MODULAR QUIZ - 48 - Theory 3

MODULAR QUIZ - Module 48 - Theory 3
Total points1/20

SUBJECT CODE: VTH48B#
Email*
[email protected]
0 of 0 points
What is your full name? (LAST NAME, GIVEN NAME M.I.)*
Fernandez, Cornelio III J.
What school did you graduated from? (FULL NAME OF YOUR SCHOOL)*
Lyceum of the Philippines University - Cavite
What Section are you in?*

Section A
Section B
Section C
Section D
Section E
Section F
Section G
Section H
Section I
What is your Student number?*

2021-634
SITUATION 1:
0 of 3 points
A propped beam has a span of 9 m. and carries a concentrated load of 60 kN at point B. E =
15000 MPa, I = 150x10⁶ mm⁴.
SIT 1 FIGURE:

1. Which of the following gives the reaction at C.*
0/1
a. 32.12 kN

b. 33.67 kN
c. 34.87 kN
d. 31.11 kN
Correct answer
d. 31.11 kN

2. Which of the following gives the slope at C in degrees.*
0/1
a. 4.58°
b. 3.45°
c. 3.44°

d. 4.34°
Correct answer
a. 4.58°

3. Which of the following gives the deflection at B.*
0/1
a. -0.133 mm.
b. -0.335 mm.
c. -0.178 mm.
d. -0.335 mm.

Correct answer
c. -0.178 mm.
SITUATION 2:
1 of 2 points
A prismatic beam is loaded as shown in figure I;
SIT 2 FIGURE:

4. Which of the following gives the deviation at D, tD/C, from the tangent drawn at
C?*
1/1
a. -100/3EI

b. -150/EI
c. -200/3EI
d. -256/EI

5. Which of the following gives the value of the deflection at D?*
0/1
a. 97/EI
b. 89/EI
c. 74/EI

d. 66/EI
Correct answer
b. 89/EI
SITUATION 3:
0 of 3 points
From the given beam it has a cross-section of 75 x 150 mm.
SIT 3 FIGURE:

6. Which of the following gives the reaction at A?*
0/1
a. 941.51 N
b. 951.41 N

c. 941.78 N
d. 927.78 N
Correct answer
d. 927.78 N

7. Which of the following gives the moment at B?*
0/1
a. – 1874 N•m
b. – 1753 N•m

c. – 1649 N•m
d. – 1816 N•m
Correct answer
d. – 1816 N•m

8. Which of the following gives the max. flexural stress of the beam.*
0/1
a. 6.46 MPa
b. 5.12 MPa
c. 6.23 MPa
d. 5.17 MPa

Correct answer
a. 6.46 MPa
SITUATION 4:
0 of 3 points
A cantilever beam 3 m long carries a uniformly varying load zero at fixed to 1200 N/m at free
end. Assume that E = 10 GPa and I = 30 x 10x10⁶ mm⁴.

9. Which of the following most nearly gives the deflection at free end?*
0/1
a. 21.4 mm
b. 29.7 mm
c. 38.1 mm

d. 18.5 mm
Correct answer
b. 29.7 mm

10. Which of the following gives the deflection at a section 2 m from fixed end?*
0/1
a. 10.5 mm
b. 20.3 mm
c. 16.4 mm
d. 14.8 mm

Correct answer
c. 16.4 mm

11. Which of the following gives the rotation at a section 2 m from fixed end?*
0/1
a. 0.421°

b. 0.914°
c. 0.739°
d. 0.614°
Correct answer
c. 0.739°
SITUATION 5:
0 of 3 points
In the beam loaded as shown in the figure,
SIT 5 FIGURE:

12. Find the reaction at the left support.*
0/1
a. 30kN
b. 40 kN
c. 50 kN

d. 60 kN
Correct answer
a. 30kN

13. Find the moment at the right support*
0/1
a. 130kNm

b. 140 kNm
c. 190kNm
d. 160 kNm
Correct answer
c. 190kNm

14. Find the maximum positive beam moment*
0/1
a. 22.5kNm
b. 32.5kNm

c. 33.56kNm
d. 45.5kNm
Correct answer
a. 22.5kNm
SITUATION 6:
0 of 2 points
Given beam loaded as shown below. Assuming EI is constant.
SIT 6 FIGURE:

15. Which of the following gives the location of maximum deflection.*
0/1
a. 2.212 m
b. 1.958 m
c. 1.334 m

d. 1.456 m
Correct answer
b. 1.958 m

16. Which of the following the value of maximum deflection.*
0/1
a. 29.4/EI

b. 17.5/EI
c. 20.7/EI
d. 14.2/EI
Correct answer
b. 17.5/EI
SITUATION 7:
0 of 4 points
A 12 m long beam are simply supported beam has a 2m overhang at 2m from the left end and
at right end. It supports a distributed moving load of 9.35kN/m and a concentrated highway
load of 116 kN.

17. Find the maximum possible positive shear at 5m from right end.*
0/1
a. 71.6 kN
b. 69 kN
c. 44.7 kN
d. 59.6 kN

Correct answer
a. 71.6 kN

18. Find the maximum possible negative shear at 5m from right end.*
0/1
a. -53.1 kN
b. -62 kN
c. -69.7 kN
d. -50.4 kN

Correct answer
c. -69.7 kN

19. Find the maximum shear at said point if the highway load is placed at the
overhang end and the uniform load at places to cause maximum shear.*
0/1
a. 36.4 kN

b. 36.8 kN
c. 32.9 kN
d. 32.3 kN
Correct answer
b. 36.8 kN

PROBLEM 20: A propped beam having a span of 20 m carries a triangular load varies
from 10 kN/m at the fixed end to zero at the other support (simple support). Compute
moment at the fixed end.*
0/1
a. 133.33 kN.m
b. 266.67 kN.m
c. 177.55 kN.m
d. 322.44 kN.m

Correct answer
b. 266.67 kN.m

MODULAR QUIZ - 48 - Theory 3

Uploaded by

Copyright:

Available Formats

MODULAR QUIZ - 48 - Theory 3

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MODULAR QUIZ - 48 - Theory 3

Uploaded by

Copyright:

Available Formats

MODULAR QUIZ - Module 48 - Theory 3

What Section are you in?*

What is your Student number?*

You might also like