Scribd
Upload
239 views3 pages

Fault Code: 122 Intake Manifold 1 Pressure Sensor Circuit - Voltage Above Normal or Shorted To High Source

Uploaded by

Dung Pham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
239 views3 pages

Fault Code: 122 Intake Manifold 1 Pressure Sensor Circuit - Voltage Above Normal or Shorted To High Source

Uploaded by

Dung Pham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

9/21/22, 12:42 PM QuickServe Online | (4021533) 

  QSK38, QSK50 and QSK60 (CM850 Modular Common Rail System) Troubleshooting and Rep…

(/qs3/pubsys2/xml/en/manual/4021533/4021533-titlepage.html)

Fault Code: 122


Intake Manifold 1 Pressure Sensor Circuit - Voltage Above Normal
or Shorted to High Source

Overview
Codes Reason Effect
Fault Code: 122 Intake Manifold 1 Pressure
Sensor Circuit - Voltage
PID(P):
Above Normal or Shorted to None on performance for
SPN: 102
High Source. High signal Power Generation
FMI: 3/3
voltage detected at
the applications.
Lamp: Amber
intake manifold pressure
SRT: circuit.

Intake Manifold 1 Pressure Sensor Circuit QSK38 Power Generation Engines

https://quickserve.cummins.com/qs3/portal/service/manual/en/4021533/ 1/3
9/21/22, 12:42 PM QuickServe Online | (4021533)   QSK38, QSK50 and QSK60 (CM850 Modular Common Rail System) Troubleshooting and Rep…

Intake Manifold 1 Pressure Sensor Circuit QSK50 and QSK60 Power Generation Engines

Circuit Description
The intake manifold 1 pressure sensor monitors intake manifold pressure and passes the
information to the engine control
module (ECM) through the engine harness. If the intake
manifold 1 pressure sensor circuit voltage becomes too high, it will
cause a derate condition on
industrial applications.

Component Location
The intake manifold 1 pressure sensor is located in the left bank front air intake manifold. Refer to
Procedure 100-002 (/qs3/pubsys2/xml/en/procedures/05/05-100-002-tr.html) for a detailed
component location view.

Shoptalk
There are multiple ECMs for the engine models included in this manual. Each ECM has an
individual source address that displays
when INSITE™ electronic service tool is connected.
When troubleshooting a fault code, use the source address displayed in
INSITE™ electronic
service tool to determine which ECM and circuit is affected.

The intake manifold 1 pressure sensor shares supply and return wires in the engine harness with
other sensors. Opens and shorts
in the engine harness can cause multiple fault codes to be
active. Before troubleshooting Fault Code 122, check for multiple
faults.

Possible causes of this fault code include:

Open return circuit in the engine harness, connectors, or sensor

https://quickserve.cummins.com/qs3/portal/service/manual/en/4021533/ 2/3
9/21/22, 12:42 PM QuickServe Online | (4021533)   QSK38, QSK50 and QSK60 (CM850 Modular Common Rail System) Troubleshooting and Rep…

Signal wire shorted to sensor supply or battery voltage.

Refer to Troubleshooting Fault Code t05-122. (/qs3/pubsys2/xml/en/procedures/05/05-t05-122.html)

Last Modified:  29-May-2012

https://quickserve.cummins.com/qs3/portal/service/manual/en/4021533/ 3/3

You might also like