)
    Canister.
    B. Diagnostics for P0446:
    1. Inspect vacuum hoses and pipes
    between EVAP (Purge) VSV and
    Charcoal Canister for leaks.
    2. Replace Vapor Pressure VSV and
    Canister.

    NOTE:
    When performing diagnostics for an occurrence of a MIL ”ON” condition, Diagnostic
    Trouble Code (DTC) P0441 may be result of debris in Evaporative Emission Control
    System. This may cause blockage of a vapor line, or a stuck VSV, as described in
    troubleshooting area of Repair Manual.

    Warranty OP CODE DESCRIPTION TIME OPN T1 T2


    Information
    N/A Not Applicable to Warranty – – – –

    Toyota Supports ASE Certification Page 1 of 1

    You might also like