Operating Systems Notes

Download as pdf or txt
Download as pdf or txt
You are on page 1of 17

Unit 1: Introduction to Operating System

Unit 1: Introduction to Operating System Notes

CONTENTS
Objectives
Introduction
1.1 Operating System: Meaning
1.2 History of Computer Operating Systems
1.3 Supervisor and User Mode
1.4 Goals of an Operating System
1.5 Generations of Operating Systems
1.5.1 0th Generation
1.5.2 First Generation (1951-1956)
1.5.3 Second Generation (1956-1964)
1.5.4 Third Generation (1964-1979)
1.5.5 Fourth Generation (1979 – Present)
1.6 Summary
1.7 Keywords
1.8 Self Assessment
1.9 Review Questions
1.10 Further Readings

Objectives
After studying this unit, you will be able to:
Define operating system
Know supervisor and user mode
Explain various goals of an operating system
Describe generation of operating systems

Introduction
An Operating System (OS) is a collection of programs that acts as an interface between a user
of a computer and the computer hardware. The purpose of an operating system is to provide
an environment in which a user may execute the programs. Operating Systems are viewed as
resource managers. The main resource is the computer hardware in the form of processors,
storage, input/output devices, communication devices, and data. Some of the operating system
functions are: implementing the user interface, sharing hardware among users, allowing users
to share data among themselves, preventing users from interfering with one another, scheduling
resources among users, facilitating input/output, recovering from errors, accounting for resource
usage, facilitating parallel operations, organising data for secure and rapid access, and handling
network communications.

LOVELY PROFESSIONAL UNIVERSITY 1


Operating System

Notes 1.1 Operating System: Meaning


An operating system (sometimes abbreviated as “OS”) is the program that, after being initially
loaded into the computer by a boot program, manages all the other programs in a computer.
The other programs are called applications or application programs. The application programs
make use of the operating system by making requests for services through a defined Application
Program Interface (API). In addition, users can interact directly with the operating system
through a user interface such as a command language or a Graphical User Interface (GUI).

Figure 1.1: Operating System Interface

Hard Drive

Computer
Mouse Operating System
Monitor
Video Card

Sound Card
Keyboard Speakers

In a computer system, you find four main components: the hardware, the operating system,
the application software and the users. In a computer system, the hardware provides the basic
computing resources. The applications programs define the way in which these resources are
used to solve the computing problems of the users. The operating system controls and coordinates
the use of the hardware among the various systems programs and application programs for the
various users.
You can view an operating system as a resource allocator. A computer system has many resources
(hardware and software) that may be required to solve a problem: CPU time, memory space,
files storage space, input/output devices etc. The operating system acts as the manager of these
resources and allocates them to specific programs and users as necessary for their tasks. Since
there may be many, possibly conflicting, requests for resources, the operating system must decide
which requests are allocated resources to operate the computer system fairly and efficiently.
An operating system is a control program. This program controls the execution of user programs
to prevent errors and improper use of the computer. Operating systems exist because: they are
a reasonable way to solve the problem of creating a usable computing system. The fundamental
goal of a computer system is to execute user programs and solve user problems.
While there is no universally agreed upon definition of the concept of an operating system, the
following is a reasonable starting point:
A computer’s operating system is a group of programs designed to serve two basic purposes:
1. To control the allocation and use of the computing system’s resources among the various
users and tasks, and
2. To provide an interface between the computer hardware and the programmer that simplifies
and makes feasible the creation, coding, debugging, and maintenance of application
programs.

2 LOVELY PROFESSIONAL UNIVERSITY


Unit 1: Introduction to Operating System

An effective operating system should accomplish the following functions: Notes


1. Should act as a command interpreter by providing a user friendly environment.
2. Should facilitate communication with other users.
3. Facilitate the directory/file creation along with the security option.
4. Provide routines that handle the intricate details of I/O programming.
5. Provide access to compilers to translate programs from high-level languages to machine
language.
6. Provide a loader program to move the compiled program code to the computer’s memory
for execution.
7. Assure that when there are several active processes in the computer, each will get fair and
non-interfering access to the central processing unit for execution.
8. Take care of storage and device allocation.
9. Provide for long term storage of user information in the form of files.
10. Permit system resources to be shared among users when appropriate, and be protected
from unauthorised or mischievous intervention as necessary.

Figure 1.2: Abstract View of the Components of a Computer System

User 1 User 2 User 3 User n

Compiler Assembler Text editor Database


system
Application programs

Operating System

Computer hardware

Though systems programs such as editors and translators and the various utility programs (such
as sort and file transfer program) are not usually considered part of the operating system, the
operating system is responsible for providing access to these system resources.
The abstract view of the components of a computer system and the positioning of OS is shown
in the Figure 1.2.

Task “Operating system is a hardware or software”. Discuss.

1.2 History of Computer Operating Systems


Early computers lacked any form of operating system. The user had sole use of the machine and
would arrive armed with program and data, often on punched paper and tape. The program
would be loaded into the machine, and the machine would be set to work until the program
completed or crashed. Programs could generally be debugged via a front panel using switches
and lights. It is said that Alan Turing was a master of this on the early Manchester Mark I machine,

LOVELY PROFESSIONAL UNIVERSITY 3


Operating System

Notes and he was already deriving the primitive conception of an operating system from the principles
of the Universal Turing machine.
Later machines came with libraries of support code, which would be linked to the user’s program
to assist in operations such as input and output. This was the genesis of the modern-day operating
system. However, machines still ran a single job at a time; at Cambridge University in England
the job queue was at one time a washing line from which tapes were hung with different colored
clothes-pegs to indicate job-priority.
As machines became more powerful, the time needed for a run of a program diminished and
the time to hand off the equipment became very large by comparison. Accounting for and
paying for machine usage moved on from checking the wall clock to automatic logging by the
computer. Run queues evolved from a literal queue of people at the door, to a heap of media on a
jobs-waiting table, or batches of punch-cards stacked one on top of the other in the reader, until
the machine itself was able to select and sequence which magnetic tape drives were online. Where
program developers had originally had access to run their own jobs on the machine, they were
supplanted by dedicated machine operators who looked after the well-being and maintenance
of the machine and were less and less concerned with implementing tasks manually. When
commercially available computer centers were faced with the implications of data lost through
tampering or operational errors, equipment vendors were put under pressure to enhance the
runtime libraries to prevent misuse of system resources. Automated monitoring was needed not
just for CPU usage but for counting pages printed, cards punched, cards read, disk storage used
and for signaling when operator intervention was required by jobs such as changing magnetic
tapes.
All these features were building up towards the repertoire of a fully capable operating system.
Eventually the runtime libraries became an amalgamated program that was started before the
first customer job and could read in the customer job, control its execution, clean up after it,
record its usage, and immediately go on to process the next job. Significantly, it became possible
for programmers to use symbolic program-code instead of having to hand-encode binary
images, once task-switching allowed a computer to perform translation of a program into binary
form before running it. These resident background programs, capable of managing multistep
processes, were often called monitors or monitor-programs before the term operating system
established itself.
An underlying program offering basic hardware-management, software-scheduling and
resource-monitoring may seem a remote ancestor to the user-oriented operating systems of
the personal computing era. But there has been a shift in meaning. With the era of commercial
computing, more and more “secondary” software was bundled in the operating system package,
leading eventually to the perception of an operating system as a complete user-system with
utilities, applications (such as text editors and file managers) and configuration tools, and having
an integrated graphical user interface. The true descendant of the early operating systems is
what we now call the “kernel”. In technical and development circles the old restricted sense of an
operating system persists because of the continued active development of embedded operating
systems for all kinds of devices with a data-processing component, from hand-held gadgets up
to industrial robots and real-time control-systems, which do not run user-applications at the
front-end. An embedded operating system in a device today is not so far removed as one might
think from its ancestor of the 1950s.

1.3 Supervisor and User Mode


Single user mode is a mode in which a multiuser computer operating system boots into a single
superuser. It is mainly used for maintenance of multi-user environments such as network
servers. Some tasks may require exclusive access to shared resources, for example running fsck
on a network share. This mode may also be used for security purposes – network services are

4 LOVELY PROFESSIONAL UNIVERSITY


Unit 1: Introduction to Operating System

not run, eliminating the possibility of outside interference. On some systems a lost superuser Notes
password can be changed by switching to single user mode, but not asking for the password in
such circumstances is viewed as a security vulnerability.
You are all familiar with the concept of sitting down at a computer system and writing documents
or performing some task such as writing a letter. In this instance, there is one keyboard and one
monitor that you interact with.
Operating systems such as Windows 95, Windows NT Workstation and Windows 2000
professional are essentially single user operating systems. They provide you the capability to
perform tasks on the computer system such as writing programs and documents, printing and
accessing files.
Consider a typical home computer. There is a single keyboard and mouse that accept input
commands, and a single monitor to display information output. There may also be a printer for
the printing of documents and images.
In essence, a single-user operating system provides access to the computer system by a single
user at a time. If another user needs access to the computer system, they must wait till the current
user finishes what they are doing and leaves.
Students in computer labs at colleges or University often experience this. You might also have
experienced this at home, where you want to use the computer but someone else is currently
using it. You have to wait for them to finish before you can use the computer system.

1.4 Goals of an Operating System


The primary objective of a computer is to execute an instruction in an efficient manner and to
increase the productivity of processing resources attached with the computer system such as
hardware resources, software resources and the users. In other words, you can say that maximum
CPU utilisation is the main objective, because it is the main device which is to be used for the
execution of the programs or instructions. Brief the goals as:
1. The primary goal of an operating system is to make the computer convenient to use.
2. The secondary goal is to use the hardware in an efficient manner.

1.5 Generations of Operating Systems


Operating systems have been evolving over the years. you will briefly look at this development
of the operating systems with respect to the evolution of the hardware/architecture of the
computer systems in this section. Since operating systems have historically been closely tied with
the architecture of the computers on which they run, you will look at successive generations of
computers to see what their operating systems were like. You may not exactly map the operating
systems generations to the generations of the computer, but roughly it provides the idea behind
them.
You can roughly divide them into five distinct generations that are characterized by hardware
component technology, software development, and mode of delivery of computer services.

1.5.1 0th Generation

The term 0th generation is used to refer to the period of development of computing, which predated
the commercial production and sale of computer equipment. You consider that the period might
be way back when Charles Babbage invented the Analytical Engine. Afterwards the computers
by John Atanasoff in 1940; the Mark I, built by Howard Aiken and a group of IBM engineers
at Harvard in 1944; the ENIAC, designed and constructed at the University of Pencylvania by

LOVELY PROFESSIONAL UNIVERSITY 5


Operating System

Notes Wallace Eckert and John Mauchly and the EDVAC, developed in 1944-46 by John Von Neumann,
Arthur Burks, and Herman Goldstine (which was the first to fully implement the idea of the
stored program and serial execution of instructions) were designed. The development of EDVAC
set the stage for the evolution of commercial computing and operating system software. The
hardware component technology of this period was electronic vacuum tubes.
The actual operation of these early computers took place without the benefit of an operating
system. Early programs were written in machine language and each contained code for initiating
operation of the computer itself.
The mode of operation was called “open-shop” and this meant that users signed up for computer
time and when a user’s time arrived, the entire (in those days quite large) computer system was
turned over to the user. The individual user (programmer) was responsible for all machine set
up and operation, and subsequent clean-up and preparation for the next user. This system was
clearly inefficient and dependent on the varying competencies of the individual programmer as
operators.

1.5.2 First Generation (1951-1956)

The first generation marked the beginning of commercial computing, including the introduction
of Eckert and Mauchly’s UNIVAC I in early 1951, and a bit later, the IBM 701 which was also
known as the Defence Calculator. The first generation was characterised again by the vacuum
tube as the active component technology.
Operation continued without the benefit of an operating system for a time. The mode was called
“closed shop” and was characterised by the appearance of hired operators who would select the
job to be run, initial program load the system, run the user’s program, and then select another
job, and so forth. Programs began to be written in higher level, procedure-oriented languages,
and thus the operator’s routine expanded. The operator now selected a job, ran the translation
program to assemble or compile the source program, and combined the translated object program
along with any existing library programs that the program might need for input to the linking
program, loaded and ran the composite linked program, and then handled the next job in a
similar fashion.
Application programs were run one at a time, and were translated with absolute computer
addresses that bound them to be loaded and run from these reassigned storage addresses set by
the translator, obtaining their data from specific physical I/O device. There was no provision for
moving a program to different location in storage for any reason. Similarly, a program bound to
specific devices could not be run at all if any of these devices were busy or broken.
The inefficiencies inherent in the above methods of operation led to the development of the
mono-programmed operating system, which eliminated some of the human intervention in
running job and provided programmers with a number of desirable functions. The OS consisted
of a permanently resident kernel in main storage, and a job scheduler and a number of utility
programs kept in secondary storage. User application programs were preceded by control or
specification cards (in those day, computer program were submitted on data cards) which
informed the OS of what system resources (software resources such as compilers and loaders; and
hardware resources such as tape drives and printer) were needed to run a particular application.
The systems were designed to be operated as batch processing system.
These systems continued to operate under the control of a human operator who initiated
operation by mounting a magnetic tape that contained the operating system executable code
onto a “boot device”, and then pushing the IPL (Initial Program Load) or “boot” button to initiate
the bootstrap loading of the operating system. Once the system was loaded, the operator entered
the date and time, and then initiated the operation of the job scheduler program which read
and interpreted the control statements, secured the needed resources, executed the first user

6 LOVELY PROFESSIONAL UNIVERSITY


Unit 1: Introduction to Operating System

program, recorded timing and accounting information, and then went back to begin processing Notes
of another user program, and so on, as long as there were programs waiting in the input queue
to be executed.
The first generation saw the evolution from hands-on operation to closed shop operation to the
development of mono-programmed operating systems. At the same time, the development of
programming languages was moving away from the basic machine languages; first to assembly
language, and later to procedure oriented languages, the most significant being the development
of FORTRAN by John W. Backus in 1956. Several problems remained, however, the most obvious
was the inefficient use of system resources, which was most evident when the CPU waited while
the relatively slower, mechanical I/O devices were reading or writing program data. In addition,
system protection was a problem because the operating system kernel was not protected from
being overwritten by an erroneous application program.
Moreover, other user programs in the queue were not protected from destruction by executing
programs.

1.5.3 Second Generation (1956-1964)

The second generation of computer hardware was most notably characterised by transistors
replacing vacuum tubes as the hardware component technology. In addition, some very important
changes in hardware and software architectures occurred during this period. For the most part,
computer systems remained card and tape-oriented systems. Significant use of random access
devices, that is, disks, did not appear until towards the end of the second generation. Program
processing was, for the most part, provided by large centralised computers operated under
mono-programmed batch processing operating systems.
The most significant innovations addressed the problem of excessive central processor delay
due to waiting for input/output operations. Recall that programs were executed by processing
the machine instructions in a strictly sequential order. As a result, the CPU, with its high speed
electronic component, was often forced to wait for completion of I/O operations which involved
mechanical devices (card readers and tape drives) that were order of magnitude slower. This
problem led to the introduction of the data channel, an integral and special-purpose computer
with its own instruction set, registers, and control unit designed to process input/output
operations separately and asynchronously from the operation of the computer’s main CPU near
the end of the first generation, and its widespread adoption in the second generation.
The data channel allowed some I/O to be buffered. That is, a program’s input data could be
read “ahead” from data cards or tape into a special block of memory called a buffer. Then, when
the user’s program came to an input statement, the data could be transferred from the buffer
locations at the faster main memory access speed rather than the slower I/O device speed.
Similarly, a program’s output could be written another buffer and later moved from the buffer
to the printer, tape, or card punch. What made this all work was the data channel’s ability to
work asynchronously and concurrently with the main processor. Thus, the slower mechanical
I/O could be happening concurrently with main program processing. This process was called
I/O overlap.
The data channel was controlled by a channel program set up by the operating system I/O
control routines and initiated by a special instruction executed by the CPU. Then, the channel
independently processed data to or from the buffer. This provided communication from the CPU
to the data channel to initiate an I/O operation. It remained for the channel to communicate
to the CPU such events as data errors and the completion of a transmission. At first, this
communication was handled by polling – the CPU stopped its work periodically and polled the
channel to determine if there is any message.
Polling was obviously inefficient (imagine stopping your work periodically to go to the post
office to see if an expected letter has arrived) and led to another significant innovation of the

LOVELY PROFESSIONAL UNIVERSITY 7


Operating System

Notes second generation – the interrupt. The data channel was able to interrupt the CPU with a
message – usually “I/O complete.” Infact, the interrupt idea was later extended from I/O to
allow signalling of number of exceptional conditions such as arithmetic overflow, division by
zero and time-run-out. Of course, interval clocks were added in conjunction with the latter, and
thus operating system came to have a way of regaining control from an exceptionally long or
indefinitely looping program.
These hardware developments led to enhancements of the operating system. I/O and data
channel communication and control became functions of the operating system, both to relieve
the application programmer from the difficult details of I/O programming and to protect the
integrity of the system to provide improved service to users by segmenting jobs and running
shorter jobs first (during “prime time”) and relegating longer jobs to lower priority or night time
runs. System libraries became more widely available and more comprehensive as new utilities
and application software components were available to programmers.
In order to further mitigate the I/O wait problem, system were set up to spool the input batch from
slower I/O devices such as the card reader to the much higher speed tape drive and similarly,
the output from the higher speed tape to the slower printer. In this scenario, the user submitted
a job at a window, a batch of jobs was accumulated and spooled from cards to tape “off line,”
the tape was moved to the main computer, the jobs were run, and their output was collected on
another tape that later was taken to a satellite computer for off line tape-to-printer output. User
then picked up their output at the submission windows.
Toward the end of this period, as random access devices became available, tape-oriented
operating system began to be replaced by disk-oriented systems. With the more sophisticated
disk hardware and the operating system supporting a greater portion of the programmer’s work,
the computer system that users saw was more and more removed from the actual hardware-
users saw a virtual machine.
The second generation was a period of intense operating system development. Also it was the
period for sequential batch processing. But the sequential processing of one job at a time remained
a significant limitation. Thus, there continued to be low CPU utilisation for I/O bound jobs and
low I/O device utilisation for CPU bound jobs. This was a major concern, since computers were
still very large (room-size) and expensive machines. Researchers began to experiment with
multiprogramming and multiprocessing in their computing services called the time-sharing
system.

Note A noteworthy example is the Compatible Time Sharing System (CTSS),


developed at MIT during the early 1960s.

Task CPU is the heart of computer system what about ALU.

1.5.4 Third Generation (1964-1979)

The third generation officially began in April 1964 with IBM’s announcement of its System/360
family of computers. Hardware technology began to use Integrated Circuits (ICs) which yielded
significant advantages in both speed and economy.
Operating system development continued with the introduction and widespread adoption of
multiprogramming. This marked first by the appearance of more sophisticated I/O buffering

8 LOVELY PROFESSIONAL UNIVERSITY


Unit 1: Introduction to Operating System

in the form of spooling operating systems, such as the HASP (Houston Automatic Spooling) Notes
system that accompanied the IBM OS/360 system. These systems worked by introducing two
new systems programs, a system reader to move input jobs from cards to disk, and a system
writer to move job output from disk to printer, tape, or cards. Operation of spooling system was,
as before, transparent to the computer user who perceived input as coming directly from the
cards and output going directly to the printer.
The idea of taking fuller advantage of the computer’s data channel I/O capabilities continued to
develop. That is, designers recognised that I/O needed only to be initiated by a CPU instruction –
the actual I/O data transmission could take place under control of separate and asynchronously
operating channel program. Thus, by switching control of the CPU between the currently
executing user program, the system reader program, and the system writer program, it was
possible to keep the slower mechanical I/O device running and minimizes the amount of time
the CPU spent waiting for I/O completion. The net result was an increase in system throughput
and resource utilisation, to the benefit of both user and providers of computer services.
This concurrent operation of three programs (more properly, apparent concurrent operation,
since systems had only one CPU, and could, therefore execute just one instruction at a time)
required that additional features and complexity be added to the operating system. First, the fact
that the input queue was now on disk, a direct access device, freed the system scheduler from the
first-come-first-served policy so that it could select the “best” next job to enter the system (looking
for either the shortest job or the highest priority job in the queue). Second, since the CPU was to be
shared by the user program, the system reader, and the system writer, some processor allocation
rule or policy was needed. Since the goal of spooling was to increase resource utilisation by
enabling the slower I/O devices to run asynchronously with user program processing, and since
I/O processing required the CPU only for short periods to initiate data channel instructions,
the CPU was dispatched to the reader, the writer, and the program in that order. Moreover, if
the writer or the user program was executing when something became available to read, the
reader program would preempt the currently executing program to regain control of the CPU
for its initiation instruction, and the writer program would preempt the user program for the
same purpose. This rule, called the static priority rule with preemption, was implemented in the
operating system as a system dispatcher program.
The spooling operating system in fact had multiprogramming since more than one program
was resident in main storage at the same time. Later this basic idea of multiprogramming was
extended to include more than one active user program in memory at time. To accommodate
this extension, both the scheduler and the dispatcher were enhanced. The scheduler became able
to manage the diverse resource needs of the several concurrently active used programs, and
the dispatcher included policies for allocating processor resources among the competing user
programs. In addition, memory management became more sophisticated in order to assure that
the program code for each job or at least that part of the code being executed, was resident in
main storage.
The advent of large-scale multiprogramming was made possible by several important hardware
innovations such as:
1. The widespread availability of large capacity, high-speed disk units to accommodate the
spooled input streams and the memory overflow together with the maintenance of several
concurrently active program in execution.
2. Relocation hardware which facilitated the moving of blocks of code within memory without
any undue overhead penalty.
3. The availability of storage protection hardware to ensure that user jobs are protected from
one another and that the operating system itself is protected from user programs.
4. Some of these hardware innovations involved extensions to the interrupt system in order
to handle a variety of external conditions such as program malfunctions, storage protection

LOVELY PROFESSIONAL UNIVERSITY 9


Operating System

Notes violations, and machine checks in addition to I/O interrupts. In addition, the interrupt
system became the technique for the user program to request services from the operating
system kernel.
5. The advent of privileged instructions allowed the operating system to maintain coordination
and control over the multiple activities now going on with in the system.
Successful implementation of multiprogramming opened the way for the development of a
new way of delivering computing services-time-sharing. In this environment, several terminals,
sometimes up to 200 of them, were attached (hard wired or via telephone lines) to a central
computer. Users at their terminals, “logged in” to the central system, and worked interactively
with the system. The system’s apparent concurrency was enabled by the multiprogramming
operating system. Users shared not only the system hardware but also its software resources and
file system disk space.
The third generation was an exciting time, indeed, for the development of both computer
hardware and the accompanying operating system. During this period, the topic of operating
systems became, in reality, a major element of the discipline of computing.

1.5.5 Fourth Generation (1979 – Present)

The fourth generation is characterised by the appearance of the personal computer and the
workstation. Miniaturisation of electronic circuits and components continued and Large Scale
Integration (LSI), the component technology of the third generation, was replaced by Very Large
Scale Integration (VLSI), which characterizes the fourth generation. VLSI with its capacity for
containing thousands of transistors on a small chip, made possible the development of desktop
computers with capabilities exceeding those that filled entire rooms and floors of building just
twenty years earlier.
The operating systems that control these desktop machines have brought us back in a full circle, to
the open shop type of environment where each user occupies an entire computer for the duration
of a job’s execution. This works better now, not only because the progress made over the years
has made the virtual computer resulting from the operating system/hardware combination so
much easier to use, or, in the words of the popular press “user-friendly.”
However, improvements in hardware miniaturisation and technology have evolved so fast that you
now have inexpensive workstation – class computers capable of supporting multiprogramming
and time-sharing. Hence the operating systems that supports today’s personal computers and
workstations look much like those which were available for the minicomputers of the third
generation.

Example: Microsoft’s DOS for IBM-compatible personal computers and UNIX for
workstation.
However, many of these desktop computers are now connected as networked or distributed
systems. Computers in a networked system each have their operating systems augmented with
communication capabilities that enable users to remotely log into any system on the network
and transfer information among machines that are connected to the network. The machines that
make up distributed system operate as a virtual single processor system from the user’s point of
view; a central operating system controls and makes transparent the location in the system of the
particular processor or processors and file systems that are handling any given program.

1.6 Summary
This unit presented the principle operation of an operating system. In this unit you had
briefly described about the history, the generations and the types of operating systems.

10 LOVELY PROFESSIONAL UNIVERSITY


Unit 1: Introduction to Operating System

An operating system is a program that acts as an interface between a user of a computer Notes
and the computer hardware.
The purpose of an operating system is to provide an environment in which a user may
execute programs.
The primary goal of an operating system is to make the computer convenient to use. And
the secondary goal is to use the hardware in an efficient manner.

1.7 Keywords
An Operating System: It is the most important program in a computer system that runs all the
time, as long as the computer is operational and exits only when the computer is shut down.
Desktop System: Modern desktop operating systems usually feature a Graphical user interface
(GUI) which uses a pointing device such as a mouse or stylus for input in addition to the
keyboard.
Operating System: An operating system is a layer of software which takes care of technical
aspects of a computer’s operation.

1.8 Self Assessment


Choose the appropriate answers:
1. GUI stands for
(a) Graphical Used Interface
(b) Graphical User Interface
(c) Graphical User Interchange
(d) Good User Interface
2. CPU stands for
(a) Central Program Unit
(b) Central Programming Unit
(c) Central Processing Unit
(d) Centralization Processing Unit
3. FORTRAN stands for
(a) Formula Translation
(b) Formula Transformation
(c) Formula Transition
(d) Forming Translation
4. VLSI stands for
(a) Very Long Scale Integration
(b) Very Large Scale Interchange
(c) Very Large Scale Interface
(d) Very Large Scale Integration

LOVELY PROFESSIONAL UNIVERSITY 11


Operating System

Notes 5. API stands for


(a) Application Process Interface
(b) Application Process Interchange
(c) Application Program Interface
(d) Application Process Interfacing
Fill in the blanks:
6. An operating system is a ........................ .
7. Programs could generally be debugged via a front panel using ........................ and lights.
8. The data channel allowed some ........................ to be buffered.
9. The third generation officially began in April ........................ .
10. The system’s apparent concurrency was enabled by the multiprogramming ........................

1.9 Review Questions


1. What is the relation between application software and operating system?
2. What is an operating system? Is it a hardware or software?
3. Mention the primary functions of an operating system.
4. Briefly explain the evolution of the operating system.
5. What are the key elements of an operating system?
6. What do you understand by the term computer generations?
7. Who give the idea of stored program and in which year? Who give the basic structure of
computer?
8. Give the disadvantages of first generation computers over second generation computers.
9. On which system, the second generation computers based on? What are the new inventions
in the second generation of computers?
10. Describe the term integrated circuit.
11. What is the significance of third generation computers?
12. Give the brief description of fourth generation computers. How the technology is better
than previous generation?
13. What is the period of fifth generation computers?
14. What are the differences between hardware and software?
15. What are the differences between system software and application software?

Answers: Self Assessment

1. (b) 2. (c) 3. (a) 4. (d)


5. (c) 6. control program 7. switches 8. I/O
9. 1964 10. operating system

12 LOVELY PROFESSIONAL UNIVERSITY


Unit 1: Introduction to Operating System

1.10 Further Readings Notes

Books Andrew M. Lister, Fundamentals of Operating Systems, Wiley.


Andrew S. Tanenbaum and Albert S. Woodhull, Systems Design and Implementation,
Prentice Hall.
Andrew S. Tanenbaum, Modern Operating System, Prentice Hall.
Colin Ritchie, Operating Systems, BPB Publications.
Deitel H.M., “Operating Systems, 2nd Edition, Addison Wesley.
I.A. Dhotre, Operating System, Technical Publications.
Milankovic, Operating System, Tata MacGraw Hill, New Delhi.
Silberschatz, Gagne & Galvin, “Operating System Concepts”, John Wiley & Sons,
Seventh Edition.
Stalling, W., “Operating Systems”, 2nd Edition, Prentice Hall.

Online links www.en.wikipedia.org


www.web-source.net
www.webopedia.com

LOVELY PROFESSIONAL UNIVERSITY 13


Operating System

Notes Unit 2: Operation and Function of Operating System

CONTENTS
Objectives
Introduction
2.1 Operations and Functions of OS
2.2 Types of Operating System
2.3 Operating System: Examples
2.3.1 Disk Operating System (DOS)
2.3.2 UNIX
2.3.3 Windows
2.3.4 Macintosh
2.4 Summary
2.5 Keywords
2.6 Self Assessment
2.7 Review Questions
2.8 Further Readings

Objectives
After studying this unit, you will be able to:
Describe operations and functions of operating system
Explain various types of operating system

Introduction
The primary objective of operating system is to increase productivity of a processing resource,
such as computer hardware or computer-system users. User convenience and productivity were
secondary considerations. At the other end of the spectrum, an OS may be designed for a personal
computer costing a few thousand dollars and serving a single user whose salary is high. In this
case, it is the user whose productivity is to be increased as much as possible, with the hardware
utilization being of much less concern. In single-user systems, the emphasis is on making the
computer system easier to use by providing a graphical and hopefully more intuitively obvious
user interface.

2.1 Operations and Functions of OS


The main operations and functions of an operating system are as follows:
1. Process Management
2. Memory Management
3. Secondary Storage Management
4. I/O Management

14 LOVELY PROFESSIONAL UNIVERSITY


Unit 2: Operation and Function of Operating System

5. File Management Notes


6. Protection
7. Networking Management
8. Command Interpretation.

Process Management

The CPU executes a large number of programs. While its main concern is the execution of user
programs, the CPU is also needed for other system activities. These activities are called processes.
A process is a program in execution. Typically, a batch job is a process. A time-shared user
program is a process. A system task, such as spooling, is also a process. For now, a process may
be considered as a job or a time-shared program, but the concept is actually more general.
The operating system is responsible for the following activities in connection with processes
management:
1. The creation and deletion of both user and system processes
2. The suspension and resumption of processes.
3. The provision of mechanisms for process synchronization
4. The provision of mechanisms for deadlock handling.

Memory Management

Memory is the most expensive part in the computer system. Memory is a large array of words or
bytes, each with its own address. Interaction is achieved through a sequence of reads or writes of
specific memory address. The CPU fetches from and stores in memory.
There are various algorithms that depend on the particular situation to manage the memory.
Selection of a memory management scheme for a specific system depends upon many factors, but
especially upon the hardware design of the system. Each algorithm requires its own hardware
support.
The operating system is responsible for the following activities in connection with memory
management.
1. Keep track of which parts of memory are currently being used and by whom.
2. Decide which processes are to be loaded into memory when memory space becomes
available.
3. Allocate and deallocate memory space as needed.

Secondary Storage Management

The main purpose of a computer system is to execute programs. These programs, together with
the data they access, must be in main memory during execution. Since the main memory is too
small to permanently accommodate all data and program, the computer system must provide
secondary storage to backup main memory. Most modem computer systems use disks as
the primary on-line storage of information, of both programs and data. Most programs, like
compilers, assemblers, sort routines, editors, formatters, and so on, are stored on the disk until
loaded into memory, and then use the disk as both the source and destination of their processing.
Hence the proper management of disk storage is of central importance to a computer system.

LOVELY PROFESSIONAL UNIVERSITY 15


Operating System

Notes There are few alternatives. Magnetic tape systems are generally too slow. In addition, they are
limited to sequential access. Thus tapes are more suited for storing infrequently used files, where
speed is not a primary concern.
The operating system is responsible for the following activities in connection with disk
management:
1. Free space management
2. Storage allocation
3. Disk scheduling.

I/O Management

One of the purposes of an operating system is to hide the peculiarities or specific hardware
devices from the user. For example, in UNIX, the peculiarities of I/O devices are hidden from the
bulk of the operating system itself by the I/O system. The operating system is responsible for the
following activities in connection to I/O management:
1. A buffer caching system
2. To activate a general device driver code
3. To run the driver software for specific hardware devices as and when required.

File Management

File management is one of the most visible services of an operating system. Computers can store
information in several different physical forms: magnetic tape, disk, and drum are the most
common forms. Each of these devices has it own characteristics and physical organisation.
For convenient use of the computer system, the operating system provides a uniform logical view
of information storage. The operating system abstracts from the physical properties of its storage
devices to define a logical storage unit, the file. Files are mapped, by the operating system, onto
physical devices.
A file is a collection of related information defined by its creator. Commonly, files represent
programs (both source and object forms) and data. Data files may be numeric, alphabetic or
alphanumeric. Files may be free-form, such as text files, or may be rigidly formatted. In general
a files is a sequence of bits, bytes, lines or records whose meaning is defined by its creator and
user. It is a very general concept.
The operating system implements the abstract concept of the file by managing mass storage
device, such as types and disks. Also files are normally organised into directories to ease their
use. Finally, when multiple users have access to files, it may be desirable to control by whom and
in what ways files may be accessed.
The operating system is responsible for the following activities in connection to the file
management:
1. The creation and deletion of files.
2. The creation and deletion of directory.
3. The support of primitives for manipulating files and directories.
4. The mapping of files onto disk storage.
5. Backup of files on stable (non volatile) storage.
6. Protection and security of the files.

16 LOVELY PROFESSIONAL UNIVERSITY


Unit 2: Operation and Function of Operating System

Protection Notes

The various processes in an operating system must be protected from each other’s activities. For
that purpose, various mechanisms which can be used to ensure that the files, memory segment,
CPU and other resources can be operated on only by those processes that have gained proper
authorisation from the operating system.

Example: Memory addressing hardware ensures that a process can only execute within
its own address space. The timer ensures that no process can gain control of the CPU without
relinquishing it. Finally, no process is allowed to do its own I/O, to protect the integrity of
the various peripheral devices. Protection refers to a mechanism for controlling the access of
programs, processes, or users to the resources defined by a computer controls to be imposed,
together with some means of enforcement.
Protection can improve reliability by detecting latent errors at the interfaces between component
subsystems. Early detection of interface errors can often prevent contamination of a healthy
subsystem by a subsystem that is malfunctioning. An unprotected resource cannot defend
against use (or misuse) by an unauthorised or incompetent user.

Task “Memory is the most expensive part of system.” Discuss.

Networking

A distributed system is a collection of processors that do not share memory or a clock. Instead, each
processor has its own local memory, and the processors communicate with each other through
various communication lines, such as high speed buses or telephone lines. Distributed systems
vary in size and function. They may involve microprocessors, workstations, minicomputers, and
large general purpose computer systems.
The processors in the system are connected through a communication network, which can be
configured in the number of different ways. The network may be fully or partially connected.
The communication network design must consider routing and connection strategies and the
problems of connection and security.
A distributed system provides the user with access to the various resources the system maintains.
Access to a shared resource allows computation speed-up, data availability, and reliability.

Command Interpretation

One of the most important components of an operating system is its command interpreter. The
command interpreter is the primary interface between the user and the rest of the system.
Many commands are given to the operating system by control statements. When a new job is
started in a batch system or when a user logs-in to a time-shared system, a program which reads
and interprets control statements is automatically executed. This program is variously called
(1) the control card interpreter, (2) the command line interpreter, (3) the shell (in Unix), and so on.
Its function is quite simple: get the next command statement, and execute it.
The command statements themselves deal with process management, I/O handling, secondary
storage management, main memory management, file system access, protection, and
networking.

LOVELY PROFESSIONAL UNIVERSITY 17

You might also like